Unable to find published output for this request
Hi All:
I have created a XML report (Data Template and the RTF) in EBS and the program runs fine.
Then I changed/modified the Data Template and updated the xml file. When I try to run the report after the change
the report completes normal but have no output and gives me "Unable to find published output for this request"
I can not figure out what I am missing..
Please help
Thanks,
Hi Octavio:
Thanks, This was helpful.
It works after I end dated the RTF template and then run the program again. Now I have the XML with my changes in and then I can modify the RTF and upload it again..
Thanks
Edited by: user10800212 on Jan 29, 2009 9:32 AM
Similar Messages
-
Unable to find the published output for this request - problem
Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regardsHi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein -
Getting error "Unable to find the published output for this request"
1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
ThanksI tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options. -
Error- Unable to find error text for this exception
Hi all,
I am facing the following problem in discoverer ,Please give me your advice.
while I am trying to open the workbook I am getting the following error
"Unable to find error text for this exception"
Could you please tell me how I can find why this warning is come ? or how I can solve this warning.
if I ignore this warning then the workbook is failing to open.
thanks and regards
senthil kumarHi,
Are you getting this problem with the Desktop, Plus or Viewer editions? It could be that the database is generating the exception. You will need to trace the database session to see the error.
Rod West -
What happens?. Unable to find error text for this exception
I4m trying to open a workbook and before doing anything it shows me the message "Unable to find error text from this exception", after this, it appears another one "attempt to open workbook failed". Help me to find why i4m not able to open the workbook, which could be the reason.
Thanks in advance.I think this has something to do with the folders that
you are using? Have you renamed an old folder and then
recreated another folder as its replacement?
Christopher -
My Macbook Pro Won't boot. Unable to find the driver for this platform
Hi there,
After doing some casual internet browsing earlier today (facebook + twitter etc) my laptop froze up. While I was able to click between windows, the ever faithful beach ball was there to ensure I couldn't really do anything, including making the dock appear when mousing towards the bottom. So I held down the power button to shut it down, and restarted. After the apple logo had sat there for quite some time I got a message something along the lines of:
Unable to find driver for this platform:\"ACPI\".In"@/SourceCache/xnu/xnu-1699.32.7/iokit/kernel
This was followed by a message telling me I needed to restart my computer using the power button. After several attempts all producing the same results, I was still in the same boat. So I sought some online help which lead me to boot into my recovery partition (holding down the option key at startup) and install the operating system again from there. However this is when I really started to panic. After selecting the recoverey partition the apple logo flipped between a no access symbol (that circle with a line through it) and the apple logo for a couple of seconds, before settling on the apple logo. But the recovery partition never loads and after some time I either get a symbol of a folder with a question mark in it or I similar message telling me to restart.
Next I tried plugging in my external hard drive with a few time machine backups as well as a carbon copy back up and another recovery partition. Using the external HD's recovery partition took me to a menu which the online help had initially promised where I could reinstall osx as well as use disc utitlity. So I tried to run the installer from here only to find my hard drive didn't show up in the list of destination volumes. The time machine and recovery partitions from my hard drives did, but I couldn't select these.
I then turned my attention to the disc utility and tried to repair my hard drive. I was unsure which one to select at first because there were two names for my hard drive; the first being the hard drives actual name (a samsung something or other) and the second was called 'Lion.' I started by repairing the samsung one and this was over in a few seconds saying it was successfully repaired. So I moved on to 'Lion' and this took a few moments, before stalling on a section saying "Updating boot support partitions for the volume as required." I was also advised to recover any data I could and restore I backup.
So that's where I'm currently at. I'd really hate to lose any recent data, as my last time machine back up was about a week ago and I'd made some substantial progress on a mix since then!
I'd really appreciate any help that anyone can offer,
Cheers!Just had another look in the disc utility and found that the samsung's partition scheme is set to master boot record, which is apprently used for windows partitions? I've no idea how this happend because When I originally formatted the drive I'm sure I would have set it to GUID partition table. Clicking on 'Lion' just gives dashes for the partition type, capacity and available space values.
-
How can a fix my macbook pro with a Panic Kernel "Unable to find a driver for this platform"?
After a required update, my computer shutdown and it has never start ups again! On the screen apears a msg saying
" Unable to fins deiver for this platform" \"ACPI"\ .\"@/Sourcecache/xnu/xnu-2050.20.9/iokit/Kernel/IOPLatformExpert.ccp:1548
Debugger called: <panic>
backtrace (CPU 0), Frame: Return Address ...You've posted this in the iPad forum.
-
Unable to find error Text for this exception/Attempt To open workbook fail
Hi,
I am getting this error when I am trying to run a workbook. I had changed one of the folders name in the business area. That folder had a item which was one of the parameters of the workbook.
Can somebody please help me revert back.If I want to change any folders name,is it not possible.
Thanks in advanceYou're allowed to change the folder name or the id name (via properties) but just not both at the same time (plus database reports have to be opened and saved).
But just changing the display name for an item shouldn't cause a problem (because Disco doesn't really look for the display name - it's just for us to understand what it is/does).
I think you'd know, but is it possible you changed the id name in properties to one that already existed and therefore someone's got an extension of _1 added?
Russ -
Unable to find an Output Post Processor service to post-process request
Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1: AR_ADJUSTMENTS COM_ADJ,
AR_PAYMENT_SCHEDULES P,
RA_CUST_TRX_LINE_GL_DIST REC,
RA_CUSTOMER_TRX A,
HZ_CUST_ACCOUNTS B,
RA_TERMS T,
RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_PARTIES PARTY,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
HZ_CUST_SITE_USES U_BILL
MSG-00500: DEBUG: Table 2: RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_CUST_ACCOUNTS B,
HZ_PARTIES PARTY,
HZ_CUST_SITE_USES U_BILL,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
AR_ADJUSTMENTS COM_ADJ,
RA_CUSTOMER_TRX A,
AR_PAYMENT_SCHEDULES P,
RA_TERMS T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State: TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code: 78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 6
MSG-05000: DEBUG: Height Max: 6
MSG-05000: DEBUG: Remit To Formatted... 11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name: VAUGHN
MSG-05000: DEBUG: Last Name: FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Ship To Formatted... VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
VasanthHussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth -
IllegalStateException:output stream is already being used for this request
How to read binary data in JSP. I know, in servlets it can be done and JSP can handle only character data. When i try to open res.getOutputStream(), it is throwing the following exception:"IllegalStateException:output stream is already being used for this request". Is there any workaround in JSP?
Can you save the file to a location in your server ? Even if you are creating a dynamic image, all you get is a byte array which can be stored in your server. If you can do so, you can set the content type and display the content as mentioned above.
-
unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print
I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist. -
Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"
As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -1554760125
Exit facility code: 852
Exit error code: 15939
Exit message: Failed to retrieve data for this request.
Start time: 2014-08-15 16:49:52
End time: 2014-08-15 16:50:06
Requested action: RunRules
Machine Properties:
Machine name: servername
Machine processor count: 8
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Stack:
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Can't view output for concurrent request
I apologize if this is a common error - I tried to research this in the forums but didn't find anything that I haven't already tried. I checked the OPP - it is running with 3 processes - no error in the log that I can see. I checked the profile for the OPP timeout and have increased it....
I have registered the data definition, registered and associated a template - created the concurrent program but when I try to run it completes with a warning and can't view output. The log states:
XDO Data Engine Version No: 5.6.3
Resp: 20420
Org ID : 81
Request ID: 2322744
All Parameters: PO=5026930
Data Template Code: GISDOSXML
Data Template Application Short Name: XXGISD
Debug Flag: N
{PO=5026930}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Unable to find an Output Post Processor service to post-process request 2322744.
Check that the Output Post Processor service is running.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
--------------------------------------also - I found a note on using the XML Republish Report and I tried it with the report I ran and it erred completely. Here is the log for the republish:
Oracle XML Publisher 5.6.3
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:683)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Caused by: oracle.xdo.parser.v2.XMLParseException: '=' missing in attribute.
at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
at oracle.xdo.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1556)
at oracle.xdo.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1461)
at oracle.xdo.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1394)
at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1225)
at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
... 17 more -
Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING
I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64 -
ERR-1002 Unable to find item ID for item "FLOW_SESSION"
Hi Guys,
I installed on the weekend HTMLDB on our new development server and installed version 1.5.1.0.12 (Oracle 10.1.0.3)
I imported our workspaces and applications.
However we are getting the err-1002 in the following scenario.
- logon to htmldb as a developer.
- run application
- Login page is show (as this is a secure application)
- Login with a test user account. We have setup our own aurhentication scheme, with our own user account table.
- Click login button and we get Error ERR-1002 Unable to find item ID for item "FLOW_SESSION" in application "113".
The only way to get around it is to setup a user account in our own user account table with the same name as your developer account or create a developer account in HTMLDB for the "test user account". I have set myself as a user in the "application account table".
But wait there is more. The "work a round" gets me in. Now I select the logout button and get the login page again.
I then try to login as the test user and get in ok.
Any idea what is happening here??Follow up debugger output
==========================
0.91: Processing point: AFTER_SUBMIT
0.91: ...PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end; Content-type: text/html; charset=WINDOWS-1252 Set-Cookie: LOGIN_USERNAME_COOKIE=dynamic;
0.91: ...PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => :FLOW_SESSION, P_FLOW_PAGE => :APP_ID||':1' ); Content-type: text/html; charset=WINDOWS-1252 Set-Cookie: WWV_CUSTOM-F_100_113=64513E8344E8C3CE; path=/; Location: f?p=113:1:18133698647045384719
0.92: Show ERROR page...
0.92: Processing point: AFTER_ERROR_HEADER
Error ERR-1002 Unable to find item ID for item "FLOW_SESSION" in application "113".
OK
0.92: Processing point: BEFORE_ERROR_FOOTER
Unexpected error, unable to find item name at application or page level.
0.92: ...Determine if user RAY with SGID 100 can develop application 113 in workspace 100
Maybe you are looking for
-
Is there a way to synchronize the Birthday Calendar with the iPhone? My other calendars all synchronize, but as that one is part of the contacts it does not. Contacts are synchronized with birthday information, but it does not put it into the calenda
-
Recent books on JSP & Servlets
Hi, I'm completely new to JSP. I spent almost the whole week-end installing and configuring tomcat. Now I've got it working. My problem was that I was using old information on older versions. Therefore, I searched the web for good introductions to JS
-
Security audit log doesn't capture services
Hello I am posting this on behalf of Carol, Would you please be kind on helping her? After the upgrade to ECC the t-codes for the ESS functions were changed to services that run via the portal. We need to find where the audit data is logged for t
-
Copy & paste details in bookmarks (into excel)..?
If you go to bookmarks > show all bookmarks, if you then click on a bookmark & copy it, only the address is copied, none of the other details in any visible columns e.g. 'Added', 'Visit Date' etc How can I copy & paste my bookmarks into a program lik
-
Trying to get iOS6 update on my iPad 2 but Software Updates doesn't show up under Settings>General on my iPad. How do I get the update then?