Unable to find selection field "object type" in IP19

Hi there,
Is there any way to add the equipment "Object Type" into standard report IP19 as i couldn't find the selection field in the report.
Thanks in advance.
Regards.

Calyn Kua,
Here's a work-around:
Go to IP19 and press Multiple Selection button on the Equipment field
In the next popup select the Multiple Selection button again
Select the search-help for Equipment by equipment list
In the next selection screen enter your data including the Technical obj type data and execute the report
Select the equipment in the list as required and select the lower green tick. This should return your equipment numbers back into the IP19 equipment field
Choose the With object list checkbox if required
Execute the IP19 report
Alternatively you can copy the IP19 report and add your own customer-specific fields/logic.
PeteA

Similar Messages

Unable to find consolidate field in Time off Process application

Hi All,
I create an aplllication for Time off process and unable to find "consolidate" field when selecting set up block parameters .I am using portals EP 7.0 Version
Could you please help me in getting this ...
Thanks ,
Nararaju.

Hi,
we group parameters so that the output of process actions is automatically entered as input .We can consolidate parameter at Action,block adn process levels
follow the below steps
1. Select your Seq Block and click on the tab "Parameters" at the bottom pane
2. Mark all the parameter (press ctrl for multiple ) and Click on Map
3. Supply the Name and say create
at last do a SavaAll
hope this will solve ur problem
cheers
souza

Unable to find abstract layer object definition

Hi,
I am using SoapUI 3.6.1.
When I send a request "getAttribute" along with all the optional parameters, specifying the Username and password in the Request Properties window, I am getting following error.
<ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service" xmlns:ns1="http://www.novell.com/vdx/service">
<reason>Unable to find abstract layer object definition for the specified definition key.</reason>
</ns1:VdxServiceException>
<stackTrace xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServiceException
at com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxServiceException(VdxServerHelp er.java:90)
In case of "getAttributes" request, an error is thrown.
<html><head><title>JBoss Web/2.1.3.GA - Error report</title><style></style> </head><body><h1>HTTP Status 401 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>This request requires HTTP authentication ().</u></p><HR size="1" noshade="noshade"><h3>JBoss Web/2.1.3.GA</h3></body></html>
Please suggest steps how can one get attributes of a user using SoapUI.

Sorry, I can't help you.
It's been too long since I have used SoapUI.
What is "getAttribute"?
It is not a SOAP request.
I also do know what "www.novell.com/vdx/service" is.
Preston
>>> On Friday, October 11, 2013 at 12:16 AM,
Nikender<[email protected]> wrote:
> Hi,
>
> I am using SoapUI 3.6.1.
>
> ‑ When I send a request "getAttribute" along with all the optional
> parameters, specifying the Username and password in the Request
> Properties window, I am getting following error.
>
> * <ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service"
> xmlns:ns1="http://www.novell.com/vdx/service">
> <reason>Unable to find abstract layer object definition
> for the specified definition key.</reason>
> </ns1:VdxServiceException>
> <stackTrace
> xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServic
> eException
> at
> com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxSe
> rviceException(VdxServerHelper.java:90)*
>
> 2
> ‑ In case of "getAttributes" request, an error is thrown.
>
> <HTML><HEAD><TITLE>JBOSS WEB/2.1.3.GA ‑ ERROR
> REPORT</TITLE><STYLE><!‑‑H1
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:22PX;}
> H2
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:16PX;}
> H3
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:14PX;}
> BODY
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:BLA CK;BACKGROUND‑COLOR:WHIT
E;}
> B
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;}
> P
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;BACKGROUN D:WHITE;COLOR:BLACK;FONT
SIZE
> :12PX;}A
> {COLOR : BLACK;}A.NAME {COLOR : BLACK;}HR {COLOR :
#525D76;}‑‑></STYLE>
> </HEAD><BODY><H1>HTTP STATUS 401 ‑ </H1><HR SIZE=\"1\"
> NOSHADE=\"NOSHADE\"><P><B>TYPE</B> STATUS REPORT</P><P><B>MESSAGE</B>
> <U></U></P><P><B>DESCRIPTION</B> <U>THIS REQUEST REQUIRES HTTP
> AUTHENTICATION ().</U></P><HR SIZE=\"1\" NOSHADE=\"NOSHADE\"><H3>JBOSS
> WEB/2.1.3.GA</H3></BODY></HTML>
>
> Please suggest steps how can one get attributes of a user using SoapUI.

"System: Unable to find the specified object" on N...

When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.

Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

Unable to find requested Data Object

Hi,
I import a standar data object in my DOE... It is a simple getlist and getdetail.
I import all correctly, but when i activate it appear this error:
"Unable to find requested Data Object"
What happend?
Thanks in advance,
Regards,

I delete de data object and the bappi, i create the bappi with the wizard, and now work fine the data object...
Regards,

Unable to find 0equipment field in 0pm_measurement, pls help

Hi all,
unable to find 0equipment field in 0pm_measurement (Measurement Results), the problem actually here is, may be i can add the field thru LO' extraction the field 0equipment to 0pm_measurement but it is not LO's extraction we can go for, its probably thru LIS or FI procedure i suppose. but if u have a different input, pls let me know. and if we have to add the field 0equipment to 0pm_measurement how should we go about. Thanks in advance.

Hi,
Could u tell me which procedure u have used for this as LO extraction is not possible through this & how u have added equipment for this,as even I have the same requirement
Thanks
Maya

System: unable to find the specified object.

I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advance

Hi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question..

Unable to find the ODS object while creating Multiprovider, Help

Hello Experts,
Iam facing problems while creating the MULTIPROVIDER.
I am unable to find the ODS in the list during initial selection of creation of Multiprovider. There are some ODS's which appear, while others don't.
Is there any selection on ODS that is preventing it from appearing in the list of ODS's.
Please help....Very Urgent

In ODS-change screen tick checkbox for 'BEx reporting' that appears under 'settings'.
then save and activate ODS..
after this the ODS will appear in the list while creating multiprovider.
cheers,
Vishvesh
Message was edited by: Vishvesh

Document to find out the Object types

Hi All,
Can any one pls provide me the document where you have the list of all Object types defined in Oracle Applications.
Thanks in Advance

Hi,
What object types you are referring to? Could you please elaborate more.
Oracle Applications Developer Guide (and other main documents) can be found at:
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html
Regards,
Hussein

Finding a Field object in a series of reports

I'm managing a series of 70+ Crystal reports sitting on disk in RPT files. I need to determine the effect of a series of proposed database changes in these reports. I'm trying to iterate therough the reports by loading each one into a ReportDocument object and then checking the properties to see if a particular database field is used. I can see thes formulas, summaries, groups, etc but I can't seem to find if a detail section uses a particular FieldObject bound to a giben column in table. The name of the object appears but that is usually a default like 'Field1'. I need to see if, say, Employees.LastName is used.
How can I accomplish this using the SDK?
Thanks
Carl

Hello,
Try accessing the report objects and then check the properties: (the code is for checking a subreport)
foreach (CrystalDecisions.CrystalReports.Engine.ReportObject obj in cr.ReportDefinition.ReportObjects)
            if (obj.Kind == CrystalDecisions.Shared.ReportObjectKind.SubreportObject)
                // statements
                    return false;
Thanks,
Bhushan.

Unable not find the monitoring object(idoc monitoring ) in BPmon

Hello Guys,
     As part configuration of IDOC monitoring in BPmon configuration ,while i am creating monitoring object for IDOC monitoring (solman_workcenter->Business process operations ->setup Business process monitoring -->selected the solution --> business scenarios -->
As mentioned above i could not able to find the IDOC monitoring template in the droup down list
Components level on manage system:-
ST-PI       2008_1_710 SP 08
ST-A/PI   01Q_731 SP2
I have done the load monitoring definition by selecting respective local component and clicked on load monitoring definitions
Please help me on resolving the issue.
Regards,
Pavan

Hello Calvin van der Walt,
Please upgrade ST-PI & ST-A/PI component to latest level.I resolved my issue by doing ST-PI & ST-A/PI component upgarde.
I had raised an OSS message eith SAP on this isssue and SAP has asked us for ST-PI & ST-A/PI component upgarde.
So please go with ST-PI & ST-A/PI component upgarde it will resolve your issue.
Regards,
Pavan

Select into OBJECT TYPE

Gotta run this some folks as it is driving me nuts. Using the nested table types so I have a simple type declared as this....
CREATE OR REPLACE
TYPE MAGIC_ARRAY AS TABLE OF FLOAT;
I want to use a function which gets the values in the table by column attempts to select into the collection......
FUNCTION getMagicNumbers()
RETURN magic_array
IS
v_magic_array magic_array := magic_array();
BEGIN
v_magic_array.extend(10);
select cbe.Field1,
cbe.Field2,
cbe.Field3,
cbe.Field4,
cbe.Field5,
cbe.Field6,
cbe.Field7,
cbe.Field8,
cbe.Field9,
cbe.Field10
INTO v_magic_array
from cbe_magic_number cbe
WHERE ROWNUM=1;
--Return the value
return (v_magic_array);
end getMagicNumbers;
Looks like it should work but I get ORA-00947: not enough values. If I replace the "INTO v_magic_array" with individual indexed values....
INTO v_magic_array(1),
v_magic_array(2),
v_magic_array(3),
v_magic_array(4),
v_magic_array(5),
v_magic_array(6),
v_magic_array(7),
v_magic_array(8),
v_magic_array(9),
v_magic_array(10),
It compiles and works fine. Do I need to use the indexes for the assignment of values all the time?

you need to specifically list the elements by subscript.It seems simpler to just instantiate a new collection in-line in your SQL.
SQL> SET SERVEROUTPUT ON;
SQL> DECLARE
2     FUNCTION getmagicnumbers
3        RETURN magic_array
4     IS
5        v_magic_array magic_array;
6     BEGIN
7        SELECT magic_array (
8                  cbe.field1, cbe.field2,
9                  cbe.field3, cbe.field4,
10                  cbe.field5, cbe.field6,
11                  cbe.field7, cbe.field8,
12                  cbe.field9, cbe.field10)
13        INTO   v_magic_array
14        FROM   cbe_magic_number cbe
15        WHERE ROWNUM = 1;
16
17        RETURN v_magic_array;
18     END;
19 BEGIN
20     DBMS_OUTPUT.PUT_LINE (
21        'getmagicnumbers ().COUNT => ' ||
22           getmagicnumbers ().COUNT);
23 END;
24 /
getmagicnumbers ().COUNT => 10
PL/SQL procedure successfully completed.
SQL>

System: Unable to find the specified object on 950...

Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon

21-Apr-2006
04:02 PM
simonpindar wrote:
Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon
Hello
I have the same problem with my handset ,but I could not found the way that I can solve this problem ,I just wanna to know ,could you solve your problem ?is it possible you explain for me what did you do exactly?
thanks

Object type for incoming payments object

Dear All,
I need to write the transaction notification for incoming payment documents, but I am unable to find out the object type for incoming payments object.
I have checked the object type 24 (receipts), but it is not for incoming payments. Any idea??
Thanks in advance..
Suresh Yerra.

Hello,
Generally try this in the transaction notification (this logs every call of transaction notification)
if not exists (select * from sysobjects where name = 'T_TransactionNotification')
begin
     create table T_TransactionNotification(
     TransactionDate datetime,
     ObjectType nvarchar(20),
     TransactionType nchar(1),
     NumOfColsInKey int,
     ListOfKeyColsTabDel nvarchar(255),
     ListOfColsValTabDel nvarchar(255) );
end;
insert into T_TransactionNotification
(     TransactionDate,
     ObjectType,
     TransactionType,
     NumOfColsInKey,
     ListOfKeyColsTabDel,
     ListOfColsValTabDel)
values( getdate(),
          @object_type,
          @transaction_type,
          @num_of_cols_in_key,
          @list_of_key_cols_tab_del,
          @list_of_cols_val_tab_del);
then issue a incoming payment (i have payed a invoice with bank transfer)
you will see the following
2010-01-20 14:45:20.907     24     A     1     DocEntry     2010390001
2010-01-20 14:45:20.903     321     A     1     ReconNum     1838
2 records will be inserted
- 1st for payment with object type 24
- 2nd for reconsiliation of invoice and payment i have payed in this example.
Regards,
J.
Edited by: János Nagy on Jan 20, 2010 2:45 PM

Select only one type of field using JavaScript in Acrobat X

Looking for a way to select all fields of the same type on a form at once?
Such as selecting all text fields to modify the font type, or all buttons to modify display values. Prior versions 6,7, & 8 were able to do this. Would prefer a script for each control type however I do not see any information in the JavaScript Reference Guide about this.

The is no UI for selecting field by type in the newer versions of Acrobat.
Have you looked at the numFields property and example?
With some modification:
function FindFieldType(cType)
var aFieldNames = new Array(); // array of fields of type sFieldType
// walk the array of field names;
for ( var i = 0; i < this.numFields; i++) {
var fname = this.getNthFieldName(i);
if ( fname.type = cType ) {
// match to field type - add to array of names;
aFieldNames[aFieldNames.length] = fname;
} // end walk array of field names
return aFieldNames;
} // end FindFieldType function
var aMyFields = new Array();
// find button field type
aMyFields = FindFieldType("button");
// now do something with the array of field names;
app.alert("button fields: \n" + aMyFields.join("\n");

Unable to find selection field "object type" in IP19

Similar Messages

Maybe you are looking for