Unable to find OPMN under the services tab after an essbase re-install

Hi all,
We are getting a new Hyperion(epm 11.1.2.0) system ready for use.I got all foundation services installed and configured successfully.
after installing essbase, I had trouble configuring-so I had to re-install essbase- but after re-installing, I am unable to find OPMN under the services tab. Is there a way to invoke OPMN as a service?
If I try running OPMN.exe, it gives me the error:
ORACLE_HOME is not set
This is what I found in opmn.log:
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: D:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready.  Request handling enabled.
[2012-03-22T15:38:01][opmn][ERROR:1][17][OPMN][code:ons-listener]10.84.20.207,6712: BIND (Unknown error)
It seems OPMN is trying to bind to an incorrect IP address.I am not sure where the IP Address references can be changed.
Any suggestions?
Edited by: 784749 on Mar 22, 2012 12:40 PM
Edited by: 784749 on Mar 22, 2012 1:30 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

John,
I finally found a reference to an old server under opmn.xml(of all places). Once I resolved this, I was able to start OPMN.
But OPMN still doesn't show up as a service. I found some Oracle notes on how to setup the same. Hopefully, it will help.
If OPMN is not setup as service(started manually), will it still bring Essbase up? Currently it is not bringing up Essbase.
opmnctl status shows that essbase is down.

Similar Messages

  • TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit.  Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

    I am connecting my iPhone 5 to my Windows computer via USB.  This should open iTunes and start the sync process.  Instead of iTunes opening, I get the iTunes service agreement to which I must agree.  Then iTunes opens and begins to back up my phone.  It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected.  Hence the computer and the phone are not sharing information.  When I select the functions I want to sync, I must either replace or merge.  If I replace, I lose the information I recently put into my phone.  If I choose to merge, then I have duplicates of everything.
    How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
    I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
    Thanks for any help!
    Christine

    After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
    java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
    I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
    I've found that this fails with the error;
    INFO: This tool works only on Windows Platform. Exiting the program
    Which is strange considering this is Windows Server 2008 R2 64-bit
    DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

  • I can't find my podcasts in my iTunes app. I've checked under the 'more' tab but they aren't there. Help!

    I've looked under the 'more' tab in iTunes and the podcasts aren't there. The only way I can find them is if I search the individual podcasts. How do I get them back into my iTunes app?

    Well, in the iTunes app on my iPhone 4, I was able to search for "podcast" and get back a huge list of podcasts.  Once I selected one of them, it offered to "Open in PodCasts app", so that seems to work.  In the PodCasts app, it is fairly easy to search for podcasts, but I can't say that the app is the most intuitive to use.  I've struggled through with it since iOS 6 was released, and it seems to be workign better now with the latest few updates, but I have still found a few issues with it...

  • I can no longer find the organize bookmarks export to HTML item under the Bookmarks tab, in v where did it go? Using version 4.01

    I store and synchronize my bookmarks using HTML exporting it between laptop and other systems and I can no longer find it in the usual place under the Bookmarks tab. Using help just directed me to the usual location Bookmarks>Organize Bookmarks> Export HTML> which does not appear in my version of Firefox 4.01.

    You're welcome.
    Could you please click the "''Solved It''" button next to the post which solved the problem for you? This will help others searching for a solution to the same question.
    Thanks.

  • Cannot find "Structure" menu under the Insert tab.  Need it to insert a header

    I just downloaded a trial version of DW CS6 and am following the on-line tutorial, but cannot find the "Structure" option under the "Insert" tab when creating an HTML document.  Where di it go?

    I think the confusion here is you appear to be following along some resource for DWCC while using DWCS6.
    There are many changes between DWCS6 and DWCC. Actually, there are quite a few changes between DWCS6 Disk version and DWCS6 Cloud version with even more between both of those and DWCC (and now DWCC 2014).
    With the speed that Adobe applications are changing with the Creative Cloud delivery system, you really must make sure you are using the correct resource version for your program version.

  • Saw a poss solution to my prob of loosing tab groups when closing firefox It read ". Edit Preferences Privacy "I can't find prefernces under the edit menu"

    Firefox V30.0
    I saw a poss solution to my prob of loosing tab groups when closing firefox It read ". Edit > Preferences > Privacy "I can't find references under the edit menu" so cannot attempt the fix offered?

    Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
    The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
    The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved
    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data in the sessionstore.js file in the Firefox profile folder.
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Multiple_profile_files_created
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

  • I think someone might be hacking my computer.  I downloaded a free game last night and since then under the shared tab in my finder it says "hp002655a82ea0" and the only info I can get about it is that it is a pc.

    I downloaded a free game last night and since then under the shared tab in my finder it says "hp002655a82ea0" and the only info I can get about it is that it is a pc.  Then under console I see several "stealth mode connection" attempts ti TCP 192.168.1.107:##### from 74.125.225.82.443.  The second number has jumped around and sometimes starts with 192.  I dont really know what those numbers are but how do I stop them from attempting to get through my firewall and kick them out of my shared tab???  I encrypted all my files and made sure all sharing is turned off so I don't know what they are doing.  Thank you very much.

    Mac OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
    The most effective defense against malware is your own intelligence. All known Mac malware takes the form of trojans that can only operate if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install software, such as a “codec” or “plug-in,” that comes from that same site, or an unknown site, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
    “Cracked” versions of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" products for the Mac, as they're all counter-productive. If you need to be able to detect Windows malware in your files, use ClamXav -- nothing else.

  • I have imported from Microsoft Internet Explorer favorites, cookies, history and they are not available after importing under the Bookmarks tab. How do I find the import of favorites in firefox?

    When importing from Microsoft Internet Explorer I have successfully completed and clicked on finish. I am not finding my favorites under the Bookmarks tab. I have shut down Firefox and and restarted the browser and still not finding favorites. I also restarted the computer still not finding favorites imported from Microsoft Internet Explorer. How can I find the data imported from Microsoft Internet Explorer?

    You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Show All Bookmarks).
    If you can't find them in the "From Internet Explorer" folder then try this:
    * Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
    * Import the HTML file in Firefox: Bookmarks > Show All Bookmarks > Import & Backup > Import HTML: From File
    See also:
    * http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

  • Kobo APP download Docs, PDF's Kobo said to convert the PDF using Adobe Digital Editions, then I'd be able to upload to the Kobe APP via iTunes. Where is File Sharing under the Apps tab located?

    I've uploaded my PDF to Adobe Digital Editions, but can't find where on iTunes to select file sharing under the Apps Tab... as specified in the instructions in the Kobo APP for the iPhone... and a rep from Kobo told me it was possible.

    For future questions, this forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with an issue if you ask in the general iTunes forums.
    Regards.

  • HT5372 i cant access icloud from the under the settings tab in an ipad mini....

    I got my daughter an ipad mini for xmas this year. I set it up under my account, but as she was using it. it seemed like it would be easier if she had her own account. I deleted my info and did a factory reset. I then set it up under her own user id and everything was fine.
    My problem is....i cant access icloud from her ipad under the settings tab....it isnt highlighted.
    I can sign on at icloud.com so i know the user id is valid.
    Im not very tech savy and i really dont know a whole lot about mac products.
    Any help would be great!
    Thanks

    Hello fgrprez
    If you are unable to find the iCloud section in settings, navigate to Settings > iCloud or Settings > Mail, Contacts ,Calendars. If you choose the option to view it within Mai, Contacts, Calendars section and you do not see an iCloud account, then add it with the Add Account button.
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Regards,
    -Norm G.  

  • Is it possible that an 'check for updates' button can be added under the update tab instead of waiting for Thunderbird to check in the background please?!

    I'm not always able to 'catch' the update notification popup when it happens, and I do not wish to allow automatic updates without my approval. I have a rather 'sensitive' internet situation. Would it be possible to add a button under the updates tab to allow us to manually check for updates please? This would greatly help my situation.
    Thank you for your time
    Baseman

    Maybe what you called AppMenu is labeled differently as I cannot find that. And yes, the menu bar is visible. And the help menu only lists Help Contents, Troubleshooting Information, What's New, Release Notes, Restart With Add-ons disables, & About Thunderbird.
    If I click Tools, then Options, then Advanced I see the Update tab. In this tab is where one should find a button labeled 'check for updates'. I do not see that. My only options are:
    - Automatically Check For Updates
    ---Thunderbird
    ---Installed Add-ons
    -When Updates To Thunderbird Are Found
    ---Ask Me What I Want To Do
    ---Automatically Download And Install The Update
    -----Warn Me If This Will Disable Any Of My Add-ons
    "Show Update History" button
    -Use Background Service To Install Updates
    I've attached a screen shot of this menu

  • Easiest way to update all apps on iPhone 5S without having to click update for each one under the apps tab in iTunes

    After I've used the download all updates option under the updates tab in the iTunes library Apps view, when I plug in my device (iPad or iPhone) and go to the device apps view I now have a button to the right of each of those apps that says "update" instead of "remove" or "install".
    The problem is that my app library is enormous and often there are 20+ apps that had updates at one time and it's a royal pain having to scroll through the entire list to find the ones that have the "update" button that needs to be clicked.
    Unfortunately iTunes doesn't have a sorting option in the pulldown called "updated" to bring those to the top.
    Is there any way to easily select all of those apps rather than having to manually scroll through my whole library hunting for them just to click the update button?

    Hi Twilight_Face!
    You can always try a backup and restore in an attempt to get rid of these apps that were interrupted during the download and are no longer available:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.

    I have songs on my iPod Touch that I want to transfer to my music library. I can "see" my songs in the library under the iPod tab, but not in my general music library.
    I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
    Thanks,

    martyskidmore wrote:
    I purchased a new computer and I am trying to find the easiest way to transfer all my files over.
    1)  From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    2)  If you do not have access to the iTunes Library on your Old computer... or its Backup...
    See these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Why can't I find preferances in the edit tabs drop down menu?

    Although I had Indesign CS6 for over a year this is my first time using it . I want to set the default page size to inches, instead of using Indesigns default settings.  Following Terry Whites instruction From the video clip on YouTube I tried finding Preferances in the Edit tabs menu, But when I click on the edit tab I can't find preferances in the drop down menu. What am I doing wrong or what am I not doing. sombody please help me to change this setting. I know nothing about the measurement type that indesign uses as a default.
    Thank you, For your answers.
    laverne 

    If you use a Mac they'd be under the InDesign menu....

  • Why is the import tab missing under the file tab?

    Why is import missing under the file tab? I want to import bookmarks etc. from Safari into Firefox.

    You can find the Import menu entry in the Bookmarks Manager (Library)
    *Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
    *http://kb.mozillazine.org/Import_bookmarks

Maybe you are looking for

  • ICal on the Mac does not sync all entries

    I have several entries on my MacBook that do not show up after the syncing thru iTunes. I have told iTunes to replace my calendar on the iPhone with the one on my Mac. Didn't solve the problem. I only have one calendar ie Main I have reset syncing th

  • Mail Merge Possibilities

    Is it possible to have a mail merge with multiple different addresses but with two turned clockwise like the one in the picture?  is There maybe a script that could do something?

  • JSP,Struts and MySQL

    I have 2 date fields(say: from , to) in JSP. based on these date, i want to retrieve data from MySQL database. In Database, the date format is "yyyy-mm-dd" but i am using date picker in JSP for entering From date and TO date. Could you please help me

  • Where can I get a Twain driver for Sibelius 7

    I´m using OSX Maverick and the Photoscore program ask me to install a true TWAIN PRINTER DRIVER (no the Mac Pronter Driver). Is there any one that use PHOTOSCORE ? I ´d appreciate any  help... NitoR

  • Working time approval with MSS

    Hello, I am trying to configure the MSS in order to approve the recorded times. Using cProjects for resource handling I would like to see the times to approve in the hierarchy of the project (with project, phase and taks). I would like this hierarchy