Unable to find the directory
Hi,
I created a directory by connecting to apps schema as
CREATE OR REPLACE DIRECTORY in_file_loc AS '/tmp'; in sqlplus.
when i try to find out the same in unix box i am not able to find out the directory which was created.
Can you please guide whether i am doing the correct process or not.
Thanks,
Zaheer.
Hi;
I created a directory by connecting to apps schema as
CREATE OR REPLACE DIRECTORY in_file_loc AS '/tmp'; in sqlplus.
when i try to find out the same in unix box i am not able to find out the directory which was created.You need to create physicaly first on your server than you need to use upper syntax and define it in your db again.
Regard
Helios
Similar Messages
-
Error: unable to find the directory
Hi experts!!
While configuring the scenario ( File to MSACCESS) , I am getting an error msg
<b>Processing Error: Directory /lenovo-1a1a67e1/sender does not exist!</b>
sender folder is in my Laptop and I configured the scenario in main server.
so it has to pick the files frm the laptop...( Source ).
can anyone help me how to give the parameters for ( when the file is in Network)
Thanks in advance
suneeeHi,
I configured FTP protocol and gave the parameters as follows:
FTP Connection Parameters:
server : 192.168.1.198
port : 21
anonymous logi - checked
connect mode : permanently
transfer mode : Binary
Folder : c:/sender
filename : access.xml
and now I am getting the error as follows....but the files in the source folder has not picked. the error is as follows:
S<b>ender Adapter v1014 for Party '', Service 'BS_ACCESS1_S':
Configured at 11:44:09 2007-01-11
Up and running - no message processing until now</b>
Thanks in advance.
Sunee -
Unable to find the servicetag directory under /var/sadm
Hello,
I built couple of Ldom's using the FLAR, and i logged into the Ldom and trying to delete the servicetag.xml file, but i was unable to find the "servicetag" directory it self, any ideas what went wrong?
Thanks,
SA.Hi Priya,
There are some articles on SDN to show images/attachments in laptop application. You can check them out.
http://wiki.sdn.sap.com/wiki/display/mobile/UploadingAttachments-NetweaverMobile7.1
http://wiki.sdn.sap.com/wiki/display/mobile/CreateapplicationsusingBinaryMemoandTextMemoinNetweaverMobile+7.1
Also the path is for NWDS, at client you need to go thry program files path & then mobile apps & then the DC -> component.....
Reg,
Nipun
Edited by: Nipun Dev on Sep 22, 2010 11:12 AM -
Unable to find the path of automatic (command line) backup of LCM
I created the batch script to take the LCM backup on Essbase/FDQM (ESB01)
Detail is as under
1. Copy utility.sh and utility.bat file from D:\Oracle\Middleware\EPMSystem11R1\common\utilities\LCM\11.1.2.0\bin to D:\Oracle\Middleware\user_projects\epmsystem1\bin
2. Generate the xml file (Login on Shared Service Console as admin user
Application Group → Foundation → Shared Service → Select All → Define Migration → Next → Enter File System Name → Next → Next → Save Migration Definition → Save the xml File
3. D:\Oracle\Middleware\user_projects\epmsystem1\bin>type WeeklyMigration.bat
utility.bat MigrationDefinition.xml
4. First time have to run manual, It will store the credentials in xml file (MigrationDefinition.xml)
D:\Oracle\Middleware\user_projects\epmsystem1\bin>WeeklyMigration.bat
>>> Enter username - admin
>>> Enter Password –
batch file executed sucessfully as below
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>weeklyMigration.bat
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>utility.bat MigrationDefinition.xml
Sep 15, 2013 11:26:19 PM com.hyperion.hit.registry.DatabaseComponentImpl getData
baseHostName
INFO: Registry DB has been configured with thin driver jdbc:oracle:thin:@jxebdrd
b.dpworld.ae:1576:DPUT.
Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
INFO: Client Enable Status false
Sep 15, 2013 11:26:20 PM oracle.EPMAUDITCLIENT
INFO: Audit Client has been created for the product HUB-11.1.2.0
Sep 15, 2013 11:26:21 PM
INFO: Initializing CMSClient.
Sep 15, 2013 11:26:21 PM
INFO: CMSClient initialized successfully.
Sep 15, 2013 11:26:21 PM
INFO: Checking if application group Foundation exists in Registry.
Sep 15, 2013 11:26:21 PM
INFO: Validating user inputs.
Sep 15, 2013 11:26:21 PM
INFO: User input validations done.
Sep 15, 2013 11:26:21 PM
INFO: Checking if application group Foundation exists in Registry.
Sep 15, 2013 11:26:21 PM
INFO: Retrieving application id for application with display-name Shared Service
s.
I had remvoe display line.
Exported Artifact - Groups.
Sep 15, 2013 11:26:26 PM com.hyperion.css.exchange.framework.CSSIEJob doExport:8
3
INFO: Successfully exported 0 roles.
Exported Artifact - Roles.
Exported Artifact - DPWUAE.
Exported Artifact - fdqm_app.
Exported Artifact - Reporting and Analysis.
Exported Artifact - Essbase Studio Server2.
Exported Artifact - HBRAPP.
Exported Artifact - Shared Services.
Exported Artifact - Sample.
Exported Artifact - Sample_U.
Exported Artifact - DMDemo.
Exported Artifact - EssbaseCluster-1.
Exported Artifact - Samppart.
Exported Artifact - TestCube.
Exported Artifact - ASOsamp.
Exported Artifact - Demo.
Exported Artifact - Sampeast.
Migration Status - Success
D:\Oracle\MIDDLE~1\USER_P~1\EPMSYS~1\bin>
Now I unable to find the LCM backup file, where it has generate? what is the location of the backup file by this batch execution?As for my knowledge "." will fetch from the directory where we are running.Exactly. A directory. Not a JAR file. If you want to access it via File, you can't put it into the JAR. if you want to put it into the JAR, you need to use Class.getResource() and friends.
-
Java.io.IOException: unable to find the type mapping resource file
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
> -
Getting error "Unable to find the published output for this request"
1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
ThanksI tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options. -
Identity service unable to find the realm
hi'
I am facing issue after configuring "Configuring Identity Service with Oracle Internet Directory"
I followed this administrator guide "http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref280"
this is the result after running the script:
C:\product\10.1.3.1\OracleAS_1\bpel\system\services\install\ant-tasks>configure_
oid orcladmin welcome1 389 false sonata seedAllUsers oc4jadmin welcome1 oc4j_soa
Buildfile: oid-config.xml
config-oid:
[echo] Configuring OID...
[mkdir] Created dir: C:\product\10.1.3.1\OracleAS_1\ldap\install
[java] Install Configuration
[java] Install Type: ConfigureOID
[java] Oracle Home: C:\product\10.1.3.1\OracleAS_1
[java] JDK Home: C:\product\10.1.3.1\OracleAS_1\jdk
[java] Proxy Required: false
[java] Database Vendor: oracle
[java] OID Host: ${oid.host}
[java] OID Port: 389
[java] OID Realm: sonata
[java] OID Seed: seedAllUsers
[java] Admin User: orcladmin
[java] ***************************************************************
[java] Trying to obtain OID specific details from configuration files.
[java] Warning: You would encounter problems if you have not associated you
r instance with an OID.
[java] ***************************************************************
[java] OID Host is: son1592
[java] OID Port is: 389
[java] Seeding users/roles in OID realm : sonata...
[java] Buildfile: bpminstall.xml
[java] seed-oid:
[java] init:
[java] seed-oid:
[java] Seeding system users/roles into OID ...
[java] Migration of LDIF data completed. All the entries are successfully m
igrated
[java] Seeding demo users/roles into OID ...
[java] Migration of LDIF data completed. All the entries are successfully m
igrated
[java] BUILD SUCCESSFUL
[java] Total time: 9 seconds
[java] Exit: 0
[java] Configuring BPEL identity service configuration file ...
[java] Adding jaas-mode attribute to hw_services orion-application.xml
[java] Adding jaas-mode attribute to orabpel orion-application.xml
bpel-grant-privileges:
[echo] Granting Server privileges to BPMSystemAdmin role...
[java] The specified permission has already been granted to the grantee.
[echo] Granting Domain privileges to BPMDefaultDomainAdmin role...
[java] The specified permission has already been granted to the grantee.
all:
BUILD SUCCESSFUL
Total time: 13 seconds
now when I am using the IdentityService servlet to look up users and roles by going to http://localhost:9700/integration/services/IdentityService/identity?operation=lookupUser and checking the realm
this is the error coming:
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://xmlns.oracle.com/bpel/services/IdentityService">
<env:Body>
<env:Fault
xsi:type="env:Fault">
<faultcode>env:Server</faultcode>
<faultstring
xsi:nil="1"/>
<detail>
<ns0:identityServiceError>
<ns0:faultInfo>Realm is not found. Identity service unable to find the realm by name sonata. Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable. </ns0:faultInfo>
</ns0:identityServiceError>
</detail>
</env:Fault>
</env:Body>
</env:Envelope>
thanks
Yatanhi Anirudh,
do you think this is wrong approach to copy file from home to other instances? actually I followed the following link to configure OID with BPEL
url--> "http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#BABIBGFF"
as per the document after executing the configure_oid.bat file only the jazn.xml inside the home was getting updated but no change was there in jazn.xml which was inside oc4j_soa folder, this was infact told in the document that we need to manually copy the properties from home--> jazn.xml file, but when I was trying to copy it was giving error, so insted of copying any thing from home--> jaxn.xml file, I copied the file and replaced it inside oc4j_soa.
do you think this is not the right approach?
waiting for inputs.
thanks
Yatan -
System: unable to find the specified object.
I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advanceHi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question.. -
Unable to find the file NavGuide.htm
I installed some extensions yesterday, and promptly uninstalled them again. Now I am getting the following message:
Unable to find the file NavGuide.htm in the Confirutration/Floaters directory. The floater will not be shown.
Any suggestions on what config file I need to clean up that removing the extension didn't clean up for me?Well, Adobe support got back to me with a quick and easy solution to reset the configuration
settings:
1. Quit Dreamweaver.
2. Rename the Configuration folder in the "Users\[user]\AppData\Roaming\Adobe\Dreamweaver CS4\(installation language)\" folder.
3. Open regedit and delete the whole "HKEY__CURRENT_USER\Software\Adobe\Dreamweaver CS 4" key.
4. Restart Dreamweaver and it will be like a new installation.
This would obviously loose any other configuration, but would also work to fix any other extension clean up issues. The nice thing was that the extension manager still showed my old extension as installed, just not active so I didn't have to redownload them. -
I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?
Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.
-
Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
GuptaHi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK -
Unable to find the content of data source into infosource
Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M. -
Unable to find the Workbook named......
Helle All,
I am getting the following error when I call a Discoverer report from a URL link.
"Unable to find the Workbook named:ASSIGNEDPROJECTTEAMRPT
Select a valid Workbook from the list below."
When I get this error the worksheet called "ASSIGNEDPROJECTTEAMRPT" is in the list below. I am wondering why it says the worksheet doesn't exist then gives it to me a list?
Any ideas?
Thanks for any help,
BradleyWhoops that would be "Hello All"
Bradley -
Unable to find the Workbook named:REN_SUM1
Unable to find the Workbook named:REN_SUM1 Portal error
I am getting this error when i click the link in portal screen. The link should display a discoverer report. I am displaying the discoverer reports from portal.
Unable to find the Workbook named:REN_SUMMARY21
Select a valid Workbook from the list below.
However it provides a list of workbooks and from there i am able to select.Whoops that would be "Hello All"
Bradley -
Unable to find the published output for this request - problem
Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regardsHi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein
Maybe you are looking for
-
How to find a region in the Arrange Window
I'm trying to find two audio files that are apparently in regions in my arrange window on Logic 9. I can see them in my Audio Bin but I have no idea where to find them in my Arrange Window. I don't know if they're wedged in between or underneath a
-
Characters at Access Connections 5.30 are missing, there are only other symbols
Hello, I've the problem that the Lenovo Access Connections is missing the letters from any buttons. The problem is the same at 5.21. http://img192.imageshack.us/my.php?image=0406.png Before 5.21 was everything allright and it will be allright again i
-
Hi, In which table the Web form datas will be stored in EPM Planning repository. Please provide the table details. Thanks Kumar Edited by: kumarp on Aug 13, 2012 7:17 AM
-
Cannot connect in windows on macbookpro
Hello people. just bought a mac book pro. Installed windows xp via bootcamp, everything ok. But when i try to connect to the internet on windows, it can not as there is no ip addres. It connects to my wireless network, but then again no, as it says i
-
What happened to my contract?
Previously with BT for phone calls only, I ordered Unlimited Broadband with Infinity 1 in January 2015. I agreed a 12 month contract (broadband and calls) for £23 per month, discounted to £10 per month for the year. I would also get BT Sport for free