Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

Similar Messages

Internal error: Unable to find the access rule.

I have a Cisco ASA 5550 and using ASDM 6.2.
Opening the ASDM, in Firewall Dashboard, in Top 10 Access Rules, show the second rule with more hit: "interface X | source: any | Dest: any | Service: ip | Action: Permit.
During the day, the hits increase and decrease.
Well, the problem: That rule there isn't.
When I click with the right mouse button and click on show rule, a message is displayed:
"Internal error: Unable to find the access rule."
I can't find the rule in Configuration Mode and in Console Mode.
Well, the rule there isn't.
What can I do for this rule disappears from the Top 10 Dashboard?

I suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Failure while activating the transfer rules

Hi,
While activating the transfer rules, in that process when the system is trying to activating the transfer structure an error is occuring.
Following is the error log.
FREELISTS 004
FREELIST GROUPS 01)
PARTITION BY RANGE (PARTNO)
PARTITION "/BIC/B00077630000000000002" VALUES LESS THAN
(0000000002))
ORA-00604: error occurred at recursive SQL level 1 ORA-01654: unable to extend index SYS.I_CON1 by 1
DDL time(___1): .......167 milliseconds
The SQL statement was not executed
Table /BIC/B0007763000 (Error adjusting the database)
Table /BIC/B0007763000 was not activated
Obj_act >>(___1): ..00:00:01 hh:mm:ss
Following is the log from System Log(SM21) for the same
BY2 Database error 604 at EXE
BY0 > ORA-00604: error occurred at recursive SQL level 1#ORA-01654
BY0 > unable to extend index SYS.I_CON1 by 1065 in tablespace SYST
BY2 Database error 604 at EXE
Every time when I try to activate the transfer rules, it generates a new table "/BIC/B000xxxxxxx".
Let me know if any more details required.
Though there is a SAP Notes(513758) with Symptom which is same as our problem, its of not much use. It only says search for other SAP Notes with KeyWords from error log. We couldn't find a relavant SAP Notes sofar.
Please guide us in resolving the issue.

Hi Aswani,
To further prevent this from occuring, you should assign a BASIS person to monitor the BW system using tcode DB02 and watch out for critical objects prior loading process. That way, this error could have been prevented.
You can also device a way to predict which table spaces are needed to adjusted on a scheduled basis based on your actual data growth.
--Jkyle

Unable to find the content of data source into infosource

Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?

after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M.

Unable to find the report in the manifest resources. Please build the project, and try again.

The error is received when i transfer the .exe file, bin\Debug folder to another machine:
Unable to find the report in the manifest resources. Please build the project, and try again.
The error is issued when i try to open the form that contain the Crystal report viewer, I already checked the properties of the report file and it says "Embed Resource" in the "Build Action"
This error is not visible on my development machine where visual studio is installed, anybody know what i should install on the other machine for this to run.
I'm using C#, WinForms, .net 2.0, VS 2005.

Fronde Systems Group:
Setting the build action to Embedded resource is working
in my local machine which has Visual studio 2003 installed. But when i deploy the same on Server
(server has no .net framework installed on it), it keeps failing. I get the the following error:
"ERROR Thrown from Crystal Reports ===> An undocumented error occured" which is triggered when it is Unable
to find the report in the manifest resources.
Please suggest me guys....
Thanks
Ravi
[email protected]

How to knw the Transfer rules of Infosource 80PUR_O01?

In AWP,
In Metadata Repository,
Taking an example,
"Vendor Evalution-0PUR_C02" Infocube we get Update rules at the bottom of the page,
from Update rules page, in the bottom of tht page we get Infosource,
Now in this Infosource page we get 'Transfer Rules'.
this is the normal procedure i suppose to find 'Transfer Rules'.
Similarly im trying out for "Purchasing Order Qty Service Level-0PUR_C07",
but im not able to get the 'Transfer Rules for ths Cube.
Please let me know the Procedure, how to find out Transfer rules for this "PO Qty Service level" Infocube................?
Regards,
Sourav

the best place to search the content objects is HELP.SAP.COM
InfoSources
2LIS_02_ITM Purchasing Data (Document Item Level) as of 2.0B
2LIS_02_SCN Allocation Schedule Line with Confirmation
2LIS_02_CGR Allocation Confirmation with Goods Receipt
2LIS_02_SGR Allocation Schedule Line with Goods Receipt
http://help.sap.com/saphelp_bw33/helpdata/en/c4/1478c35bda7b4cb5224251c84ffaa2/frameset.htm

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Debug the transfer Rule

Hi,
Please let me know how to but the break point in the Transfer Rule to debug it
Regards,
Mayank

Hi Mayank,
You can simulate debugging in transfer rules or update rules if you have used a PSA.
To simulate debuggin with selective records, load your data target via PSA.
Load the info package till PSA.
In the Details tab, in the monitor of your infopackage/scheduler---> in the details tab-->drill down the messages until you start seeing data package.
When you right click on the message Proceesing of Data package1/2/...n, you will find an option to simulate debug.If you select this option it opens a new window where you could mentione---> activate the debugger in the transfer rule or activate the debugger in the update rule...
Please refer to the SAP help link below for further details or clarification.
[ Debugging transfer rules|http://help.sap.com/saphelp_nw04/helpdata/en/5c/37e03ba722cb5ae10000000a114084/frameset.htm]
In DTP, there is one specific processing mode for debugging and you could switch the debugger at particular break points by checking the relevant checkbox.
Hope this helps,
Best regards,
Sunmit.

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

Unable to find the data source in r/3 ECC 6.0 - ( 0FI_GL_10 ) in RSA5

Hi guys,
I am unable to find the data source(0FI_GL_10) in RSA5.
Presently I am using BI7.0 version with R/3 ECC 6.0.
BI Patch level - 16.
BI content Patch level - 8
Thanks,
Gupta

Hi,
Try Installing Application Component Hierarchies
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/c30a0e9c44204eb596c6353c827d2e/frameset.htm
Use RSA9 for this.
Hope this helps.
Thanks,
JituK

Unable to find the Workbook named......

Helle All,
I am getting the following error when I call a Discoverer report from a URL link.
"Unable to find the Workbook named:ASSIGNEDPROJECTTEAMRPT
Select a valid Workbook from the list below."
When I get this error the worksheet called "ASSIGNEDPROJECTTEAMRPT" is in the list below. I am wondering why it says the worksheet doesn't exist then gives it to me a list?
Any ideas?
Thanks for any help,
Bradley

Whoops that would be "Hello All"
Bradley

Unable to find the Workbook named:REN_SUM1

Unable to find the Workbook named:REN_SUM1 Portal error
I am getting this error when i click the link in portal screen. The link should display a discoverer report. I am displaying the discoverer reports from portal.
Unable to find the Workbook named:REN_SUMMARY21
Select a valid Workbook from the list below.
However it provides a list of workbooks and from there i am able to select.

Whoops that would be "Hello All"
Bradley

Unable to find the Transfer Rules in Transport Connection

Similar Messages

Maybe you are looking for