Unable to generate output. No data found in PRM

Hi all,
I am not able to see CPU Utilization and overall CPU Utilization report in PRM eventhough I have loaded Kernel reader (simple) module. System is running over 48 hours. There should be data for these reports.
But it keep prompting me following error message:
Unable to generate output. No data foundWhat can I check next in order to show the these report? Please help.

hi
dear u commit after inserting data or not do commit then check
Rizwan
www.rizwanshafiq.blogspot.com

Similar Messages

CSV output No data found

Hello,
My HTMLDB report displays data, but when a CSV file is generated, 'No data found' displays. Any ideas??

Yes the above mentioned Computation worked for me.
Here's what I did on the page in question.
Create a new Page Computation
Type: Static Assignment
Computation Point: Before Header
Computation: ALL
Condition Type: Value of Item in Expression 1 is NULL
Expression 1: P8_FILTER_BY_TEAM (the name of the page item that needs the default session state set.)
The conditional is important because if a person changes the value and submits the page we want to hold that new value in session state and filter the result set accordingly. However, if the page item is NULL then we're simply extending the display default value to also be the session state default for P8_FILTER_BY_TEAM.

Unable to generate output due to huge xml generated

Hello All,
I am working on etext templates for generating EFT payments.
When the payments are below 100 then the output is fine. But when it is crossing 100 payments then it is not producing any output.
This is a standard rtf which I have modified and added some xpath conditions in the OutboundPayment table. I think because of xpath conditions the xml structure is modified internally and the xml generated is very huge.
When I have used the original rtf without adding any conditions the output is produced for any number of payments.
Can any one provide some help on this.

sorry posted in wrong forum

Unable to generate output for Ship Docs.

Ship confirm docs.
Pack Slip,
Commer Invoice ,
Bill of lading
Are not picking xml Templates.The OUTPUT is unpublished.
But when they run as independent request output is correctly generated .Please suggest if any one has same problem

they are Customized Reports. Created new Doc set for Ship confirm.
When Sales order is Ship confirmed and when we are are printing these docs.They are not picking XML templates in Layout.
Edited by: Sankuratri on May 21, 2009 11:57 PM

Not able to generate output in CSV(EXCEL) format

Hi,
XML Publisher report is giving me an error when the Preview Format is 'EXCEL'. When I keep the Preview Format as 'PDF', the concurrent program is running successfully and the PDF output is getting generated. But for EXCEL outputs, I am getting the following error :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The operation completed successfully. Error processing resource 'http://erpap01:8010/OA_CGI/FNDWRR.exe?temp_id=1...
<td valign="top" class="c7"><p class="c8"><span class="c9">13 July 2009 13:15:57 PM</span>...
I have using the following Data Template for Data Definition
<?xml version="1.0" encoding="UTF-8"?>
<dataTemplate name="EMPDT" description="Employee Details" version="1.0">
<parameters>
<parameter dataType="character" name="p_DeptNo"> </parameter>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT EMPNO
                   ,ENAME
                   ,JOB
                   ,MGR
                   ,HIREDATE
                   ,DEPTNO
                   ,SAL
                   ,COMM
             FROM scott.Emp
          WHERE deptno = NVL(:p_DeptNo,deptno)
     ]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_EMP" dataType="varchar2" source="Q1">
<element name="EMPNO" value="EMPNO"/>
<element name="ENAME" value="ENAME"/>
<element name="JOB" value="JOB"/>
<element name="MGR" value="MGR"/>
<element name="HIREDATE" value="HIREDATE"/>
<element name="DEPTNO" value="DEPTNO"/>
<element name="SAL" value="SAL"/>
<element name="COMM" value="COMM"/>
</group>
</dataStructure>
</dataTemplate>
When I click on Diagnostic - View XML, copy the XML file and generate report using Word plugin, I am able to generate output in PDF and in EXCEL. But for some reason, when I try to run the XML Publisher report using concurrent program, I am unable to generate output in EXCEL and I am getting the error as listed above.
When I click on View Template - Preview, keeping the Preview format as Excel, I get the following error :
Exception Detail
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor179.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
at oracle.apps.xdo.oa.template.server.TemplatesAMImpl.processTemplate(TemplatesAMImpl.java:2130)
at sun.reflect.GeneratedMethodAccessor173.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:190)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:153)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:749)
at oracle.apps.xdo.oa.template.webui.TemplateGeneralCO.previewTemplate(TemplateGeneralCO.java:741)
at oracle.apps.xdo.oa.template.webui.TemplateGeneralCO.processRequest(TemplateGeneralCO.java:158)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
at oa_html._OA._jspService(_OA.java:85)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
at oa_html._OA._jspService(_OA.java:95)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
Caused by: oracle.xdo.parser.v2.XMLParseException: Start of root element expected.
at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:319)
at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
Any inputs would be appreciated
Regards
David

May be it is browser problem? use another browser like Firefox
Edited by: ranalawa on Jul 14, 2009 2:21 PM

Unable to generate a PDF from SWF

Hi,
I am using SWF file as my form. I am unable to generate the form data into PDF with pdfgenerator Livecycle ES2.
Does anyone facing the problem?? any help on this....
Thanks in advance

Hi,
Even we are trying to convert SWF file to PDF file and it is not working out. I believe that we should have Acrobat 9.0 or higher in order to use Generate PDF service. We have Adobe Reader version 9.3.1.
Please help.

Pick Slip report gives 'No Data Found' output

Hi All,
Problem Statement:
Iam unable to generate Pick release report, the shipping
lines status is "ready to release" and we have a available quantity for the shipment.
Step1 : Create a Order.
Step2 : Save and Book the Order.
Step3 : Pick Release the Order.
Step4 : Go To " View My Requests".
Step5 : Select the Request Id " Pick Slip Report "
Step6 : Click on Output.
Result " No Data Found.
Thanks in Advance
SYR

Hi SYR,
Pick Slip report gives you out put as NO DATA FOUND, is basically, bcos there has not been any picking of the item, reason may be,
1. Qty avaialble wont be reservable and transactable
Check in Inventory> On handqty > click availibility tab
And see whether the item is available to transact & reserve.
If you have enought qty thn you shld be able to pick release tht item.
2. Check which sub inventory are you using while pick release, is it the same as where the item is kept.
Try this out.
This may help.
Thanks
Manoj

No data found in csv output

I have a classic (non-interactive) report that shows some strange behaviour.
It's a simple page with a report region.
On the report attributes page under 'report export' the value for 'Enable CSV output' is set to 'Yes' and 'Link label' has a meaningful discription.
In the development database it works as expected:
When I run the page the data is displayed and when I click the link for csv output I can either save or open the file. In both cases I find the data I expect in the csv file.
In production, however, when I run the page the data is displayed, but when I click the link for csv output the resulting csv file just shows "No Data Found"
I can imagine the report not returning any data, but in that case I shouldn't see any data on screen either.
And it's extra weird that in development it all works fine.
Anybody that can offer any help?
Thanks in advance.

Hi Eric
I would never dream of telling anyone not to argue with me :D I've been wrong before and will be again, no doubt!
For the DIV problem, I was more concerned with < appearing in the output rather than the SQL statement itself - generally problems such as this happen when something on the page is incorrectly formed. When you get a chance, in FireFox, install the Web Developer add-on. When this is installed, on the right-hand end of its toolbar, you will see three buttons - the last two tell you about css and javascript errors. For HTML errors, if you have a text editor that has syntax highlighting, do a View Source on the loaded page, take a copy of the source and paste it in to a new document in the text editor. Save this with an HTML file extension. This should colour-highlight everything. It should become obvious what is wrong as you tend to end up with way too much in the same colour. Finally, on the loaded page, right-click on the DIV text and select Inspect Element - this switches you to a heirarchical view of the HTML on the page in the FireBug pane. Follow the tree up from the DIV and have a look at the structue - at some point, something will look wrong.
Andy

"no data found" when trying to generate report

Hi,
I have a problem when I try to generate a report. It says "no data found", but the property figures in the data collection on the host. With another property, I get the graph (Overall % CPU Utilization), but with this (Overall % CPU Idle) I get only no data found.
Ooops, worse yet. I stop the smc with es-stop -A in the server and started again with es-start -A. Now, no one of the reports works!! The one who worked, now don't!
Someone experiment the same problem? Or knows how to fix this, (I guess) "anomalous", behavior?
Please let me know, I've been with this for weeks!
Thank you in advance!
Regards,
Martin Olivella

I can make a preseted report, but if I try to make
another report (with exactly the same options as the
preseted), it gives me "no data found" once more.
Any suggestions?Are you sure you're looking at the same data points? For example, there's a "Kernel Reader" module, and a "Kernel Reader (Simple)" module... and from memory the built-in reports use the "Simple" data.
Even if you're graphing a metric that exists in both modules (i.e. 5 Minute Load Average), they're still different, so make sure you choose the correct one from the picklist when you make your own Report.
Regards,
[email protected]
http://www.HalcyonInc.com

No data found in report csv or pdf output on first page load

No data found in report csv output on first page load. Report shows up on page, but no data found in csv or pdf output. I always need to submit the page and then it shows data in downloads. The page contains a form (read-only) with a report that references 4 page items by using something like the following:
and b.employee_no = v('P5_EMPLOYEE_NO')
and c.fisc_year_pk = v('P5_FISC_YEAR_PK')
and b.job_class = v('P5_JOB_CLASS')
and b.organization = v('P5_ORGANIZATION')
Again, report in the page shows up except there is no data in downloads. Can anyone help me solve this problem? I'm running Oracle APEX 4.2.1 in Oracle database 11gR2.
Thanks.

Sounds like a classic session state issue.
You need to populate you page items using page rendering computations to ensure they're set to session state.
Or if the download is triggered from a button press, you need to ensure those page items are submitted to session state, perhaps via a PL/SQL action.
Scott

No data found generated on client - how to trace?

Hi,
There is an application server that opens a connection pool to my DB.
One of the connections generates no_data_found errors. How would I trace those on the server?
exec dbms_system.set_sql_trace_in_session(51,84,true);
does not seem to be enough because this error does not show up in there.
Regards,
Nico

I ve now actually activated a
alter system set events '1403 trace name errorstack level 3';
and every time queries are executed it returns a result, but behind there is some type of error generated.
Example:
SQL> select sysdate from dual;
SYSDATE
09-APR-10
-> tracefile:
*** SESSION ID:(34.251) 2010-04-09 12:39:24.173
*** 2010-04-09 12:39:24.173
ksedmp: internal or fatal error
ORA-01403: no data found
Current SQL statement for this session:
SELECT USER FROM DUAL
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp()+328 CALL ksedst() 00000000B ? 000000000 ?
000000000 ? 102FA2278 ?
00000003E ?
FFFFFFFF7FFF92A8 ?
ksddoa()+280 PTR_CALL 0000000000000000 000103393 ? 103393000 ?
1033936A8 ? 103398000 ?

Unable to fetch row...No data found

Hello,
After table being truncated, and new data set being inserted in that table, I'm getting the following error message 'no data found...unable to fetch row' . Data was getting fetched in the form by the primary key with the original data set in the table, but after truncate/insert, it is no longer working.
Any idea why?
Regards,
hm

hi
dear u commit after inserting data or not do commit then check
Rizwan
www.rizwanshafiq.blogspot.com

"Unable to generate initialization code within Repeater, due to id or data binding on a component that is not a visual child. "

Error:
"Unable to generate initialization code within Repeater, due to id or data binding on a component that is not a visual child. "
Code snippet:
<mx:Repeater
width="100%" height="100%" id="rpp" dataProvider="{loginDataseriesData.series}" >
<mx:Panel width="100%" title="{rpp.currentItem.@name}">
<mx:DataGrid width="100%" dataProvider="{rpp.currentItem.data}" id="loginDataDG" itemClick="loginDataDGClickevent)" sortableColumns="false" draggableColumns="false">
<mx:columns>
<mx:DataGridColumn headerText="Age Group" dataField="@periodValue"/>
<mx:DataGridColumn headerText="Year" dataField="@timePeriod"/>
<mx:DataGridColumn headerText="Value" dataField="@dataValue"/>
<mx:DataGridColumn headerText="User Name" dataField="@userName" editable="false"/>
<mx:DataGridColumn headerText="Notes" dataField="@notes"/>
</mx:columns>
</mx:DataGrid>
Thanks

<mx:DataGrid
width="100%" dataProvider="{rpp.currentItem.data}"
DataGrid indeed not a visual child of your Repeater, since it's visual child is Panel not a Grid

Unable to open SO Form - ORA-01403: No data found error

Hi All,
I have created a new OU, a new INV org & sub-inventories under it in the Vision Instance 11.5.10.2. I have linked this OU to the existing LE - Vision Operation & SOB - Vision Operations.
Then, I have created a new OM responsibility just like OM SuperUser responsibility & have set the MO: Operating Unit profile option to the newly created OU at the responsibility level & finally ran the Replicate Seed Data program for this OU as the parameter.
When I navigate to the new responsibility & try to open on the Sales Order form, i'm getting an error as "ORA-01403 : no data found in the Package OE_Order_Cache Procedure Load_Set_Of_Books" & the SO form doesn't open at all.
Can anyone please guide me how to resolve this issue or is there any set-up that I'm missing? The package & package body OE_ORDER_CACHE is 'VALID' in the database.
Regards,
Hemanth

Hi Hemanth,
Hope by now ur issue is resolved.
If not pls check the following.
Pls check all the profile options
GL set of books
Mo operating unit
These are mandatory.
Apart from that check whether u have set the system parameters in OM and AR.
If these parameters are not set u cannot open the sales order form.
Pls check this.
Regards,
Madhu

Adogjf Unable to generate jar files under JAVA_TOP error while patching

Hi,
I'm upgrading my version of Java from 1.3.1_19 to 1.5.0_17. I downloaded the jdk-1_5_0_17-linux-i586.bin file and unpackaged it to /u0/<SID>/<SID>db/10.2.0. It unpackaged it to a new directory jdk1.5.0_17 (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17), whereas the old version is in a directory jdk (/u0/<SID>/<SID>db/10.2.0/jdk).
Having done that I had to run an interoperability patch (4372996). Upon running this patch I received an error at the end:
adogjf() Unable to generate jar files under JAVA_TOP
There were no other errors.
I think the problem has to do with where my new java version is located but I'm not sure. I'm thinking that it's still looking under the old JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk) when I want it to look under the new JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17). So, should I move the contents from the new directory (jdk1.5.0_17) to the old directory (jdk) or is there a way to 'point' it to the new JAVA_TOP.
Please let me know if I'm totally off base and there's another solution. We're currently on EBS 11.5.10.2, DB 10.2.0.4 and RHEL 4 Update 5.
Thanks,
Lia.

Here you go. Hope this helps you to help me :-). Thanks.
+
** Generating the product JAR files...
STRT_TASK: [Generate JAR files] [] [Fri Mar 27 2009 09:20:32]
STRT_TASK: [Generate JAR files under JAVA_TOP] [] [Fri Mar 27 2009 09:20:32]
Signing product JAR files in JAVA_TOP -
/u0/mary/marycomn/java
using entity Customer and certificate 1.
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u0/mary/marycomn/java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u0/mary/maryappl/admin/mary/out/genjars.cmd
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u0/mary/maryappl/ad/11.5.0/java/adjri.zip:/u0/mary/marycomn/util/jre/1.1.8/lib/rt.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/i18n.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/tools.jar:/u0/mary/marycomn/java/appsborg.zip:/u0/mary/marycomn/java/apps.zip:/u0/mary/maryora/8.0.6/forms60/java:/u0/mary/marycomn/java"
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
The JDK version is 1.1.8
Validating the files/directories specified for -areas option
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
About to Analyze the input areas : Fri Mar 27 2009 09:20:36
WARNING: Will not load stale resource unit META-INF/services/javax.xml.parsers
WARNING: Will not load stale resource unit META-INF/services/javax.xml.transform
Done Analyzing the input areas : Fri Mar 27 2009 09:20:43
About to Analyze/Generate jar files : Fri Mar 27 2009 09:20:43
About to Analyze fndnetcharts.jar : Fri Mar 27 2009 09:20:43
Up-to-date : fndnetcharts.jar
Done Analyzing fndnetcharts.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndtdg.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndtdg.jar
Done Analyzing fndtdg.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndjgl.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndjgl.jar
Done Analyzing fndjgl.jar : Fri Mar 27 2009 09:20:45
About to Analyze fndjle.jar : Fri Mar 27 2009 09:20:45
Up-to-date : fndjle.jar
Done Analyzing fndjle.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndlrucache.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndlrucache.jar
Done Analyzing fndlrucache.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndgantt.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndgantt.jar
Done Analyzing fndgantt.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndpromise.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndpromise.jar
Done Analyzing fndpromise.jar : Fri Mar 27 2009 09:20:48
About to Analyze fndforms.jar : Fri Mar 27 2009 09:20:48
About to Generate fndforms.jar : Fri Mar 27 2009 09:20:49
Done Generating fndforms.jar : Fri Mar 27 2009 09:20:50
About to Sign fndforms.jar : Fri Mar 27 2009 09:20:50
ERROR: Javakey subcommand exited with status 1
Javakey standard output:
Adding entry: META-INF/MANIFEST.MF
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java Key Generation
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Javakey error output:
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Successfully created javaVersionFile.
Customer not found in database.
java key error:
adjava -ms128m -mx256m sun.security.provider.Main -gs /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.tmp /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.uns
The above Java program failed with error code 1.
Done Analyzing/Generating jar files : Fri Mar 27 2009 09:20:51
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Failed to generate product JAR files in JAVA_TOP -
/u0/mary/marycomn/java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
You should check the file
/u0/mary/maryappl/admin/mary/log/4372996.log
for errors.
+

Unable to generate output. No data found in PRM

Similar Messages

Maybe you are looking for