Unable to find spreadsheet otion in ActiveX Control

I am using labview 8.6, In this i am unable to find Spreadsheet control in ActiveX Control......
So please tell me how i can resolve my this issue..

Hi,
i could find the spread sheet control in LV 8.6 also.
Post back for queries.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.

Similar Messages

Error 46: Can't find or load QuickTime ActiveX control

Have tried many times to download and use QuickTime on my HP Pavillion laptop running Windows 7. Disabled antivirus, firewall, SpySweeper, etc. but to no avail. Uninstalled, reinstalled, etc. Keep getting the same error when attempting to run program. Anyone know what a fix might be? iTunes has also been uninstalled and reinstalled but no help. iTunes seems to work O.K. but many video clips won't work without QuickTime. I would sure appreciate any guidance.
Bryan

bgcarl, it's a very interesting post and sorry I couldn't be of more help, but thought I might add this.
http://www.microsoft.com/security/resources/activex-whatis.aspx
Where ActiveX is a add-on. Is this error happening while using the browser with QuickTime? For example in IE 8 browser if you go to Tools>Internet Options>Security>Custom level. There are a number of preferences for ActiveX. For some reason the computer cannot find or load the ActiveX control, but what is hindering it??? It's probably something simple we can't find...

I need a little help help with the Spreadsheet 9 ActiveX control

Here's the situation: I want to import data from an Excel file to the MS Office Spreadsheet 9.0 ActiveX control on the LV front page. I can retrieve the data just fine but I can't get it to display in the control on the front page. I can select a range and when I try to write to the Value property I find that I cannot. The problem seems to be the Value property itself cannot handle 2-D data arrays. I can select a 2D range and write a single value which gets written to every cell in the range but when I read the data I get only the first cell in the range and an error if I try to caste the Variant output to a 2D array.
I've noticed a Value2 property for the range when actually working with Excel but I haven't been able to determine where or if it exists for the Spreadsheet 9 control. I've attached a little test program to better show what I'm experiencing/talking about. Anyone have any suggestions on this? It seems like it would be possible or else why have the control there but I haven't found a way around it. Thanks in advance.
Gary D
Attachments:
spreadsheet 9 test.vi ‏41 KB

Jack J. wrote:
Hey Gary,
What version of MS Office does the 9.0 ActiveX control come with. I have version 11.0 here. I could get your program working on my computer but I had to reinitialize the activex control to the 11.0 control. I also had to reselect the properties. All the properties are essentially the same except Value. In this ActiveX version, I see the Value2 property (the Value property does not exist). And your method of reading and writing to the Value2 property handles 2D arrays.
If you can tell me what version of Office you are using, I will try to find a computer with that version and try your program.
Jack J.
Applications Engineer
National Instruments
Most of the computers have Office 2000 which uses the Value property and the Spreadsheet 9.0 control. I too have been able to duplicate it ona computer with Office 2000 (Spreadsheet 11.0). I think it may just be a functionality of the Excel version though for some reason if I use Excel and go through the song and dance with the methods and properties, I get to the Value2 property.
After writing that it seems weird that using Excel properties and methods gets me to the point where I can select the Value2 method and read/write accordigly, but with the Spreadsheet 9.0 control (which, I assume is simply embedding Excel in the app) I get to a different set of properties. Perhps Spreadsheet 10 (or 11) is on the computer but not showing up? That's the only sensible conclusion I can come to, though it seems weird for it to not show up on multiple computers which effectively kills that idea anyway.
Anyway. thanks for any help you can provide.

Quicktime 7.0+ with Vista = error 46: can't find or load quicktime activex

For awhile, Quicktime Pro was working on my 32bit Microsoft Vista PC that I built, then sometime around 7.1.5 Internet Explorer would no longer play Quicktime files in my browser. No biggie, but then after 7.1.6 it would not longer load at all. I keep getting Error 46: Can't find or load Quicktime ActiveX control.
If I try launching Quicktime as the administrator, I still get the Error 46. And it just won't load. Even Sony Vegas Video won't render Quicktime files as that gives me an access violation.
I managed to find a Quicktime 7.0.1 installer, so I deinstalled 7.1.6 and installed 7.0.1 and all was well again. The program would launch and play Quicktime files and Sony Vegas Video would render Quicktime files again.
But as soon as I rebooted...Error 46 again...even after downgrading. Something's going on with the permissions and I cant seem to fix it.
The one shining light with 7.0.1 is if I launch it as an Administrator it will work after rebooting. But only if launching it as an Administrator.
7.1.6 will not do this. It will error everytime regardless of launching as an admin or not.
Anyone have any ideas how to solve this? And does anyone know if Apple is working to solve this issue? Hopefully this isn't too limited of a bug, otherwise I might be in for a long wait for a fix.

Hi, all
I thought I would post the link to another thread where I got this working on my machine.
http://discussions.apple.com/thread.jspa?threadID=948432&tstart=15
Hope this helps.
Thanks,
David Eaton

ActiveX Control+OLE Container+ Bean Area. Help Required

I am a beginner and using forms 6i, where can i find detailed information about ActiveX Control,OLE Container and Bean Area.

Hello,
Forms 6i is a very old version and is unsupported for a long time. Are you forced to use this version ? If you are a beginner, why don't you start with the current version ?
Francois

Where can I find manual Crystal 11.0 viewer activex control for download?

Hello,
Where can I find manual Crystal 11.0 viewer activex control for download?
I'm having a heck of a time installing the control on a client machine.
Thanks,
-Drew
Moved to Crystal Forums Edited by: Marilyn Pratt on Apr 20, 2010 1:58 AM

The ActiveXViewer is not downloadable from our SAP site. The file is hosted on your web server, and also installed on the system where you have Crystal Reports XI installed.
Look here, C:Program FilesBusiness ObjectsCommon3.0crystalreportviewers11ActiveXControls for ActiveXViewer.cab. Extract the contents and right click crviewer.inf, then select Install.
Also see knowledge base article 1218519 here, http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-notes.

Using activex control in forms 6i(OWC11.Spreadsheet.11 control)

Hi all,
I want to use activex control OWC11.Spreadsheet.11 in forms6i
does any one used this component in form6i ?
any help/suggestions would appreciated

when u load activex (spreedsheet) the corresponting menu also u can see when u run through which also you can set the attribute values
im also check the same it is working
sorry i saw it on design time
kansih
Edited by: Kanish on Apr 28, 2009 2:54 AM

Slim[458]: amixer: Unable to find simple control 'PCM',0

Lately I've noticed I've been getting the following my log files. I do have sound but that isn't the issue but the error message comes up constantly in my logs. Does anyone know why this would happen?
Jul 14 21:48:31 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:31 ziltoid-pc slim[458]: ** Message: applet now removed from the notification area
Jul 14 21:48:32 ziltoid-pc slim[458]: ** Message: applet now embedded in the notification area
Jul 14 21:48:32 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:33 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:33 ziltoid-pc systemd[1]: Time has been changed
Jul 14 21:48:34 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:35 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:36 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:37 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:38 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:39 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:40 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:41 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:42 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:43 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:44 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:44 ziltoid-pc NetworkManager[440]: <info> (enp9s0): IP6 addrconf timed out or failed.
Jul 14 21:48:44 ziltoid-pc NetworkManager[440]: <info> Activation (enp9s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jul 14 21:48:44 ziltoid-pc NetworkManager[440]: <info> Activation (enp9s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jul 14 21:48:44 ziltoid-pc NetworkManager[440]: <info> Activation (enp9s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 14 21:48:45 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:46 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:47 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:48 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:49 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:50 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:51 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:52 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:53 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:54 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:55 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:56 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:57 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:58 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:48:59 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:00 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:01 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:02 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:03 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:04 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:05 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:06 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:07 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:08 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:09 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:10 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:11 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:12 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:13 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:14 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:15 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:16 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:17 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:18 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:19 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:20 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:21 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:22 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0
Jul 14 21:49:23 ziltoid-pc slim[458]: amixer: Unable to find simple control 'PCM',0

Nevermind... Just reinstalling again alsa-utils and it works!

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Unable to find bootcamp in control panel after upgrade to Mac OS X 10.6.8, please help.

Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.

you problem is in OS X (guessing here)
Guess #2: you use an NTFS driver in Mac OS X
Try OS X forum? No?
When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
Do you 'see' Windows volume on the Desktop as being physically there?
Opened Disk Utility and look at the drives and volumes: Windows volumne is still present.

Unable to find, B1iP Control Center, as well as what is IPO user

Hello Experts,
We are unable to find, B1iP Control Center, as well as what is IPO user in SAP Business One 8.8 PL15.
Please guide us as soon as possible,
Also I am told to Check:
ifdestHost and destPort are missing in the SLD
What does this exactly means ?
I have recently installed the integration component of SAP 8.8
to enable dashboards.
It was not working, SAP have replied to message about B1iP Control Center, IPO user and SLD
Regards,
Papil

Papil,
You need to log into the integration component to be able to see the SLD and the B1iC Control Center. This should be under Start > All Programs > Integration Solution.
Eddy

How to find references to ActiveX control

Is there a way to determine where an activex control is used within a labview project? I have a moderately large project that previously used an adhoc combination of XML parsers, including the ActiveX XML parser from Microsoft (MSXML). I am trying to replace all instances of MSXML with either the builtin labview XML VI's or calls to our own DLL that make more complicated sequences of calls to the Xerces/Xalan XML libraries. I want to make sure I replaced all references to the MSXML parser without having to inspect all the VI's in the project. I was hoping that I could right click on an "Open Automation" function block and select the "Find All Instances" option, but apparently this is not availible as it is for a VI I created. Also, I was hoping that if I went to the Project Explorer, it would show that the msxml.dll file was listed as a dependency where I could do a "Find Callers" like an ordinary dll referenced through a "Call Library Function Node". Does anyone have a suggestion on how I can automate this search?
Thanks.
Solved!
Go to Solution.

The "Find all Instances" is only available for VIs that you create, but you can still search for the Automation Open function in your project. Just open your project and open up a VI. Then select Edit -> Find and Replace. In this dialog you can search for specific functions across the entire project.

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

Excel VBA - ActiveX Control - MonthView not available under ActiveX Toolbox for Windows 8 64bit MS Office 2010

Hello,
I have Windows 8, 64bit and Office 2010
I am trying to get the 'datepicker' (MonthView) ActiveX control toolbox in Excel 2010 as part of a Excel UserForm I have created. I have spent all day trying to find a solution for my problem.
I opened up the 'more.. ' but the MonthView/datepicker/calendar control is not listed.
I referred to some articles and confirmed that I do indeed have the mscomct2.ocx file in the C:\Windows\syswow64 folder.
I followed the instructions as above, opening up the Administrator Command Prompt and changed the directory to C:\Windows\syswow64 and typed in RegSvr32.
I received a popup screen confirming my registration was successful
Excel was closed. So I opened Excel and checked out the ActiveX Tool box and clicked on the 'More Controls', but there was no listing for the Microsoft MonthView control, (nor datepicker/calendar)
I then downloaded the latest Windows Common Controls 2 6.0 from the following site
http://support.microsoft.com/kb/297381
Copied the original file (2008) and saved it elsewhere on the computer for safekeeping.
Extracted the new mscomct2.ocx.
Under the C:\Windows\syswow64 I changed the original file properties to allow me to overwrite it with the new file. This worked … old file replaced.
I then registered the new file via the Administrator Command Prompt (as above) and was notified that it was successful. I rebooted pc and went back into Excel to find the MonthView in the
ActiveX toolbox, More Controls… and it still wasn’t there …
I would be very grateful if someone could advise how I can get this control and allow me to use it.
If I have left out any information that you need to resolve this issue, please advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Hi George,
Thank you for checking this out ... :)
I am using Office 2010 64 bit ...
I found the
mscomct2.ocx file originally within the C:\Windows\syswow64 directory (this was an original file .... which I expect was installed via Microsoft at the time of the Office installation.
As I mentioned above, I followed
the instructions (same as the ones you suggested), but still no go, even though it stated that the registration was successful ! :(
Why weren't these features included in the 64 bit ? ... yes, I read the article ... but ... so MS doesn't think that people/developers would be needing this in due course? I installed the 64bit version because I'm running the Win8 64bit version ...and
I deal with a lot of large spreadsheets and can't afford to sleep whilst they decide to load.
If MS included all the other ActiveX controls and some obscure ones, surely some bright spark could have thought that something as useful as MonthView should be included as 'basic' necessity when dealing with forms and sheets?
Perhaps you could pass the suggestion up the line .... there are a lot of other people out there having the same problem ... I found heaps when I was looking for a solution.
Sorry, I'm not having a go at you, but just incredibly frustrated .... the amount of lost productivity directly cause by trying to find a solution that doesn't exist ... it's been at least a good solid 24 hours.
But thank you for taking the time to review my post and your suggestion. It's unfortunate that because you are part of the organisation ... you tend to cop some slack from frustrated people like myself.
In relation to the pictures/screen dumps, 2 of them made it (I can see them in my post) ... one I deliberately left out because there was nothing on there that showed anything other than the rest of the 'More Controls' - nothing to do with the MonthView.
Please feel free to escalate this to the powers that be ... and hopefully enough people will join the voice so a change can be made (I can dream ... can't I?)
I've taken a screen dump of the Forms/ActiveX toolbox.
I don't know what the next step is ... I guess you'd be able to advise.
Cheers,
TheShyButterfly
Hope you have a terrific day, theShyButterfly

Roxio MyDVD Basic v9 installer when I run any ActiveX Control in Excel.

I built a pop up calendar to insert dates. It works perfectly except that the first time I try to run it after opening the spreadsheet, it launches an installer for Roxio MyDVD Basic v9. I always cancel it and the macro still works as intended.
Now, this wouldn't be a big problem if I was the only person using the spreadsheet file. Since I'm distributing this as a template to coworkers, I don't want them to freak out when this happens, so I'd rather just stop it from trying to launch Roxio MyDVD.
I've figured out that it has to do with the Microsoft MonthView Control I used in creating the macro being an ActiveX control. I know this because I can open up a new excel workbook, go to VBA and create a new UserForm. As soon as I place an ActiveX control into the blank UserForm1, the installer for Roxio MyDVD launches. I let it run its course, but it cannot complete the install because the "resources needed are unavailable" on our network. I'd rather not have it run at all. Understandably, our network security is pretty high, and I assume my security settings don't allow it. Since the function I use still works without this installed, I don't get why it keeps reaching out to get it. Nor do I know how to stop it.

Fixed it.
Attached is the complete export given by Microsoft System Information. It provides a lot of information and if you need more then let me know.
Luckily, it seems that MsiInstaller has been reporting errors to Windows while it flickers. You'll find these in the system report and they helped me track down the problems. The errors stemed from this:
Detection of product '{518930BE-7875-4547-B026-20B92F695781}', feature 'DataSocket.LVW71RTE' failed during request for component '{FC3E0B6E-F62B-11D1-B144-00C04F990B2B}'
For some reason, it was trying to install these things and it began to fail after the software was uninstalled because the keys it was looking for no longer existed.
I also found a lot of what looks like data c
orruption related to NIDAQ stuff in my registry. For instance, many of my Microsoft common controls (like TabStrip) contained a value named InprocServer32 within their InprocServer32 key that had not previously existed. As random as it looks, the value always contained the following string:
G!P5BM[^==)9LRdDWOXQDataSocket.LVW71RTE>j^8!E}1.(?KY(JMzo[{A@-HK,BS+T93)NrWc5@!pDataSocket.LVW16>j^8!E}1.(?KY(JMzo[{A
Note that the same string "DataSocket.LVW71RTE" as in the error is contained in there.
Also, deep in the registry there was this key:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\EB039815578774540B62029BF2967518\Features
...that appeared to contain all sorts of gibberish. I have attached an export of that key as well. For example, the value ActiveX.LVW71RTE was set to:
J$YfbexG-?m!AbH6US{*Msu*X]isJ9X{tiy(&XkvRun_Time_Engine.LVW71RTE
I can't tell you what was the exact cause of MSVC6 always trying to install these thing
s and, for all I know, that "gibberish" is actually meaningful, encoded data but deleting those whacked out keys has eliminated the issue.
Attachments:
sysinfo.zip ‏41 KB
wtf.zip ‏4 KB

Unable to find spreadsheet otion in ActiveX Control

Similar Messages

Maybe you are looking for