Unable to find the printer HP F4580
I have Windows Vista and the HP F 4580
Right now the printer is connected to the computer with an USB-cable. The computer is connected to a wirless network.
I have triede several times to change the printer connection to a wireless connection, but evertime The setup says it can't find the printer, though it is in the list. I've also tried the "wireless" button, but it is not working.
My printer does not have a big screen, so I can't try it with the contol panel on the printer.
Please help me.
Print a Wireless Network Test from the front of the printer. It will self-test the wireless radio - it may be defective.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
HP Software finds the printer, but then "the printer was unable to be installed over the network"
I have tried to search for a similar issue, but haven't had any success yet. I doubt I'm the first with this problem!
The computer is XP SP3, the printer is Deskjet 3050A, and it's a WPA-PSK WiFi.
The printer confirms that it is connected to the WiFi.
When I run the setup tool on the computer, at the Network Check point, the setup software finds the printer at the correct IP address. It is the only thing it discovers.
I click next, ànd after a minute or two, I get the error "the printer was unable to be installed over the wireless network" Click Retry to try installing the printer over the network again, or click Cancel to return to the connection options.
This just cycles with no progress. I have turned off the Windows Firewall and also disabled the AV. No change.
I can browse to the web interface of the printer - but still can't install the printer. It is listed in the Printers and Faxes as being Offline.
I'll try once again removing it, and re-adding it - but has anyone come across this problem before, please?
This question was solved.
View Solution.I am having a similar problem as well. The printer is recognized (most of the time) when I run the HP Network DIagnostic Utility. However, when I run the Add a Device setup program to install my wireless printer, it is NEVER recognized. I have even tried to use the advvanced serach to locate it using the IP listed in the Diagnostic Utility without any luck. As an aside, I was able to add the printer through windows just fine and am currently able to print to it, but would really like to add it using the HP installation so that I can configure the "scan to" settings again.
To make matters worse, I no longer have the USB cord that came with the printer because the device has been connected wirelessly for over a year now with minimal issues. Any help getting this brick back online and connected to my network would be much appreciated! -
Unable to find the published output for this request - problem
Hi ,
In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
Unable to find the published output for this request.
No output file exist for the request
and if i see the log file i get this message :
Arguments
P_INVOICE_ID='10243'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
+/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
XENVIRONMENT is set to /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_ALBANIA.UTF8
+' '+
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
+(c) Copyright 1999 Oracle Corporation. All rights reserved.+
The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
PS: i am using ebs 11.5 version
Thanks in advance,
Best regardsHi,
REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
Regards,
Hussein -
Photoshop CS5 is unable to find the JavaScript plug-in.
I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in." It does this with an action that was designed for me to put the filename, copyright symbol, and studio name on 4x5 proofs. It also comes up when I try to use the keyboard shortcut Ctrl/Shift/W to close a file and go to bridge. There have been some other batch operations that will not load.
I have downloaded Java; trashed the Preferences in Photoshop and Bridge; and also uninstalled and re-installed CS5 and none of this has worked. Any ideas of what to do next?
Bob BrantAdobe Photoshop uses its own Javascript plugin not an external third party javescript. Its a required Plugin ScriptingSupport:
ScriptingSupport 15.1
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 32908 MB
Memory available to Photoshop: 37134 MB
Memory used by Photoshop: 94 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro 4000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.4052"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro 4000/PCIe/SSE2"
glgpu[0].GLRendererID=1757
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20140702000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro 4000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="340.52"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="6.5.12"
clgpu[0].CLBandwidth=7.49299e+010
clgpu[0].CLCompute=184.366
License Type: Subscription
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 175.6G free
C:\, 224.2G, 105.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.1
Plugin.dll Adobe Photoshop CC 2014 15.1
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.1
PSViews.dll Adobe Photoshop CC 2014 15.1
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.1 (2014.1.0 x001)
Accented Edges 15.1
Adaptive Wide Angle 15.1
Angled Strokes 15.1
Average 15.1 (2014.1.0 x001)
Bas Relief 15.1
BMP 15.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.1
Charcoal 15.1
Chrome 15.1
Cineon 15.1 (2014.1.0 x001)
Clouds 15.1 (2014.1.0 x001)
Collada 15.1 (2014.1.0 x001)
Color Halftone 15.1
Colored Pencil 15.1
CompuServe GIF 15.1
Conté Crayon 15.1
Craquelure 15.1
Crop and Straighten Photos 15.1 (2014.1.0 x001)
Crop and Straighten Photos Filter 15.1
Crosshatch 15.1
Crystallize 15.1
Cutout 15.1
Dark Strokes 15.1
De-Interlace 15.1
Dicom 15.1
Difference Clouds 15.1 (2014.1.0 x001)
Diffuse Glow 15.1
Displace 15.1
Dry Brush 15.1
Eazel Acquire 15.1 (2014.1.0 x001)
Embed Watermark 4.0
Entropy 15.1 (2014.1.0 x001)
Export Color Lookup NO VERSION
Extrude 15.1
FastCore Routines 15.1 (2014.1.0 x001)
Fibers 15.1
Film Grain 15.1
Filter Gallery 15.1
Flash 3D 15.1 (2014.1.0 x001)
Fresco 15.1
Glass 15.1
Glowing Edges 15.1
Google Earth 4 15.1 (2014.1.0 x001)
Grain 15.1
Graphic Pen 15.1
Halftone Pattern 15.1
HDRMergeUI 15.1
IFF Format 15.1
IGES 15.1 (2014.1.0 x001)
Ink Outlines 15.1
JPEG 2000 15.1
Kurtosis 15.1 (2014.1.0 x001)
Lens Blur 15.1
Lens Correction 15.1
Lens Flare 15.1
Liquify 15.1
Matlab Operation 15.1 (2014.1.0 x001)
Maximum 15.1 (2014.1.0 x001)
Mean 15.1 (2014.1.0 x001)
Measurement Core 15.1 (2014.1.0 x001)
Median 15.1 (2014.1.0 x001)
Mezzotint 15.1
Minimum 15.1 (2014.1.0 x001)
MMXCore Routines 15.1 (2014.1.0 x001)
Mosaic Tiles 15.1
Multiprocessor Support 15.1 (2014.1.0 x001)
Neon Glow 15.1
Note Paper 15.1
NTSC Colors 15.1 (2014.1.0 x001)
Ocean Ripple 15.1
OpenEXR 15.1
Paint Daubs 15.1
Palette Knife 15.1
Patchwork 15.1
Paths to Illustrator 15.1
PCX 15.1 (2014.1.0 x001)
Photocopy 15.1
Photoshop 3D Engine 15.1 (2014.1.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.1 (2014.1.0 x001)
Pinch 15.1
Pixar 15.1 (2014.1.0 x001)
Plaster 15.1
Plastic Wrap 15.1
PLY 15.1 (2014.1.0 x001)
PNG 15.1
Pointillize 15.1
Polar Coordinates 15.1
Portable Bit Map 15.1 (2014.1.0 x001)
Poster Edges 15.1
Radial Blur 15.1
Radiance 15.1 (2014.1.0 x001)
Range 15.1 (2014.1.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.1
Ripple 15.1
Rough Pastels 15.1
Save for Web 15.1
ScriptingSupport 15.1 <---------------------------------------------------------------------------------------- -----------------------------------------------------------------------------
Shake Reduction 15.1
Shear 15.1
Skewness 15.1 (2014.1.0 x001)
Smart Blur 15.1
Smudge Stick 15.1
Solarize 15.1 (2014.1.0 x001)
Spatter 15.1
Spherize 15.1
Sponge 15.1
Sprayed Strokes 15.1
Stained Glass 15.1
Stamp 15.1
Standard Deviation 15.1 (2014.1.0 x001)
STL 15.1 (2014.1.0 x001)
Sumi-e 15.1
Summation 15.1 (2014.1.0 x001)
Targa 15.1
Texturizer 15.1
Tiles 15.1
Torn Edges 15.1
Twirl 15.1
U3D 15.1 (2014.1.0 x001)
Underpainting 15.1
Vanishing Point 15.1
Variance 15.1 (2014.1.0 x001)
Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
Water Paper 15.1
Watercolor 15.1
Wave 15.1
Wavefront|OBJ 15.1 (2014.1.0 x001)
WIA Support 15.1 (2014.1.0 x001)
Wind 15.1
Wireless Bitmap 15.1 (2014.1.0 x001)
ZigZag 15.1
Optional and third party plug-ins:
CUR (Windows Cursor) NO VERSION
GREYCstoration NO VERSION
ICO (Windows Icon) NO VERSION
Reduce Noise 7.0.0.0
ScriptListener 13.0
StarFilter Pro 3 3.0.5.1
SuperPNG 2.0
Plug-ins that failed to load: NONE
Flash:
Adobe Kuler
Installed TWAIN devices: NONE -
Unable to get the print option in network for Services
Hi Experts
I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference
Thanks in Advance
AmbarishHi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna -
Getting error "Unable to find the published output for this request"
1. Created a Data Template
2. Created a Data Definition using the above Data Template
3. Created a RTF template and registered the same in XML Publisher Administrator
4. Created Concurrent program for the data template using 'XDODTEXE' as executable
5. Ran the above concurrent program and it completed successfully.
6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
7. I can see the XML output in the $APPLCSF/out directory.
8. Also the short name for concurrent program and data definition code and template code are same.
I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
Am I missing something here. Can anyone come across this issue.
I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
ThanksI tried again after applying XDO 5.6.2. I am still not able to see the output.
Here is the logfile info. There is no mention of OPP or PUBLISH section:
XDO Data Engine ver 1.0
Resp: 21540
Org ID : 101
Request ID: 348042
All Parameters: p_batch_id=7169
Data Template Code: AUDRPT
Data Template Application Short Name: XXCUST
Debug Flag: Y
{p_batch_id=7169}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 348042
Number of copies : 0
Printer : noprint
Finished executing request completion options. -
Unable to verify the printer on the network
Hi,
I have a home IP network with an HP4100N network laser-printer connected via JetDirect card to a powerline device and then to a hub.
Up until recently, all computers on my network could successfully print to the printer via the JetDirect card and IP (192.168.0.100).
HOWEVER, my girlfriends MacBook Pro running Mac OX 10.9.5 suddenly stopped printing to the printer and things were just starting to build up in the print queue. The printer continues to print normally for everyone else on Mac and even a Windows 7 machine, eeek!
Turning the printer on and off a couple of times, resetting the network etc, I then finally deleted the print queue and tried to setup a new connection to the printer again on her computer via the prefs and the IP JetDirect socket option (like I have done on all the other computers).
When I enter the printer IP address into the Mac Printer & Scanners settings, Mac OS tried to interrogate printer model etc and it comes back with a Generic Postscript Printer profile and not the HP specific one. (Again, every other computer can setup fine at this point!)
On her computer, when you try and install the printer with the wrong profile (or even the correct one if manually chosen), it eventually says:
'Unable to verify the printer on your network'.
Network utility:
I then tried using the Network Utility to ping the printer from my laptop, this works.
I tried to ping the printer from her computer, this doesn't work and it times out!
then...
I tried pinging her MBP from my MBP and this works. Then I pinged my MBP from her MBP, this works.
So her computer is on the network, but is not able to see the printer.
I then hard- IP'd a new IP address on the printer (just to rule this out), setup all the computers to this new printer, all worked well except for her computer, which once again couldn't see the printer. (I can't ping to it either again from her computer, even with the new IP!)
I think I've tried all the obvious things, updating software, resetting things, turning the firewall off completely....but all to no avail.
The problem, it seems to me, is with her MBP rather than with the network or the printer (as all other computers can print!).
So...the million dollar question is... Can anyone tell me what is going on?! How do I get her computer to print to this printer again??
thanks very much.Yeah, I would agree with you completely Greg, but the baffling thing is it just affects this one Mac. How come it routes 'selectively' so to speak? It works for everyone (incl. Windows 7 machine) but not for my GF's MBP... until such a time that it suddenly feels like working again (all by itself by the looks of things).
You are right in saying that it defo appears to be some kind of routing problem, but I'm having difficulty in finding out where the problem actually is. Is it the router, the printer or her computer? Could it be the firewall on the router blocking it for her and not for others for some reason? If it was the router, you would expect it to tarnish everyone with the same brush, would you not?
Whilst the HP printer has the static IP manually set up on that side (192.168.0.100), the router hasn't specifically been told that the printer has the .0.100 address hard coded into it I don't think, so there is a possibility for it to be going weird here. I'll need to look at the router config page tonight and just lock that 0.100 address to the MAC HW of the printer. Perhaps that will do the trick, but still wouldn't explain why it's doing it selectively just to that one computer (not even randomly to others on the network).
I did try the safe boot too. Within that I ran Disk Utility to fix some file permission errors (there were some group permission problems for the new HP software that I had installed on her computer actually, which DU had fixed). Whilst running the utility, it did throw back issues about the EFI partition map being corrupted etc, but that seems to be a separate problem with the disk utility software not being able to run/fix from the disk it is being booted from, even in safe mode. But this is being discussed elsewhere on Apple Forums and I don't think it's connected to the IP problem I'm having.
Whilst I was doing the Safe Boot thing, I got sidetracked (isn't that always the case when you troubleshoot) and didn't try and set the printer up within that environment, but instead was trying to figure out why I was getting the EFI partition Map errors. It turned into a late night and I had to hit the sack at some point...
I tried IPP too. Putting the Printers IP into the address field on her computer didn't result in the HP Printer profile being selected when it tried to find the printer, this stayed as Generic PostScript. I didn't explore any further on that occasion to see if I could manually set it all up and print to it or if the set-up would just hang again. I figured if the IP address of the printer isn't visible to the computer (ie. no route to host), then changing to IPP wouldn't work either.
I'll give these options another go tonight when I get my hands on her computer again. -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either.
As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.ApplePearApple wrote:
Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
From AirPrint Basics:
AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
AirPrint printers connected by Ethernet are supported in OS X.
You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work. -
I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?
Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.
-
Unable to find the data source in r/3 ECC 6.0 - ( 0FI_GL_10 ) in RSA5
Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
GuptaHi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK -
Unable to find the content of data source into infosource
Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M. -
Unable to find the Workbook named......
Helle All,
I am getting the following error when I call a Discoverer report from a URL link.
"Unable to find the Workbook named:ASSIGNEDPROJECTTEAMRPT
Select a valid Workbook from the list below."
When I get this error the worksheet called "ASSIGNEDPROJECTTEAMRPT" is in the list below. I am wondering why it says the worksheet doesn't exist then gives it to me a list?
Any ideas?
Thanks for any help,
BradleyWhoops that would be "Hello All"
Bradley -
Unable to find the Workbook named:REN_SUM1
Unable to find the Workbook named:REN_SUM1 Portal error
I am getting this error when i click the link in portal screen. The link should display a discoverer report. I am displaying the discoverer reports from portal.
Unable to find the Workbook named:REN_SUMMARY21
Select a valid Workbook from the list below.
However it provides a list of workbooks and from there i am able to select.Whoops that would be "Hello All"
Bradley -
Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1? I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer. But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago. Suggestions??
Here is the list of AirPrint printers, and you particular printer is not on it. So that means you will need to use the Lexmark app, and print through your computer.
There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
http://support.apple.com/kb/ht4356
Maybe you are looking for
-
i did have my most visited sites in the pin ups yet for some reason or other not sure why but not when i open a new tab all there is, is one big blank white page. Not a toggle switch not even blank pin up thumb nails. Any help would be greatly apprec
-
Hp laserjet pro 200 color MFP M276n not printing PDF documents
Hello I am having problems printing PDF documents from our hp laserjet pro 200 color MFP M276n. I get a blank sheet of paper and a message on the printer saying 49 service error - turn off then on I can print word/excel documents. Many thanks Karen
-
Problem with Customer Interaction Module in Web Channel Builder
Hello Everyone, Facing an issue with Web Channel Builder Customer Interaction Module. In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
-
Diff materialized view and view
what is diff materialized view and view
-
Merging Cells in Report Designer
Hi, according to SAP Documentation http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/6b9b41aa6ca309e10000000a155106/frameset.htm it shall be possible to merge cells within Report Designer. However I have tried it on several ways but was never able t