Unable to find my InfoArea in Query Designer

Hi all,
Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
Please advise.
Thank you.
TR.

Hi,
You need to create the Query first to Find the Info Area (relevant to that Query)
You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
Hope it helps

Similar Messages

Am not able to find 0SCM infoarea in query designer

I have installed business content infoarea Supply Chain Management 0SCM
cube Purchasing Data 0PUR_C01, and can see in infoprovider
I am not able to find 0SCM in query designer
Regards,
Vivek

Did u install any standard queries for 0PUR_C01?
If u have any existing queries on 0PUR_C01, then only u can see infoarea when u say 'OPEN' in QD..
otherwise u have to start with 'Create New', then navigate infoarea in QD

Unable to Create Instance of Essbase Query Designer

followed by Unable to Initialize Query Designer.Essbase v6.1Excel 97 sp2 iWin NT 4 sp5We are running into this error when trying to launch query designer."Unable to Create Instance of Essbase Query Designer"Query designer is checked in the addins before we try running it. We receive the messages. If we check the addins after we get the messages, query designer is unchecked.The Essbase addin works fine with no issues. Any thoughts on what this might be or how to troubleshoot it?Thanks.Mike

Update: is it possible that security rights to the Essbase directory would affect the Query Designer? On a machine that it works on, I've noticed that the "xla" file updates each time it is accessed.

To find the version of query designer currently installed in BI DEV

Hi.. Where can I find the version of query designer (BI addon) installed in my BI DEVsystem.

Hi,
At the time of opening query designer it will show .
Open query designer and on menu bar go to help tab and select about .
Thanks.

Can't find the ODS in query designer

Hi Gurus;
I am using SAP_BW 30B. I just created an ODS but I can't find the ODS under the InfoArea menu in query designer. I am not sure if it is related but, I tried to check the box for BEx Reporting under ODS settings. When I save or activate the ODS again the check in the box disappears. I can view other ODSs that are previousy created and non of them have a check for BEx Reporting under settings.
I tried to delete the entries in the ODS and try to check again but no difference.
Need your help.
Thanx a lot in advance;
Duygu Sile

HI,
Select the option, Create new query when you create for the first time on the ODS and after designing the query it will ask for the Infoprovider under which the query has to be saved,give the ODS name which you have created.Later Your ODS will be visible while creating queries.
Hope this helps..

Unable to see the variable in Query Designer

Hello Experts,
I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
Kindly let me know where is this Variable using in my query designer ?
Thanks,
Anoop

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

How to find static filter on Query designer

Hi expert,
I created one variable ZCALMON_V_001 on the infoObject ZCALMON, and this variable is used on two query (QueryA, QueryB) for filter functionality, however, I tested the queryA and QueryB by tcode RSRT1, I find there is static filter on info tab of result for QueryA, and there is NOT static filter on QueryB, please refer to picture, do you know the root cuase? Thanks.
Bst Regards,
Andrew

Hi Andrew,
In Query Designer for Query A, under Filter -> Characteristic Restrictions, there would be some static filters defined at query design time. These are called Static Filters because they have been hardcoded at design time & cannot be changed.on runtime. These Filters get fired at the Query level.
--Priya

Unable to see some Roles in Query designer

Hi all,
I have created a role in PFCG having some queries and assigned that role to my user id.
When i log into Query designer i m unable to see that role and all other roles i am able to see.
What could be the reason for this?
Did i missed to assign any authorizations?
Thanks,
Jaya.

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Unable to write a formula in query designer

Hi Experts,
while writing a formula in query designer in development system there is an error.
Formula is:
Grand total =1
when i write in the rows it is throwing the sytax error like " General syntax error in formula"
But the same formula has been written in production( this query is not available in development so that i am designing the same query in the development system).
some one give me an idea.
Thanks

Hi,
As i checked with implementation team and they have written the formula it has been assigned like Grand Total = 1.
i.e. Grand Total assign to 1.(But it is not Grand Total == 1).
Thanks for your support.
Thx
Edited by: satya prasad on Apr 27, 2010 7:44 AM

Unable to find Searchable Item in Query Criteria Map

Hi ,
Am try to personalize Advacned Search Region to Include new search Criteria in R12 iSupplier Portal->Home->Orders Tab->Advanced search.
Am trying to create new search field in the Add another row field through personalization.
I have created new row criteria,when am trying to create Query Criteria Map,Am unable to list the Searchable Item as it is Drop down list.
This causing unable to query the records based on the newly created row criteria item.
Please advise.
Thansk<Sarath.

Hi Jobnish,
There is no code in this requirement.
There is no error...Issue is unable to query data based on newly create criteria row in Advanced search.
I can give you navigation:
iSupplier Portal->Home->Orders Tab->Press advanced search Region
Click on the Personalize Page(I hope you know how to enable the personalize link using profile option).
In SupplierRN ->Advanced Search Criteria and creating custom item Criteria Row..
We need to map this field in Advanced Query Mapping.
However the issue is the Am unbale find the Searchable item (which is created in Criteria Row) in the drop downlist.
I can provide screen-shot if you need.
Thanks,Sarath.

Unable to Restrict Navigational Attribute in Query Designer

Hi BI Experts,
I had a Requirement to restrict on navigational attribute.......
i have checked in every levels such that
1.at info object level ....checked type as navigational
2.at info cube level checked the navigational on.
still iam unable to restrict on navigational attribute................in the context menu its giving the options cut, remove and where used list .........its not giving option to restrict...........
its very urgent ...........please give any suggestions how to restrict on navigational attr

Dear Ram,
Dont expand the InfoObject and see the Attributes ( They r Dis Attrs )
Just expand the Dimension --- Nav Attrs are available ?
Dont put them in Filter pane..( if available )
Drop them under Rows.
But restrict them under Default values ( By clicking on Filter pane ).
Regards,
Ram.

Infoareas do not at Query Designer and Analyzer

Dear frieds,
We are do not see the infoareas at Query designer and analyzer ( BW Quality ), in DEV is all right, what's happening ?
OBS: The user autority is equal in all clients.
Thanks.
Fabrício

Hi,
Are you not able to see any of the info areas or only some specific infoareas?
Regards
Akhan

Start SAP BW Query Designer button in Crystall Report is not find

Hi all
I installed Crystal Report 2008 SP1 and Integration Kit for SAP 3.1
After Integration Kit installed, I see in SAP Menu have Start SAP BW Query Designer button
But, when I update to Crystal Report SP2, I dont find Start SAP BW Query Designer button in SAP Menu
Can I help me enable Start SAP BW Query Designer button
Thanks

Hi,
the query designer can be started from the SAP BusinessExplorer menu items. the button has been removed from Crystal Reports
Ingo

Some infoproviders not appearing in query design

Hi experts,
when i try to create some query on infoproviders that are in BW, I cant find the same in query design.. Am i missing something...??
Thnaks
Dave

Hi Dave,
If your Info-providers does not have any associated query with it then you would not find it. You need to click the create button and you should be able to see all the info-providers.
In case your are unable to find an ODS then make sure the "Bex Reporting" checkbox is checked in the ODS settings checked.
Bye
Dinesh

Missing data fields in Query designer

Hi Guys,
A query exists on an ODS. There are few characteristics and navigational attributes in the ODS. In Query designer, on the left hand side under Dimensions,
i can see 'Data part' (for Data fields of ODS) and 'Key section' (for Key fields of ODS).
All but 2 fields (One data field and one navigational attribute of the ODS) are seen under 'Dart part' of the query designer.
Data field - Accounting Document number
Navigational attribute - Actual Acquisition Fiscal Year
What may the reason for those 2 fields not appearing.
Any help is greatly appreciated.

Hi,
I executed a query on the ODS using LISTCUBE. To my surprise, i can find both 0AC_DOC_NO and ZACQ_YR here. If i can find both these in LISTCUBE, why don't i find the same in the query designer. Even though i built a new query on the ODS in the query designer, i still can't find them in the query designer.
Thanks

Unable to find my InfoArea in Query Designer

Similar Messages

Maybe you are looking for