Unable to find the master data loaded request in manage tab

Hi All,
Iam unable to see the loaded request in the master data manage tab after some time of loading.
Immediately after loading i could see the request.If i revisit the manage tab,iam unable to see the request.
However data is available for the info object .
Can anyone please suggest on this.
Regards,
Kavya

hi Devupalli,
Note your request number, find it using RSRQ tcode. Now click on the target icon and see if it takes you to the manage of your infoobject.
There is a very common error which we sometimes make: are u sure you're checking the right thing? please check that if your infoobject has text, attribute and hierarchy, you're checking in the manage of the relevant one.
For ex, if you're loading text, you have to go to manage of the text.
Hope this helps!
Sheen

Similar Messages

I want delete the Master data loads which i have already loaded earlier

Hi BW Guru's,
I want delete the Master data loads.
But i am unable to delete.
is there any option to delete from RSD1
Please send steps

Hi,
If that master data related ifo is present in cube u cont delete master data.
In that case u have to delete req in cube then u can delete
let me know further
*******Asgin Points if usefull***
Cheers,
Satya

Problem with the master data loads

Hi Guys,
I am trying to load 0MATERIAL_ATTR in QA,but it is throwing error(Record 2 :0MATERIAL : Data record 2 ('000000000000000012 '): Version '000000000000000012 ' is not va ) and also similar error is coming when i load for 0VERSION(Record 1 :0VERSION : Data record 1 ('000E '): Version '000 ' is not valid ).
but for the same master data object in development with the same R/3 data the loads are successful,only in QA it is giving the problem.

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Regarding the Master Data Loading

Hi Experts,
Can any one tell me the solution for me .I loaded the master data of an 0customer_attr to an info object standard "0customer".But here what happening means customer number kunnr is sucessfully loded but the ATTRIBUTES data was not loaded into the "0customer".Here i run the attribute change run as well as i load the data by using delta and full load .Can you suggest me is there any other solution for me to do.To get the attributes data.
Bye.

Hi
Check your processing type on infopack. May be it's only selected PSA only.
Regards,
Chandu.

Checking the Master Data Load

Hi,
If my report doesn't work and I have to check the Master data is uploaded properly or no, How do I check that?
Can you help with the steps?
Thank you.

Hi Radha,
The shortest way to check the Master data of any info object is:
Goto SE16 or SE11:
In the table text box give: /BI0 or C/MXXXXXXXXX
'0' for SAP generated infoobject
'C' for Customer generated infoobject
View of MstrDtaTbls: 'M'
Master data tab: 'P'
SID table attr.: 'X'
Text Table: 'T'
XXXXXXX - infoobject.
Hopes this helps.
Regards,
Ravi Kanth

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Unable to delete the Master Data

Hello Gurus--
How to delete the unused MD for an Infoobject,.
Unused MData were in A version in M,P and text tables.
Thru the program "RSDMD_DEL_PARALLELIZER" and "RSDMD_DEL_BACKGROUND" The MD hadn't got deleted.
Scheduled the above programs and checked the logs in SLG1 for both used and unused MD,.
The logs says that
a) Checked,.and I confirm that the unused MD is not present in any targets.
b) MD deletion hadn't happened for my unused MD.
--> The MD is in A version in the M,P, Text tables, if it is in M version these data can be deleted,,
Checked for the same in all the forums .
Couldn't able to find the same.
Very very Ungent sirs' !!!
Regards
Vishwa.

Infoobject --> right clikc --> maintain master data
Select rows u wanted to delete and click 'Delete' icon. And SAVE.
If system prompt u 'some master data cannot be deleted' .. continue with this message.
then goto tcode SLG1-- enter Object: RSDMD and Subobject: MD_DEL and User: ur userID and F8
In the next screen Expand node and dbl click 'Problem class additional information'
This will give u which ever objects using SIDs of this master data.
U should delete this SID according to that list.
Then U should delete particular data from DSO/Cubes.
Once data deleted from cube, then
Use Tcode RSRV -> Tests in Transaction RSRV -> All Elementary Tests -> Transaction Data -> Entries Not Used in the dimension of an InfoCube (Dbl Click)
From the right side window, expand u201CEntries Not Used in the Dimension of an InfoCubeu201D Node &
Enter InfoCube (like 0SD_C01), click u201CTransferu201D
Now, click u201CExecuteu201D (Toolbar)u2026 and the results displayed in the right side window..
Now, click u201CCorrect erroru201D (Toolbar)
Delecion of the master data

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Deleting the Master Data is not possible

hai
Im loaded the Master Data .
I want to delete the Master Data. So how can i delete ??
Im trying to delete Master Data by context menu of the Master InfoObject .But im unable to delete the master data .
I heard that it is big issue.
So what can i do for deleting the master data.
pls tell me
rizwan

hai all
Thanks for quick reply .
I deleted the data from InfoCube and ODS .
Im trying to delete the master data attribute data by context menu of master infoobject . But it is says that "Not all master data can be deleted".
I looked at the help from that message .It says that i need to go SLG1 transaction and then delete like that
But i dont have authorization for that transaction(SLG1).
So plese tell me what i ahve to do for deleting the master data .
txz
rizwan

Master Data Loaded but not able to see.

Loaded master data successfully. Able to see it in P and M table, but not able to see when going thru Manage - Contents at InfoProvider level.
Many requests are available showing number of records Transferred and Updated.
What could be the possible reason?

Hi Sarabjit,
Welcome to SDN!!
You need to load the transaction data into the Info-provider to see the contents and not just the master data.
In case you have done the transaction load then you need to do the "apply hier/attr change" for the master data loaded. Goto RSA1 -> Tools(menu) -> apply hier/attr change -> Seelect your info-object and execute.
Bye
Dinesh

How do we improve master data load performance

Hi Experts,
Could you please tell me how do we identify the master data load performance problem and what can be done to improve the master data load performance .
Thanks in Advance.
Nitya

Hi,
-Alpha conversion is defined at infoobject level for objects with data type CHAR.
A characteristic in SAP NetWeaver BI can use a conversion routine like the conversion routine called ALPHA. A conversion routine converts data that a user enters (in so called external format) to an internal format before it is stored on the data base.
The most important conversion routine - due to its common use - is the ALPHA routine that converts purely numeric user input like '4711' into '004711' (assuming that the characteristic value is 6 characters long). If a value is not purely numeric like '4711A' it is left unchanged.
We have found out that in customers systems there are quite often characteristics using a conversion routine like ALPHA that have values on the data base which are not in internal format, e.g. one might find '4711' instead of '004711' on the data base. It could even happen that there is also a value '04711', or ' 4711' (leading space).
This possibly results in data inconsistencies, also for query selection; i.e. if you select '4711', this is converted into '004711', so '04711' won't be selected.
-The check for referential integrity occurs for transaction data and master data if they are flexibly updated. You determine the valid InfoObject values.
- SID genaration is must for loading transaction data with respect to master data, to cal master data at bex level.
Regards,
rvc

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

BPC:: Master data load from BI Process chain

Hi,
we are trying to automatize the master data load from BI.
Now we are using a package with:
PROMPT(INFILES,,"Import file:",)
PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%TEMPNO2%,%INCREASENO%)
TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
But we need to include these tasks into a BI process chain.
How can we add the INFO statement into a process chain?
And how can we declare the variables?
Regards,
EZ.

Hi,
i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
\ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
How can we put this root???
Regards,
EZ.

Why can't PSE 9 find the file to load styles?

Why can't PSE 9 find the file to load styles

Use Task Manager to kill any running processes associated with PSE, then reboot.
Use Control Panel's Programs and Features to uninstall PSE.
The use Windows Explorer to delete any remaining PSE directories following these directions (change the names to version 10):
http://helpx.adobe.com/photoshop-elements/kb/manually-remove-photoshop-elements-9.html
Reboot.
Re-install PSE9.
Ken

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Unable to find the master data loaded request in manage tab

Similar Messages

Maybe you are looking for