Unable to find Unique Entry in Table ADR2 for BP Mobile No

Hello All,
I need to fetch the details of the mobile no of the business partner
In the table but021_fs I pass the Bp no and I get the adddress number
I pass the address no along with the field sms enabled in the table ADR2, the system is giving me two values.

Hello Atul,
Sorry for chiming in, but I'd like to make a small correction: table BUT021_FS will show you address-dependent communication data only. So both telephone numbers are address dependent. According to me the situation you're facing is the following:
1) BP n°320041 is an organization
2) This organization has an address with telephone number xxx
3) This organization has also a relationship to a contact person (to find the BP number of this contact person you can search table BUT000-PERSNUMBER = '12351')
4) Within this relationship, the same telephone number xxx is used.
What does that mean?
The same telephone number is used for different purposes (to contact both the organization, and the contact person within the organization). So you'd better ask one functional consultant within your company which one is better.
Regards,
Nicolas.

Similar Messages

  • Cound not find any entry in table EDP12 for a partner provided in IDOC data

    Hi All,
    I have an inbound IDOC for a purchase order.
    If a put a query to the table EDP12 for the partner  or message type (ORDERS) provided in the IDOC data, I do not get any entry for this.
    Could you please enlighten me on this...
    Thanks,
    Sanjeet

    Hi Gautham,
    Even if I go to T-Code SE11 or SE12 in production or quality system and try to see the contents of this view, one message pops up saying "You do not have authorization for T-code SM30".
    And in DEV system, I get a message saying "No database view exists for view VEDI_TDP21".
    Anyway my current question is : In T-code WE42, there are two process codes for message type ORDERS:
    1. ORDE                                            (ORDERS           Create sales order)
    2. ORDE_BY_WORKFLOW                (ORDERS           Sales Order withtext in workflow)
    How can I confirm one process code out of the above two for the message type ORDERS?
    Regards,
    Sanjeet

  • Unable to find an entry point named 'imaqCreat​eImage' in DLL ...

    Firstly some background:
    Using Microsoft's managed extensibility framework (MEF), I've created a "Test Tool" framework which accepts plugins. The plugins are generally HW drivers with UIs. I created a NI Vision plugin  which does camera discovery, acquisition and image processing. All functionality is exposed via a UI and public methods. The  "Test Tool" framework shows the plugin UIs in docking panels (same VS docking panels) and provides a scripting interface for the plugin's public methods. 
    Ok, now the problem:
    At runtime for the "Test Tool" framework and plugin I get "Unable to find an entry point named 'imaqCreateImage' in DLL ...". After a quick debug: the exception is thrown when instantiating the Imageviewer control in NI Vision plugin UI.
    I created a plugin test environment which simply references the plugin and adds the plugin's UI to a form. This works correctly at runtime.
    In addition, if I remove the  Imageviewer controls from the plugin, it works correctly at runtime in the "Test Tool" framework.

    Have you tried ensuring that the DLL function is actually being exported? You might check out some other forums as this problem has more to do with calling our DLL than the DLL its self. I've found a few other instances of this issue on external forums but I couldn't find any internal resources as you're doing something outside the scope of the intended functionality.
    http://stackoverflow.com/questions/653178/unable-t​o-find-an-entry-point-named-function-in-dll-c-to-c​...
    http://stackoverflow.com/questions/13882304/unable​-to-find-an-entry-point-named
    Rob B
    FlexRIO Product Manager

  • Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dl

    .NET 2 (c#) Standalone application is failed to run on clean computer with subj
    application compiled on VisualStudio 2005
    installed Software:
    .NET 2 redistribution
    ODAC10202Beta.exe
    The same application built with VS 2003 .NET 1 and installed ODAC101040.exe
    works fine.
    Thanks for any advice.

    I tried the suggestion above using the MS GAC tool and I still have the problem so I am looking for any other suggestions or thoughts as to what could be wrong:
    gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.9.2.Oracle.DataAccess.dll"
    gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.1.Oracle.DataAccess.dll"
    gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.2.Oracle.DataAccess.dll"
    gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\1.x\Oracle.DataAccess.dll"
    gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\2.x\Oracle.DataAccess.dll"
    I used gacutil.exe out of "C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin" and each insert said it was successful.
    The specific error I am getting in VS2008 with SP1 is: _getContextXml:Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dll' in a .NET 2.x project.
    I used dependency walker and looked at both OraOps10.dll (version 1.102.2.20) and OraOps10w.dll (version 2.102.2.20) and the function OpsPrmAllocValCtx isn't in either one of them. I looked at other users machines who aren't having this problem and they have the same Oracle DLLs from the same install that I do too so I am scratching my head trying to figure out what is wrong here and would appreciate any help - and thanks in advance.

  • ERROR "Unable to find an entry point named OCIEnvCreate in DLL"

    Hi, I´am developing an ASP.net app, I have worked with asp.net and oracle before, but in this time im getting this error: "Unable to find an entry point named OCIEnvCreate in DLL" the oracle91 folder has read priveleges, I have installed ODP.net, and I keep getting this error, what can I do. Im using framework 1.1. thxs

    The "Authenticated Users" group should have "Read & Execute" on the %ORACLE_HOME% folder and below. Can you verify if this is the case?
    - Mark
    ===================================================
    Mark A. Williams
    Oracle DBA
    Author, Professional .NET Oracle Programming
    http://www.apress.com/book/bookDisplay.html?bID=378

  • IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

    Hi,
    I have configure  allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
    Regards
    Subhedar B.

    table t510
    MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART  ENDDA      BEGDA      BETRG
    100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
    100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
    t511
    MANDT    100
    MOLGA    IQ
    LGART    1019
    ENDDA    31.12.9999
    BEGDA    01.01.1992
    ABTYZ       1
    WKTYZ     11
    OPKEN
    ZEINH    030
    KOMBI    2
    BTMIN    0
    BTMAX    0
    ADSUM    X
    MODNA    TARIF
    MODSP
    RUTYP
    RUDIV    0
    ADDJN
    MOD01    1
    MOD02
    MOD03    A
    ANMIN    0.00
    ANMAX    0.00
    V_511_B
    Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
    EE Subgroup grouping   Personal subarea
    0  1  2  3  4  5  6  7  8  9     0  1  2  3  4  5  6  7  8  9
              1                          1  1

  • Problem with No entry in table T591B for 0015 08 E101

    Hi all,
    This is our first year using SAP and we're approaching our first Year End and so want to make the E Wage Types available for us in IT0015, E121 is already OK and I can enter data in IT0015 for that WT no problem. I've added WT E101 to the 0015 Additional Payments in the IMG and it shows as being allowed for IT0015, this has created entries in the Permissability, etc. in the IMG and I've updated permisability for the ESG to allow for all ESG / PS, etc. - so all looks fine when I work through the steps for Additional Payments in the IMG, but when I try to save E101 in IT0015 I get a message about 'No entry in table T591B for 0015 08 E101' .
    When I look at this table it's called 'WT dependent retroactive accounting trigger' and I've not seen it before despite setting up many Wage Types and I can see E121 is in this table but E101 isn't - but I can't see how I can add or copy anything in this table - there are no options. So I'm assuming this is usually auto updated by creating an entry in another table but I have no idea how to find where and can't find any documentation or other forum messages for this table.
    Has anyone else come accross this before or know anything about this table - has anyone else had trouble when wanting to allow E Wage Types to be used for Year End adjustments?
    Thanks in advance for any advice anyone can give me
    Nyree

    Olnly wt configured to be permissibled on a few infotypes (e.g. 0014, 0015, 0267) would need to be configured in V_T591B. The purpose of this is to control whether these wt are allowed to be changed after payroll is already run for the ee.
    All you need to do is maintain this entry through view V_T591B - add entry for wt 'E101'  for infotype 0015 / country '08'. The indicator (V5591B-ABWRU) can be '' (allow change to wt after proll is run), 'X' (warning if change after proll is run), 'E' (hard-error if change after payroll is run) .
    Rgds.

  • No entry in table T503 for "D"

    Hello Experts,
    while trying to hire an employee on the IDES server, the message "No entry in table T503 for (EEgroup) " ... i checked the T503 table (T503K, and V_T503Z via TCode SM30) ... and found my EE groups and subgroups !! (as assigned through IMG) ... but still I get the same error message and i don't know why.
    FYI : I was told that the IDES server is not configurable !! that is , I may not find the expected results that i make on IMG (I may create EEgroups and subgroups, assign them, but still I may not find them as expected!!)
    Note:
      when I choose an employee group (while hiring) and then i try to select EE subgroups, the status bar says that "No Values Found" though i had assigned EEsubgroups to the EEgroups!!
    please tell me what is going on, i am really confused !!
    Thanks in advance.

    Hi,
    1. Create the Emp Group if required through SM30 table T501. If not atleast check your EG.
    2. Create the ESG if required thorugh SM30 table T503K. If already created check your ESG here.
    3. For the combination of your EG and ESG make sure that country 99 (other countries) is ticked in V_T503Z via SM30.
    4. Maintain the Employee attributes in V_503_C via SM30
    In case if your EG or ESG is 01 then make sure that it is ZERO ONE and not O(letter) ONE.
    hope this helps.
    Ajay

  • No entry in table T001P for key - PT60

    Hi Folks,
    I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
    The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
    In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
    Thanks for any help.
    (rewarded with points)

    HI,
    Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
    If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
    Regards,

  • No entry in table T71ADM10 for key 'X'

    Hello,
    While uploading data from R/3, I get this error message:
    'No entry in table T71ADM10 for key "X"'
    But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
    Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
    Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
    Please advice.
    Thanks & Regards,
    Labanya.

    Hello Labanya,
    As  you telling data is available  in PSA . So  there is need to do update from fro PSA. So Just select that request number  goto RSA1--> PSA. Then find your Request number. Check whether  it has with red mark. Then right click on mouse and select  "start the update immediately". And check  whether you are getting same error or not.
    Thanks,
    Abha

  • No entry in table T527X for E

    Hi,
    The HR IDOCs are ending in error in our production system with the error:
    No entry in table T527X for E
    Message no. RP301
    Diagnosis
    The entry values must be stored in table T527X. The "   E" value(s) are not in this table.
    When the IDOC is reprocessed manually or by the standard program, the IDOC has OK status.
    The error just started from today and we do not know as to what is causing this error.
    I have checked in the FM that is processing the IDOC and I could not find nay reference to the table T527X or that message number.
    Can anyone please help?
    Regards,
    Archana

    The IDOC is being processed by a custom Function module but this program was modified
    and the changes were moved to the system last week.
    If IDOC was getting processes Successfully till last week, Customization done recently is the Culprit
    I am thinking about the complexity of the Standard Function (which almost processes all
    types of HR master data and how developer must have managed to write Custom code for all of this.
    Quite Complex I think.
    The main change was that in some updation BDC is now used to update the screens
    directly and then PA41 tcode is being called. Do you think this might cause the issue?
    But then it works in reprocessing - strange.
    In some places, the standard function module is used (code not changed for this) -HR_MASTER_MAINTAIN -
    (i think).
    Well what all I can say is track the error message while running the IDOC for first time and
    that will only give you the solution.
    Regards
    Shital

  • No entry in table T582A for 171

    Hi Friendz,
    When I executed Idoc, system is throwing message No entry in table T582A for 171. I checked in T582A and T777D (attribute/characteristics ) tables infotype is available.
    Please advice to rectify this issue asap.
    Thanks in advance,
    $Lakshmi
    Edited by: Narayana on Feb 20, 2010 3:16 AM

    Hi Sujit,Pradeep,ERP12345
    Issue resolved...
    I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
    But my question is why after copying it is throwing this error? i cant find any logic
    sorry I cant give any forum points because its already resolved...
    But anybody can tell the logic then i will definitely give the points.
    Thanks in advance...

  • No entry in table T549Q for key 01 at 20120131

    Hi Experts,
    I am getting this error "No entry in table T549Q for key 01 at 20120131". On running time evaluation.I have generated payroll period frm 1999 to 2020.employee hire date is
    1.1.2012.runnig TE for first month upto 31.1.2012.control record set to correction in 1.1.2012-31.1.2012(11th payroll period of
    2011).this error is not at all going.
    Help is appreciated...
    Thanks in advance

    Hi Sujit,Pradeep,ERP12345
    Issue resolved...
    I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
    But my question is why after copying it is throwing this error? i cant find any logic
    sorry I cant give any forum points because its already resolved...
    But anybody can tell the logic then i will definitely give the points.
    Thanks in advance...

  • System error -no entry in table T093 for the chart of depreciation or ccode

    When checking “Depreciation Areas of Company Codes” in overview for experts (transaction SPRO) I first get a warning message “inconsistent rounding entries were corrected”.
    After saving once in the maintenance transaction (as recommended in the help text) I get the following system error: “there is no entry in table T093 for the chart of depreciation or company code”. I checked table T093 and all entries are in there!
    What else I have to correct?
    Regards
    Cordula Speh

    hi ,
    yours is customizing problem only, check all steps once again in customizing. T093 is initial customizing for asset accounting. just go through below things and check based on this order all customizing.
    1.     Copy Reference Chart of Accounts Depreciation / Depreciation Areas.
    2.     Specify Description of Chart of Depreciation (COD).
    3.     Copy / Delete Depreciation Areas.
    4.     Creation of  ‘0’ Tax Codes for Non-Taxable Transaction.
    5.     Assign Tax Codes for Non-Taxable Transactions.
    6.     Assign COD to Company Code.
    7.     Specify Account Determination.
    8.     Create Screen Layout Rules.
    9.     Define Number Intervals.
    check one by one and if you find anything missedout do it, i think max you prblm solve, if not give some more details about your problem.
    thanks and regards
    vk.

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

Maybe you are looking for