Unable to find the ODS object while creating Multiprovider, Help

Hello Experts,
Iam facing problems while creating the MULTIPROVIDER.
I am unable to find the ODS in the list during initial selection of creation of Multiprovider. There are some ODS's which appear, while others don't.
Is there any selection on ODS that is preventing it from appearing in the list of ODS's.
Please help....Very Urgent

In ODS-change screen tick checkbox for 'BEx reporting' that appears under 'settings'.
then save and activate ODS..
after this the ODS will appear in the list while creating multiprovider.
cheers,
Vishvesh
Message was edited by: Vishvesh

Similar Messages

I am unable to use services for objects while creating a PO

Hi All,
I am unable to use services for objects while creating a PO ie in me21n / Me22n .
Our client wants to attach some doucument along with the PO, we want to use services for object for this. I use this services for objects in admin level , but unable to use this at user level.
System gives the following message
No service available
Message no. SGOS_MSG002
Regards
Gsg

Hi,
Refer the following OSS notes 552127, 598073
For getting Object for services icon in ME21N and ME51N refer OSS note 913251

"System: Unable to find the specified object" on N...

When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.

Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

System: unable to find the specified object.

I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advance

Hi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question..

Unable not find the monitoring object(idoc monitoring ) in BPmon

Hello Guys,
     As part configuration of IDOC monitoring in BPmon configuration ,while i am creating monitoring object for IDOC monitoring (solman_workcenter->Business process operations ->setup Business process monitoring -->selected the solution --> business scenarios -->
As mentioned above i could not able to find the IDOC monitoring template in the droup down list
Components level on manage system:-
ST-PI       2008_1_710 SP 08
ST-A/PI   01Q_731 SP2
I have done the load monitoring definition by selecting respective local component and clicked on load monitoring definitions
Please help me on resolving the issue.
Regards,
Pavan

Hello Calvin van der Walt,
Please upgrade ST-PI & ST-A/PI component to latest level.I resolved my issue by doing ST-PI & ST-A/PI component upgarde.
I had raised an OSS message eith SAP on this isssue and SAP has asked us for ST-PI & ST-A/PI component upgarde.
So please go with ST-PI & ST-A/PI component upgarde it will resolve your issue.
Regards,
Pavan

Use the authorization object while creating RFC

Hi All,
I'm able to create a RFC, can login from one sap system to another sap system and use the following FM. Here my concern is how to make the RFC more secure, i mean any user can access the target system with my login. Meanwhile came across a authorization object text box in the LOGON and SECURE tab while creating RFC.
so please put on light on how to authenticate the specific user to logon using the RFC.
Thanks in Advance.
Regards
Lalitkumar.

Hi Lalit,
Usually for RFC connection will be done with the, user type   system user type (means,they should not be able to login to system thru GUI)
2. Even if the user know the login id / password, he should have auth to create RFC like (SM59 and related auth objects)
and even for remote connection also we have different auth to restrict
3. These type of authorization will be given to basis guys only.
4. Logon/Security
             Lang-En
             Client-` client no
             user- user
             Password - bw password.
Here you will be specfying the user id ( system type) / password for connecting from one system to another.
and in next tab you can do Test connection.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a08fbe33-0501-0010-2d9c-fb37e9795fd9
Thanks,
Sri

Can't find the "done" button while creating a playlist?

I was listening to music while creating a playlist, and after adding some songs, I couldnt find the "done" button. Usually it's in the upper right corner, but there was only a "now playing" button. I searched around for another "done" button somewhere but could not find one. I turned my music off, but the "now playing" button was still there. Now my music app is stuck on the 'add music to playlist' screen. Has anyone ever had this problem? What should I do? Thanks.

I just had this happen to me too on my iPhone while I was adding music to a new playlist. If you power off your phone and restart it, the problem should correct itself.

Unable to find the sended message from create support message in solman.

Hello everybody,
I had installed the Solution manager and IDES server.
I have configure the Maintenance Optimizer, Now I am able to send the
support message from the IDES.
But Now where to find or serach the message in solution manager ?
or need to be configure service desk?
Please suggest me step by step configuration to check the sended message.
Thanks

hi
>
ganesh borase wrote:
> I have configure the Maintenance Optimizer, Now I am able to send the
> support message from the IDES.
> Thanks
sorry nt clear from your above statement, you configured maintenance optimzer for download supprot packages. do you want to configure support messages functiionality?
Can you please clarify your requirement?
Thanks,
Jansi

System: Unable to find the specified object on 950...

Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon

21-Apr-2006
04:02 PM
simonpindar wrote:
Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon
Hello
I have the same problem with my handset ,but I could not found the way that I can solve this problem ,I just wanna to know ,could you solve your problem ?is it possible you explain for me what did you do exactly?
thanks

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Unable to find the 'Panel Container 2' object

Hi,
I am unable to find the 'Panel Container 2' object under the containers folder of components. I am using xcelsius enterprise 2008.
I have a scenario where in which i need to use it, Is there any way I can get it into the canvas.
Thanks in advance,
Shreesh.

Hi,
Which Theme are you using now? Not all of the themes have "Panel Container 2" object. Theme "Aqua" and Theme "Nova" have "Panel Container 2", please try them.
Thanks,
Grace

Unable to find the workbook on server while accessing woekbook

I am opening in query in Bex analyzer
After getting the result , I am saving the file as workbook in favourites folder
It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
Please help

Hi,
I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
Thanks a lot.
BR.
Angela

Unable to find the User Named Account Name@Domain Name while Configuring Workflow Manager

Hi,
I have installed Work Flow Manager,Service Bus and its Cumulative Updates.
While Configuring Workflow Manger using Workflow Manager configuration wizard i am getting the error while creating a Service Bus Namespace.
I have provided the Service Accounts for both Workflow Manager and Service Bus as Domain\Account instead of
Account@Domain.
While looking in to the Power Shell scripts that are poupulated by the GUI i have identified that
Account@Domain is appended to the ManageUsers switch while creating a Service Bus Namespace and the GUI configuration is failing.
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account','Account@Domain' -Verbose;
So i need to modify the Powershell script as below and need to run the Powershell scripts for configuring Workflow Manager.
Is this a bug in GUI Workflow Configuration Wizard or am i doing something wrong.
Please help.
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account' -Verbose;
Scripts Populated from GUI modified for Making it working:
# To be run in Workflow Manager PowerShell console that has both Workflow Manager and Service Bus installed.
# Create new SB Farm
$SBCertificateAutoGenerationKey = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
New-SBFarm -SBFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=SbManagementDB;Integrated Security=True;Encrypt=False' -InternalPortRangeStart 9000 -TcpPort 9354 -MessageBrokerPort 9356 -RunAsAccount 'Domain\Account' -AdminGroup 'Domain\Domain
Group' -GatewayDBConnectionString 'Data Source=Server Name;Initial Catalog=SbGatewayDatabase;Integrated Security=True;Encrypt=False' -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -MessageContainerDBConnectionString 'Data Source=Server Name;Initial
Catalog=SBMessageContainer01;Integrated Security=True;Encrypt=False' -Verbose;
# To be run in Workflow Manager PowerShell console that has both Workflow Manager and Service Bus installed.
# Create new WF Farm
$WFCertAutoGenerationKey = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
New-WFFarm -WFFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=WFManagementDB;Integrated Security=True;Encrypt=False' -RunAsAccount 'Domain\Account' -AdminGroup 'Domain\Domain Group' -HttpsPort 12290 -HttpPort 12291 -InstanceDBConnectionString
'Data Source=Server Name;Initial Catalog=WFInstanceManagementDB;Integrated Security=True;Encrypt=False' -ResourceDBConnectionString 'Data Source=Server Name;Initial Catalog=WFResourceManagementDB;Integrated Security=True;Encrypt=False' -CertificateAutoGenerationKey
$WFCertAutoGenerationKey -Verbose;
# Add SB Host
$SBRunAsPassword = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
Add-SBHost -SBFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=SbManagementDB;Integrated Security=True;Encrypt=False' -RunAsPassword $SBRunAsPassword -EnableFirewallRules $true -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -Verbose;
Try
    # Create new SB Namespace
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account' -Verbose;
    Start-Sleep -s 90
Catch [system.InvalidOperationException]
# Get SB Client Configuration
$SBClientConfiguration = Get-SBClientConfiguration -Namespaces 'WorkflowDefaultNamespace' -Verbose;
# Add WF Host
$WFRunAsPassword = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
Add-WFHost -WFFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=WFManagementDB;Integrated Security=True;Encrypt=False' -RunAsPassword $WFRunAsPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -EnableHttpPort
-CertificateAutoGenerationKey $WFCertAutoGenerationKey -Verbose;
Thanks, Vijay Arockiasamy

Hi Vijay
uninstall this and install the one labeled Refresh 1
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Unable to find the ODS object while creating Multiprovider, Help

Similar Messages

Maybe you are looking for