Unable to find the Dc in NDS
HI Experts,
I have created one Webdynpro Dc and i have activated that.
activation was successful then i removed my configuration from nds.when i reimported the configuration from CMS
i am getting the Webdynpro dc.i ahev checked in dtr it's available and i have checked in sbc also activities are there.
can anyone suggest me the solution.
thanks in advance
With Regards
Balaram Naidu
Is this SSA system assigned to the track as a runtime system? If so, to which stage?
Similar Messages
-
I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?
Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.
-
Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
GuptaHi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK -
Unable to find the content of data source into infosource
Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M. -
Unable to find the Workbook named......
Helle All,
I am getting the following error when I call a Discoverer report from a URL link.
"Unable to find the Workbook named:ASSIGNEDPROJECTTEAMRPT
Select a valid Workbook from the list below."
When I get this error the worksheet called "ASSIGNEDPROJECTTEAMRPT" is in the list below. I am wondering why it says the worksheet doesn't exist then gives it to me a list?
Any ideas?
Thanks for any help,
BradleyWhoops that would be "Hello All"
Bradley -
Unable to find the Workbook named:REN_SUM1
Unable to find the Workbook named:REN_SUM1 Portal error
I am getting this error when i click the link in portal screen. The link should display a discoverer report. I am displaying the discoverer reports from portal.
Unable to find the Workbook named:REN_SUMMARY21
Select a valid Workbook from the list below.
However it provides a list of workbooks and from there i am able to select.Whoops that would be "Hello All"
Bradley -
Unable to find the published output for this request - problem
Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regardsHi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein -
Photoshop CS5 is unable to find the JavaScript plug-in.
I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in." It does this with an action that was designed for me to put the filename, copyright symbol, and studio name on 4x5 proofs. It also comes up when I try to use the keyboard shortcut Ctrl/Shift/W to close a file and go to bridge. There have been some other batch operations that will not load.
I have downloaded Java; trashed the Preferences in Photoshop and Bridge; and also uninstalled and re-installed CS5 and none of this has worked. Any ideas of what to do next?
Bob BrantAdobe Photoshop uses its own Javascript plugin not an external third party javescript. Its a required Plugin ScriptingSupport:
ScriptingSupport 15.1
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 32908 MB
Memory available to Photoshop: 37134 MB
Memory used by Photoshop: 94 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro 4000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.4052"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro 4000/PCIe/SSE2"
glgpu[0].GLRendererID=1757
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20140702000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro 4000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="340.52"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="6.5.12"
clgpu[0].CLBandwidth=7.49299e+010
clgpu[0].CLCompute=184.366
License Type: Subscription
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 175.6G free
C:\, 224.2G, 105.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.1
Plugin.dll Adobe Photoshop CC 2014 15.1
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.1
PSViews.dll Adobe Photoshop CC 2014 15.1
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.1 (2014.1.0 x001)
Accented Edges 15.1
Adaptive Wide Angle 15.1
Angled Strokes 15.1
Average 15.1 (2014.1.0 x001)
Bas Relief 15.1
BMP 15.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.1
Charcoal 15.1
Chrome 15.1
Cineon 15.1 (2014.1.0 x001)
Clouds 15.1 (2014.1.0 x001)
Collada 15.1 (2014.1.0 x001)
Color Halftone 15.1
Colored Pencil 15.1
CompuServe GIF 15.1
Conté Crayon 15.1
Craquelure 15.1
Crop and Straighten Photos 15.1 (2014.1.0 x001)
Crop and Straighten Photos Filter 15.1
Crosshatch 15.1
Crystallize 15.1
Cutout 15.1
Dark Strokes 15.1
De-Interlace 15.1
Dicom 15.1
Difference Clouds 15.1 (2014.1.0 x001)
Diffuse Glow 15.1
Displace 15.1
Dry Brush 15.1
Eazel Acquire 15.1 (2014.1.0 x001)
Embed Watermark 4.0
Entropy 15.1 (2014.1.0 x001)
Export Color Lookup NO VERSION
Extrude 15.1
FastCore Routines 15.1 (2014.1.0 x001)
Fibers 15.1
Film Grain 15.1
Filter Gallery 15.1
Flash 3D 15.1 (2014.1.0 x001)
Fresco 15.1
Glass 15.1
Glowing Edges 15.1
Google Earth 4 15.1 (2014.1.0 x001)
Grain 15.1
Graphic Pen 15.1
Halftone Pattern 15.1
HDRMergeUI 15.1
IFF Format 15.1
IGES 15.1 (2014.1.0 x001)
Ink Outlines 15.1
JPEG 2000 15.1
Kurtosis 15.1 (2014.1.0 x001)
Lens Blur 15.1
Lens Correction 15.1
Lens Flare 15.1
Liquify 15.1
Matlab Operation 15.1 (2014.1.0 x001)
Maximum 15.1 (2014.1.0 x001)
Mean 15.1 (2014.1.0 x001)
Measurement Core 15.1 (2014.1.0 x001)
Median 15.1 (2014.1.0 x001)
Mezzotint 15.1
Minimum 15.1 (2014.1.0 x001)
MMXCore Routines 15.1 (2014.1.0 x001)
Mosaic Tiles 15.1
Multiprocessor Support 15.1 (2014.1.0 x001)
Neon Glow 15.1
Note Paper 15.1
NTSC Colors 15.1 (2014.1.0 x001)
Ocean Ripple 15.1
OpenEXR 15.1
Paint Daubs 15.1
Palette Knife 15.1
Patchwork 15.1
Paths to Illustrator 15.1
PCX 15.1 (2014.1.0 x001)
Photocopy 15.1
Photoshop 3D Engine 15.1 (2014.1.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.1 (2014.1.0 x001)
Pinch 15.1
Pixar 15.1 (2014.1.0 x001)
Plaster 15.1
Plastic Wrap 15.1
PLY 15.1 (2014.1.0 x001)
PNG 15.1
Pointillize 15.1
Polar Coordinates 15.1
Portable Bit Map 15.1 (2014.1.0 x001)
Poster Edges 15.1
Radial Blur 15.1
Radiance 15.1 (2014.1.0 x001)
Range 15.1 (2014.1.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.1
Ripple 15.1
Rough Pastels 15.1
Save for Web 15.1
ScriptingSupport 15.1 <---------------------------------------------------------------------------------------- -----------------------------------------------------------------------------
Shake Reduction 15.1
Shear 15.1
Skewness 15.1 (2014.1.0 x001)
Smart Blur 15.1
Smudge Stick 15.1
Solarize 15.1 (2014.1.0 x001)
Spatter 15.1
Spherize 15.1
Sponge 15.1
Sprayed Strokes 15.1
Stained Glass 15.1
Stamp 15.1
Standard Deviation 15.1 (2014.1.0 x001)
STL 15.1 (2014.1.0 x001)
Sumi-e 15.1
Summation 15.1 (2014.1.0 x001)
Targa 15.1
Texturizer 15.1
Tiles 15.1
Torn Edges 15.1
Twirl 15.1
U3D 15.1 (2014.1.0 x001)
Underpainting 15.1
Vanishing Point 15.1
Variance 15.1 (2014.1.0 x001)
Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
Water Paper 15.1
Watercolor 15.1
Wave 15.1
Wavefront|OBJ 15.1 (2014.1.0 x001)
WIA Support 15.1 (2014.1.0 x001)
Wind 15.1
Wireless Bitmap 15.1 (2014.1.0 x001)
ZigZag 15.1
Optional and third party plug-ins:
CUR (Windows Cursor) NO VERSION
GREYCstoration NO VERSION
ICO (Windows Icon) NO VERSION
Reduce Noise 7.0.0.0
ScriptListener 13.0
StarFilter Pro 3 3.0.5.1
SuperPNG 2.0
Plug-ins that failed to load: NONE
Flash:
Adobe Kuler
Installed TWAIN devices: NONE -
I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?
If you never bought the product then you cannot get the serial number.
-
fter updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?
Apple removed blood glucose until further notice. The reason behind this is that it gave a distorted picture in countries where the medical world used other measuring units. I suspect it will be available again in a future update.
-
How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.
Backup drive?
Subscribe to iTunes Match?
If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck. A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work. You can buy a lot of CDs for $200. -
Office Web Apps - Office Web Apps was unable to find the specified certificate
Hello,
Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this. With that said, here's my issue...
I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx Since this is a test environment, I'm planning on using a self-signed
cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.
I created the cert using the following command:
New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert". I then proceeded to try and create the OWA farm by running:
New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
This produces the following error:
New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
+ FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
What gives?Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi -
Unable to find the path of automatic (command line) backup of LCM
I created the batch script to take the LCM backup on Essbase/FDQM (ESB01)
Detail is as under
1. Copy utility.sh and utility.bat file from D:\Oracle\Middleware\EPMSystem11R1\common\utilities\LCM\11.1.2.0\bin to D:\Oracle\Middleware\user_projects\epmsystem1\bin
2. Generate the xml file (Login on Shared Service Console as admin user
Application Group → Foundation → Shared Service → Select All → Define Migration → Next → Enter File System Name → Next → Next → Save Migration Definition → Save the xml File
3. D:\Oracle\Middleware\user_projects\epmsystem1\bin>type WeeklyMigration.bat
utility.bat MigrationDefinition.xml
4. First time have to run manual, It will store the credentials in xml file (MigrationDefinition.xml)
D:\Oracle\Middleware\user_projects\epmsystem1\bin>WeeklyMigration.bat
>>> Enter username - admin
>>> Enter Password –
batch file executed sucessfully as below
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>weeklyMigration.bat
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>utility.bat MigrationDefinition.xml
Sep 15, 2013 11:26:19 PM com.hyperion.hit.registry.DatabaseComponentImpl getData
baseHostName
INFO: Registry DB has been configured with thin driver jdbc:oracle:thin:@jxebdrd
b.dpworld.ae:1576:DPUT.
Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
INFO: Client Enable Status false
Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
INFO: Audit Client has been created for the product HUB-11.1.2.0
Sep 15, 2013 11:26:21 PM
INFO: Initializing CMSClient.
Sep 15, 2013 11:26:21 PM
INFO: CMSClient initialized successfully.
Sep 15, 2013 11:26:21 PM
INFO: Checking if application group Foundation exists in Registry.
Sep 15, 2013 11:26:21 PM
INFO: Validating user inputs.
Sep 15, 2013 11:26:21 PM
INFO: User input validations done.
Sep 15, 2013 11:26:21 PM
INFO: Checking if application group Foundation exists in Registry.
Sep 15, 2013 11:26:21 PM
INFO: Retrieving application id for application with display-name Shared Service
s.
I had remvoe display line.
Exported Artifact - Groups.
Sep 15, 2013 11:26:26 PM com.hyperion.css.exchange.framework.CSSIEJob doExport:8
3
INFO: Successfully exported 0 roles.
Exported Artifact - Roles.
Exported Artifact - DPWUAE.
Exported Artifact - fdqm_app.
Exported Artifact - Reporting and Analysis.
Exported Artifact - Essbase Studio Server2.
Exported Artifact - HBRAPP.
Exported Artifact - Shared Services.
Exported Artifact - Sample.
Exported Artifact - Sample_U.
Exported Artifact - DMDemo.
Exported Artifact - EssbaseCluster-1.
Exported Artifact - Samppart.
Exported Artifact - TestCube.
Exported Artifact - ASOsamp.
Exported Artifact - Demo.
Exported Artifact - Sampeast.
Migration Status - Success
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>
Now I unable to find the LCM backup file, where it has generate? what is the location of the backup file by this batch execution?As for my knowledge "." will fetch from the directory where we are running.Exactly. A directory. Not a JAR file. If you want to access it via File, you can't put it into the JAR. if you want to put it into the JAR, you need to use Class.getResource() and friends.
-
Java.io.IOException: unable to find the type mapping resource file
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
> -
Unable to Find the Type Mapping Resource File (Two web services)
Hello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luisHello,
I am using BEA weblogic 7.0 to deploy my applications. I have a web service and was able to deploy it sucessfully. I am trying to access this web service from another web service previously succesfully deployed too. When I call the second one, I have the next problem:
java.io.IOException: unable to find the type mapping resource file for:tuoprec.sinsesion.TuOPRecService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegistry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at tuoprec.sinsesion.TuOPRecService_Impl.<init>(TuOPRecService_Impl.java
I put the client jar file (2nd web service) obtained from the <clientgen> in the class path of the ear file (1st web service), but I have the same error.
Can anybody help me?,
jose luis
Maybe you are looking for
-
Hi, My excel file contains a logo , text and other information . I have to send this excel file(which is on the local PC in the C drive ) as email attachment .So I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 . The receiver is able to get the mail
-
Safari back button goes back to Top Sites rather than search results
When I launch Safari, it begins at the Top Sites page. I use the unified search/URL bar to search something on Google. I click on one of the results and decide that's not the answer I wanted so I hit the back arrow in Safari to go back to the searc
-
I have a song that simply doesn't open up in AA. I've converted it in different formats in an attempt to see if it would accept one of the formats, including wav, mp3, aif and au. But in all cases the song just doesn't open. I also tried making a co
-
Hi Guys, I really need your help. I used to use Flash MX a while back. I can animate in flash really well. but my problem is the action script. Basicly, i'm design a simple learning interface. at the begining, theintro loads up, but then i need it to
-
Hi friends, I have one table like: 10 SAM 10 CAN 10 MAN 10 DEV 20 MAL And want output like: 10 SAM,CAN,MAN,DEV 20 MAL i want to combine multiple rows into one within an existing view. What query will suit this to get this type of output.