Unable to find the Add-on SAP_BS_FND Keep with Vendor Key

I am upgrading from EHPI Support Pack Stack 3 to Stack4, I am now stuck at the Configuration stage of the roadmap phase IS_SELECT - Keep the present version of the add-on (Keep (with vendor
key)). I wanted to keep the add-on SAP_BS_FOUNDATION with Stack 3 asthere is no Stack 4.
How to find the Key information or the note. Also please find the attached Screenshot of the same.
Regards,
Karthik Ravoori

Hi Mukesh Kakani,
In case you have installed an SEM, E-Recruiting or SAP Learning Management system, which technically means that an SAP ERP software component (ERECRUIT, SEM-BW, FINBASIS or LSOFE) is installed in your SAP NetWeaver system, you must not use a stack configuration file created for an SAP ERP system. Instead, you have to use a stack configuration file for SAP NetWeaver (either downloaded from SAP Service Marketplace or created by SAP Solution Manager Maintenance
Optimizer)."
So you qualify in this pre-condition: you have SEM-BW and FINBASIS installed on your NetWeaver system
"Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP system in SMSY in order to download the EHP packages and to be able to maintain the system. Afterwards you must not use the generated Stack XML, but instead use a generated Stack XML from SAP Service Marketplace and include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0."
In order to for you to proceed, you are able to apply SP4 using SPAM and JSPM. But when upgrading the next system in your landscape, please alternate XML file as proposed above. This will prevent the installation of the ECC component SAP_BS_FND and avoid the reoccurance of this issue.
Regards
Karthik Ravoori

Similar Messages

Photoshop CS5 is unable to find the JavaScript plug-in.

I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in." It does this with an action that was designed for me to put the filename, copyright symbol, and studio name on 4x5 proofs. It also comes up when I try to use the keyboard shortcut Ctrl/Shift/W to close a file and go to bridge. There have been some other batch operations that will not load.
I have downloaded Java; trashed the Preferences in Photoshop and Bridge; and also uninstalled and re-installed CS5 and none of this has worked. Any ideas of what to do next?
Bob Brant

Adobe Photoshop uses its own Javascript plugin not an external third party javescript. Its a required Plugin ScriptingSupport:
 ScriptingSupport 15.1
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 32908 MB
Memory available to Photoshop: 37134 MB
Memory used by Photoshop: 94 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro 4000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.4052"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro 4000/PCIe/SSE2"
glgpu[0].GLRendererID=1757
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20140702000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro 4000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="340.52"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="6.5.12"
clgpu[0].CLBandwidth=7.49299e+010
clgpu[0].CLCompute=184.366
License Type: Subscription
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 175.6G free
C:\, 224.2G, 105.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
 A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
 ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
 adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
 AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
 AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
 AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
 AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
 AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
 AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
 AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
 AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
 adobe_caps.dll Adobe CAPS 8,0,0,13
 AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
 ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
 amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
 ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
 AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
 AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
 Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
 BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
 boost_date_time.dll photoshopdva 8.0.0
 boost_signals.dll photoshopdva 8.0.0
 boost_system.dll photoshopdva 8.0.0
 boost_threads.dll photoshopdva 8.0.0
 cg.dll NVIDIA Cg Runtime 3.0.00007
 cgGL.dll NVIDIA Cg Runtime 3.0.00007
 CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
 CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
 CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
 dvaaudiodevice.dll photoshopdva 8.0.0
 dvacore.dll photoshopdva 8.0.0
 dvamarshal.dll photoshopdva 8.0.0
 dvamediatypes.dll photoshopdva 8.0.0
 dvametadata.dll photoshopdva 8.0.0
 dvametadataapi.dll photoshopdva 8.0.0
 dvametadataui.dll photoshopdva 8.0.0
 dvaplayer.dll photoshopdva 8.0.0
 dvatransport.dll photoshopdva 8.0.0
 dvaui.dll photoshopdva 8.0.0
 dvaunittesting.dll photoshopdva 8.0.0
 dynamiclink.dll photoshopdva 8.0.0
 ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
 icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
 icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
 igestep30.dll IGES Reader 9.3.0.113
 imslib.dll IMSLib DLL 7.0.0.145
 JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
 libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
 libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
 libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
 LogSession.dll LogSession 7.2.1.3399
 mediacoreif.dll photoshopdva 8.0.0
 MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
 pdfsettings.dll Adobe PDFSettings 1.04
 Photoshop.dll Adobe Photoshop CC 2014 15.1
 Plugin.dll Adobe Photoshop CC 2014 15.1
 PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
 PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
 PSArt.dll Adobe Photoshop CC 2014 15.1
 PSViews.dll Adobe Photoshop CC 2014 15.1
 SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
 ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
 svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
 tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
 tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
 TfFontMgr.dll FontMgr 9.3.0.113
 TfKernel.dll Kernel 9.3.0.113
 TFKGEOM.dll Kernel Geom 9.3.0.113
 TFUGEOM.dll Adobe, UGeom© 9.3.0.113
 updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
 VulcanControl.dll Vulcan Application Control Library 5.0.0.82
 VulcanMessage5.dll Vulcan Message Library 5.0.0.82
 WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
 wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
 3D Studio 15.1 (2014.1.0 x001)
 Accented Edges 15.1
 Adaptive Wide Angle 15.1
 Angled Strokes 15.1
 Average 15.1 (2014.1.0 x001)
 Bas Relief 15.1
 BMP 15.1
 Camera Raw 8.6
 Camera Raw Filter 8.6
 Chalk & Charcoal 15.1
 Charcoal 15.1
 Chrome 15.1
 Cineon 15.1 (2014.1.0 x001)
 Clouds 15.1 (2014.1.0 x001)
 Collada 15.1 (2014.1.0 x001)
 Color Halftone 15.1
 Colored Pencil 15.1
 CompuServe GIF 15.1
 Conté Crayon 15.1
 Craquelure 15.1
 Crop and Straighten Photos 15.1 (2014.1.0 x001)
 Crop and Straighten Photos Filter 15.1
 Crosshatch 15.1
 Crystallize 15.1
 Cutout 15.1
 Dark Strokes 15.1
 De-Interlace 15.1
 Dicom 15.1
 Difference Clouds 15.1 (2014.1.0 x001)
 Diffuse Glow 15.1
 Displace 15.1
 Dry Brush 15.1
 Eazel Acquire 15.1 (2014.1.0 x001)
 Embed Watermark 4.0
 Entropy 15.1 (2014.1.0 x001)
 Export Color Lookup NO VERSION
 Extrude 15.1
 FastCore Routines 15.1 (2014.1.0 x001)
 Fibers 15.1
 Film Grain 15.1
 Filter Gallery 15.1
 Flash 3D 15.1 (2014.1.0 x001)
 Fresco 15.1
 Glass 15.1
 Glowing Edges 15.1
 Google Earth 4 15.1 (2014.1.0 x001)
 Grain 15.1
 Graphic Pen 15.1
 Halftone Pattern 15.1
 HDRMergeUI 15.1
 IFF Format 15.1
 IGES 15.1 (2014.1.0 x001)
 Ink Outlines 15.1
 JPEG 2000 15.1
 Kurtosis 15.1 (2014.1.0 x001)
 Lens Blur 15.1
 Lens Correction 15.1
 Lens Flare 15.1
 Liquify 15.1
 Matlab Operation 15.1 (2014.1.0 x001)
 Maximum 15.1 (2014.1.0 x001)
 Mean 15.1 (2014.1.0 x001)
 Measurement Core 15.1 (2014.1.0 x001)
 Median 15.1 (2014.1.0 x001)
 Mezzotint 15.1
 Minimum 15.1 (2014.1.0 x001)
 MMXCore Routines 15.1 (2014.1.0 x001)
 Mosaic Tiles 15.1
 Multiprocessor Support 15.1 (2014.1.0 x001)
 Neon Glow 15.1
 Note Paper 15.1
 NTSC Colors 15.1 (2014.1.0 x001)
 Ocean Ripple 15.1
 OpenEXR 15.1
 Paint Daubs 15.1
 Palette Knife 15.1
 Patchwork 15.1
 Paths to Illustrator 15.1
 PCX 15.1 (2014.1.0 x001)
 Photocopy 15.1
 Photoshop 3D Engine 15.1 (2014.1.0 x001)
 Photoshop Touch 14.0
 Picture Package Filter 15.1 (2014.1.0 x001)
 Pinch 15.1
 Pixar 15.1 (2014.1.0 x001)
 Plaster 15.1
 Plastic Wrap 15.1
 PLY 15.1 (2014.1.0 x001)
 PNG 15.1
 Pointillize 15.1
 Polar Coordinates 15.1
 Portable Bit Map 15.1 (2014.1.0 x001)
 Poster Edges 15.1
 Radial Blur 15.1
 Radiance 15.1 (2014.1.0 x001)
 Range 15.1 (2014.1.0 x001)
 Read Watermark 4.0
 Render Color Lookup Grid NO VERSION
 Reticulation 15.1
 Ripple 15.1
 Rough Pastels 15.1
 Save for Web 15.1
 ScriptingSupport 15.1 <---------------------------------------------------------------------------------------- -----------------------------------------------------------------------------
 Shake Reduction 15.1
 Shear 15.1
 Skewness 15.1 (2014.1.0 x001)
 Smart Blur 15.1
 Smudge Stick 15.1
 Solarize 15.1 (2014.1.0 x001)
 Spatter 15.1
 Spherize 15.1
 Sponge 15.1
 Sprayed Strokes 15.1
 Stained Glass 15.1
 Stamp 15.1
 Standard Deviation 15.1 (2014.1.0 x001)
 STL 15.1 (2014.1.0 x001)
 Sumi-e 15.1
 Summation 15.1 (2014.1.0 x001)
 Targa 15.1
 Texturizer 15.1
 Tiles 15.1
 Torn Edges 15.1
 Twirl 15.1
 U3D 15.1 (2014.1.0 x001)
 Underpainting 15.1
 Vanishing Point 15.1
 Variance 15.1 (2014.1.0 x001)
 Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
 Water Paper 15.1
 Watercolor 15.1
 Wave 15.1
 Wavefront|OBJ 15.1 (2014.1.0 x001)
 WIA Support 15.1 (2014.1.0 x001)
 Wind 15.1
 Wireless Bitmap 15.1 (2014.1.0 x001)
 ZigZag 15.1
Optional and third party plug-ins:
 CUR (Windows Cursor) NO VERSION
 GREYCstoration NO VERSION
 ICO (Windows Icon) NO VERSION
 Reduce Noise 7.0.0.0
 ScriptListener 13.0
 StarFilter Pro 3 3.0.5.1
 SuperPNG 2.0
Plug-ins that failed to load: NONE
Flash:
 Adobe Kuler
Installed TWAIN devices: NONE

Office Web Apps - Office Web Apps was unable to find the specified certificate

Hello,
Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this. With that said, here's my issue...
I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx Since this is a test environment, I'm planning on using a self-signed
cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.
I created the cert using the following command:
New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert". I then proceeded to try and create the OWA farm by running:
New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
This produces the following error:
New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
+ FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
What gives?

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

Unable to find the report in the manifest resources

Hi!I have problem using Crystal Report documents created in Visual Studio 2005 using the build-in version of Crystal Reports. If I create a project from scratch with one report and then some code to initialize and export the report to disk I get the following error message:"Unhandled Exception: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Unable to find the report in the manifest resources. Please build the project, and try again."I have tried using both the "Embedded resource" and the "Content" options during build, but with no luck at all. When using the Content option I explicitly load the rpt-file but no luck at all. Do anyone have a clue to what the problem is? I have absolutely no idea. The things worked in Visual Studio 2003 but not in 2005. What is the manifest resource?Would really appreciate some help, thanks in advance!My source code is below.Best regards Larsclass Program { public static TableLogOnInfo CreateConnectionInfo(string userID, string password, string serverName, string databaseName) { TableLogOnInfo conInfo = new TableLogOnInfo(); conInfo.ConnectionInfo.UserID = userID; conInfo.ConnectionInfo.Password = password; conInfo.ConnectionInfo.ServerName = serverName; conInfo.ConnectionInfo.DatabaseName = databaseName; return conInfo; } public static ReportClass CreatePersonalWillReport(TableLogOnInfo conInfo, string personID) { ReportClass doc = new ReportClass(); doc.Load(@"C:\Utveckling\reports\main\ClassLibrary1\bin\Debug\CrystalReport1.rpt"); List<ReportParameter> parameters = new List<ReportParameter>(); parameters.Add(new ReportParameter("@personID", personID)); return ApplyReportParameters(doc, parameters, conInfo); }   public static void ExportReportToDisk(string fileName, ReportClass report, ExportFormatType formatType) { report.ExportToDisk(formatType, fileName); } protected static ReportClass ApplyReportParameters(ReportClass report, List<ReportParameter> paramList, TableLogOnInfo conInfo) { foreach (Table t in report.Database.Tables) { t.ApplyLogOnInfo(conInfo); } foreach (Section s in report.ReportDefinition.Sections) { foreach (ReportObject ro in s.ReportObjects) { if (ro.Kind == CrystalDecisions.Shared.ReportObjectKind.SubreportObject) { SubreportObject sro = (SubreportObject)ro; ReportDocument doc = sro.OpenSubreport(sro.SubreportName); foreach (Table t in doc.Database.Tables) { t.ApplyLogOnInfo(conInfo); } } } } foreach (ParameterFieldDefinition paramField in report.DataDefinition.ParameterFields) { foreach (ReportParameter rp in paramList) { if (paramField.Name == rp.Name) { ParameterValues pv = paramField.CurrentValues; string s = (string)rp.Value.Value; ParameterDiscreteValue pdv = new ParameterDiscreteValue(); pdv.Value = s; pv.Add(pdv); paramField.ApplyCurrentValues(pv); } } } return report; }  static void Main(string[] args) { TableLogOnInfo conInfo = CreateConnectionInfo("username", "password", "server", "database"); ReportClass report = CreatePersonalWillReport(conInfo, "-1291000956"); ExportReportToDisk("C:\temp\report.pdf", report, ExportFormatType.PortableDocFormat); }/// <summary>/// Helper class that contains parameter key/value pairs./// </summary>protected class ReportParameter {/// <summary>/// The parameter name./// </summary>private string name = null;/// <summary>/// The parameter value./// </summary>private ParameterDiscreteValue value = new ParameterDiscreteValue();/// <summary>/// The parameter name./// </summary>public string Name {get {return this.name;}set {this.name = value;}}/// <summary>/// The parameter value./// </summary>public ParameterDiscreteValue Value {get {return this.value;}set {this.value = value;}}/// <summary>/// The constructor./// </summary>/// <param name="name">the parameter name</param>/// <param name="value">the parameter value</param>public ReportParameter(string name, object value) {this.name = name;this.value.Value = value;}}

Lars,
Â Have you read the CRnet_deployment.doc if not it may help fix your problem (It didnt mine but hey you may be lucky) See http://support.businessobjects.com/communitycs/technicalpapers/crnet_deployment.pdf
I have a similar issue but in 2003.net using the bundled CR package. I'm trying to use CR in a Web Service called from a Compact Framework device. I've confirmed I'm using the correct Merge Modules & my Build Actions are all set as stated in the CR Application Deployment document but it still spits out Unable to find the report in the manifest resources
I've looked extensively on the net and while others have had this problem the only advice I've seen revolves around embedded build actions and using the correct merge modules. There must be something else causing this problem and some one who has found a way round it?!?
If your that someone please take 5 minutes out and help a couple of guys in distress?
Thanks in advance,
Ian

Unable to find the report in the manifest resources. Please build the project, and try again.

The error is received when i transfer the .exe file, bin\Debug folder to another machine:
Unable to find the report in the manifest resources. Please build the project, and try again.
The error is issued when i try to open the form that contain the Crystal report viewer, I already checked the properties of the report file and it says "Embed Resource" in the "Build Action"
This error is not visible on my development machine where visual studio is installed, anybody know what i should install on the other machine for this to run.
I'm using C#, WinForms, .net 2.0, VS 2005.

Fronde Systems Group:
Setting the build action to Embedded resource is working
in my local machine which has Visual studio 2003 installed. But when i deploy the same on Server
(server has no .net framework installed on it), it keeps failing. I get the the following error:
"ERROR Thrown from Crystal Reports ===> An undocumented error occured" which is triggered when it is Unable
to find the report in the manifest resources.
Please suggest me guys....
Thanks
Ravi
[email protected]

[RESOLVED] "Unable to find the current servlet" error

Hi,
I had a couple of ADF applications deployed to the application server, and running. I was working on adding security to a new one, and started getting the following error whenever I tried to access one of my pages after deployment:
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet (full trace from the application.log below)
I initially assumed it was a problem with the new application, but when I tried to access the older ones, which had been working, I found I get the same error. I've spoken to the app server administrator, who assures me nothing has been changed in the OC4J/J2EE area.
I'm also getting the following error in server.log, but not at exactly the same time as the application log error, so I'm not sure it's related:
07/11/12 17:00:05 Internal error raised trying to instantiate web-application
java.lang.InstantiationException: No application named 'datatags' found in the server
at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:705)
at com.evermind.server.http.HttpSite.getApplication(HttpSite.java:438)
at com.evermind.server.http.AJPRequestHandler.initAJP(AJPRequestHandler.java:733)
at com.evermind.server.http.AJPRequestHandler.initRequest(AJPRequestHandler.java:469)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:194)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Any ideas what might be causing this? Or where I should look for more info?
Thanks.
From application.log:
07/11/12 16:48:18 MembershipApplicationView: Servlet error
javax.servlet.ServletException: JAAS-OC4J: JAZNFilter.doFilter - unable to find the current servlet
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:253)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
Message was edited by:
CdG

Never mind, please ignore this entire post. I've been trying to figure out how to add security based on the JDeveloper help and some forum posts, and I'd unknowingly configured an ADF Security filter in the middle of my otherwise container-managed security. If I delete that, everything 'miraculously' starts working again.
Sorry to have wasted your time.

Error unable to install the Add-on

Hi, I have the Creative Cloud membership.
I just re-installed the CC on a new computer (iMac).
I keep getting the message
“Unable to install the Add-on ID imposter Trial (error -603) (referring to Indesign, but the message comes up regularly).
As I don’t have the Add-On because it was only a trial, I have nothing to delete.
I have already looked at all the information on Add-ons. It does not mention this problem.
How can I stop this message appearing?
Thank you,
Mac 10.9.5 Mavericks, 32G ram, iMac27 3T HD

Hi - unfortunately I do NOT have the plug-in. It was a trial and I removed it. But for some reason, the CC installer seems to think it's still around and I don't know how to get rid of it.
I am on a new computer so I don't understand why it's saying this.
Cheers.

ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.

Hi,
Can anyone advice on below issue?
ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.
Add the missing Support Packages or repeat the current step and change the add-on selection.
Missing Support Package(s):
Correction
Component
IW_FNDGC
I have manually download these components which is SAPK-10001INIWFNDGC and SAPK-10002INIWFNDGC and put it in the download directory and repeat the phase.
Besides, I also checked that these 2 components were inside EPS/in folder CSN0120061532 0083837 PAT and CSN0120061532 0079648 PAT
Thanks and regards,
Shu Jie

Hi Shu Jie,
you can't delete already installed add-ons. Please refer to note #1569624:
It is not possible to uninstall GATEWAY 2.0
Before you install the GATEWAY 2.0, keep in mind that you cannot uninstall ABAP add-ons.
The add-on GW CORE will be merged in IW_FNDGC. This information can also be found in above note:
Please
note:
GW_CORE 200 is not released for SAP_BASIS 740.
The successor is IW_FNDGC 100.
There are two possible reason for your error:
The stackfile is not well configured.
Your SUM is not the very latest one. SUM SP10 contained a bug in its first patch levels which shows retrofitted components in IS_SELECT.
Cheers,
Andreas

Unable to find the UK HP technical helpline for my unresolved problem with my HP Mini Notebook

I am unable to find the UK HP technical helpline for my unresolved problem with my HP Mini Notebook, I seem to keep going round in circles on the web site. Can anyone please give me the UK HP technical helpline number. My 'No Disk Error has not been resolved as yet. Thank you if anyone can help. Jan

Hi, Jan:
Below is the telephone contact info you need...
In-Warranty & Out-of-Warranty
0207 660 0596
(Only valid within the UK)
Mon-Fri 8.30-18.00
Sat 10.00-16.00
(except for Bank Holidays)

Unable to find the default new form for list mylist1 - deploying the list instance via module feature

hi,
am facing a problem deploying a list instance via a feature,
I created the list in the UI with content and views.
Exported the site template as WSP.
Imported into Visual Studio the list instance, pages module and property bags.
Copied into my new solution.
Deploy list instance as a site-collection level scoped feature.
activated the below features :
mylist_ModulesFeature
mylist_ListInstancesFeature
mylist_PropertyBagFeature
List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
can anyone pls help why i am getting this error ?

try these links:
http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
Please mark answer as correct if it is correct else vote for it if you find it useful

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

Unable to find the data source in r/3 ECC 6.0 - ( 0FI_GL_10 ) in RSA5

Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
Gupta

Hi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK

Unable to find the content of data source into infosource

Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?

after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M.

Unable to find the Workbook named......

Helle All,
I am getting the following error when I call a Discoverer report from a URL link.
"Unable to find the Workbook named:ASSIGNEDPROJECTTEAMRPT
Select a valid Workbook from the list below."
When I get this error the worksheet called "ASSIGNEDPROJECTTEAMRPT" is in the list below. I am wondering why it says the worksheet doesn't exist then gives it to me a list?
Any ideas?
Thanks for any help,
Bradley

Whoops that would be "Hello All"
Bradley

Unable to find the Workbook named:REN_SUM1

Unable to find the Workbook named:REN_SUM1 Portal error
I am getting this error when i click the link in portal screen. The link should display a discoverer report. I am displaying the discoverer reports from portal.
Unable to find the Workbook named:REN_SUMMARY21
Select a valid Workbook from the list below.
However it provides a list of workbooks and from there i am able to select.

Whoops that would be "Hello All"
Bradley

Unable to find the Add-on SAP_BS_FND Keep with Vendor Key

Similar Messages

Maybe you are looking for