Unable to get backed up data in pages after iCloud restore

hi friends,
i restored my ipad from an i iCloud backup. i am able to see all data restored including numbers but not of pages.
when i go to the iCloud tab, i am seeing all the documents listed, but they don't appear in pages.
any guidance on this will be very helpful.
thanks in advance.

can someone help? this is shaking my trust in icloud backups.
i am on iOS 6.1.

Similar Messages

  • Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75  . Pls. help

    Is there any way to get back my data if I had not restored it from time machine before reinstalling Mac OS X on my comp from utility. PS - My OS version has downgraded from Mountain Lion to Mac OS X 10.75  . Pls. help

    Look at the blue box on this link:
    http://pondini.org/TM/19.html
    Ciao.

  • There is no home page icon that I can find. How can I get back to my home page after going to aol or drudge report??? I have beta 9

    I have firefox 4.0 beta 9 and on previous versions there was always an icon to return to firefox home page. When I upgraded to beta 9 this icon was not there. What's up????

    You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
    In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
    Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

  • How do I use Display Dialog to get back a date?

    Can anyone tell me how to use Display Dialog to get back a date?
    I am using the following code that does not work. It does not accept anything.  And I have searched high and low for an answer to my question and found nothing.
    repeat
           display dialog "When should I remind you (date)?" default answer ""
           try
                 if the text returned of the result is not "" then
                        set the requested_text to the date returned of the result as date
                        exit repeat
                end if
           on error
               beep
    end try
    endrepeat
    display dialog requested_text
    The code is based on what I found in AppleScript 1-2-3 (page 300). It shows examples for getting text and numbers but not one for dates.
    For what it is worth, my goal is to create a script that will convert an email from Evernote into an iCal Reminder. To do so, I want to ask the user (myself) for the reminder's date and time. I am assuming I need to ask for each separately. I also assume that once I get the date and time for the reminder, it should be relatively straightforward to 'make' a 'todo' with an alarm.
    Thanks in advance.
    -David

    Hi David,
    Try this:
    repeat
        set theCurrentDate to current date
        display dialog "When should I remind you (date)?" default answer (date string of theCurrentDate & space & time string of theCurrentDate)
        set theText to text returned of result
        try
            if theText is not "" then
                set theDate to date theText -- a date object
                exit repeat
            end if
        on error
            beep
        end try
    end repeat
    display dialog (date string of theDate & space & time string of theDate)
    You might also have a look at this page of the AppleScript Language Guide.
    Message was edited by: Pierre L.

  • HT4463 How do I get back to the same page I was on?

    When I have finished reviewing an app, if I click the back arrow in the top left corner it takes me back to the first page of the category. Not very user friendly when there are dozens of pages to click through to get back to where you were. How do I get back to the same page I was on?

    This is what I mean:  The users guide gives me all these instructions.  BUT, it does not give instructions to just STOP.  I don't
    Pause a song
    Tap .
    Resume playback
    Tap .
    Raise or lower the volume
    Drag the onscreen volume slider or use the iPad volume buttons.
    Restart a song or a chapter in an audiobook or podcast
    Tap .
    Skip to the next song or chapter in an audiobook or podcast
    Tap .
    Go to the previous song or chapter in an audiobook or podcast
    Tap twice.
    Rewind or fast-forward
    Touch and hold or —the longer you hold the control, the faster the song rewinds or fast-forwards.
    View album art full-size
    Tap the album cover when playing a song.
    I don't want to pause, resume playback, restart or any of these things.  i just want to STOP.  How do I do that?

  • How do I get back to the first page of an application when I'm in the middle of it?

    I'm sure there's an easy answer for this, but I can't find it.  If I'm in the middle of an application, say iBook, and I want to get back to the first page of that application, how do I do it?  When I tap on HOME, I go back to the home page with all the icons.  I want to go to another page within the application I'm in?  I've been stuck in iBook for an hour.....I don't know how to get back to the first page in that application.  Thanks.

    The shelves should show the ibooks that you've got in the app i.e. your downloaded purchases from the iBookstore. At the top of the shelves there should also be a Store button (for browsing, purchasing, re-downloading books from the iBookstore), and Collections (where any PDFs that you've synced/copied into the app go).
    There is a chapter on the iBooks app in the manual, which can be downloaded from here http://support.apple.com/manuals/#ipad

  • If I open another URL from my homepage, the "go back one page" button is grayed out so I can't get back to my home page.

    This problem only started recently.
    Opening another web page (URL) from my homepage always opens in the same tab and the "go back one page" button is gray and does not work. If I open a series of web pages in the same tab the green "back" button is green. Clicking on the "recent pages" down arrow will allow me to go back, but only to the page after the home page.
    In other words, after browsing, I can get back to the opening page (my home page) only by clicking on the house icon but not by using the "recent pages" function.
    Is there an option that changed after the last update?

    Do you see any tab history if you right click the Back or Forward button?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Can't get back to root welcome page while logged in as administrator

    Greetings all,
    Something weird has occurred with our iTunes U channel. If I log in as primary administrator, I have access to the tools for creating dependent welcome pages. If I create a new dependent welcome page, and then click on the new welcome page to navigate to it and edit it, I get told "This page has no content. Click to edit".
    Once I'm at this point (whether I edit the new page or not), I can no longer return to the root welcome page as an administrator. The "Back" button is greyed out. I can get back to the root welcome page as a non-admin user, for instance by clicking the name of my institution in the top right hand menu bar. This gives me an outdated root welcome page without any of the standard administrative links in the top right-hand corner, and there is no "Click to Edit" link.
    In order to get back to the root page as an admin, I have to go back to the Admin login page in my browser, and go through the whole process of logging in again.
    Has anyone had any experience with something similar happening to them? If so, how did you resolve the problem?
    TKA for any assistance,
    Erik Norvelle

    After you resetted your router you should try adjusting the wireless settings on your router...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    -Here select manual configuratioon...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
    NOTE : Passphrase should be more that 8 characters...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation...
    Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...See if you get the desired speed...If not you should un-install and re-install the wireless adapter...

  • How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

    how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
    it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
    the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
    what can i do...help!

    I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
    Yesterday I updated to 4.3.4  I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

  • How to get backed up data in iphone3gs when the phone is disabled

    how to get backed up data in iphone3gs when the phone is disabled

    can someone help? this is shaking my trust in icloud backups.
    i am on iOS 6.1.

  • I am a new iPad Air user. How do I get back to the home page with all the icons.

    I Am a new user. How do I get back to the home page with all the icons.

    iPad Manual
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • How i cen get back deleted data from the bin?

    how i cen get back deleted data from the bin?

    Not once you have put the data in the trash and pressed the button to delete it.
    There may be some hope if you can understand what I am telling you in my first post to you.
    Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot.   There are no formal instruction manuals for Time Machine.
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files           This in particular
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine

  • Back button does not work with some web sites to return me back too Firefox main page after concluding business on site.

    After connecting to a web site and completing tasks, I use back button too return too Firefox main page. After using back button to get back to the original site log in page the back button (after repeated uses) will never get me off the web page and back to the Firefox main page. At this point the only way too get back too Firefox main page is too shut down Firefox wait 60 seconds and restart Mozilla-Firefox.

    Some web pages are coded to redirect you forward to another page. In that case, when you go back to the page, Firefox redirects you forward again.
    To bypass this, use the history drop-down next to the back and forward buttons. The drop-down has the most recent pages on top, and older pages below. Jump as far down the list as you can, then repeat as needed to get back to the first page.
    Does it work?

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • How do i get back my stateful session bean after it has been passivated

    hi ,
    How do i get back my stateful session bean after it has been passivated by container.
    i'm confused that is it possible or not .......give me answer
    i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
    now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
    java.rmi.NoSuchObjectException: no such object in table
    java.rmi.NoSuchObjectException: no such object in table
         at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
         at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
         at sun.rmi.server.UnicastRef.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
         at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
         at $Proxy1.makeNewAcc(Unknown Source)
         at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

    Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
    Chuck

Maybe you are looking for