Unable to find requested surver

Please help.
every time i try to browse the web at home on my curve 9300 with wifi i get the error message 'unable to find requested surver' if i turn wifi off then i can browse with no problems, i have a data plan and have tried the following:-
1, hard device re-boot
2, downgrade to previous software
3, reset my home router
4, turned off wifi, deleted my connection, re-boot then reconnect.
i have also checked trouble shooting and found that 'Blackberry infrastructure' has a connecting error.
im starting to pull what little hair i have left from my head so if anyone can help it would be very much appreciated.

Nothing to panic. If you have a data plan and no wifi connections are in range, then your device uses the data service from network operator. If you have any wifi connections within the range, device automatically start using WIFI instead of data service from service provider.
But don't try to turn off "Data Services" and try to access internet using WIFI coz it doesn't work.
Always Blackberry uses WIFI connection first(If available) and then Data service from Network service provider based on availability.
Daya

Similar Messages

  • Unable to find requested Data Object

    Hi,
    I import a standar data object in my DOE... It is a simple getlist and getdetail.
    I import all correctly, but when i activate it appear this error:
    "Unable to find requested Data Object"
    What happend?
    Thanks in advance,
    Regards,

    I delete de data object and the bappi, i create the bappi with the wizard, and now work fine the data object...
    Regards,

  • WiFi unable to find requested server...

    I have an 8120 Pearl and I successfully connected to my home WiFi network. But, whenever i try to access a website, google.com for example, I'm getting "unable to find the requested server". I don't have a BB data plan, but I shouldn't need one when using wifi, so what could it be? I have security enabled WPA and I'm able to connect using my iPhone and 3 laptops... does WPA have anything to do with it?
    The browser is set to hotspot browser and also here are my wifi diagnostics:
    WiFi
    Current Profile: HZ_wifi
    SSID: HZ_wifi
    Security Type: Pre-Shared Key (PSK)
    Local IP Address: 192.168.1.4
    Signal level: -49dBm
    Connection Data Rate: 48Mbps
    Status: Network acquired
    I've tried power cyclying the router and that didn't help, I am able to connect via wifi on my friends network so it can't be the phone, and its not the router, i can only think its that the two are incompatible, could this be the case?
    Message Edited by giyad on 06-26-2009 11:17 AM

    I do have the exact problem with my bold, I have my laptop and a nokia phone connected to home wi-fi and both working perfectly.
    the issue with the bold is that it connects to the wi-fi network but it works only for few minutes and then the browser says: "Unable to find requested server" and the Wi-fi mark changes to gray after i was able to visit few sites. i dont have or intend to have a data plan as I have access to Wi-fi connection almost all the time. I have tried resetting the router and it didn't work. Any one with the right solution???

  • I keep getting 'unable to find requested server' while trying to go on internet

    I bought the Blackberry curve last week and have had pblms connecting to home wi fi.  I have it all set up and the fone recognises the wi fi on it and only let me connect once to the wi fi. After that it keeps coming up with the message - unable to find requested server - even though it did work once the first time after I had set up the wi fi wizard.  I had put in the key.  Can someone help please.

    Hi gerrybl,
    Welcome to the Suppport Forums!
    Can you provide more information please?
    Do you have a data plan with your wireless provider that includes internet browsing?
    Are you able to complete all the steps in this blog post to connect to Wi-Fi? http://bbry.lv/oXh7oV
    Are you able to connect to any other Wi-Fi networks or Hotspots?
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Unable to find requested server

     have a contract with a data plan but when I try to use my wifi at home it says that I am connected but when I go to the internet brower it tells me "Unable to find requested server". This only happends on my wifi at home. My other devices work without a problem on my home wifi. What do I need to do to get my Blackberry Torch 9800 to work off from my home wifi?

    I had this problem untl I setup a Hom Network that included my smartphone which shows up with it's own separate IP address. My office PC is the host and it is ethernet or wired network. I have 2 wire gateway wifi modem and all is supported by my carrier. I feel confident if you contact your ISP and ask for help in setting up a Home Network your problem will be solved. Btw, make sure your wireless Customer Service is informed by their Internet Service Support and by yourself. Good luck

  • Unable to find an Output Post Processor service to post-process request

    Hi experts,
    Users complaining that they could not able to generate the PDF.
    User Complaint:
    The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
    EBS: 12.1.2
    OS: RHEL 5.5
    DB: 11.1.0.7.0
    Steps that we tried:
    1. Increased the OPP process to 16
    2. Increased Concurrent:OPP Response Timeout to 750
    3. There is no issue in manager log file.
    4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
    5. Restarted CM. Ran CMclean.
    6. Re: Output Post Processor
    7.Unable to View pdf Output File Created by XML Publisher
    But we dont find any solutions over the above.
    Log:
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    p_order_by='TRX_NUMBER'
    p_trx_number_low='8414037'
    p_trx_number_high='8414037'
    p_open_invoice='N'
    p_check_for_taxyn='N'
    p_choice='SEL'
    p_header_pages='1'
    p_debug_flag='Y'
    p_message_level='10'
    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    MSG-00100: DEBUG:  AfterPForm_Trigger +
    MSG-00100: DEBUG:  Multi Org established.
    MSG-00100: DEBUG:  AfterParam_Procs.Get_Country_Details
    MSG-00100: DEBUG:  Get_Country_Description.
    MSG-00100: DEBUG:  AfterParam_Procs.Switch_On_Debug
    MSG-00100: Running in debug mode
    MSG-00100: DEBUG:  AfterParam_Procs.Get_Trx_Number_Low
    MSG-00100: DEBUG:  AfterParam_Procs.Get_Trx_Number_High
    MSG-00100: DEBUG:  AfterParam_Procs.Get_Tax_Option
    MSG-00103: lp_trx_date_clause =  and a.trx_date = a.trx_date
    MSG-00100: DEBUG:  BeforeReport_Trigger.Build_Where_Clause
    MSG-00100: DEBUG:  P_Choice:  SEL
    MSG-00500: DEBUG:  About to build WHERE clause.
    MSG-00500: DEBUG:  WHERE clause built.
    MSG-00100: DEBUG:  Choice is other than ADJ, setting ORDER BY.
    MSG-00500: DEBUG:  Table 1:          AR_ADJUSTMENTS                         COM_ADJ,
            AR_PAYMENT_SCHEDULES                   P,
            RA_CUST_TRX_LINE_GL_DIST               REC,
            RA_CUSTOMER_TRX                        A,
            HZ_CUST_ACCOUNTS                       B,
            RA_TERMS                               T,
            RA_TERMS_LINES                         TL,  
            RA_CUST_TRX_TYPES                      TYPES,
            AR_LOOKUPS                             L_TYPES,
            HZ_PARTIES                        PARTY,
            HZ_CUST_ACCT_SITES                     A_BILL,
            HZ_PARTY_SITES                         PARTY_SITE,
            HZ_LOCATIONS                           LOC,
            HZ_CUST_SITE_USES                      U_BILL
    MSG-00500: DEBUG:  Table 2:          RA_TERMS_LINES                         TL,  
            RA_CUST_TRX_TYPES                      TYPES,
            AR_LOOKUPS                             L_TYPES,
        HZ_CUST_ACCOUNTS                       B,
            HZ_PARTIES                        PARTY,
            HZ_CUST_SITE_USES                      U_BILL,
            HZ_CUST_ACCT_SITES                     A_BILL,
            HZ_PARTY_SITES                         PARTY_SITE,
            HZ_LOCATIONS                           LOC,
            AR_ADJUSTMENTS                         COM_ADJ,
            RA_CUSTOMER_TRX                        A,
            AR_PAYMENT_SCHEDULES                   P,
            RA_TERMS                               T
    MSG-00500: DEBUG:  Where 1:  A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
    AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
    AND REC.LATEST_REC_FLAG = 'Y'
    AND REC.ACCOUNT_CLASS   = 'REC'
    AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                       'INV', 0,
                 = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
    AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
    AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
    AND A.COMPLETE_FLAG = 'Y'
    AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
    AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
    AND A.PRINTING_OPTION IN ('PRI', 'REP')
    AND L_TYPES.LOOKUP_CODE =
    DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
    AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
    AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
    AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
    AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
    AND A_BILL.party_site_id = party_site.party_site_id
    AND B.PARTY_ID = PARTY.PARTY_ID
    AND loc.location_id = party_site.location_id
    AND NVL(LOC.LANGUAGE,'US') = 'US'
    AND A.TERM_ID = TL.TERM_ID(+)
    AND A.TERM_ID = T.TERM_ID(+)
    AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
    MSG-00500: DEBUG:  Where 2:  A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
    AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
                                       'INV', 0,
                 = COM_ADJ.PAYMENT_SCHEDULE_ID(+)
    AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
    AND 'C'    = COM_ADJ.ADJUSTMENT_TYPE(+)
    AND A.COMPLETE_FLAG = 'Y'
    AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
    AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
    AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
    AND A.PRINTING_OPTION IN ('PRI', 'REP')
    AND L_TYPES.LOOKUP_CODE =
    DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
    AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
    AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
    AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
    AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
    AND B.PARTY_ID = PARTY.PARTY_ID
    AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
    AND NVL(LOC.LANGUAGE,'US') = 'US'
    AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
    AND T.TERM_ID = P.TERM_ID
    AND TL.TERM_ID(+) = T.TERM_ID
    MSG-00100: DEBUG:  AfterPForm_Trigger -
    MSG-00100: DEBUG:  BeforeReport_Trigger +
    MSG-00100: DEBUG:  BeforeReport_Procs.Populate_Printing_Option
    MSG-00100: DEBUG:  BeforeReport_Procs.Populate_Tax_Printing_Option
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Message_Details
    MSG-00100: DEBUG:  BeforeReport_Trigger.Get_Org_Profile.
    MSG-00100: DEBUG:  Organization Id:  26
    MSG-00100: DEBUG:  BeforeReport_Trigger -
    MSG-05000: DEBUG:  Trx No... 8414037
    MSG-00100: DEBUG:  Get_Country_Description.
    MSG-00010: 12:03 1 Transaction: 8414037
    MSG-00100: DEBUG:  Get_Country_Description.
    MSG-00100: DEBUG:  Get_Country_Description.
    MSG-05000: DEBUG:  Remit To Address....
    MSG-05000: DEBUG:  Address Style:   
    MSG-05000: DEBUG:  Address 1:        11000 IH-35 NORTH
    MSG-05000: DEBUG:  Address 2:       
    MSG-05000: DEBUG:  Address 3:       
    MSG-05000: DEBUG:  Address 4:       
    MSG-05000: DEBUG:  City:             AUSTIN
    MSG-05000: DEBUG:  County:          
    MSG-05000: DEBUG:  State:            TX
    MSG-05000: DEBUG:  Province:        
    MSG-05000: DEBUG:  Postal Code:      78753
    MSG-05000: DEBUG:  Territory:       
    MSG-05000: DEBUG:  Country_Code:     US
    MSG-05000: DEBUG:  Customer Name:   
    MSG-05000: DEBUG:  Bill To:         
    MSG-05000: DEBUG:  First Name:      
    MSG-05000: DEBUG:  Last Name:       
    MSG-05000: DEBUG:  Mail Stop:       
    MSG-05000: DEBUG:  Country Code:     US
    MSG-05000: DEBUG:  Country Desc:    
    MSG-05000: DEBUG:  Print Home Flag:  N
    MSG-05000: DEBUG:  Width:            40
    MSG-05000: DEBUG:  Height Min:       6
    MSG-05000: DEBUG:  Height Max:       6
    MSG-05000: DEBUG:  Remit To Formatted...   11000 IH-35 NORTH
    AUSTIN TX 78753
    MSG-05000: DEBUG:  Bill To Address....
    MSG-05000: DEBUG:  Address Style:   
    MSG-05000: DEBUG:  Address 1:        2481 ROSS CRES
    MSG-05000: DEBUG:  Address 2:       
    MSG-05000: DEBUG:  Address 3:       
    MSG-05000: DEBUG:  Address 4:       
    MSG-05000: DEBUG:  City:             NORTH BATTLEFORD
    MSG-05000: DEBUG:  County:          
    MSG-05000: DEBUG:  State:           
    MSG-05000: DEBUG:  Province:         SASKATCHEWAN
    MSG-05000: DEBUG:  Postal Code:      S9A3R3
    MSG-05000: DEBUG:  Territory:       
    MSG-05000: DEBUG:  Country_Code:     CA
    MSG-05000: DEBUG:  Customer Name:    VAUGHN FAUTH
    MSG-05000: DEBUG:  Bill To:         
    MSG-05000: DEBUG:  First Name:       VAUGHN
    MSG-05000: DEBUG:  Last Name:        FAUTH
    MSG-05000: DEBUG:  Mail Stop:       
    MSG-05000: DEBUG:  Country Code:     US
    MSG-05000: DEBUG:  Country Desc:    
    MSG-05000: DEBUG:  Print Home Flag:  N
    MSG-05000: DEBUG:  Width:            40
    MSG-05000: DEBUG:  Height Min:       8
    MSG-05000: DEBUG:  Height Max:       8
    MSG-05000: DEBUG:  Bill To Formatted... VAUGHN FAUTH
    VAUGHN FAUTH
    2481 ROSS CRES
    NORTH BATTLEFORD SASKATCHEWAN S9A3R3
    Canada
    MSG-05000: DEBUG:  Ship To Address....
    MSG-05000: DEBUG:  Address Style:   
    MSG-05000: DEBUG:  Address 1:        2481 ROSS CRES
    MSG-05000: DEBUG:  Address 2:       
    MSG-05000: DEBUG:  Address 3:       
    MSG-05000: DEBUG:  Address 4:       
    MSG-05000: DEBUG:  City:             NORTH BATTLEFORD
    MSG-05000: DEBUG:  County:          
    MSG-05000: DEBUG:  State:           
    MSG-05000: DEBUG:  Province:         SASKATCHEWAN
    MSG-05000: DEBUG:  Postal Code:      S9A3R3
    MSG-05000: DEBUG:  Territory:       
    MSG-05000: DEBUG:  Country_Code:     CA
    MSG-05000: DEBUG:  Customer Name:    VAUGHN FAUTH
    MSG-05000: DEBUG:  Bill To:         
    MSG-05000: DEBUG:  First Name:      
    MSG-05000: DEBUG:  Last Name:       
    MSG-05000: DEBUG:  Mail Stop:       
    MSG-05000: DEBUG:  Country Code:     US
    MSG-05000: DEBUG:  Country Desc:    
    MSG-05000: DEBUG:  Print Home Flag:  N
    MSG-05000: DEBUG:  Width:            40
    MSG-05000: DEBUG:  Height Min:       8
    MSG-05000: DEBUG:  Height Max:       8
    MSG-05000: DEBUG:  Ship To Formatted...   VAUGHN FAUTH
    2481 ROSS CRES
    NORTH BATTLEFORD SASKATCHEWAN S9A3R3
    Canada
    Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    +------------- 1) PUBLISH -------------+
    Unable to find an Output Post Processor service to post-process request 25854362.
    Check that the Output Post Processor service is running.
    +--------------------------------------+
    +------------- 2) PRINT   -------------+
    Not printing the output of this request because post-processing failed.
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Can any one please guide me for this issue.?.
    Thanks,
    Vasanth

    Hussein,
    FNDOPP log file
    9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
    [9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
    ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
    ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
    ORA-06512: at line 1
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
    at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
    at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
    at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
    at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
    at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
    at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
    at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
    at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
    at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
    [9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
    [GC 20321K->4065K(63360K), 0.0137050 secs]
    Thanks,
    Vasanth

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • I am getting the ssl error when trying to use launchpad on ssl, i can access adminui through ssl with no errors but launchpad says "unable to find valid certification path to requested target"

    Hi I desperately need help  to fix this error. I installed Adobe LCES4 with ssl enabled and i can access the adminui and workspace on the browser but he problem is when i try connecting to launchpad using https on the server even doing the simple thing like converting document to pdf throws the following error.
    any help will be appreciated
    DSC Invocation Resulted in Error: class com.adobe.idp.DocumentError : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    thanks

    We tried adding certificate in trustore.jks file, but it was not successful.
    What error you are getting while importing the certificate?
    Just perform below steps once:
    Download required certificate first
    Run CMD as administrator> move to SUP_HOME\Servers\UnwiredServer\Repository\Security
    Paste this syntex.
    keytool -importcert -alias customerCA -file <certificatefilename>.crt -storepass changeit -keystore truststore.jks -trustcacerts

  • GRC 10 Upgrade: Unable to find a system while creating a request in AC

    Hi All,
    I am unable to find a system while creating a new request in Access Management. I have created a connector to the backend system  and I tested that by logging into the system remotely. However, the same system is not available for selection for which the request needs to be created.
    Please suggest.
    Regards,
    Faisal

    Hi Faisal,
    Please re-visit the following config:
    SPRO>GRC>AC-->Maintain Connector Settings
    SPRO>GRC>AC-->Maintain Mapping for Actions and Connector Groups
    SPRO>GRC>AC-->Maintain Plugin Settings (Make sure you have not checked the checkbox)
    Still not solved - please follow this document and make sure you have completed all the steps:
    http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/5067e447-5c64-2e10-7d9c-8f7e5953aadb
    Regards,
    Ajesh.

  • Unable to find a Routing corresponding to the incoming request message.

    I have faced some issues regarding integration between peoplesoft 9 [peopletools 8.48] and Oracle Fusion Middleware using BPEL.
    the error log shows the error
    Exception : PeopleSoftServiceListeningConnector: GeneralFrameworkException
    Default Message : Unable to find a Routing corresponding to the incoming request message.
    stack trace : com.peoplesoft.pt.integrationgateway.common.GeneralFrameworkException
         at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftServiceListeningConnector.service
    Please help me out in this issue.
    I have searched forums and Some of them told that if external service operation and message name are not matching then this kind of error occurs.i have changed the alias name in routings>parameter page to my message name. But still it is not working.
    Thanks and advance,
    Nirav

    Thanks.
    I hv used the userid PS in the node definition page of the anonymous node. Because previously I was getting the error that "Username is not defined in the database."
    What you mean is
    1) Should I removed the userid PS from the node definition page of the anonymous node ?
    2) The external Alias name in the routing parameter page is the same as the component interface and version v1 is added there as a suffix. I hv changed the external Alias name to my request and response message name. Am i doing right ? If I'm doing wrong then what should be the external alias name.
    Thanks,
    Nirav

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • Unable to find the requested server on Blackberry 9900 Smartphone Simulator

    I have downloaded the Blackberry 9900 and 9930 Simulator . When I launch the browser on the simulator ,It is showing unable to find the requested server.The device is connected through Wi-Fi.

    Greetings and welcome to the Support Forums.
    I am really not clear as to your specific question.
    You want to be able to login to your work WiFi?
    You want to be able to resend Service Book to your device... for what need?
    Do you have the BlackBerry Data plan on your service provider account? If you're not sure, call them and ask.
    Who is your service provider?
    What other details can you provide?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to find published output for this request

    Hi All:
    I have created a XML report (Data Template and the RTF) in EBS and the program runs fine.
    Then I changed/modified the Data Template and updated the xml file. When I try to run the report after the change
    the report completes normal but have no output and gives me "Unable to find published output for this request"
    I can not figure out what I am missing..
    Please help
    Thanks,

    Hi Octavio:
    Thanks, This was helpful.
    It works after I end dated the RTF template and then run the program again. Now I have the XML with my changes in and then I can modify the RTF and upload it again..
    Thanks
    Edited by: user10800212 on Jan 29, 2009 9:32 AM

  • [HELP] unable to find the requested server

    Why every try connect trough WiFi shown error message "unable to find the requested server"
    BB Storm II 9520,
    Anyone can help....
    TQ 

    OK, two things:
    ON your BlackBerry, go to Options > Advanced > Browser.
    Set that to HOTSPOT and save.
    Now, connected to a WiFi router, open the internet browser on the BlackBerry try going to mobile.blackberry.com
    Does it work?
    Also, Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
    You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the mobile network internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
    So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to find Active Users Concurrent Program in Submit Requests Form

    We applied a patch 9647331 on our development instance (R12.1.1). It completed succesfully. But when we are trying to submit ACTIVE USERS concurrent request, we are unable to find it in the Submit Requests Form.
    However, we are able to submit the Active Users program using CONCSUB.
    Not sure if the patch has done anything.
    Please suggest.
    Regards,
    RA.

    We applied a patch 9647331 on our development instance (R12.1.1). It completed succesfully. But when we are trying to submit ACTIVE USERS concurrent request, we are unable to find it in the Submit Requests Form.From which responsibility?
    Have you verified if the concurrent program is added to the Request Group which is linked to this responsibility?
    Not sure if the patch has done anything. I do not think so. Was the patch applied successfully included all pre-reqs?
    Thanks,
    Hussein

Maybe you are looking for

  • Converting sample rate when exporting

    CS5.5 I'm using Audition to do some final mastering to 16-bit stereo 44100 wav files, in 32 float multi-track sessions. All I'm doing is increasing the clip gain, then exporting to 16-bit stereo 44100 wave and 320 mp3. I'm not changing the sample rat

  • Keyword list problem

    Hi all, i seem to have too many key words, I can no longer scroll right down to the end of the list. I have just load lr3 beta and its the same, has anyone else had this problem or am I missing something here. can anyone assist on this please.???

  • Customization for Change Pointer Mechanism in IDOC Programming?

    Hi, Can anyone suggest me that     We want to Maintain Master and Transactional Data in Different SAP Servers.I want to Send the Master Data to the other Server but before IDOC Creation i need to Display all Created or Changed Master Data then Our en

  • 23" display looses power when either USB or firewire cables are connected

    I was actively using my computer when one of my 2 23" cinema displays lost power. I thought it died and was unplugging everything, when I discovered that it powered back on when both the connected USB and FIREWIRE cables were disconnected from my mac

  • Laggy video on Chrome.

    Since the 11.4 update everytime i go to watch a video on any stream site i get laggy videos in full screen is there any update? I am running google chrome. And yes i have tried the turning enhanced thing off.