Unable to find Withdraw Action in E-SEperation
Hi Gurus,
I have created a E-Seperation request (Initiated by Employee) and would like to withdraw the request by him. But, i find only Put-On-Hold action in the menu bar and no other actions found.
Even, Put-On-Hold is not permitted for the status Initiated.
Please suggest. I could not find a table or feature which suggest permissable actions for each status.
Thanks in Advance,
Sadhu
You posted this in the Lightroom forum. You're more likely to get help if you repost in the Photoshop forum.
Similar Messages
-
Photoshop CS5 is unable to find the JavaScript plug-in.
I have been trying to run a number of actions in CS5 (Windows 7) and keep getting the error "Could not complete the command because Photoshop was unable to find the JavaScript plug-in." It does this with an action that was designed for me to put the filename, copyright symbol, and studio name on 4x5 proofs. It also comes up when I try to use the keyboard shortcut Ctrl/Shift/W to close a file and go to bridge. There have been some other batch operations that will not load.
I have downloaded Java; trashed the Preferences in Photoshop and Bridge; and also uninstalled and re-installed CS5 and none of this has worked. Any ideas of what to do next?
Bob BrantAdobe Photoshop uses its own Javascript plugin not an external third party javescript. Its a required Plugin ScriptingSupport:
ScriptingSupport 15.1
Adobe Photoshop Version: 2014.1.0 20140730.r.148 2014/07/30:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:13, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 1995 MHz
Built-in memory: 40886 MB
Free memory: 32908 MB
Memory available to Photoshop: 37134 MB
Memory used by Photoshop: 94 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Huge
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=-1360, bottom=768, right=0
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="Quadro 4000/PCIe/SSE2"
glgpu[0].GLVendor="NVIDIA Corporation"
glgpu[0].GLVendorID=4318
glgpu[0].GLDriverVersion="9.18.13.4052"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="Quadro 4000/PCIe/SSE2"
glgpu[0].GLRendererID=1757
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um"
glgpu[0].GLDriverDate="20140702000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40 NVIDIA via Cg compiler"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[6553 6]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[4]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[124]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.1"
clgpu[0].CLDeviceVersion="1.1 CUDA"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Quadro 4000"
clgpu[0].CLVendor="NVIDIA Corporation"
clgpu[0].CLVendorID=4318
clgpu[0].CLDriverVersion="340.52"
clgpu[0].CUDASupported=1
clgpu[0].CUDAVersion="6.5.12"
clgpu[0].CLBandwidth=7.49299e+010
clgpu[0].CLCompute=184.366
License Type: Subscription
Serial number: 96040035116912554961
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\JOHNJM~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 465.2G, 175.6G free
C:\, 224.2G, 105.7G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/04/14-23:42:44 79.554120 79.554120
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/04/23-10:46:55 79.554276 79.554276
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 2014/03/05-14:49:37 5.0.33 79.552883
AdobePDFL.dll PDFL 2014/03/04-00:39:42 79.510482 79.510482
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPFiles.dll Adobe XMP Files 2014/01/13-19:44:00 79.155772 79.155772
AdobeXMPScript.dll Adobe XMP Script 2014/01/13-19:44:00 79.155772 79.155772
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/04/14-23:42:44 79.554120 79.554120
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.91 BuildVersion: 8.0; BuildDate: Tue May 27 2014 22:3:7) 1.000000
ARE.dll ARE 2014/04/14-23:42:44 79.554120 79.554120
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/04/14-23:42:44 79.554120 79.554120
BIBUtils.dll BIBUtils 2014/04/14-23:42:44 79.554120 79.554120
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/04/14-23:42:44 79.554120 79.554120
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.145
JP2KLib.dll JP2KLib 2014/03/12-08:53:44 79.252744 79.252744
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/03/25-23:41:34 79.553444 79.553444
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.1
Plugin.dll Adobe Photoshop CC 2014 15.1
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.0.0.74
PSArt.dll Adobe Photoshop CC 2014 15.1
PSViews.dll Adobe Photoshop CC 2014 15.1
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.1 (2014.1.0 x001)
Accented Edges 15.1
Adaptive Wide Angle 15.1
Angled Strokes 15.1
Average 15.1 (2014.1.0 x001)
Bas Relief 15.1
BMP 15.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chalk & Charcoal 15.1
Charcoal 15.1
Chrome 15.1
Cineon 15.1 (2014.1.0 x001)
Clouds 15.1 (2014.1.0 x001)
Collada 15.1 (2014.1.0 x001)
Color Halftone 15.1
Colored Pencil 15.1
CompuServe GIF 15.1
Conté Crayon 15.1
Craquelure 15.1
Crop and Straighten Photos 15.1 (2014.1.0 x001)
Crop and Straighten Photos Filter 15.1
Crosshatch 15.1
Crystallize 15.1
Cutout 15.1
Dark Strokes 15.1
De-Interlace 15.1
Dicom 15.1
Difference Clouds 15.1 (2014.1.0 x001)
Diffuse Glow 15.1
Displace 15.1
Dry Brush 15.1
Eazel Acquire 15.1 (2014.1.0 x001)
Embed Watermark 4.0
Entropy 15.1 (2014.1.0 x001)
Export Color Lookup NO VERSION
Extrude 15.1
FastCore Routines 15.1 (2014.1.0 x001)
Fibers 15.1
Film Grain 15.1
Filter Gallery 15.1
Flash 3D 15.1 (2014.1.0 x001)
Fresco 15.1
Glass 15.1
Glowing Edges 15.1
Google Earth 4 15.1 (2014.1.0 x001)
Grain 15.1
Graphic Pen 15.1
Halftone Pattern 15.1
HDRMergeUI 15.1
IFF Format 15.1
IGES 15.1 (2014.1.0 x001)
Ink Outlines 15.1
JPEG 2000 15.1
Kurtosis 15.1 (2014.1.0 x001)
Lens Blur 15.1
Lens Correction 15.1
Lens Flare 15.1
Liquify 15.1
Matlab Operation 15.1 (2014.1.0 x001)
Maximum 15.1 (2014.1.0 x001)
Mean 15.1 (2014.1.0 x001)
Measurement Core 15.1 (2014.1.0 x001)
Median 15.1 (2014.1.0 x001)
Mezzotint 15.1
Minimum 15.1 (2014.1.0 x001)
MMXCore Routines 15.1 (2014.1.0 x001)
Mosaic Tiles 15.1
Multiprocessor Support 15.1 (2014.1.0 x001)
Neon Glow 15.1
Note Paper 15.1
NTSC Colors 15.1 (2014.1.0 x001)
Ocean Ripple 15.1
OpenEXR 15.1
Paint Daubs 15.1
Palette Knife 15.1
Patchwork 15.1
Paths to Illustrator 15.1
PCX 15.1 (2014.1.0 x001)
Photocopy 15.1
Photoshop 3D Engine 15.1 (2014.1.0 x001)
Photoshop Touch 14.0
Picture Package Filter 15.1 (2014.1.0 x001)
Pinch 15.1
Pixar 15.1 (2014.1.0 x001)
Plaster 15.1
Plastic Wrap 15.1
PLY 15.1 (2014.1.0 x001)
PNG 15.1
Pointillize 15.1
Polar Coordinates 15.1
Portable Bit Map 15.1 (2014.1.0 x001)
Poster Edges 15.1
Radial Blur 15.1
Radiance 15.1 (2014.1.0 x001)
Range 15.1 (2014.1.0 x001)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.1
Ripple 15.1
Rough Pastels 15.1
Save for Web 15.1
ScriptingSupport 15.1 <---------------------------------------------------------------------------------------- -----------------------------------------------------------------------------
Shake Reduction 15.1
Shear 15.1
Skewness 15.1 (2014.1.0 x001)
Smart Blur 15.1
Smudge Stick 15.1
Solarize 15.1 (2014.1.0 x001)
Spatter 15.1
Spherize 15.1
Sponge 15.1
Sprayed Strokes 15.1
Stained Glass 15.1
Stamp 15.1
Standard Deviation 15.1 (2014.1.0 x001)
STL 15.1 (2014.1.0 x001)
Sumi-e 15.1
Summation 15.1 (2014.1.0 x001)
Targa 15.1
Texturizer 15.1
Tiles 15.1
Torn Edges 15.1
Twirl 15.1
U3D 15.1 (2014.1.0 x001)
Underpainting 15.1
Vanishing Point 15.1
Variance 15.1 (2014.1.0 x001)
Virtual Reality Modeling Language | VRML 15.1 (2014.1.0 x001)
Water Paper 15.1
Watercolor 15.1
Wave 15.1
Wavefront|OBJ 15.1 (2014.1.0 x001)
WIA Support 15.1 (2014.1.0 x001)
Wind 15.1
Wireless Bitmap 15.1 (2014.1.0 x001)
ZigZag 15.1
Optional and third party plug-ins:
CUR (Windows Cursor) NO VERSION
GREYCstoration NO VERSION
ICO (Windows Icon) NO VERSION
Reduce Noise 7.0.0.0
ScriptListener 13.0
StarFilter Pro 3 3.0.5.1
SuperPNG 2.0
Plug-ins that failed to load: NONE
Flash:
Adobe Kuler
Installed TWAIN devices: NONE -
Unable to find consolidate field in Time off Process application
Hi All,
I create an aplllication for Time off process and unable to find "consolidate" field when selecting set up block parameters .I am using portals EP 7.0 Version
Could you please help me in getting this ...
Thanks ,
Nararaju.Hi,
we group parameters so that the output of process actions is automatically entered as input .We can consolidate parameter at Action,block adn process levels
follow the below steps
1. Select your Seq Block and click on the tab "Parameters" at the bottom pane
2. Mark all the parameter (press ctrl for multiple ) and Click on Map
3. Supply the Name and say create
at last do a SavaAll
hope this will solve ur problem
cheers
souza -
Problem "Unable to find resource" in SAP PI 7.0 Sp12
Hi Experts - We are experiencing below problem in SAP PI 7.0 SP 12.
Objects are available in the system and cache notifications are green. Even after multiple attemps messages are not processing.
Is there any resolution action we can take? Details below.
THanks, Mathias.
<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Dynamic Receiver Determination via Mapping.</Trace>
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 721735504F3735BB885E49DD430ACFB0</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 4E0CDFA06AAB11DBBE41EACA91374078</Trace>
<Trace level="1" type="T">Interface Mapping http://eu.Company.com/SC/Mak/Pack/ProdRec/xi NAME_WMTORD_TO_SAP_BASIS_Receivers</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPSXX ) ( http://sap.com/xi/XI/System/IDoc SNDPRN SXXCLNT010 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR XXXCLNT010 ) ( http://sap.com/xi/XI/System/IDoc RCVPRN X1295_LWHA ) ( http://sap.com/xi/XI/System/IDoc RCVPRT LS ) ( http://sap.com/xi/XI/System/IDoc MESTYP WMTORD ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WMTOID01 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_.</Trace>
<Trace level="3" type="T">Load 4e0cdfa0-6aab-11db-be41-eaca91374078, http://eu.Company.com/SC/Mak/Pack/ProdRec/xi, -1, com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_.class (http://eu.Company.com/SC/Mak/Pack/ProdRec/xi, -1) in swcv 4e0cdfa0-6aab-11db-be41-eaca91374078.</Trace>
<Trace level="3" type="T">Does not found exact entry. Search in other namspaces.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_.class (-1) in swcv 4e0cdfa0-6aab-11db-be41-eaca91374078 without namespace.</Trace>
<Trace level="1" type="T">Class not found: com.sap.xi.tf._NAME_WMTORD_TO_SAP_BASIS_Receivers_</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.persist.ResourceNotFoundException: Unable to find resource com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_.class (http://eu.Company.com/SC/Mak/Pack/ProdRec/xi, 4e0cdfa0-6aab-11db-be41-eaca91374078, -1) at com.sap.aii.ibrun.server.mapping.persist.DBSwcvMappingPersistor.getInputStream(DBSwcvMappingPersistor.java:325) at com.sap.aii.ibrun.server.mapping.persist.DBSwcvMappingPersistor.readFile(DBSwcvMappingPersistor.java:203) at com.sap.aii.ibrun.server.mapping.persist.DBSwcvMappingPersistor.readClass(DBSwcvMappingPersistor.java:195) at com.sap.aii.ibrun.server.mapping.MappingLoader.findClass(MappingLoader.java:138) at java.lang.ClassLoader.loadClass(ClassLoader.java:627) at java.lang.ClassLoader.loadClass(ClassLoader.java:593) at com.sap.aii.ibrun.server.mapping.JavaMapping.load(JavaMapping.java:95) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:45) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor329.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy252.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor328.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:275) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:217) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7803) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8164) at com.sap.mw.jco.JCO$Server.work(JCO.java:8284) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8231) at com.sap.mw.jco.JCO$Server.run(JCO.java:8147) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:219) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
<Trace level="1" type="T">java.lang.ClassNotFoundException at JavaMapping.load(): Could not load class: com/sap/xi/tf/_NAME_WMTORD_TO_SAP_BASIS_Receivers_</Trace>Hi - We have executed the re-transport which resolved the situation described above.
However we have not been able to fully close the topic and understand the root cause.
Our current understanding is as follows:
At the time of a transport activation, a cache notification is created and the information is transmitted from the Integration Directory to the different caches using user XIDIRUSER. After the successful notification, the cache update is triggered. This is initiated by the IE ABAP Runtime via user XIISUSER. This user is calling the Integration Directory which than takes user XIDIRUSER to retrieve the required objects, e.g. message mappings, from the Integration Repository. If at this stage, the user XIDIRUSER does not receive an available Work-Process, the action is not completed. This means also the cache notification stays green, as the negative feedback cannot be transmitted either, since the user XIDIRUSER 'died out'.
This was confirmed to happen in an overload situation for our system.
Please comment if you have any further experiences or different explanation.
Mathias -
Unable to find the report in the manifest resources
<p>Hi!</p><p>I have problem using Crystal Report documents created in Visual Studio 2005 using the build-in version of Crystal Reports. If I create a project from scratch with one report and then some code to initialize and export the report to disk I get the following error message:</p><p>"Unhandled Exception: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Unable to find the report in the manifest resources. Please build the project, and try again."</p><p>I have tried using both the "Embedded resource" and the "Content" options during build, but with no luck at all. When using the Content option I explicitly load the rpt-file but no luck at all. Do anyone have a clue to what the problem is? I have absolutely no idea. The things worked in Visual Studio 2003 but not in 2005. What is the manifest resource?</p><p>Would really appreciate some help, thanks in advance!</p><p>My source code is below.</p><p>Best regards<br />Lars</p>class Program {<br /><font size="1"><font color="#0000ff"> public</font> <font color="#0000ff">static</font> <font color="#008080">TableLogOnInfo</font> CreateConnectionInfo(<font color="#0000ff">string</font> userID, <font color="#0000ff">string</font> password, <font color="#0000ff">string</font> serverName, <font color="#0000ff">string</font> databaseName) {<br /> <font color="#008080">TableLogOnInfo</font> conInfo = <font color="#0000ff">new</font> <font color="#008080">TableLogOnInfo</font>();<br /> conInfo.ConnectionInfo.UserID = userID;<br /> conInfo.ConnectionInfo.Password = password;<br /> conInfo.ConnectionInfo.ServerName = serverName;<br /> conInfo.ConnectionInfo.DatabaseName = databaseName;<br /><font color="#0000ff"> return</font> conInfo;<br /> }<br /><br /></font><font color="#0000ff"><font size="1"><font color="#0000ff"> public</font> <font color="#0000ff">static</font> <font color="#008080">ReportClass</font> CreatePersonalWillReport(<font color="#008080">TableLogOnInfo</font> conInfo, </font><font size="1"><font color="#0000ff">string</font> personID) {<br /> </font><font size="1"><font color="#008080">ReportClass</font> doc = <font color="#0000ff">new</font> <font color="#008080">ReportClass</font>();<br /> </font><font size="1">doc.Load(<font color="#800000">@"C:\Utveckling\reports\main\ClassLibrary1\bin\Debug\CrystalReport1.rpt"</font>);<br /> </font><font size="1"><font color="#008080">List</font><<font color="#008080">ReportParameter</font>> parameters = <font color="#0000ff">new</font> <font color="#008080">List</font><<font color="#008080">ReportParameter</font>>();<br /> </font><font size="1">parameters.Add(<font color="#0000ff">new</font> <font color="#008080">ReportParameter</font>(<font color="#800000">"@personID"</font>, personID));<br /> </font><font size="1"><font color="#0000ff">return</font> ApplyReportParameters(doc, parameters, conInfo);<br /> }</font></font><font color="#0000ff"> <p> </p><p><font size="1"><font color="#0000ff"> public</font> <font color="#0000ff">static</font> <font color="#0000ff">void</font> ExportReportToDisk(<font color="#0000ff">string</font> fileName, </font><font size="1"><font color="#008080">ReportClass</font> report, </font><font size="1"><font color="#008080">ExportFormatType</font> formatType) {<br /> </font><font size="1">report.ExportToDisk(formatType, fileName);<br /> </font><font size="1">}</font></p><p><font size="1"><font color="#0000ff"> protected</font> <font color="#0000ff">static</font> <font color="#008080">ReportClass</font> ApplyReportParameters(<font color="#008080">ReportClass</font> report, <font color="#008080">List</font><<font color="#008080">ReportParameter</font>> paramList, </font><font size="1"><font color="#008080">TableLogOnInfo</font> conInfo) {<br /> </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">Table</font> t <font color="#0000ff">in</font> report.Database.Tables) {<br /> </font><font size="1">t.ApplyLogOnInfo(conInfo);<br /> </font><font size="1">}</font></p><p><font size="1"> <font color="#0000ff">foreach</font> (<font color="#008080">Section</font> s <font color="#0000ff">in</font> report.ReportDefinition.Sections) {<br /> </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ReportObject</font> ro <font color="#0000ff">in</font> s.ReportObjects) {<br /> </font><font size="1"><font color="#0000ff">if</font> (ro.Kind == CrystalDecisions.Shared.<font color="#008080">ReportObjectKind</font>.SubreportObject) { <br /></font><font size="1"><font color="#008080"> SubreportObject</font> sro = (<font color="#008080">SubreportObject</font>)ro;<br /> </font><font size="1"><font color="#008080">ReportDocument</font> doc = sro.OpenSubreport(sro.SubreportName);</font></p><p><font size="1"><font color="#0000ff"> foreach</font> (<font color="#008080">Table</font> t <font color="#0000ff">in</font> doc.Database.Tables) {<br /> </font><font size="1">t.ApplyLogOnInfo(conInfo);</font></p><p><font size="1"> }<br /> </font><font size="1">}<br /> </font><font size="1">}<br /> </font><font size="1">}<br /><br /> </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ParameterFieldDefinition</font> paramField <font color="#0000ff">in</font> report.DataDefinition.ParameterFields) {<br /> </font><font size="1"><font color="#0000ff">foreach</font> (<font color="#008080">ReportParameter</font> rp <font color="#0000ff">in</font> paramList) {<br /> </font><font size="1"><font color="#0000ff">if</font> (paramField.Name == rp.Name) {<br /> </font><font size="1"><font color="#008080">ParameterValues</font> pv = paramField.CurrentValues;<br /> </font><font size="1"><font color="#0000ff">string</font> s = (<font color="#0000ff">string</font>)rp.Value.Value;<br /> </font><font size="1"><font color="#008080">ParameterDiscreteValue</font> pdv = <font color="#0000ff">new</font> <font color="#008080">ParameterDiscreteValue</font>();<br /> </font><font size="1">pdv.Value = s;<br /> </font><font size="1">pv.Add(pdv);<br /> </font><font size="1">paramField.ApplyCurrentValues(pv);<br /> </font><font size="1">}<br /> </font><font size="1">}<br /> </font><font size="1">}</font></p><p><font size="1"><font color="#0000ff"> return</font> report;</font></p><p><font size="1"> }</font></p><p> </p><p><font size="1"><font color="#0000ff"> static</font> <font color="#0000ff">void</font> Main(<font color="#0000ff">string</font>[] args) {<br /> </font><font size="1"><font color="#008080">TableLogOnInfo</font> conInfo = CreateConnectionInfo(<font color="#800000">"username"</font>, <font color="#800000">"password"</font>,<br /> </font><font size="1"><font color="#800000">"server"</font>, <font color="#800000">"database"</font>);<br /> </font><font size="1"><font color="#008080">ReportClass</font> report = CreatePersonalWillReport(conInfo, <font color="#800000">"-1291000956"</font>);<br /> </font><font size="1">ExportReportToDisk(<font color="#800000">"C:\temp\report.pdf"</font>, report, <font color="#008080">ExportFormatType</font>.PortableDocFormat);<br /> </font><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> Helper class that contains parameter key/value pairs.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">protected</font> <font color="#0000ff">class</font> <font color="#008080">ReportParameter</font> {</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter name.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">private</font> <font color="#0000ff">string</font> name = <font color="#0000ff">null</font>;</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter value.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">private</font> <font color="#008080">ParameterDiscreteValue</font> value = <font color="#0000ff">new</font> <font color="#008080">ParameterDiscreteValue</font>();</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter name.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">public</font> <font color="#0000ff">string</font> Name {</font></p><p><font size="1"><font
color="#0000ff">get</font> {</font></p><p><font size="1"><font color="#0000ff">return</font> <font color="#0000ff">this</font>.name;</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#0000ff">set</font> {</font></p><p><font size="1"><font color="#0000ff">this</font>.name = <font color="#0000ff">value</font>;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The parameter value.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#0000ff">public</font> <font color="#008080">ParameterDiscreteValue</font> Value {</font></p><p><font size="1"><font color="#0000ff">get</font> {</font></p><p><font size="1"><font color="#0000ff">return</font> <font color="#0000ff">this</font>.value;</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#0000ff">set</font> {</font></p><p><font size="1"><font color="#0000ff">this</font>.value = <font color="#0000ff">value</font>;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> The constructor.</font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"></summary></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><param name="name"></font><font color="#008000">the parameter name</font><font color="#808080"></param></font></font></p><p><font size="1"><font color="#808080">///</font><font color="#008000"> </font><font color="#808080"><param name="value"></font><font color="#008000">the parameter value</font><font color="#808080"></param></font></font></p><p><font size="1"><font color="#0000ff">public</font> ReportParameter(<font color="#0000ff">string</font> name, <font color="#0000ff">object</font> value) {</font></p><p><font size="1"><font color="#0000ff">this</font>.name = name;</font></p><p><font size="1"><font color="#0000ff">this</font>.value.Value = value;</font></p><p><font size="1">}</font></p><p><font size="1">}</font></p></font>Lars,
 Have you read the CRnet_deployment.doc if not it may help fix your problem (It didnt mine but hey you may be lucky) See http://support.businessobjects.com/communitycs/technicalpapers/crnet_deployment.pdf
I have a similar issue but in 2003.net using the bundled CR package. I'm trying to use CR in a Web Service called from a Compact Framework device. I've confirmed I'm using the correct Merge Modules & my Build Actions are all set as stated in the CR Application Deployment document but it still spits out Unable to find the report in the manifest resources
I've looked extensively on the net and while others have had this problem the only advice I've seen revolves around embedded build actions and using the correct merge modules. There must be something else causing this problem and some one who has found a way round it?!?
If your that someone please take 5 minutes out and help a couple of guys in distress?
Thanks in advance,
Ian -
The error is received when i transfer the .exe file, bin\Debug folder to another machine:
Unable to find the report in the manifest resources. Please build the project, and try again.
The error is issued when i try to open the form that contain the Crystal report viewer, I already checked the properties of the report file and it says "Embed Resource" in the "Build Action"
This error is not visible on my development machine where visual studio is installed, anybody know what i should install on the other machine for this to run.
I'm using C#, WinForms, .net 2.0, VS 2005.Fronde Systems Group:
Setting the build action to Embedded resource is working
in my local machine which has Visual studio 2003 installed. But when i deploy the same on Server
(server has no .net framework installed on it), it keeps failing. I get the the following error:
"ERROR Thrown from Crystal Reports ===> An undocumented error occured" which is triggered when it is Unable
to find the report in the manifest resources.
Please suggest me guys....
Thanks
Ravi
[email protected] -
GRC 10 Upgrade: Unable to find a system while creating a request in AC
Hi All,
I am unable to find a system while creating a new request in Access Management. I have created a connector to the backend system and I tested that by logging into the system remotely. However, the same system is not available for selection for which the request needs to be created.
Please suggest.
Regards,
FaisalHi Faisal,
Please re-visit the following config:
SPRO>GRC>AC-->Maintain Connector Settings
SPRO>GRC>AC-->Maintain Mapping for Actions and Connector Groups
SPRO>GRC>AC-->Maintain Plugin Settings (Make sure you have not checked the checkbox)
Still not solved - please follow this document and make sure you have completed all the steps:
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/5067e447-5c64-2e10-7d9c-8f7e5953aadb
Regards,
Ajesh. -
I'm testing the waters prior to upgrading a customer application from APEX 3.0.0.00.20 to 4.0.2.00.07.
The application has been exported from the APEX 3.0 environment on a 4.0 instance on a different server. Both databases are 10.2.0.4.0 EE.
A on navigating—via a standard tab—to a page containing only conditional On Load: Before Header branches, the branches are failing with
Unexpected error, unable to find item name at application or page level.
Error: ERR-1002 Unable to find item ID for item "p810_status" in application "121". This is caused by the branch action having Set these items item names specified in lower case:
p810_status,p810_read_onlyThe error is resolved by changing these item names to UPPER CASE.
This is not a disaster. Using APEX views I can see that there are only a handful of branches specifying item names in lower case so it won't require major effort to fix this app when it's upgraded for real.
However, (a) I am aware that there are other places in this app where item names are specified in lower case; and (b) I tend to type most of my development stuff in lower case, so I'd like clarification on this issue.
<li>Is this a known issue? (Can't find any earlier mention of this on OTN, MOS or web)
<li>Is this expected behaviour in APEX 4.x or a bug?
<li>If a bug is it fixed in 4.1?
<li>Is there a change in APEX 4.0 requiring branch item (and other?) references to be uppercase? If so, where is this documented?
I notice that it works OK when the same item values are specified in the URL using lowercase item names.
Bumped by: fac586 on 08-Mar-2012 15:51
I noticed that APEX 4.0.2 has converted all branches to use the [now] late, lamented "Set value before branching" option. Is this significant? Obviously this won't occur if upgrading to 4.1.
Edited by: fac586 on 12-Mar-2012 15:14Hi Lukx,
Thank you for reporting this. You have hit upon an issue with this page, for which I have filed Oracle bug #11840642. To get around this in the meantime, you can see page specific changes by going to:
1) The 'Page Definition' page for the page you want to see recent edits.
2) Go to 'Utilities > History'. This will show you recent actions for components on the current page.
Hope that helps and thanks again for catching this.
Regards,
Anthony. -
ERR-1002 Unable to find item ID on app 4000
Hi,
I wish have my last changes made on a page
under
Utilities>change history>Recently Edited Pages
i get this error
Unexpected error, unable to find item name at application or page level.
ERR-1002 Unable to find item ID for item "P358_PAGE_ID" in application "4000".
Return to application.
Any Help?
Thanks in advance
lukx
so win xp
rdbms 10.2.0.4
Application Express 4.0.2.00.07Hi Lukx,
Thank you for reporting this. You have hit upon an issue with this page, for which I have filed Oracle bug #11840642. To get around this in the meantime, you can see page specific changes by going to:
1) The 'Page Definition' page for the page you want to see recent edits.
2) Go to 'Utilities > History'. This will show you recent actions for components on the current page.
Hope that helps and thanks again for catching this.
Regards,
Anthony. -
I've been developing an AIR application for Android and iOS. During development, I've run the application (in debug mode) in the desktop simulator as well as on an iPhone 4 and a Nook Tablet.
However, I recently tried to "Export Release Build" for iOS and hit the following error: (I've stripped out the package and class information in the error message below)
!ENTRY com.adobe.flexbuilder.project 4 43 2012-04-06 13:09:15.516
!MESSAGE Error occurred while packaging the application:
Exception in thread "main" java.lang.Error: Unable to find named traits: valid.package.path.here::ValidClassName
at adobe.abc.Domain.resolveTypeName(Domain.java:231)
at adobe.abc.Domain.resolveTypeName(Domain.java:148)
at adobe.abc.GlobalOptimizer.sccp_eval(GlobalOptimizer.java:6665)
at adobe.abc.GlobalOptimizer.sccp_analyze(GlobalOptimizer.java:5909)
at adobe.abc.GlobalOptimizer.sccp(GlobalOptimizer.java:4628)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:3514)
at adobe.abc.GlobalOptimizer.optimize(GlobalOptimizer.java:2215)
at adobe.abc.LLVMEmitter.optimizeABCs(LLVMEmitter.java:526)
at adobe.abc.LLVMEmitter.generateBitcode(LLVMEmitter.java:336)
at com.adobe.air.ipa.AOTCompiler.convertAbcToLlvmBitcodeImpl(AOTCompiler.java:472)
at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82)
Compilation failed while executing : ADT
!STACK 0
java.lang.Exception
at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.doPackage (ExportReleaseVersionWizard.java:283)
at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard.performFi nish(ExportReleaseVersionWizard.java:152)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:827)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:432)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:240)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction$1.run(Export ReleaseVersionAction.java:97)
at com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionAction.run(ExportRe leaseVersionAction.java:103)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionI tem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java :411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
The class the error message is referring to is defined with a SWC that my project links to. However, I've even tried to define a class with that same name (and location) within my project and it still fails to find it.
Why am I able to Project->Clean and run this project within the desktop AIR player (or on the device in debug mode) but unable to export it as a release build?
I have found a couple of threads mentioning a similar error but none of them have been marked as resolved.At this point I feel I am talking to myself, but I will share my work-around in case it helps another who may stumble across this post.
In my particular case, both my main AIR application and my ANE wrapper library were referencing the same external Flex library (same revision). Both projects had the library linkage set to merge. Changing the linkage to "External" on one of the 2 libraries (it doesn't seem to matter which) and leaving the other as "Merged into code" enabled the export to complete without the bizarre "Unable to find named traits" error. -
CRVS2010 Beta - Unable to find the report in the manifest resources
I upgraded to VS2010 Beta where we soon encountered this error.
Unable to find the report in the manifest resources. Please build the project, and try again.
at CrystalDecisions.CrystalReports.Engine.EngineExceptionUtils.DoThrowException(String message, EngineExceptionErrorID id)
at CrystalDecisions.CrystalReports.Engine.ExceptionThrower.ThrowEngineException(String messageID, EngineExceptionErrorID id)
at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(IEnumerable enumerable)
Searching the forums I saw some similar issues. Here is how the issue was solved on my end.
Looking at the properties of the crystal report file in VS2010 the Build Action was "None". After setting it compile things worked as normal. The exception made sense after finding the cause.
I'm not sure if this was caused by VS2010 as my organization was in the middle of migrating to TFS 2010 that may have caused an issue.
Hope this helps someone.Cliff, thank you very much for sharing this soution with the community. Once CRVS2010 RTMs, I'll create a KBase on it.
Happy coding,
Ludek -
Unable to find matching navigation case from view ID. Error 404
Hi All,
I basically wanted to jumpstart my ADF exploration so I am following the tutorial at this link. [http://www.oracle.com/technetwork/developer-tools/jdev/ccset22-all-099343.html]
Everything looks good but when I click the Edit Button, I am encountering an error. What I did was I change the logging mechanism into a FINER in my WLS and from the logs,
it prints below messages.
<NavigationHandlerImpl> <getViewId> "JSF1013: Unable to find matching navigation case from view ID '/orders-flow/editOrders' for outcome 'save' and action 'save'
<ViewHandlerImpl> <executePageToBuildView> About to execute view /orders-flow/editOrders
<ViewHandlerImpl> <executePageToBuildView> Before dispacthMessage to viewId /orders-flow/editOrders
<ViewHandlerImpl> <executePageToBuildView> After dispacthMessage to viewId /orders-flow/editOrdersI checked out the taskflow and it is basically calling a task-flow-return component.
I followed everything but I cant make this example work... Any idea why? I checked out the DB and I notice that it has commited my Edit Transaction but I am getting a 404 on my page. Please help. Thanks.Hi Frank,
I think I got the save control flow case.
Can you help me check please if I miss something? I uploaded my project at this link. [http://www.4shared.com/file/QFcofTfj/BrowseEditApp.html]
I am quite not sure if I miss something but I have done this project twice already but got the same result.
Thanks
Edited by: Marky on 13.4.2011 5:59 -
"Unable to find channel ID" error.
Hello experts,
We are building an IDOC->XI->JMS scenario.
Sending the IDOC gets it into the XI and it is visible inside the SXMB_MONI. Looking at a trace level 3 on the trace section of the message you can see that all pipeline activities are performed as normal.
The last action of the Outbound Binding is successful and the correct Communication channel name (from the Receiver Agreement) is displayed in the trace - meaning was selected.
Looking in the RWB on the details of the message show that:
- message was received from http://xiserver:50000/MessagingSystem/receive/AFW/XI
- The message goes in and out of the receive queue.
- the message status set to DLNG
- Unable to find channel ID.
- ... error stuff..
This Channel ID error is the one who causes us trouble.
Looking at the same place for a PROXY->XI->JMS scenario shows that the correct channel is selected. this channel is the channel in the receiver determination - the name only exists there so it doesn't relate to any other channel (like MQ channel).
Could really use help finding this problem source or activating J2EE traces the could point to what's wrong.
Thank's - Yoad.Hi,
One thing which could be wrong is the cache. Try in the IB:Directory to see if all things have been succesfully committed to the CPA.
Then try to refresh the CPA cache. http://xiserver:50000/CPACache/refresh?mode=full (Login as XIDIRUSER)
If you are on SP 12, you could use NW administrator on http://xiserver:50000/nwa -> select Monitoring -> Logs and traces and in the blank dropdownbox select Default trace.
Hope this helps -
[Help] Unable to find component with absolute reference
I've deployed my project files to server and registered in Application.
Class Files under myclasses goes to -> /disk2/app/applmgr/comntop/java/ldc/oracle/apps/sla/calnet/xref/phone
Page XML under myprojects goes to -> /disk2/app/applmgr/appltop/xx_custom/11.5.0/mds
The page is rendered successfully.
(In EBS, HTML Call registered in FUNCTION is OA.jsp?page=/ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG)
However, if I click any "action" such as <apply>, <delete>.. etc, I get "Unable to find component with absolute reference" error.
I've verified -> exec JDR_UTILS.printDocument('/ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG', 150), and it did fetch the XML code.
I've verified I restart Apache as well as deleting out pages -> rm -rf $COMMONTOP/_pages
What am I missing here? Please help.
xmlimport.bat
REM Setting Up JDeveloper Path
set JDEV_BIN_HOME=C:\JDev9i_OAExtend_RUP7\jdevbin
set JDEV_USER_HOME=C:\JDev9i_OAExtend_RUP7\jdevhome\jdev
set JDEV_PROJECT_HOME=%JDEV_USER_HOME%\myprojects
REM Location of the import file
set PATH=%JDEV_BIN_HOME%\jdk\bin;%JDEV_BIN_HOME%\jdev\bin;%PATH%
REM Setting up DB Connection Path
set DB_CONNECTION="(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = arebdt.xxx.com)(PORT = 1521))(CONNECT_DATA = (SID = ARTEST)))"
REM Setting up Page(s) to upload
set PAGE2UPLOAD=ldc\oracle\apps\sla\calnet\xref\phone\webui\PhonePG.xml
set APPS_PASSWD=<pass>
REM Execute import.bat
call import.bat %JDEV_PROJECT_HOME%\%PAGE2UPLOAD% -rootdir %JDEV_PROJECT_HOME% -username apps -password %APPS_PASSWD% -dbconnection %DB_CONNECTION%
pause
REM End of process Error page
Exception Details.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG;
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1011)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _oa__html._OA._jspService(_OA.java:84)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at _oa__html._OA._jspService(_OA.java:94)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1352)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1011)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _oa__html._OA._jspService(_OA.java:84)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at _oa__html._OA._jspService(_OA.java:94)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1352)
at oracle.adf.mds.MElement.findElement(MElement.java:97)
at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1011)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _oa__html._OA._jspService(_OA.java:84)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at _oa__html._OA._jspService(_OA.java:94)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)Ok, I admit it's my mistake.
I found a url coded in my CO miss a / at the beginning of the url address.
So, the Application deployment was OK.
Incorrect -> "OA.jsp?page=ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG"
Correct -> "OA.jsp?page=/ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG"Note that, in JDeveloper, page will function successfully without the /, but in EBS it will throw the error.
Code with correct url address embedded.
pageContext.forwardImmediately("OA.jsp?page=/ldc/oracle/apps/sla/calnet/xref/phone/webui/PhonePG",
null,
OAWebBeanConstants.REMOVE_MENU_CONTEXT,
null,
null,
false, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO); Edited by: user595907 on 2010/9/17 下午 4:28 -
Backint failed "ERROR: unable to find file "
Hello
I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
I got errror:
BR0231E Backup utility call failed
ERROR: unable to find file /oracle/BWP/sapdata4
Can u help me
Regards
FethiThis is the backup logfile:
BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
BR0101I Parameters
Name Value
oracle_sid BWP
oracle_home /oracle/BWP/102_64
oracle_profile /oracle/BWP/102_64/dbs/initBWP.ora
sapdata_home /oracle/BWP
sap_profile /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
backup_mode ALL
backup_type offline
backup_dev_type util_file
util_par_file /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
system_info orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
oracle_info BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
sap_info 700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
make_info linuxx86_64 OCI_102 Feb 8 2008
command_line brbackup -c force -p initBWP_sapdata_offline.sap
BR0116I ARCHIVE LOG LIST before backup for database instance BWP
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination /oracle/BWP/oraarch/BWParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 27
Next log sequence to archive 30
Current log sequence 30 SCN: 88160883
Database block size 8192 Thread: 1
Current system change number 88168768 ResetId: 655409152
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data1 17498636288 4 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data2 16450060288 5 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM.data3 15820914688 6 64785 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWM700.data1 15128862720 11 64784 NOLINK FILE 34359721984 104857600 8192
PSAPBWP700 ONLINE* ONLINE+ /oracle/BWP/sapdata4/BWM700.data2 4132511744 12 64785 NOLINK FILE 34359721984 8192 8192
PSAPBWPDIM ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMdim.data1 4202700800 7 64770 NOLINK FILE 10485760000 20971520 8192
PSAPBWPFACT ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMfact.data1 6719283200 8 64770 NOLINK FILE 34359721984 20971520 8192
PSAPBWPODS ONLINE* ONLINE+ /oracle/BWP/sapdata2/BWMods.data1 19868426240 9 64784 NOLINK FILE 34359721984 20971520 8192
PSAPBWPUSR ONLINE* ONLINE+ /oracle/BWP/sapdata1/BWMusr.data1 239083520 10 64770 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE+ ONLINE+ /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1 134225920 20 64785 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ /oracle/BWP/sapdata1/temp_1/temp.data1 10485768192 -1 64770 NOLINK FILE 34358689792 20971520 8192
PSAPUNDO ONLINE- ONLINE+ /oracle/BWP/sapdata1/undo_1/undo.data1 1073750016 2 64770 NOLINK FILE 34359721984 20971520 8192
SYSAUX ONLINE* ONLINE+ /oracle/BWP/sapdata1/sysaux_1/sysaux.data1 671096832 3 64770 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ /oracle/BWP/sapdata1/system_1/system.data1 838868992 1 64770 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
/oracle/BWP/origlogA/log_g11m1.dbf 52429312 1 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g11m2.dbf 52429312 1 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g12m1.dbf 52429312 2 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g12m2.dbf 52429312 2 64777 INUSE NOLINK FILE
/oracle/BWP/origlogA/log_g13m1.dbf 52429312 3 64774 INUSE NOLINK FILE
/oracle/BWP/mirrlogA/log_g13m2.dbf 52429312 3 64776 INUSE NOLINK FILE
/oracle/BWP/origlogB/log_g14m1.dbf 52429312 4 64775 INUSE NOLINK FILE
/oracle/BWP/mirrlogB/log_g14m2.dbf 52429312 4 64777 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf 34979840 0 64774 NOLINK FILE
/oracle/BWP/origlogB/cntrl/cntrlBWP.dbf 34979840 0 64775 NOLINK FILE
/oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf 34979840 0 64770 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
PSAPBWPUSR
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0057I Backup of database: BWP
BR0058I BRBACKUP action ID: bdxzgdlt
BR0059I BRBACKUP function ID: aff
BR0110I Backup mode: ALL
BR0077I Database files for backup:
/oracle/BWP/origlogA/log_g11m1.dbf
/oracle/BWP/origlogB/log_g12m1.dbf
/oracle/BWP/origlogA/log_g13m1.dbf
/oracle/BWP/origlogB/log_g14m1.dbf
/oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
BR0061I 19 files found for backup, total size 108250.510 MB
BR0143I Backup type: offline
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
BR0307I Shutting down database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0308I Shutdown of database instance BWP successful
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
WARNING: unknown parameter: print_log_flag 1
WARNING: sort_backup_type not specified in .utl file
WARNING: default sort_backup_type to <size> for restore
Program: /usr/sap/BWP/SYS/exe/run/backint 5.1
Input File: /oracle/BWP/sapbackup/.bdxzgdlt.lst
Profile: /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
Function: BACKUP
Backup Type: BACKUP_FILE
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
BR0232E 0 of 19 files saved by backup utility
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
BR0231E Backup utility call failed
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
BR0304I Starting and opening database instance BWP ...
BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
BR0305I Start and open of database instance BWP successful
BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
Thank you
Regards
Maybe you are looking for
-
Pl/sql report not populating output
SQL> CREATE OR REPLACE PROCEDURE GET_RECORDS(v_action IN VARCHAR2) IS 2 v_thing VARCHAR2(10); 3 get_records SYS_REFCURSOR; 4 BEGIN 5 IF (v_action = 'DO THIS') THEN 6 OPEN get_records FOR 7 SELECT 1 FROM dual; 8 ELSE 9 OPE
-
Hi. I just bought an IceCam2 from Macally and hooked it up to my Mac OSX. When I open iChat, the camera icon appears however the video of myself is only a black screen with audio. When I go to preferences, instead of having both camera and microphone
-
My iphone 4s camera is getting switch off when i use
My iphone 4s camera is getting switch off when i use and when i use HDR function in the camera its getting switch off after taking picture and I wont see the picture where I have taken, can any one help me out in this or I should go to service center
-
Access Sequence For Import PO Conditions
Hi, As in case of import PO we have to add Excise condition seperately with customr vendor ID as per our regular process while maaking IMport PO we are adding 3 common condition JCV1, JECV, J1CV and after selecting those condition we are entr
-
I have a L7800 Pro Officejet and am running Vista Home Premium 64 bit. Recently the printer has been printing more copies - at least 3 times what I have requested. IT was not doing this before. Help anyone???? This question was solved. View Solutio