Unable to find RAID model type
Hi Everyone,
I am completely new to this Xraid and Xserve stuff. I have one of the old Xraid and I am trying to find out the model type for this raid.
After looking at the back panel, only thing I found is this:
512MB/512MB 720GB/2x2GB /FC
but nothing else. After doing controller reset, I was able to connect to RAID using RAID Admin Tools using IP address but still unable to find any model number.
Can anyone please help me with this?
Thanks,
I may be mistaken, but if you're trying to work out what model of XServe RAID you have I believe Apple only made the one.
If you mean working out what firmware version the controllers are running, if you go in to RAID Admin, then in the Components tab you should be able to click the picture of the controllers, and it should tell you on the right hand side what firmware you have (latest is 1.5.1c)
Similar Messages
-
Chnfind unable to find the decimal type by variable and sometimes "Round" command
Dear all,
During the work with Diadem I got two troubles. Could you please take a look and show me the wrong if you find the issue?
1.) Here is my trouble as we see the photo below. It is most important problem which I have. I really have no idea why it could happened. It is alway happened to find a value with decimal type's variable, and even that variable is changed to "str()".
setlocale("en-gb")
dim Min_point,Index_low,result
Min_point=val(Data.Root.ChannelGroups(1).Channels("CopyYangle").Properties("minimum").Value)
Min_point=round(Min_point,6)
Min_point=str(Min_point)
msgbox("The Min.Value is: "&Min_point)
Index_low=Chnfind("ch(""CopyYangle"")<="&Min_point&"", 1)
msgbox("Index No. of Min. Value is: "&Index_low)
Index_low=Chnfind("ch(""CopyYangle"")<=-0.11374 ", 1)
msgbox("Index No. of Min. Value is: "&Index_low)
2.) Still the problem with ChnFind() or ChnFindreverse(). If I change the Rounds off a number to the nearest integer with the function "Round()" it might not work in ChnFindreverse(). Such like it works under 4, 6, 8 and even 7 but doesn't work with 3 and 5. Is this logical?
setlocale("en-gb")
Dim XE, Xchannel, Ychannel,round_N0
Xchannel = "[2]/Right"
T1 = Xchannel
R1 =val(Data.Root.ChannelGroups(2).Channels("Right").Properties("maximum").Value)
round_N0=4 ' <========= 3 and 5 Not work, 4, 6, 7, 8 .... work
R1 =round(R1,round_N0) ' <=========
msgbox("Max. point is: " &R1 &VbCrlf& "Round Nr is: "&round_N0)
L1 = ChnFindReverse ("Ch(T1)>=R1",0)
msgbox("Index number for Max.Point is: "&L1 &VbCrlf& "Round Nr is: "&round_N0)
.tdx is a valid extensions for an attachement?
If you couldn't open the TMD file. Please remove ".tdv" the attacments file name to make sure it is "ChnFind.tdx" but not "ChnFind.tdx.tdv".
Kind regards / Mit freundlichen Grüßen
J.Huang
Attachments:
ChnFind.TDM 5 KB
ChnFind.tdx.tdv 39 KBHello J.Huang,
I downloaded the files and was able to get it to work. It looks like when you format the minimum value to a string, you loose precision and then ChnFind doesn't find the value your are looking for. He is an example which worked for me :
Set oChnY = Data.Root.ChannelGroups(2).Channels("Right")
sgValue = str(oChnY.Properties("minimum").Value,"d.ddddddddddddddd")
Index = ChnFindReverse("Y<="&sgValue,,Array("Y"),Array(oChnY))
LogFileWrite(Index)
Using symbols (parameters 3 and 4) is not necessary to get the solution. The key is teh second value for "str" which formats using more digits. As soon as you reduce the number of digits, you may no longer get a result.
Ther is an alternative to ChnFind, in case there is only one occurance in teh signal which has the minimum value
Set oChnY = Data.Root.ChannelGroups(2).Channels("Right")
Index = PNo(oChnY,oChnY.Properties("minimum").Value)
LogFileWrite(Index)
I hope one of the two options works for you. I tested the approach with teh first channel too and it worked as well -
Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING
I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64 -
Java.io.IOException: unable to find the type mapping resource file
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
> -
Unable to Find the Type Mapping Resource File (Two web services)
Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luisHello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis -
Unable to find type[ ]: make sure that the assembly containing this type is loaded.
I created an Enum, and while trying to run it by running the command [MyNamespace.MyEnum], I get the error that says
"Unable to find type[MyNamespace.MyEnum]: make sure that the assembly containing this type is loaded." This is what my enum looks like
$enum = "
namespace MyNamespace
public enum MyEnum
value1 = 0, value2 = 1
Add-Type -TypeDefinition $enum -Language CSharp
Does anyone have an idea why I keep getting this error? I really appreciate the suggestions. Thanks.Thanks for that feedback Peter Ziganki....I actually just got it to work as well. I had to run the code first to load it before running that command. Sorry I am new to PowerShell, so am making serious newbie mistakes:)
Thanks. -
Newfs error: "Unable to find Media type. Proceeding with system determined"
Hi,
I have the Solaris 10 update 6 installed on one server:
bash-3.00# more /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
bash-3.00#
I have noticed that if I run command newfs, I get the following error: "Unable to find Media type. Proceeding with system determined parameters."
bash-3.00# newfs /dev/md/rdsk/d100
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d100 last mounted as /export
newfs: construct a new file system /dev/md/rdsk/d100: (y/n)? y
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
/dev/md/dsk/d100 is mounted, can't mkfs
bash-3.00#
What does this error mean? It did not occurr in earlier versions of Solaris. Can it be ignored or maybe the syntax for newfs has changed and I am doing something incorrectly?
Thanks,
Przemek[natural weight loss diet|http://www.goarticles.com/cgi-bin/showa.cgi?C=1633072]
[confessions of a lazy super affiliate|http://www.squidoo.com/lazysuperaffiliate-reviewdetails]
[how to stop panic attacks|http://simple-fix.blogspot.com/2009/04/how-to-stop-panic-attacks-permanently.html]
[Acer AS4530-6823|http://www.goarticles.com/cgi-bin/showa.cgi?C=1638379]
Anwar [http://healthy-weight-loss-plan.info/about/index.html] -
Unable to find type [System.Managemet.Automation.PSCredential]
Hello,
I have module which has one of the parameters of type System.Managemet.Automation.PSCredential and yet when I try to run it complains about module being unknown. Not sure what's going on here. Declaration of my module is below
function RecycleMultiplePools{
[cmdletBinding(SupportsShouldProcess=$true,ConfirmImpact="High")]
param
[parameter(Mandatory=$true,ValueFromPipeline=$true,ParameterSetName="explicit")]
[string[]]$ComputerName,
[parameter(Mandatory=$false)]
[System.Managemet.Automation.PSCredential]$Credential,
[parameter(Mandatory=$true,ParameterSetName="FromDNS")]
[string]$SetName
Error i'm getting when running it is below
PS C:\WINDOWS\system32> RecycleMultiplePools
RecycleMultiplePools : Unable to find type [System.Managemet.Automation.PSCredential]. Make sure that the assembly that contains this type is loaded.
At line:1 char:1
+ RecycleMultiplePools
+ ~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (System.Managemet.Automation.PSCredential:TypeName) [], RuntimeException
+ FullyQualifiedErrorId : TypeNotFoundHi,
You've got a typo in Management:
[System.Management.Automation.PSCredential]
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing) -
Unable to find phone type in CUCM for manual registration
Hi
We are using CUCM 8.0.3 , unable to find Phone type Cisco 8831 for manual registration. How can I add this phone type to CUCM ? Any help is appreciated.Hi there,
+5 to my friends Mahmood & Nadeem here for their good ideas.
The problem here is that there is no Device Pack for CUCM 8.0.3 that supports the 8831 :( The ReadMe below is for the last/latest 8.0.3 device pack;
http://www.cisco.com/web/software/282074299/92918/cmterm-devicepack-8_0_3_24051-1_Readme.pdf
You would need to upgrade CUCM to a minimum of 8.5.1 and then install ;
Cisco Unified Communications Manager 8.5(1.17118-1) Device Package - Compatible UCM Version: 8.5
cmterm-devicepack8.5.1.17121-1.cop.sgn
Cheers!
Rob -
When I type any website like wikipidia or linkedIn that has initial page named as Home, I am going to some unknown website. It is happening for many other websites like yahoo, timesofindia, etc. Please help me, because I am unable to find root cause.
Apple does not give away its products.
Unless you are the 1,000th person to show up at a new Store and Tim Cook is there and his assistant is filming you to be posted on their Home Page.
That is yet another FaceBook SCAM. -
I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.
Argh that's frustrating! I never noticed that key did not work in InDesign.
A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
Maybe ask on the scripting forum? InDesign Scripting
I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
But the option to toggle this setting was scriptable. -
Unable to find data in s677 table
Hi I had maintained planned data in md63 for month 1-5 of 2012 but unable to find it in table s677, help.
Hi Allen,
Referring to replies:
1. You entered values directly in MD63
2. No updates in table-S677 or PBIM.
Let me clarify few things.
SIS-S677 is custom info structure (Not a standard SIS) designed to your requirement. That means you're working on S&OP Flexible Planning module.
So as a prerequisite to this module you must maintain below mix of Config & master data:
1. Sales Info Structure i.e. S677 with update groups & rules. To capture any sales history.
2. Planning Type: It's config and Planning type defines the content and the layout of the lines in the planning table.
3. Planning hierarchy: It's a Master data and is a combination of characteristic values based on the characteristics of one information structure.
4. Planning Table: It's the place where a Planning is done.
After all above set-up, you would be able to enter in Planning Table for planning the products.
Steps for Planning/Forecasting:
1. Based on your SIS Update groups & Rules, a S677 will be updated with sales quantities with Version-00 and same will be used to calculate forecast.
2. Using forecast model setup, a forecasting can be run in Planning Table for a particular product.
3. Forecast/planning values then will be saved in Planning Table. Once you save these values & come out of Planning Table, these values will be updated in S677 with version-A00.
4. Then you need to transfer Forecast/Planning values to Demand Management from Planning Table.
5. Check if values can be seen in Demand Management (MD63). If yes, a seperate SAP standard table-PBIM, PBHI etc. will be updated. These values in MD63 are called as Planned Ind Requirement (PIR).
6. Once PIR can be seen in MD63, you can run MRP Run.
7. Once MRP finished, you can go-ahead with further processing.
This is how the complete scenario is. Check if it's okay and then revert if any further issue.
Regards,
Anup -
Photoshop CS5 is unable to find the JavaScript plug-in.
I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in." It does this with an action that was designed for me to put the filename, copyright symbol, and studio name on 4x5 proofs. It also comes up when I try to use the keyboard shortcut Ctrl/Shift/W to close a file and go to bridge. There have been some other batch operations that will not load.
I have downloaded Java; trashed the Preferences in Photoshop and Bridge; and also uninstalled and re-installed CS5 and none of this has worked. Any ideas of what to do next?
Bob BrantAdobe Photoshop uses its own Javascript plugin not an external third party javescript. Its a required Plugin ScriptingSupport:
ScriptingSupport 15.1
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 32908 MB
Memory available to Photoshop: 37134 MB
Memory used by Photoshop: 94 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro 4000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.4052"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro 4000/PCIe/SSE2"
glgpu[0].GLRendererID=1757
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20140702000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro 4000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="340.52"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="6.5.12"
clgpu[0].CLBandwidth=7.49299e+010
clgpu[0].CLCompute=184.366
License Type: Subscription
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 175.6G free
C:\, 224.2G, 105.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.1
Plugin.dll Adobe Photoshop CC 2014 15.1
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.1
PSViews.dll Adobe Photoshop CC 2014 15.1
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.1 (2014.1.0 x001)
Accented Edges 15.1
Adaptive Wide Angle 15.1
Angled Strokes 15.1
Average 15.1 (2014.1.0 x001)
Bas Relief 15.1
BMP 15.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.1
Charcoal 15.1
Chrome 15.1
Cineon 15.1 (2014.1.0 x001)
Clouds 15.1 (2014.1.0 x001)
Collada 15.1 (2014.1.0 x001)
Color Halftone 15.1
Colored Pencil 15.1
CompuServe GIF 15.1
Conté Crayon 15.1
Craquelure 15.1
Crop and Straighten Photos 15.1 (2014.1.0 x001)
Crop and Straighten Photos Filter 15.1
Crosshatch 15.1
Crystallize 15.1
Cutout 15.1
Dark Strokes 15.1
De-Interlace 15.1
Dicom 15.1
Difference Clouds 15.1 (2014.1.0 x001)
Diffuse Glow 15.1
Displace 15.1
Dry Brush 15.1
Eazel Acquire 15.1 (2014.1.0 x001)
Embed Watermark 4.0
Entropy 15.1 (2014.1.0 x001)
Export Color Lookup NO VERSION
Extrude 15.1
FastCore Routines 15.1 (2014.1.0 x001)
Fibers 15.1
Film Grain 15.1
Filter Gallery 15.1
Flash 3D 15.1 (2014.1.0 x001)
Fresco 15.1
Glass 15.1
Glowing Edges 15.1
Google Earth 4 15.1 (2014.1.0 x001)
Grain 15.1
Graphic Pen 15.1
Halftone Pattern 15.1
HDRMergeUI 15.1
IFF Format 15.1
IGES 15.1 (2014.1.0 x001)
Ink Outlines 15.1
JPEG 2000 15.1
Kurtosis 15.1 (2014.1.0 x001)
Lens Blur 15.1
Lens Correction 15.1
Lens Flare 15.1
Liquify 15.1
Matlab Operation 15.1 (2014.1.0 x001)
Maximum 15.1 (2014.1.0 x001)
Mean 15.1 (2014.1.0 x001)
Measurement Core 15.1 (2014.1.0 x001)
Median 15.1 (2014.1.0 x001)
Mezzotint 15.1
Minimum 15.1 (2014.1.0 x001)
MMXCore Routines 15.1 (2014.1.0 x001)
Mosaic Tiles 15.1
Multiprocessor Support 15.1 (2014.1.0 x001)
Neon Glow 15.1
Note Paper 15.1
NTSC Colors 15.1 (2014.1.0 x001)
Ocean Ripple 15.1
OpenEXR 15.1
Paint Daubs 15.1
Palette Knife 15.1
Patchwork 15.1
Paths to Illustrator 15.1
PCX 15.1 (2014.1.0 x001)
Photocopy 15.1
Photoshop 3D Engine 15.1 (2014.1.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.1 (2014.1.0 x001)
Pinch 15.1
Pixar 15.1 (2014.1.0 x001)
Plaster 15.1
Plastic Wrap 15.1
PLY 15.1 (2014.1.0 x001)
PNG 15.1
Pointillize 15.1
Polar Coordinates 15.1
Portable Bit Map 15.1 (2014.1.0 x001)
Poster Edges 15.1
Radial Blur 15.1
Radiance 15.1 (2014.1.0 x001)
Range 15.1 (2014.1.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.1
Ripple 15.1
Rough Pastels 15.1
Save for Web 15.1
ScriptingSupport 15.1 <---------------------------------------------------------------------------------------- -----------------------------------------------------------------------------
Shake Reduction 15.1
Shear 15.1
Skewness 15.1 (2014.1.0 x001)
Smart Blur 15.1
Smudge Stick 15.1
Solarize 15.1 (2014.1.0 x001)
Spatter 15.1
Spherize 15.1
Sponge 15.1
Sprayed Strokes 15.1
Stained Glass 15.1
Stamp 15.1
Standard Deviation 15.1 (2014.1.0 x001)
STL 15.1 (2014.1.0 x001)
Sumi-e 15.1
Summation 15.1 (2014.1.0 x001)
Targa 15.1
Texturizer 15.1
Tiles 15.1
Torn Edges 15.1
Twirl 15.1
U3D 15.1 (2014.1.0 x001)
Underpainting 15.1
Vanishing Point 15.1
Variance 15.1 (2014.1.0 x001)
Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
Water Paper 15.1
Watercolor 15.1
Wave 15.1
Wavefront|OBJ 15.1 (2014.1.0 x001)
WIA Support 15.1 (2014.1.0 x001)
Wind 15.1
Wireless Bitmap 15.1 (2014.1.0 x001)
ZigZag 15.1
Optional and third party plug-ins:
CUR (Windows Cursor) NO VERSION
GREYCstoration NO VERSION
ICO (Windows Icon) NO VERSION
Reduce Noise 7.0.0.0
ScriptListener 13.0
StarFilter Pro 3 3.0.5.1
SuperPNG 2.0
Plug-ins that failed to load: NONE
Flash:
Adobe Kuler
Installed TWAIN devices: NONE -
[Solved] Unable to find root device
Hi guys,
it's been three days now that my laptop refuses to boot with a message from systemd like this:
ERROR: device 'UUID=xxx...' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=xxx...'.
You are being dropped to a recovery shell.
That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
[ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
[ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
[ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 519600(99%)
[ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
[ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
[ 0.000000] On node 0 totalpages: 1997309
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12786 pages used for memmap
[ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
[ 0.000000] Normal zone: 18360 pages used for memmap
[ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.984 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20140926
[ 0.020437] ACPI: All ACPI Tables successfully acquired
[ 0.021107] Security Framework initialized
[ 0.021114] Yama: becoming mindful.
[ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024297] Initializing cgroup subsys memory
[ 0.024302] Initializing cgroup subsys devices
[ 0.024304] Initializing cgroup subsys freezer
[ 0.024305] Initializing cgroup subsys net_cls
[ 0.024307] Initializing cgroup subsys blkio
[ 0.024325] CPU: Physical Processor ID: 0
[ 0.024326] CPU: Processor Core ID: 0
[ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025227] mce: CPU supports 7 MCE banks
[ 0.025238] CPU0: Thermal monitoring enabled (TM1)
[ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.026009] ftrace: allocating 20921 entries in 82 pages
[ 0.033432] dmar: Host address width 39
[ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
[ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.033572] HPET id 0 under DRHD base 0xfed91000
[ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
[ 0.033573] This will slightly decrease performance.
[ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.033713] Enabled IRQ remapping in xapic mode
[ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
[ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[ 0.067366] TSC deadline timer enabled
[ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.067404] ... version: 3
[ 0.067405] ... bit width: 48
[ 0.067406] ... generic registers: 4
[ 0.067407] ... value mask: 0000ffffffffffff
[ 0.067407] ... max period: 0000ffffffffffff
[ 0.067408] ... fixed-purpose events: 3
[ 0.067409] ... event mask: 000000070000000f
[ 0.090846] x86: Booting SMP configuration:
[ 0.090848] .... node #0, CPUs: #1
[ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.111723] #2 #3
[ 0.146545] x86: Booted up 1 node, 4 CPUs
[ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
[ 0.149839] devtmpfs: initialized
[ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
[ 0.152488] pinctrl core: initialized pinctrl subsystem
[ 0.152525] RTC time: 14:27:35, date: 01/29/15
[ 0.152613] NET: Registered protocol family 16
[ 0.163220] cpuidle: using governor ladder
[ 0.176565] cpuidle: using governor menu
[ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176606] ACPI: bus type PCI registered
[ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.176776] PCI: Using configuration type 1 for base access
[ 0.176783] dmi type 0xB1 record - unknown flag
[ 0.190254] ACPI: Added _OSI(Module Device)
[ 0.190257] ACPI: Added _OSI(Processor Device)
[ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
[ 0.527048] ACPI: Dynamic OEM Table Load:
[ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.540534] ACPI: Dynamic OEM Table Load:
[ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.553725] ACPI: Dynamic OEM Table Load:
[ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.607146] ACPI: Interpreter enabled
[ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.607184] ACPI: (supports S0 S3 S4 S5)
[ 0.607185] ACPI: Using IOAPIC for interrupt routing
[ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.608649] ACPI: Power Resource [PG00] (on)
[ 0.620317] ACPI: Power Resource [PG01] (on)
[ 0.640702] ACPI: Power Resource [PG02] (on)
[ 1.401836] ACPI: Power Resource [FN00] (off)
[ 1.401913] ACPI: Power Resource [FN01] (off)
[ 1.401986] ACPI: Power Resource [FN02] (off)
[ 1.402057] ACPI: Power Resource [FN03] (off)
[ 1.402127] ACPI: Power Resource [FN04] (off)
[ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.404193] PCI host bridge to bus 0000:00
[ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
[ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
[ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
[ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
[ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
[ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
[ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
[ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
[ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
[ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
[ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.614019] vgaarb: loaded
[ 1.614020] vgaarb: bridge control possible 0000:00:02.0
[ 1.614099] PCI: Using ACPI for IRQ routing
[ 1.615308] PCI: pci_cache_line_size set to 64 bytes
[ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
[ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 1.615428] NetLabel: Initializing
[ 1.615429] NetLabel: domain hash size = 128
[ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.615438] NetLabel: unlabeled traffic allowed by default
[ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.617497] Switched to clocksource hpet
[ 1.621576] pnp: PnP ACPI init
[ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.621755] system 00:00: [io 0xffff] has been reserved
[ 1.621756] system 00:00: [io 0xffff] has been reserved
[ 1.621758] system 00:00: [io 0xffff] has been reserved
[ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
[ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.001167] pnp: PnP ACPI: found 8 devices
[ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
[ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 2.007594] NET: Registered protocol family 2
[ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.008100] TCP: reno registered
[ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008195] NET: Registered protocol family 1
[ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.024532] PCI: CLS 64 bytes, default 64
[ 2.024577] Unpacking initramfs...
[ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
[ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
[ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.341843] Scanning for low memory corruption every 60 seconds
[ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.342061] Initialise system trusted keyring
[ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.343277] zpool: loaded
[ 2.343280] zbud: loaded
[ 2.343434] VFS: Disk quotas dquot_6.5.2
[ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.343557] msgmni has been set to 15200
[ 2.343599] Key type big_key registered
[ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.343779] io scheduler noop registered
[ 2.343781] io scheduler deadline registered
[ 2.343802] io scheduler cfq registered (default)
[ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.344363] vesafb: scrolling: redraw
[ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
[ 2.492136] Console: switching to colour frame buffer device 240x67
[ 2.639261] fb0: VESA VGA frame buffer device
[ 2.639278] intel_idle: MWAIT substates: 0x11142120
[ 2.639279] intel_idle: v0.4 model 0x45
[ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.639471] GHES: HEST is not enabled!
[ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.639854] Linux agpgart interface v0.103
[ 2.639890] rtc_cmos 00:01: RTC can wake from S4
[ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.640037] Intel P-state driver initializing.
[ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.640415] TCP: cubic registered
[ 2.640635] NET: Registered protocol family 10
[ 2.641104] NET: Registered protocol family 17
[ 2.641809] Loading compiled-in X.509 certificates
[ 2.641841] registered taskstats version 1
[ 2.642839] Magic number: 15:558:486
[ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
[ 2.643157] PM: Hibernation image not present or could not be loaded.
[ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 2.645137] Write protecting the kernel read-only data: 8192k
[ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
[ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
[ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
[ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
[ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
[ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
[ 2.657455] systemd-udevd[61]: starting version 218
[ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
[ 2.657510] systemd-udevd[61]: Load module index
[ 2.657562] systemd-udevd[61]: Created link configuration context.
[ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
[ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
[ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
[ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
[ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
[ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
[ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
[ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
[ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
[ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
[ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
[ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
[ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
[ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
[ 2.658188] systemd-udevd[61]: Unload module index
[ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
[ 2.658262] systemd-udevd[62]: set children_max to 16
[ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
[ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
[ 2.660575] systemd-udevd[67]: seq 678 running
[ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
[ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.660651] systemd-udevd[67]: seq 678 processed with 0
[ 2.714860] raid6: sse2x1 9342 MB/s
[ 2.771561] raid6: sse2x2 11848 MB/s
[ 2.828260] raid6: sse2x4 13887 MB/s
[ 2.884943] raid6: avx2x1 18356 MB/s
[ 2.941655] raid6: avx2x2 21230 MB/s
[ 2.998344] raid6: avx2x4 24583 MB/s
[ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
[ 2.998346] raid6: using avx2x2 recovery algorithm
[ 2.998547] xor: automatically using best checksumming function:
[ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
[ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 2.998639] systemd-udevd[67]: seq 679 running
[ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
[ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.998684] systemd-udevd[67]: seq 679 processed with 0
[ 3.031698] avx : 25444.800 MB/sec
[ 3.034144] systemd-udevd[62]: Validate module index
[ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
[ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
[ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034249] systemd-udevd[67]: seq 680 running
[ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
[ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034308] systemd-udevd[67]: seq 680 processed with 0
[ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
[ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034945] systemd-udevd[67]: seq 681 running
[ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
[ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034986] systemd-udevd[67]: seq 681 processed with 0
[ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
[ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035087] systemd-udevd[67]: seq 682 running
[ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
[ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035118] systemd-udevd[67]: seq 682 processed with 0
[ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
[ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035790] systemd-udevd[67]: seq 683 running
[ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
[ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
[ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035834] systemd-udevd[67]: seq 683 processed with 0
[ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
[ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
[ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035961] systemd-udevd[67]: seq 685 running
[ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
[ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
[ 3.035981] systemd-udevd[75]: seq 684 running
[ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.036004] systemd-udevd[67]: seq 685 processed with 0
[ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
[ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036031] systemd-udevd[75]: seq 684 processed with 0
[ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
[ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
[ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
[ 3.036165] systemd-udevd[76]: seq 686 running
[ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036180] systemd-udevd[75]: seq 688 running
[ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
[ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
[ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
[ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036215] systemd-udevd[75]: seq 688 processed with 0
[ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036231] systemd-udevd[76]: seq 686 processed with 0
[ 3.036257] Btrfs loaded
[ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
[ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
[ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
[ 3.036378] systemd-udevd[77]: seq 689 running
[ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
[ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
[ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036439] systemd-udevd[77]: seq 689 processed with 0
[ 3.036457] systemd-udevd[76]: seq 691 running
[ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
[ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036498] systemd-udevd[76]: seq 691 processed with 0
[ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
[ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
[ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036576] systemd-udevd[76]: seq 693 running
[ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
[ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
[ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
[ 3.036619] systemd-udevd[76]: seq 693 processed with 0
[ 3.036637] systemd-udevd[77]: seq 694 running
[ 3.036649] systemd-udevd[78]: seq 692 running
[ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
[ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036676] systemd-udevd[77]: seq 694 processed with 0
[ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
[ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.036698] systemd-udevd[78]: seq 692 processed with 0
[ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
[ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
[ 3.036801] systemd-udevd[80]: seq 695 running
[ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
[ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.036848] systemd-udevd[80]: seq 695 processed with 0
[ 3.036859] systemd-udevd[76]: seq 696 running
[ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
[ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
[ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
[ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
[ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
[ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036992] systemd-udevd[76]: seq 696 processed with 0
[ 3.037009] systemd-udevd[67]: seq 687 running
[ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
[ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037048] systemd-udevd[67]: seq 687 processed with 0
[ 3.037063] systemd-udevd[75]: seq 690 running
[ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
[ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.037097] systemd-udevd[75]: seq 690 processed with 0
[ 3.037372] udevadm[79]: calling: trigger
[ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
[ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
[ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
[ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
[ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
[ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
[ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
[ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
[ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
[ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
[ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
[ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
[ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
[ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
[ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
[ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
[ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
[ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
[ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
[ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
[ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
[ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
[ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
[ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
[ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
[ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
[ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
[ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
[ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
[ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
[ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
[ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
[ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
[ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
[ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
[ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
[ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
[ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
[ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
[ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
[ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
[ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
[ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
[ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
[ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
[ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
[ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
[ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
[ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
[ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
[ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
[ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
[ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
[ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
[ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
[ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
[ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
[ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
[ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
[ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
[ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
[ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
[ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
[ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
[ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
[ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
[ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
[ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
[ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
[ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
[ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
[ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037890] systemd-udevd[67]: seq 697 running
[ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
[ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
[ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
[ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
[ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037925] systemd-udevd[67]: seq 697 processed with 0
[ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
[ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037988] systemd-udevd[67]: seq 698 running
[ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
[ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038015] systemd-udevd[67]: seq 698 processed with 0
[ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
[ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038076] systemd-udevd[67]: seq 702 running
[ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
[ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
[ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038106] systemd-udevd[67]: seq 702 processed with 0
[ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
[ 3.038113] systemd-udevd[78]: seq 703 running
[ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
[ 3.038143] systemd-udevd[80]: seq 704 running
[ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
[ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038158] systemd-udevd[78]: seq 703 processed with 0
[ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
[ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
[ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038179] systemd-udevd[80]: seq 704 processed with 0
[ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038192] systemd-udevd[67]: seq 705 running
[ 3.038201] systemd-udevd[78]: seq 706 running
[ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
[ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
[ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
[ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038228] systemd-udevd[67]: seq 705 processed with 0
[ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
[ 3.038243] systemd-udevd[80]: seq 707 running
[ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038246] systemd-udevd[78]: seq 706 processed with 0
[ 3.038254] systemd-udevd[76]: seq 700 running
[ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
[ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038275] systemd-udevd[80]: seq 707 processed with 0
[ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
[ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038310] systemd-udevd[76]: seq 700 processed with 0
[ 3.038325] systemd-udevd[75]: seq 699 running
[ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
[ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038364] systemd-udevd[75]: seq 699 processed with 0
[ 3.038405] systemd-udevd[77]: seq 701 running
[ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
[ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038432] systemd-udevd[77]: seq 701 processed with 0
[ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
[ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
[ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038623] systemd-udevd[81]: seq 708 running
[ 3.038627] systemd-udevd[67]: seq 709 running
[ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
[ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
[ 3.038653] systemd-udevd[75]: seq 710 running
[ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
[ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
[ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
[ 3.038671] systemd-udevd[67]: seq 709 processed with 0
[ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
[ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
[ 3.038682] systemd-udevd[81]: seq 708 processed with 0
[ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
[ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038700] systemd-udevd[75]: seq 710 processed with 0
[ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
[ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038734] systemd-udevd[67]: seq 711 running
[ 3.038753] systemd-udevd[76]: seq 713 running
[ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
[ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
[ 3.038784] systemd-udevd[67]: seq 711 processed with 0
[ 3.038797] systemd-udevd[75]: seq 712 running
[ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038803] systemd-udevd[76]: seq 713 processed with 0
[ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
[ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038845] systemd-udevd[75]: seq 712 processed with 0
[ 3.038849] systemd-udevd[77]: seq 714 running
[ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
[ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
[ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038878] systemd-udevd[77]: seq 714 processed with 0
[ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
[ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
[ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
[ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
[ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038976] systemd-udevd[75]: seq 719 running
[ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
[ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
[ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
[ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039004] systemd-udevd[75]: seq 719 processed with 0
[ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
[ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
[ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039070] systemd-udevd[75]: seq 720 running
[ 3.039078] systemd-udevd[76]: seq 721 running
[ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
[ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039094] systemd-udevd[75]: seq 720 processed with 0
[ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
[ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.039133] systemd-udevd[76]: seq 721 processed with 0
[ 3.039146] systemd-udevd[67]: seq 715 running
[ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
[ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.039181] systemd-udevd[67]: seq 715 processed with 0
[ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039224] systemd-udevd[77]: seq 722 running
[ 3.039235] systemd-udevd[78]: seq 723 running
[ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
[ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
[ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
[ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.039267] systemd-udevd[77]: seq 722 processed with 0
[ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.039277] systemd-udevd[78]: seq 723 processed with 0
[ 3.039284] systemd-udevd[75]: seq 717 running
[ 3.039288] systemd-udevd[76]: seq 718 running
[ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
[ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
[ 3.039309] sysGuys, I think I've found the strange thing.
First, in the recovery shell, when I type "lvm lvscan", it prints:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
and then it says that all four my logical volumes root,boot,home and var are inactive.
So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
Last edited by rdm (2015-01-29 21:55:44) -
Unable to find a WSDL that has a definition for service
Dear all
I have a very simple composite applicationexposing a web service. When I deploy the application I get:
There was an error deploying the composite on soa_server1: Deployment Failed: Unable to find a WSDL that has a definition for service {http://soa/sf/login}bpelprocess1_client_ep and port loginPort_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.
However the build process shows no errors. The entire application was built using Jdeveloper 11.1.1.5 using a pre-constructed WSDL. The SOA suite is 11.1.1.5
Any pointers will be really appreciated.
Thanks
The composite is this:
<?xml version="1.0" encoding="UTF-8" ?>
<!-- Generated by Oracle SOA Modeler version 1.0 at [2/28/13 2:25 PM]. -->
<composite name="SOA2" revision="1.0" label="2013-02-28_14-25-14_553"
mode="active" state="on" xmlns="http://xmlns.oracle.com/sca/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
xmlns:ui="http://xmlns.oracle.com/soa/designer/">
<import namespace="http://soa/sf/login" location="loginToSFDC.wsdl"
importType="wsdl"/>
<service name="bpelprocess1_client_ep" ui:wsdlLocation="loginToSFDC.wsdl">
<interface.wsdl interface="http://soa/sf/login#wsdl.interface(loginPort)"/>
<binding.ws port="http://soa/sf/login#wsdl.endpoint(bpelprocess1_client_ep/loginPort_pt)"/>
</service>
<component name="BPELProcess1" version="2.0">
<implementation.bpel src="BPELProcess1.bpel"/>
<property name="bpel.config.transaction" type="xs:string" many="false">required</property>
</component>
<wire>
<source.uri>bpelprocess1_client_ep</source.uri>
<target.uri>BPELProcess1/bpelprocess1_client</target.uri>
</wire>
</composite>
The WSDL used to generate the BPEL is:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<definitions
targetNamespace="http://soa/sf/login"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns1="http://soa/sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:typ="urn:partner.soap.sforce.com"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<types>
<xsd:schema targetNamespace="http://uk.gov.fca.sf/login" elementFormDefault="qualified" xmlns:tns1="http://uk.gov.fca.sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com" xmlns:typ="urn:partner.soap.sforce.com"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="urn:partner.soap.sforce.com" schemaLocation="xsd/partner_types.xsd"/>
<xsd:import namespace="urn:fault.partner.soap.sforce.com" schemaLocation="xsd/partner_faults.xsd"/>
<xsd:import namespace="urn:sobject.partner.soap.sforce.com" schemaLocation="xsd/partner_objects.xsd"/>
</xsd:schema>
</types>
<message name="loginInMessage">
<part name="loginIn" element="typ:login"/>
<part name="LoginScopeHeaderIn" element="typ:LoginScopeHeader"/>
<part name="CallOptionsIn" element="typ:CallOptions"/>
</message>
<message name="loginOutMessage">
<part name="return" element="typ:loginResponse"/>
</message>
<portType name="loginPort">
<operation name="loginOp">
<input message="tns1:loginInMessage"/>
<output message="tns1:loginOutMessage"/>
</operation>
</portType>
<binding name="loginPortSOAP11Binding" type="tns1:loginPort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap:operation style="document" soapAction="http://soa:8101/login/loginOp"/>
<input>
<soap:body use="literal" parts="in"/>
</input>
<output>
<soap:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<binding name="loginPortSOAP12Binding" type="tns1:loginPort">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap12:operation style="document" soapAction="http://uk.gov.fca.sf:7101/login/loginOp" soapActionRequired="false"/>
<input>
<soap12:body use="literal" parts="in"/>
</input>
<output>
<soap12:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<service name="loginSrvc">
<port name="login_port_11" binding="tns1:loginPortSOAP11Binding">
</port>
<port name="login_port_12" binding="tns1:loginPortSOAP12Binding">
</port>
</service>
<partnerLinkType name="ProviderRole"
xmlns="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<role name="Role1">
<portType name="tns1:loginPort"/>
</role>
</partnerLinkType>
</definitions>Hi,
I don't see a loginPort_pt port in the wsdl, but it is referenced by the composite...
There's only ports login_port_11 and login_port_12 defined...
Cheers,
Vlad
Maybe you are looking for
-
When I try to pinch in and out on the trackpad it's not working, but then it will work on my desktop when I minimize firefox.
-
How to download past purchases on itunes 9.2.1?
Hi all. I have an old iMac g4 700 mhz computer. It is running mac osx 10.4.11 and has the latest version of itunes that apple allows it to have which is itunes 9.2.1. Now what I would REALLY like to know is how can I download my past purchases onto i
-
Services in cProjects accounting
Hi, Whenever I am trying to call different services from accounting tab of project, its getting failed as the requested ULR could not be retrieved. By observation i realised that the different host name and port URL is getting called. Please let me k
-
CS4 Installs but then INdesign , Illustrator won't open
Hello, Can anyone offer me advice on this issue with CS4? My DVDs Install ok but when trying to open InDesign and Illustrator I get the message, 'sorry InDesign needs to close' I then send an error report to Microsoft - but the product didn't open at
-
Check version & update application JAR
I've been doing some searches on goolge and sun.java.com, but haven't come up with anything that directly addresses my question: I would like to implement version checking for an application... ie when the application is launched, it checks with my s