Unable to flush SharedObject with OSX v10.9.2

Why do I get this error message "Error #2130: Unable to flush SharedObject." when trying to use shared objects with OSX vesion 10.9.2 and not on earlier OS versions? Can this problem be fixed?

Welcome to Apple Discussions.
Have you run Software Update? If not, you should and install the updates suggested. Note whether there is an HP printer driver update amongst the suggested updates. If there is, go ahead and let SU do the update for you. You should have your printer connected and switched on throughout this process.
After this go to System preferences/Print & Fax and see whether your printer is listed. If it is there might be 2 mentions - one for FAX the other for print.
Let's know what all this shows.
Neville

Similar Messages

What Officejet Pro is compatible with OSX v10.6.8

what Officejet Pro is compatible with OSX v10.6.8

Thanks! I found iLife 11 on amazon, but can I download it? I don't mind paying for it, just don't want to wait. Thanks.
two_macs...

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

I have a Canon Pixma MP500 scanner printer, is there a driver that can be loaded that is compatible with OSX v10.9.4?

Thanks, PAHU, for providing the Australian site for the Canon driver. I have an MP500 and it still seemed to print fine after I downloaded Yosemite. However, as others have reported, the MP Navigator no longer performed normally in scanning. The "Save As" keys didn't align and therefore didn't work but one could still scan using an alternative method ("Scan with scanner driver" button).
In any case, my hard drive subsequently failed on this 2010 27" iMac and when it was replaced the tech installed Yosemite 10.10.1. Just tried printing this evening and it wouldn't. Advised I needed undefined "software." Got various error messages. Went to Google and read this and downloaded that to no avail. Tried the Gutenprint driver but it too didn't work. Latest error was "stopping job because the scheduler could not execute a filter." Had no clue what that meant! System info listing for the printer (under About this Mac, System Info) lacked any reference to permissions or a printer utility version (but I didn't notice or know significance of omissions). Finally I downloaded from the Australian site, just the print driver 10.51.2. The printer then printed!!! (The MP Navigator scanner remains flawed but works by clicking "Scan with scanner driver" rather than the normal way.) I'm holding my breath that things will continue to work.
Thanks again, PAHU, for your help, and Greg and Pam and Andy too!

Unable to Delete Older Printing Presets -- Officejet Pro 8000 Wireless Printer with OSX v10.6.4

I find that, after upgrading to the latest Officejet Pro 8000 A809 (989005) printer driver, I am not able to delete Presets that were created with earlier versions of the Apple/HP supplied printer driver. I am using OSX v10.6.4 and v2.0.3 of the HP Printer Driver.
When I try to print from an application the Presets that had been previously created appear on the menu, but 'Delete" is not available as an option for any of those older Presets.
If I create a new Preset, it appears in a section of the menu listing below the Presets created by earlier versions, and the Delete option is available to remove any Presets made with v2.0.3 of the driver.
I would like to delete the earlier Presets, since are no longer necessary given the changes that have been introduced in the latest versions of the HP printer driver.

If you have HP software for pre-10.6 Snow Leopard, you must uninstall the software using the 'scrubber' option. Also, you do not need the hp software at all - both print and scan drivers are built into the OS. I'd recommend uninstalling, but make sure to do it this way:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Next, remove and re-install the printer in System Preferences, Print & Fax.
You do not need the software now since Snow Leopard has both print & scan drivers built-in. Scan from Preview or Image Capture apps. Scanning from the front panel of the printer does not yet work.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I am using a 1.5 GHz Powerbook G4 with OSX v10.4.11 Can I upgrade to 10.5 and will that let me use an Ipad 2 and a Iphone 4 ? Also, where would I get a disc of 10.5?

I am using a 1.5 GHz PowerBook G4 with OSX v 10.4.11. Can I upgrade to 10.5 and will that allow me to use an Ipad 2 and an Iphone 4. Also, where could I get the disc for the upgrade (10.5) ?

Yes for both iPhone and iPad 2.
You can get Leopard from Amazon.
http://www.amazon.com/Mac-OS-Version-10-5-6-Leopard/dp/B000FK88JK/ref=sr_1_1?ie= UTF8&qid=1305690502&sr=8-1
Make sure your PBook meets Leopard minimum requirements.
http://support.apple.com/kb/HT3759
Avoid eBay and Craigslist for Mac software.

Cannot Install HP C4680 Printer to New iMac with OSX v10.6.2

I've followed the HP install directions to a tee (for Macs, connect USB before inserting install CD). I've also tried workarounds online ((a) connect USB after install but before set up and (b) turn off computer and printer and reboot and (c) attempt to install from System Preferences). I've also uninstalled and then downloaded installer and new drivers from the HP website and attempted to do (a), (b) and (c) with the downloaded installer and new drivers.
Nothing works. The install goes fine, but when I reach set up, my printer is not listed. When I check the box that says "my printer is not listed" (or something very similar to that), I get a message saying that if my printer is not listed, then I have the wrong installer and need to get the correct installer. However, no matter how many times I uninstall and reinstall the "correct" download from the HP website, I am stuck in "Groundhog Day."
I've been trying to install this printer for three days now. Any solutions would be very appreciated.

Welcome to Apple Discussions.
Have you run Software Update? If not, you should and install the updates suggested. Note whether there is an HP printer driver update amongst the suggested updates. If there is, go ahead and let SU do the update for you. You should have your printer connected and switched on throughout this process.
After this go to System preferences/Print & Fax and see whether your printer is listed. If it is there might be 2 mentions - one for FAX the other for print.
Let's know what all this shows.
Neville

Unable to load pictures with mac osx..

I was wondering if anyone knows the reason why I'm unable to load pictures with my macbook for e-bay when I sell??? It just keep turning and turning with no results...
Is it the new operating platform (osx) or what could it be?? I have tried it with an older mac, had no problem loading them....
Thanks for comments....David..

Is there an uploader program from ebay that you use? If so, then you might try digging out the preference file from your library/preferences and see if it generates a new, non-corrupt one. If it uses a browser interface and that is stalling, then I'd suggest using a different browser. You can also ask ebay support.

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

The MAC OSX v10.4 just comes up with the grey apple which alternates with ?. Tried pressing "apple key" S. Black screen appears Error Loading Drivers. No discs. Any ideas?

My son has been deleting files. Now when he turns on the MAC OSX v10.4 it just comes up with the grey apple keywhich alternates with a NO ENTRY symbo and ? symbol. Tried pressing "apple key" S. Black screen appears Error Loading Drivers.
We have no discs. Any ideas?

You should have given your son access to a Parental Controlled Account only. Unfortunately without the disks, and from the sounds of it, no backup, you are stuck. You might be able to recover the information with an external hard drive and an appropriate data recovery program, but getting the 10.4 original discs is increasingly difficult. If a Mac is Intel, only the original discs can be used to install 10.4 which you would need to call AppleCare for and hope they still have a copy of, or a cloned backup. If it is PowerPC G3, G4, or G5, you can probably find the 10.4.6 retail disc, discussed here to Archive and install 10.4.
Before Archive and Installing, which you can do with either the original 10.4 or retail disc, be sure to attempt that data recovery. If you choose to try to Archive and Install 10.5, and you have PowerPC, you'll lose access to Classic Applications. You could upgrade to 10.6 if you have Intel and 1 GB of RAM, or 10.7 if you have 2 GB of RAM, but some application compatibility might be lost the further you upgrade.

Mac OSX v10.6.5: How's it working for you with Premiere Pro CS5?

If you've installed Mac OSX v10.6.5, let us know how it's working for you.
Please make sure that you're using the most recent update for Premiere Pro CS5 before you report back. We don't want to waste our time disentangling problems that were actually fixed in Premiere Pro CS5 (5.0.2) from issues that still exist.

So, here is my experience:
http://forums.adobe.com/thread/751458?tstart=0
Basically:
Premiere Pro does not want to play the timeline (or the source window) anymore. Sometime it plays for 2 minutes, sometime for 2 seconde and then stops, but most of time, it wont play at all.
I can scroll over my timeline (no sound scrolling), but when I hit space bar (or clic on the play button) I can see the play button turning into a square (which mean it's now the stop button), but the timecodes doesn't run and the image doesn't play.
So I suggest people to not being stupid as I was and to wait before to update... And hope a solution to come soon.

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

Does anyone know that if I update my iPhone 4 to iOS 6.1.3, will it still be useable by iTunes 10.6.3 through does iOS 6.1.3 work with iTunes 10.6.3 (25) running on a G5 with OSX 10.5.8?

useable by iTunes 10.6.3 (25) running on a G5 with OSX 10.5.8?

No. It will not.
The system requirements are quite clear:
http://www.apple.com/iphone/specs.html
Apple ID (required for some features)
Internet access5
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)

Apple Mail (v6.6, Mac OSX v10.8.5) mixes up mail threads - why, and what can I do?

Dear community,
I am having a weird synchronisation problem. My Mail (v6.6) on my MacBook Air (Mac OSX v10.8.5) mixes up random email threads after I read emails on my iPhone (5C).
E. g. there is an email thread with Frank. Frank writes a new email that I read on my iPhone. Shortly after, I open Mail on my MacBook, so that Frank’s email is downloaded there as well, displayed as "read" and added to the existing thread with Frank. However, although still being named "Frank", showing the current date and reference, in fact it is an email of Fritz from two years ago, having nothing at all to do with the thread with Frank.
Synchronising with the iPhone with USB has no effect, although the emails remain correctly displayed on the iPhone. On my MacBook’s Mail, the email from Fritz keeps to exist a second time at the time and place where it is supposed to be. Frank's email that has been replaced incorrectly, seems to be lost.
I don’t have to explain how unfortunate such random email shuffling is. I shall be thankful for any support and hints. Many thanks,
Ray Taras

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Trying to network HP Envy 4500 all in one with OSX 10.9.4

First time installation of HP Envy 4500 all in one was going well on Mac with OSX 10.9.4. However I can only get the printer to work with cable. HP instructions were to re-insert CD and follow instructions for 'reconfiguring without cable' however this was not an option on the CD, it just tried to repeat the installation.
Configuring Device through my Mac came up wit this message- "Device not reachable. the woreless network settings were successfully downloaded to your device. However your mac was unable to locate the device on the network."
There is no point me having the wireless option if it needs to have a cable connection. Please can anyone help me with this last stage to get set up. Many thanks.
This question was solved.
View Solution.

Hello @Allgoodthyngs , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into connectivity issues. I would like to help.
I would recommend you perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to flush SharedObject with OSX v10.9.2

Similar Messages

Maybe you are looking for