Unable to get Blue Tooth working on X60 Model 6363 - tried everything

1. FN+F5 only shows WWAN, no Blue Tooth transmitter shown (slider switch is ON, latest driver installed)
2. No Blue Tooth device shown under Device Manager
3. Blue Tooth service is running
Windows Vista, latest Bios, latest drivers.
I know it's something I am doing wrong, but I cannot figure it out. 

Have you installed this firmware update?
http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-64741
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • PLEASE HELP ME??? Lost itunes trying to downgrade back from 11.0 & unable to get itunes to work at all now..

    New Itunes setup is the worst one yet!!! I couldn't stand it, so I tried uninstalling it and reinstalling older versions, but now I am unable to get it to work in any version. I have uninstalled & reinstalled several times (trying this with multiple versions). Strange thing is that ever since I uninstalled 11.0 I have not been able to get any of the other versions to open at all.. Sometimes an error message box dings & pops up that says something about how to adjust the volume through your itunes, or unable to open file.. other times when I click on the icon it just does absolutely nothing. WILL SOMEONE PLEASE HELP ME??? I'm going crazy without my music & I am panicking because I am afraid I may have lost all music (I have thousands & thousands of songs on there).. I'm hoping to find a way to reinstall an older version, but at this point if I can't find a way to bring back the old version, I'll take 11.0 if I absolutely have to (meaning if it's the only way to retrieve itunes without losing my entire library)

    Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

  • Unable to get Phone Dialer working

    Hello everyone,
    I have setup a brand new client. And I am unable to get the dialer working correctly.
    I have followed the directions here: Re: The Top10 most frequently asked questions and answers (FAQ) January 2009
    - Telephony service is started
    - Windows XP Phone and Modem settings correctly configured
    - Phone Dialer does work and does show the progress of the "manual" test call
    - Phone Dialer is running and minimized
    - SAP/b1 General Settings/Service is setup with an area code.. nothing needed for an outside line
    When I pull up a Business Partner and hover over a phone number, I hit CTRL+TAB and nothing happens... the next field is just highlighted and no dialing occurs.
    Any thoughts as to what I'm missing to get this working correctly?
    All input is welcome.
    Thanks!
    ~ terry o.

    Finally got this working. Please setup your dialer using these directions;
    - Telephony service is started
    - Windows Phone and Modem settings correctly configured with any required settings like area code or country
    - Run Phone Dialer (dialer.exe) and confirm it does work and does show the progress of a "manual" test call
    - Change SAP/b1 General Settings/"Service" is setup with an area code.. and outside line requirements
    Open SAP/b1 and hover your cursor over a phone number. When the "phone" icon is displayed, press "CTRL + double-click".
    The dialer should open and you should see the progres of your call.
    Good luck!
    ~ terry o.

  • Currently working on OpenSPARC. Unable to get ModelSim for working on Linux

    We are working on OpenSPARC. We need to get ModelSim to compile the code in Verilog. We are unable to get ModelSim to work on Fedora Linux Version 9, as ModelSim only works on Windows.Is there a way to get Modelsim for Fedora Linux version 9.
    Regards,
    K.Pradheep Kumar
    19.08.08

    They have a Modelsim LE version for Linux. Check this out:
    http://www.model.com/products/default.asp

  • I am also unable to get the 551L working with Windows 8 Beta 1. Any advice?

    I am also unable to get the 551L working with Windows 8 Beta 1 and Mac OS X 10.8 Mountain Lion Developer Preview 2. Any Advice?

    It should be noted that I was previously in those Windows Beta's and I am also a member of both Microsoft Technet (Retail Subscription), and all 3 Apple Developer Programs (IOS, Mac and Safari), which is the reason why I am running Microsoft Windows 8 Beta 1 on 2 of my 3 Dell's (the oldest one has Microsoft Windows XP Service Pack 3 and Microsoft Office 2003 on it, which is the PC that I am using the 551L on), and the Mid Year 2010 Apple Mac Mini has Mac OS X 10.8 Mountain Lion Server Edition on it (something that I am technically am NOT supposed to be talking about here due to my NDA so this will be the last time I mention it here (as you can see I am known for being the type of  Computer Nerd that loves Alpha and Beta Testing)! :-)

  • I am unable to get my bluetooth working message says "make sure car mutli media is in range" how do I get connected?

    I am unable to get my bluetooth working on my phone. the message says "make sure car mutli media is in range" how do I get connected and what does that mean?

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I am unable to get quicktime to work in IE10

    I am unable to get quicktime to work in IE10 each time it just redirects me to the quicktime download, I've uninstalled and reinstalled quicktime, I've done a reset on IE, tried unchecking ActiveX filtering...Any other ideas?

    I'm working my way through Dreamweaver CC Classroom in a Book. The template in the exercise I'm trying to complete has sections that you can edit and those that you cannot. The links involved are to buttons in the non-editable sections. Since they're non-editable, you can't employ Property Inspector to alter content in those sections. I surmise that the through the Assets Panel approach is supposed to give you the capacity to add hyperlinks to those sections. Double clicking the template does not give you access to those non-editable sections. I've tried that along with a number of other circumventing the Assets Panel approaches. I've dug up a verson of the template from an earlier exercise that doesn't have any non-editable sections and the Property Inspector works fine. With some fumbling aboutI 'm sure I could go right to the code as well.
    Ultimately, I don't think I'll have any difficulty with my project working around the Assets Panel. The deal is... it's supposed to work... and it doesn't. And being blown off by support really ticks me off. I'm sure yoou understand.
    Thanks for your time and effort on my behaf. Being a really stubborn son of a *****... I'll probably keep after this until I get an answer... whether I ever need to use the Assets Panel or not.
                                                                Thanks again.

  • When i try and answer a call, i cant hear on the phone, the speaker phone works and the blue tooth work but not the phone.

    when i try and answer the phone, i cant hear anything through the phone. the speaker phone and blue tooth work fine.

        Help has arrived, julie_s! I apologize for the delay as I understand how time sensitive this situation is! If you still need assistance with activating the device I have started following you so please follow back and send a Direct Message to review account details.
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. It does not have a wifi or hotspot facility.  Can the same internet through blue-tooth work for ipad2.

    My htc-phone provides internet facility through cable/blue-tooth to my windows notebook. My htc-phone does not have a wifi or hotspot facility.  Can the same internet through blue-tooth work for ipad2?

    No, the bluetooth profile in the iPad does not provide that
    capacity. Can your netbook be a wifi transmitter? If yes,
    you can connect to the internet via htc-phone and pass
    the connection to the netbook which will connect via wifi
    to iPad. I am not familiar with the hardware in netbooks nor
    the capabilities of Windows, so what I am suggesting looks
    good in theory but the reality may not allow it. Still worth
    checking into.

  • Can I get blue tooth function for my headset to my macbook pro

    can I get blue tooth function for my headset to my macbook pro

    This is the Using iPhone discussions area.

  • 4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Unable to get following example working

    http://java.sun.com/products/jlf/ed2/samcode/textme1.html
    i am unable to get this example of file menus working.
    i have created a new project in JBuilder called TextMenu.jpx
    i have altered the project properties to look for TextMenu as the main method but it gives me a compilation error:
    "java.lang.NoClassDefFoundError: TextMenu
    Exception in thread "main" "
    can anyone else get this example working???

    Hi there,
    OK So its been two years since the last reply to this thread, but just incase anyone else out there is having problems with getting this example working in JBuilder here is how we did it.
    First off remove the "package samples;" line from the top of the .java file
    then locate the following line
    resources = ResourceBundle.getBundle( "samples.resources.bundles.TextMenuResources", locale);
    and change the part in the quotes to just "TextMenuResources".
    Finally open the samples.jar file and extract the file "TextMenuResources.properties" to the class folder of the project you are working on (for example if your project was called "TextMenu" then locate the "\TextMenu\class" folder and extract the file to there).
    Then compile the .java file in jbuilder and it runs, hopefully.
    I'm guessing there are easier ways to achieve a working state, but i had to get this working on a college computer with a variety of security precautions in place (including no command prompt, and no control panel which makes altering the classpath environment variable hard unfortunately).
    Hope that this helps someone.
    Sheepy / Andy

  • Nokia PC Suite - File Manager - Unable to get Blue...

    Running Nokia PC Suite 7.1.180.46 on Windows 7 Home Basic. Able to perform export of contacts and messages from my nokia 7230 using CA-101 cable.
    But when invoke File Manager, getting the message "Unable to get Bluetooth FTP Remote Folder Content. Please check that your device is turned on and working properly.".
    Under Settings --> Manage Connection, only USB cable is ticked.
    Can someone help me? Thanks.

    Am worried recharging my phone cause if do after few minutes the air time disappears thats if i do not make call immediately. Yea my browsers are on. Pls help me

  • Why doesnt my blue tooth work

    my blue tooth is not working for my second generatoin ipod why?????

    stevejobsfan0124 wrote:
    The iPod does not support hands free devices like Bluetooth headsets. That is on the iPhone only. Bluetooth on the iPod touch can be used to connect to another iPod, phone, tablet, computer, or a wireless keyboard, stuff like that.
    Those statements are incorrect.  The following is a C&P from the iPod Touch user manual:
    Bluetooth devices
    You can use iPod touch with the Apple Wireless Keyboard and other Bluetooth devices, such as Bluetooth stereo headphones. For supported Bluetooth profiles, go to support.apple.com/kb/HT3647.

  • HT2213 I am unable to get this to work. Anyone have success on this?

    I recently had a firmware update go bad on me. I did as it said and it flashed the led and beeped once and the screen remained black. After a long time with nothing happening I shut it down and tried again but this time got the 3 quick 3 long 3 quick beeps/flashes. I downloaded the firmware restoration cd and I am unable to get the cd to work. My mac is a macbook core duo and I have both the restoration cds 1.3 and 1.4. Neither work. I would appreciate any help.

    Never mind. I found out that there isnt a disk for this model yet.

Maybe you are looking for

  • How do I uninstall youtube on the IPAD os5.1?

    I am helping a friend with his IPAD and he wants to uninstall the youtube app but there isn't any way to do that. its a os5.1 and it doesn't even show the youtube in app list when I hold down the icon and it jiggles it doesn't have the X in the corne

  • Any Security Settings on Wireless WRT150N Router?

    Is there any way i can set up a password or any security settings on my router if so please tell me how. And i read over the FAQs, sorry if i missed it but i didn't see this question there.

  • Testing ActionScript classes with native methods?

    Hi, I have an ActionScript class that I'm writing and would like to test using FlexUnit. The only issue is that the ActionScript class has a member in it that is a class with native methods. So, I get the following error when trying to run a test of

  • Use "-Xmx128m" in a WebStart?

    we know you can use '-Xmx128m' in java or javaw application,but how do I use this para in a javaws(webstart) program?now my webstart program need more jvm memory but I found javaws cannot use this para,how can I do?

  • Isolated dual boot with OS mavericks and mountain lion

    I just created a dual boot between mavericks and mountain lion (1 physical drive with two partitions) but I'm having troubles where they each see each other.  Bin/ lib/ etc are fine (i think) as they are added via environment vars but it seems as tho