"Unable to find PPoE server" - worked fine last night!

*The set up:*
Belkin ADSL modem (with ethernet jack)
TC 500gb
MacBook Air
I have the Belkin ADSL modem (not a router) connected to the Time Capsule using an ethernet cable. When I set up the modem, I used a web based interface to enter the username/password settings for my connection. The modem connected ok, and works fine.
During the Time Capsule set up procedure, I was asked how I wanted to connect to the internet. I was given the option of Ethernet, or PPoE.
Assuming Ethernet was the correct option to use, I selected this. However, an error message was received telling me that the amber light would not stop blinking until this was resolved.
I therefore changed the setting to the only other one available, which was PPoE. On the next screen, I was asked to enter my username/password for my internet connection, which I did.
This was successful, the light went green, and I could access the internet.
That was last night.
*The problem:*
This morning, I decided to change the name from "Chris's Time Capsule" to just "Time Capsule". After clicking update settings, I am now receiving the message about the amber blinking light again. I am told this issue needs to be resolved, and I can no longer access the internet.
So I have tried chosen Ethernet from the menu again, however this does not work. Choosing PPoE no longer works now either.
I'm confused why the device has suddenly decided to not work, despite working fine last night with exactly the same settings. Also, all I changed was the name of the device- I'm suprised this has resulted in the Time Capsule not working anymore.
Can anyone perhaps suggest a solution?
Thanks in advance!
-Chris

Hi Uma,
Open your SAP MMC and from menu option select file->add/remove snapin...
Click on add button and then select "SAP Systems manager".
Click next on the next screen and then specify System ID, Instance (as hostname instanceNumber) and then click on add button.
It will add this system in the list in sapmmc.
Regards,
Bhavik

Similar Messages

  • My ipad2 was working fine last night, but this morning is unable to connect to ANY wifi networks (though it can detect them).  All typical solutions fail.  What can i do?

    My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network.  While it can detect networks, it cannot connect to any (have tried at home and at work).  I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off.  None of the typical solutions I can find online seem to work.  HELP!

    You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments. 
    http://support.apple.com/kb/HT4199
    If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. 

  • HT1926 i had itunes on my pc for a number of years. worked fine last night even. today, nothing, screen gave error 7, windows error 126, tried removing and re-installing, still same message. says I am missing MSVCR80.dll

    I have had Itunes on my pc for years. Worked fine last night. Today it gave me a message missing MSVCR80.dll, tried reinstalling, didn't work. Removed Itunes completely, reinstalled. Didn't work. Same message. Any fix ideas?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99196)

  • This morning, my macbook pro won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    This morning, my macbook pro laptop won't turn on even though the battery is charged and power cord is working. it worked fine last night. what can i do?

    Try the suggestions in this support article:
    http://support.apple.com/kb/TS1367
    Ciao.

  • My charter email account was working fine last night and now today my mac book pro keeps requesting the password and when I enter it, it still cannot receive mail?

    Fairly new to mac, and today my charter email account keeps asking me for password which was working fine last night when I went to bed. Now today it states that it is not the correct password and I cannot get my mail? What should I do here?
    Thank you

    Hello zeern2003
    Start with the article below to troubleshoot issues with Mail sending and receiving email. You may not have to do every step, but pay attention to what is relevant. Start with using Connection Doctor to bring up a window that will tell you what could be the issue.     
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Regards,
    -Norm G.

  • I can't get my trackpad on my MacBook to click. It was working fine last night.

    I'm not sure if its the battery expanding (but since it was fine last night), it could be the battery expanding.
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    Clicks also won't happen when the area under the trackpad  gets dirty. 
    Does anyone know if there is a way to check to see if the battery is good without taking the MacBook apart?  Also, there is no error Exclamation Point, on the top right of the screen. That happened to my MacBook Pro, as well as an inability to click the trackpad.
    Any advice is greatly appreciated, Sean

    KaneoheSean wrote:
    Apple representatives told me that the battery expands to let us know the battery needs to be replaced and when it expands the enlarged battery  won't allow the trackpad to click, when your pressing it. 
    That's just not correct. Swelling in the battery is caused by overheating of one or more cells in the battery, followed an exothermic chemical reaction of the anode (usually lithium cobalt oxide). It can cause simple swelling or even complete failure in the battery (including fire). It is NOT something by design to tell us that the battery needs to be replaced. It is a runaway thermal process in the battery.
    Minor swelling might be ignored with no further issue. When in doubt, have the battery checked by Apple or an authorised repair centre.

  • My MacBook trackpad stopped working randomly today but I didn't do anything to damage it. I just upgraded to Snow Leopard 10.6.8 last night, but it worked fine last night. What is happening?

    Hi,
    So I have a late 2006 1.83 ghz Intel Core 2 Duo MacBook A1185. And last night I upgraded my software to Mac OS X Snow Leopard 10.6.8. And then this morning when I went to start doing work on it, my trackpad wouldn't allow me to click on anything. It would only scroll my little mouse icon around, so pretty much making my trackpad useless:/ So then I kind of had a panic attack and rebooted at least 10 times (no joke), and then remembered I had a external mouse I could use to plug in. So I plugged that in, and it worked fine as long as I didn't touch the trackpad at all. And then I got annoyed of that because it started to hurt my wrist, so I took out my battery(6 month old 3rd party battery), and then my trackpad started to work? I was slightly aggravated, and confused. So then I put the battery back in, and it stopped working again. So I am puzzled if it is just I need a better battery? Or to replace my trackpad and keyboard? Any advice would be greatly appreciated, so thank you in advance:)
    Thanks

    Ok, that's what I have done... I have Snow Leopard Installed, 10.8.6 and it's got Boot Camp 3.0.4... my questionis the Mac Windows Install Drivers you add after installing Windows. Windows looks terribly awkward and I'm guessing it has something to do with the ATI graphics card sofware the mac disk installed. Is is ok to use the one I created years ago? I can't seem to find a place to create a new one using the 10.8.6 and 3.0.4.
    When I orignially installed Boot Camp you had to create a disk using Boot Camp that you installed in Windows after the initial OS installation.

  • ICloud won't sync to my iPad. Worked fine last night!?

    My iCloud works fine on my iPhone5, but it won't sync with my iPad. It started last night. I have followed the instructions on the support site, deleted and reinstalled several times and nothing. Argh! Any advice?? I have an important email hanging in the outbox. Thanks!!! :)

    Is this how you sync them back to iPad? (Tap to enlarge image)

  • MBP won't turn on or charge, working fine last night

    I've got a 2009 MBP that has been working totally fine, I was using it last night and all was well. I closed the lid, went to bed, then came out this morning to a computer that wouldn't turn on. No light on the charging cable, no response from the power button, nothing. I then plugged my MBP into another charger from my wife's MBP-- nothing. Any help would be very much appreciated!

    If you push the little battery test button on the side of the computer (About the battery indicator lights on MacBook...), what does it show you?
    You can try Resetting the System Management Controller,  but you will most likely have to take the machine in to a service place for testing/repair.

  • My iPod isn't turning on nor is it flat because I've had it on charge for a few hours. My computer isn't picking it up and it worked fine last night.

    I've never had this problem before and it was fine a few hours ago!

    Try here:
    iOS: Not responding or does not turn on

  • IPad won't turn on...worked fine last night.

    iPad is blank and not turning on. Tried resetting pushing g home and sleep button

    Try a reset a few more times. Make sure you see the Apple Logo.
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • I keep getting 'unable to find requested server' while trying to go on internet

    I bought the Blackberry curve last week and have had pblms connecting to home wi fi.  I have it all set up and the fone recognises the wi fi on it and only let me connect once to the wi fi. After that it keeps coming up with the message - unable to find requested server - even though it did work once the first time after I had set up the wi fi wizard.  I had put in the key.  Can someone help please.

    Hi gerrybl,
    Welcome to the Suppport Forums!
    Can you provide more information please?
    Do you have a data plan with your wireless provider that includes internet browsing?
    Are you able to complete all the steps in this blog post to connect to Wi-Fi? http://bbry.lv/oXh7oV
    Are you able to connect to any other Wi-Fi networks or Hotspots?
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I am having the same slowness, irratic, unstable issues with Thunderbird that I had 9 months ago. T-bird worked fine last sunday but now is unstable,

    Slow to download email, slow to respond or open email, slow or unable to delete email, "A script on this page may be busy....error message when trying to delete an email. I had similar problems before (9 mo ago) but they went away after dealing with McAfee. Thunderbird worked fine last sunday but when I tried to use it today I now have all these problems.

    McAfee has been causing problems again this week, so the remedy remains the same:
    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

  • WiFi unable to find requested server...

    I have an 8120 Pearl and I successfully connected to my home WiFi network. But, whenever i try to access a website, google.com for example, I'm getting "unable to find the requested server". I don't have a BB data plan, but I shouldn't need one when using wifi, so what could it be? I have security enabled WPA and I'm able to connect using my iPhone and 3 laptops... does WPA have anything to do with it?
    The browser is set to hotspot browser and also here are my wifi diagnostics:
    WiFi
    Current Profile: HZ_wifi
    SSID: HZ_wifi
    Security Type: Pre-Shared Key (PSK)
    Local IP Address: 192.168.1.4
    Signal level: -49dBm
    Connection Data Rate: 48Mbps
    Status: Network acquired
    I've tried power cyclying the router and that didn't help, I am able to connect via wifi on my friends network so it can't be the phone, and its not the router, i can only think its that the two are incompatible, could this be the case?
    Message Edited by giyad on 06-26-2009 11:17 AM

    I do have the exact problem with my bold, I have my laptop and a nokia phone connected to home wi-fi and both working perfectly.
    the issue with the bold is that it connects to the wi-fi network but it works only for few minutes and then the browser says: "Unable to find requested server" and the Wi-fi mark changes to gray after i was able to visit few sites. i dont have or intend to have a data plan as I have access to Wi-fi connection almost all the time. I have tried resetting the router and it didn't work. Any one with the right solution???

  • Unable to find requested server

     have a contract with a data plan but when I try to use my wifi at home it says that I am connected but when I go to the internet brower it tells me "Unable to find requested server". This only happends on my wifi at home. My other devices work without a problem on my home wifi. What do I need to do to get my Blackberry Torch 9800 to work off from my home wifi?

    I had this problem untl I setup a Hom Network that included my smartphone which shows up with it's own separate IP address. My office PC is the host and it is ethernet or wired network. I have 2 wire gateway wifi modem and all is supported by my carrier. I feel confident if you contact your ISP and ask for help in setting up a Home Network your problem will be solved. Btw, make sure your wireless Customer Service is informed by their Internet Service Support and by yourself. Good luck

Maybe you are looking for

  • How to change default vertical page co-ordinates from center, to top?

    Hi There, We're having trouble understanding why InDesign centers the page instead of aligning the view to the top when switching pages (and copying and pasting) - and how to change this behavior. To understand what I'm talking about, do the followin

  • My new iPad asks for the PIN of my MacBook to sync.  How do I find the PIN?

    how can I sync all my devices?  Older MacBook, iPhone5 (these two sych via wi-fi)   I want my new iPad to do the same but it asks for my MacBook PIN number.   No idea what that is.  I have it syncing with iTunes now but only pics/music.   I want some

  • Most but not all iCalendar History has Gone

    iPhone 5 (iOS6) has about 10 calenders on it. Various Macs subscribe to all or 1 or 2 of these claendars = OK  (Even those on different accounts.) iPhone 4S (iOS7) subscribes to all of these, but as of a few days ago, suddenly almost all events befor

  • Icloud problem with regards to automatic downloading of photos

    Why is it that eversince my iphone 4s was upgraded from IOS 6 to IOS 7?, All of my newly taken photos from my iphone can not automatically download into my pc computer using windows 7. What should I do?

  • Problem saving docs outside libraries

    Saving documents from a library to disk (save as...) seems not to work with GW 7.0.2 (german). The files are stored with the name of the drive letter only, no extension! When saving multiple documents, only the last one is saved, and also with only t