Unable to find workbook in the server

When we run 3.x workbook in 7.0 we are getting the following pop-up 'Unable to find workbook in the server'. We were able to open the workbook in the 3.x. Did any one face the same issue.The trace showns authorization are good. Pls. Help!!

Hi,
on thing I noticed... SP 13 is not that stable...
Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
Ciao
Joke

Similar Messages

Unable to Find The workbook on the Server

BEx Experts!
I am opening a Workbook in BEx Analyser (Release 2004s, Support Package 9, Patch 3, Revision 370). I activated this workbook from Business Content (My Cost Centers: Travel Expenses - Current).
I get an information message straight away after clicking Open which says "Unable to Find The workbook on the Server."
I have tried with administrator access as well, without success.
Thanks.
Message was edited by:
Jamie Hylton

Hi Catherine,
Where you are creating workbook...? In production..? Is workbook allowed to change setting is available...?
As i also faced same problem to save workbook in favourates,(BI7 and SP15) gives same error. After saving we can see workbook, but not able to open.
SAP solution is change settings of workbook to changeable in system, then it works.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Unable to find OPMN under the services tab after an essbase re-install

Hi all,
We are getting a new Hyperion(epm 11.1.2.0) system ready for use.I got all foundation services installed and configured successfully.
after installing essbase, I had trouble configuring-so I had to re-install essbase- but after re-installing, I am unable to find OPMN under the services tab. Is there a way to invoke OPMN as a service?
If I try running OPMN.exe, it gives me the error:
ORACLE_HOME is not set
This is what I found in opmn.log:
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: D:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2012-03-22T15:38:01][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2012-03-22T15:38:01][opmn][ERROR:1][17][OPMN][code:ons-listener]10.84.20.207,6712: BIND (Unknown error)
It seems OPMN is trying to bind to an incorrect IP address.I am not sure where the IP Address references can be changed.
Any suggestions?
Edited by: 784749 on Mar 22, 2012 12:40 PM
Edited by: 784749 on Mar 22, 2012 1:30 PM

John,
I finally found a reference to an old server under opmn.xml(of all places). Once I resolved this, I was able to start OPMN.
But OPMN still doesn't show up as a service. I found some Oracle notes on how to setup the same. Hopefully, it will help.
If OPMN is not setup as service(started manually), will it still bring Essbase up? Currently it is not bringing up Essbase.
opmnctl status shows that essbase is down.

New Local Move Request - Error: MapiExceptionLogonFailed: Unable to make connection to the server.

I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 56945
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=114]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
    Lid: 59505   StoreEc: 0x3F2
    Lid: 52465   StoreEc: 0x3F2
    Lid: 60065
    Lid: 33777   StoreEc: 0x3F2
    Lid: 59805
    Lid: 52209   StoreEc: 0x3F2
    Lid: 19778
    Lid: 27970   StoreEc: 0x3F2
    Lid: 17730
    Lid: 25922   StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
    + CategoryInfo          : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.

Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

Unable to automatically step into the server. the remote procedure cannot be debugged.

Hi,
I am trying to deploy report using ssis script c# code.I am using the proxy for ReportingService2010 and following code is giving the error.
code:
ReportingService2010 rs = new ReportingService2010();
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.CreateFolder("MSI Report Demo", "/", null);
Error:
unable to automatically step into the server. the remote procedure cannot be debugged. This usually indicates that debugging has not been enabled on the server.
Please share the idea on it.
Thanks in advance.
-Gautam

just make a trust between to domain and it works .

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Activity monitor unable to execute queries againest the server?

2012 SQL Serevr SSMS
Activity monitor unable to execute queries againest the server?
any ideas???
ebro

Hi,
Please check if there are useful message in SQL error log. If there is lock the memory message was logged in the error log, you may enable
lock pages in memory option for the SQL Server service account and see how it works.
Also, apply the service pack and updates of SQL Server.
To enable the lock pages in memory option, please see:
Enable the Lock Pages in Memory Option (Windows)
http://msdn.microsoft.com/en-us/library/ms190730.aspx
Thanks.
Tracy Cai
TechNet Community Support

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How do i find out if the server admin daemon is running

Hi All,
I've got an OS X server that for some reason ( probably due to me pratting around) has decided not to have a working server admin prog. I can fire up the client program and point it at any of the IP addresses that the server is looking at and then you get an error message basically saying that the server admin daemon is not contactable.
So ...
1). How can i find out if the back end daemon is running
2). what port(s) does it listen on
3). How can I turn on some logging to see what's happening when I run serve admin
4). Any other tips as to how to find out why its not working
Rgds
Alex

You should post this in one of the forums in the Mac OS X Server v10.5 Leopard category. You'll get better response there.

Unable to find BAPI in the explorer

Hi Guys,
This maybe a common issue. But i was unable to find the solution. I am using ECC6.0.
I have released the business object and the method successfully.
I could also test the method. After that i generated the Business Object successfully. But i do not find it in the BAPI explorer.
I heard mandatory documentation is needed. I am trying to reverse the release and document. It asks for a modification, and i document. Still when i release and generate, it does not come in the explorer.
If i try to document the Business Object, i get this message Message no. TK103. 'This syntax cannot be used for an object name'.
Any help will be appreciated.
Best Regards!
Sandip
Edited by: Sandip Roy on Apr 11, 2011 9:21 PM

Hello Sandip,
If you're checking in the "Hierarchial" tab, check under the corres. BO application area(you must have maintained it in SWO1).
If you are checking in the "Alphabetical" tab in the BAPI explorer the custom BOs will be towards the end of the list!
BR,
Suhas

IB Routing issue. Unable to find routing to the corresponding incoming msg

Hi All,
We are facing a Routing issue. The flow of message across the DB is given below.
1) Message will be triggered from 3rd party application to PeopleSoft portal with Service Operation A
2) From portal one more service operation B will be invoked to communicate with CRM
Both the service operations are synchronous. I have tested the Service operation in CRM and I am able to get the results. But in Portal if I test, I am getting the error like
+"Unable to find routing corresponding to the incoming request message"+
I have checked the routing alias name between Portal and CRM data bases and Its same.
could you please give us a clue to debug this further?
Thanks,
Hari.A

You should check which permission list the service operation is attached to, and check if the user has been granted to, Something like the following from the backend :
SELECT   distinct c.roleuser
FROM     psclassdefn a, psroleclass b, psroleuser c
WHERE    a.classid = b.classid
AND      b.rolename = c.rolename
AND      a.classid = '<permission_list>' If nothing is returned for your user, then you could created a new role and give it to the user.
Also, since you are on Peopletools 8.52, all this configuration settings can be done through Integration Network WorkCenter. I wrote articles about that (and you can find something about permission list for a given service operation as well) :
http://gasparotto.blogspot.nl/2012/11/peopletools-852-integration-network.html
Nicolas.

Unable to activate debugging on the server

Hello,
At the Developer Studio at the J2EE Engine tab view there is an option to Enable debugging on the portal server (By right-clicking on server0).
The problem is that all this menue is shaded and unavailable to me. What should I do in order to be able to use the features ?

Sorry I said VA before - I meant go into the configtool.
In there click on your instance and the on the right pane click on the tab Servers Debug. The top option Debuggable has to be checked.
Hope this elps

CHARM: Unable to find "Logon to the System" in Actions

Hi Experts,
I have created SDCR type of change document successfully using appropriate maintenance cycle. For testing purpose, I am using a user who has SAP_ALL profile. So, this user is doing everything like, create a change document, approving and so on. As a next standard step, this user (whose BP number is 120), is trying to set the status of change document to "In Development" and log on to the back end system to implement changes. However, I have got the below surprises:
1. System automatically picked up BP as 160.
2. In field "Current Processor" of the SDHF document flow of main change request, when I mention BP as 120, system throws below error message:
Only one partner function of function category Person Responsible is allowed
3. When I mention BP as 120 back in Current Processor field, error message goes off. However, I could not find the option of "Logon to System"
May anybody please tell me how I can fix this issue?
Hoping to have valuable suggestions.
Regards,
Faisal

There is an "OR" missing, check that
( " in Bearbeitung
     &CRM Service Process.ErrorFreeFlag& = X
     and    &CRM Service Process.User Status& [*] E0002D+HEAD
) " in Bearbeitung
or    ( " Erlaubte Status auch im Fehlerfall
     &CRM Service Process.User Status& [*] E0004D+HEAD
     or    &CRM Service Process.User Status& [*] E0006+DHFHEAD
     or    &CRM Service Process.User Status& [*] E0007+DHFHEAD
     or    &CRM Service Process.User Status& [*] E0005+DHFHEAD
     or    &CRM Service Process.User Status& [*] E0009D+HEAD
) " Erlaubte Status auch im Fehlerfall
or    &CRM Service Process.User Status& [*] E0006+DHFHEAD
or    &CRM Service Process.User Status& [*] E0007+DHFHEAD
or    &CRM Service Process.User Status& [*] E0005+DHFHEAD
or    &CRM Service Process.User Status& [*] E0018+DHFHEAD
or    &CRM Service Process.User Status& [*] E0009D+HEAD
or    &CRM Service Process.User Status& = E0017ZDHFHEAD
or    &CRM Service Process.User Status& = E0016ZDHFHEAD

Windows 2012 Domain Controller: Failed to open the runspace pool. The Server Manager WinRM plug-in might be corrupted or missing

Hi all,
We have been battling a problem for the last couple of days when we try to add the first windows server 2012 DC to an already existing Domain.
The Server installation goes smoothly and we can add the computer to the domain and its all green.
After we promote the server to a domain controller the WinRM service starts acting up (not responding anymore).
The server manager console shows Remote Management as disabled, and when we try to enable it via the console or Powershell it freezes up.
The AD DS part of the console is saying that there are post-promotion tasks that need to be completed but once we click on the task it takes us to the promotion wizard again, that basically complains that: Failed to open the runspace pool. The Server Manager
WinRM plug-in might be corrupted or missing.
In the Remote Management Event log we see the following entry: "The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)" Event ID 138
We are unable to do anything with the server (demote, add roles, remotely manage...). We tryed the following already:
1. Recreate from scratch
2. Checking the GPOs to see if there is anything setup about RM -> came up with nothing
We just ran out of ideas so HELP PLEASE !
BR
Tomaz Praprotnik

Hi Cicely,
Yes the error from the Windows Remote Management event log contains (I took out the User and FQDN of the Computer):
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:38:53 PM
Event ID:      138
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
The client got a timeout from the network layer (ERROR_WINHTTP_TIMEOUT)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>138</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:38:53.786357100Z" />
    <EventRecordID>6876</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0003-D261-FD18382BCE01}" />
    <Execution ProcessID="1084" ThreadID="2924" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
</EventData>
</Event>
There is also another entry that sometimes comes up:
Log Name:      Microsoft-Windows-WinRM/Operational
Source:        Microsoft-Windows-WinRM
Date:          3/29/2013 1:36:34 PM
Event ID:      142
Task Category: Response handling
Level:         Error
Keywords:      Client
User:
Computer:
Description:
WSMan operation Invoke failed, error code 2150859046
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WinRM" Guid="{A7975C8F-AC13-49F1-87DA-5A984A4AB417}" />
    <EventID>142</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>10</Task>
    <Opcode>2</Opcode>
    <Keywords>0x4000000000000002</Keywords>
    <TimeCreated SystemTime="2013-03-29T12:36:34.076973400Z" />
    <EventRecordID>6869</EventRecordID>
    <Correlation ActivityID="{18FCFBD2-2B38-0001-F328-FD18382BCE01}" />
    <Execution ProcessID="4888" ThreadID="4392" />
    <Channel>Microsoft-Windows-WinRM/Operational</Channel>
    <Computer></Computer>
    <Security UserID="" />
</System>
<EventData>
    <Data Name="operationName">Invoke</Data>
    <Data Name="errorCode">2150859046</Data>
</EventData>
</Event>
Best regards
Tomaz Praprotnik

[SOLVED] No boot after update unable to find root device|libmount.so.1

Hi,
after my most recent update, which was the first for a long time, I am getting the following error when trying to boot my system:
mount: /lib/libmount.so.1: version 'MOUNT_2.20' not found (required by mount)
cat: can'topen '/proc/cmdline': No such file or directory
ERROR: Unable to find root device ' '
The same for MOUNT_2.21. This error still persists after chroot manual installs of util-linux and glibc. I tried downgrading util-linux still witout success. Following reply #15 of: https://bbs.archlinux.org/viewtopic.php?pid=1130638 did not solve it either.
I also reinstalled grub just to be on the safe side, but nothing helped.
Please help.
Thanks
Last edited by mark-o-solo (2012-08-02 14:56:36)

https://wiki.archlinux.org/index.php/Pa … nger_boot.
If you fucked up the glibc migration (read "The /lib directory becomes a symlink" from the archlinux.org front page), there are countless threads about this, including a big one (350+ replies) in the "Pacman & Package Upgrade Issues" category. I'm sure you will find some answers there.

Unable to find workbook in the server

Similar Messages

Maybe you are looking for