Unable to find My Nas server on BT HH4

Hi,
I have noticed that on occasions I am unable to locate the mac address of my Nas server on my network and the only option I seem to have is to factory reset my HH4 and previously my HH2.
Is there anyway I can get around this, for example the Nas server's IP address is say 192.168.1.67. can I port forward directly to the Nas server's IP address?
Thanks
Keith

You need to give the NAS a static IP address, outside of the DHCP range, then you can port forward to it.
These guides should help.
Using static IP addresses on your home network
Port forwarding problems
I know the HH2 works fine for port forwarding, but I have no info on the HH4 at present.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Unable to find the requested server on Blackberry 9900 Smartphone Simulator

I have downloaded the Blackberry 9900 and 9930 Simulator . When I launch the browser on the simulator ,It is showing unable to find the requested server.The device is connected through Wi-Fi.

Greetings and welcome to the Support Forums.
I am really not clear as to your specific question.
You want to be able to login to your work WiFi?
You want to be able to resend Service Book to your device... for what need?
Do you have the BlackBerry Data plan on your service provider account? If you're not sure, call them and ask.
Who is your service provider?
What other details can you provide?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[HELP] unable to find the requested server

Why every try connect trough WiFi shown error message "unable to find the requested server"
BB Storm II 9520,
Anyone can help....
TQ

OK, two things:
ON your BlackBerry, go to Options > Advanced > Browser.
Set that to HOTSPOT and save.
Now, connected to a WiFi router, open the internet browser on the BlackBerry try going to mobile.blackberry.com
Does it work?
Also, Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the mobile network internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
Thanks

Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio

Unable to find Microsoft.Office.Server.Search.dll

I am trying to develop a SharePoint Search Server application to run Queries through Console Application.
I need a reference to Microsoft.Office.Server.Search.dll for this to work. I tried looking for this DLL in list of Assemblies in "Add Reference" Modal. Also, based on MSDN article below, have also looked at
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
MSDN Arcticle: http://msdn.microsoft.com/en-us/library/office/jj163300%28v=office.15%29.aspx
I am unable to find this dll in either place. Where else can I look for this DLL? Is this something we need to download?
Thanks!

Found the solution.
%ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\ISAPI
was taking me to
C:\Program Files (x86)\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Instead of
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\ISAPI
Edit: Using %ProgramFiles% from Start>Run works fine and takes to C:\Program Files. Though using this path from Visual Studio causes this confusion.

Unable to find the requested server!!!!!!! WHY ???

Ok , Me and my wife bought the 9800 3 days ago we updated the software and pulled batterys and did the
KB02830 Send the service books for the BlackBerry Internet Service
all with NO luck.
I can log onto my home network (linksys WRT54GS) with no problem but at work were there is PUBLIC ACCESS (that everyone can use except meW/ cell and Ipod) I get that message i did the ping test ,diagnostics and all come up good, Sometimes ill get CNN and or YouTube. Why does this happen is there A fix ,is it in the programming ,the Network what? We will be most likely taken ours back to get Iphones.

Greetings and welcome to the Support Forums.
I am really not clear as to your specific question.
You want to be able to login to your work WiFi?
You want to be able to resend Service Book to your device... for what need?
Do you have the BlackBerry Data plan on your service provider account? If you're not sure, call them and ask.
Who is your service provider?
What other details can you provide?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error message - Unable to find proxy server - how can I solve this problem

When I try to enter some sites I get the error message: Unable to find the proxy server, Firefox is configured to use a proxy server that can't be found. This happened suddenly and I'm not sure why or how I can fix it, it doesn't help that most help site are blocked. Im using a Mac 10.5.8 and Firefox 15.

You can check the connection settings.
*Firefox > Preferences > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

WiFi unable to find requested server...

I have an 8120 Pearl and I successfully connected to my home WiFi network. But, whenever i try to access a website, google.com for example, I'm getting "unable to find the requested server". I don't have a BB data plan, but I shouldn't need one when using wifi, so what could it be? I have security enabled WPA and I'm able to connect using my iPhone and 3 laptops... does WPA have anything to do with it?
The browser is set to hotspot browser and also here are my wifi diagnostics:
WiFi
Current Profile: HZ_wifi
SSID: HZ_wifi
Security Type: Pre-Shared Key (PSK)
Local IP Address: 192.168.1.4
Signal level: -49dBm
Connection Data Rate: 48Mbps
Status: Network acquired
I've tried power cyclying the router and that didn't help, I am able to connect via wifi on my friends network so it can't be the phone, and its not the router, i can only think its that the two are incompatible, could this be the case?
Message Edited by giyad on 06-26-2009 11:17 AM

I do have the exact problem with my bold, I have my laptop and a nokia phone connected to home wi-fi and both working perfectly.
the issue with the bold is that it connects to the wi-fi network but it works only for few minutes and then the browser says: "Unable to find requested server" and the Wi-fi mark changes to gray after i was able to visit few sites. i dont have or intend to have a data plan as I have access to Wi-fi connection almost all the time. I have tried resetting the router and it didn't work. Any one with the right solution???

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

My Master server is stopping automatically unable to find out the issue

Dear Experts,
My Master server in CMC is stopping automatically and is going to infinite stop state.when i again restart manually its connecting but again it is stopping.what may be the cause unable to find the solution
Thanks in Advance,
Regards,
Vinay.G

Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
%

Unable to find the workbook on server while accessing woekbook

I am opening in query in Bex analyzer
After getting the result , I am saving the file as workbook in favourites folder
It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
Please help

Hi,
I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
Thanks a lot.
BR.
Angela

Unable to find workbook in the server

When we run 3.x workbook in 7.0 we are getting the following pop-up 'Unable to find workbook in the server'. We were able to open the workbook in the 3.x. Did any one face the same issue.The trace showns authorization are good. Pls. Help!!

Hi,
on thing I noticed... SP 13 is not that stable...
Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
Ciao
Joke

"unable to find certificate" in Sun One Web Server 6.1

I have created a CA and a self-signed cert with the certutil command as described at this URL: http://www.mozilla.org/projects/security/pki/nss/tools/certutil.html
I can use certutil to verify that the cert shows up with the nickname I gave it, and the -V option claims that it is a valid certificate. However, referencing that nickname in the server.xml gives me a "CORE1259: unable to find certificate testcert" error and the server dies. I wish I could do a screen capture but we don't allow connections into our lab environment. I have watched the server startup under truss and I can see that it is opening the correct cert8.db file and I can even see references to the certificate nickname in what it is reading, but still the error occurs. Has anyone else had this problem or have ideas on where to look next?

Is your cert marked as a user cert?certutil -d /opt/SUNWwbsvr/alias -P instance-hostname- -M -n testcert -t u,u,u

I received a message to upgrade my Firefox version . It went to successful completion but I get a message unable to find proxy server?

After updating to latest version of Firefox i am unable to access internet. Get message Unable to find proxy server. This update also disable internet explorer so I cannot use it to access either. The desktop that I am having trouble with is running Windows XP Professional.

hi, please check in the firefox ''menu ≡ > options > advanced > network > connection - settings...'' if firefox is set up to directly connect to the internet ('no proxy').
and maybe also run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan].

Unable to find My Nas server on BT HH4

Similar Messages

Maybe you are looking for