Unable to get login page after applying the 12.1.3 patch

Hi
I had applied the 12.1.3 patch 9239090. Just getting blank screen.
Please advice me how to trouble shoot the login page in r12
Thanks
Reddy

Hi Hussein
Thanks for the excellent document.Here is the result of the url's
Working Fine
http://<server>.<domain>:<PORT>/OA_HTML/ServletPing
http://<server>.<domain>:<PORT>/OA_HTML/jsp/fnd/aoljtest.jsp
Failed the following
http://<server>.<domain>:<PORT>/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGE
http://<server>.<domain>:<PORT>
http://<server>.<domain>:<PORT>/OA_MEDIA/FNDLOGOL.gif
http://<server>.<domain>:<PORT>/forms/frmservlet
http://<hostname.domainname>:<port>/OA_HTML/fndvald.jsp?username=sysadmin&password=<sysadmin_password>
Should I paste the log files here.
Thanks
Reddy
Edited by: Reddy on Jun 26, 2011 9:32 PM

Similar Messages

Opens Webmail login page instead of sso login page after changing the webma

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Unable to open BPM Workspace after applying 11,1.1.5 patch BPM PS4 FP

After I login to BPM Workspace(http://<host>:<port>/bpm/workspace) , I get a blank page.
The logs show the following error -
javax.faces.FacesException: javax.el.PropertyNotFoundException: The class 'oracle.bpel.worklistapp.tasklist.beans.view.TaskView' does not have the property 'homePageLeftAccordion'.
at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:261)
at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
We applied a patch to the 11.1.1.5 SOA installation to prevent an issue from occuring . After that we are getting this issue.
Interesting thing is that the URL - http://<host>:<port>/integration/worklistapp/ works fine.
Can someone please suggest what might be wrong ?

We were able to get to the BPM workspace after implementing the Post Install steps as mentioned here - http://www.oracle.com/technetwork/middleware/soasuite/documentation/bpm-postinstall-ps4fp-487857.pdf
But getting some DB related errors after loggin in , checking if MDS Schema migration has been done properly.

Unable to get to page 2 of the BIOS configuration on R200

I have a Portege R200 that needs to be reinstalled, but I am unable to navigate to the second page of the BIOS to change the boot sequence. Using pgup/pgdn does nothing as well as every other key sequence I have tried including F12 and holding down 'C' at startup. I have even tried removing the CMOS battery and shorting out the reset soldier points on the motherboard for 30 seconds as suggested by my research. In addition, I have attempted flash the BIOS using the latest available download from Toshiba, but I was confronted with an error message stating that I am not authorized to perform the upgrade and I need to reboot and try again with supervisor permission.
Currently I can boot from USB/CD-Rom only when the hard drive is disconnected which doesn't do me any good. Being that the Hard drive is a 1.8" and I don't have an adapter for it, there isn't much I can do with it. Any advice I can get will be much appreciated.

Hi Narendra,
The below are standard Cause and action
Cause
The report contains structural errors. This means that Web Intelligence cannot decode the report and display the results.
Action
Do one of the following:
View the report in Structure View and verify the report structure. For example, errors can be caused if report blocks overlap or if the structure of a table contains cells that create an asymmetrical table format. Modify the report structure appropriately.
Contact your administrator and request them to search for structural anomalies in the report.
I have seen this error in my experience in the below cases, it definitely is related to structure.
Reports with merged dimensions where blocks with incompatible objects placed in structure mode, are previewed for results.
Reports with sections where some sections created are no longer valid objects in the report.
You can duplicate the report keeping it in structure mode and then preview results, if it still throws error and does not display, then have to investigate the block/object/cells of the structure that is causing this issue by deleting one by one from duplicate report and preview results repeatedly, that way wherever you get right preview, the deletion before that is the affecting block/object/cell.
Thanks
Arvind Shukla

Tree Table icons not getting cleared even after applying the CSS

Hi,
I need to change the tree table expanded and collapsed and the lead node icon.
Leaf node icon is getting changed properly but the remaining two are appled improperly.
In the background the old default image is getting redered and on top of that the newly given image is shown.
These are .css statemets used for changing the icons.
af|treeTable::expanded-icon{content:url(/org/calwin/ui/superweb/image/yellowBlueMarker-minus_trans.gif);
background: none ;}
af|treeTable::collapsed-icon{content:url(/org/calwin/ui/superweb/image/yellowBlueMarker_trans_plus.gif);
background: none}
af|treeTable::leaf-icon{content:url(/org/calwin/ui/superweb/image/blueCircleMarker_trans.gif);
background: none}
Can someone suggest a solution for this.
Thanks,
Praveen.

Hi Frank,
I tried including -tr-inhibit:all;
but it didn't work.
Here's my skin registration tag in trinidaad-skins.xml
<skin>
<id>customSkin.desktop</id>
<family>CustomSkin</family>
<extends>fusion.desktop</extends>
<render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
<style-sheet-name>org/calwin/ui/superweb/skin/css/customFusion.css</style-sheet-name>
</skin>
Can there be any other reason for not being applied properly.
The images mentioned in the css are properly rendered but in the background
default images are still coming.
Please suggest..

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

Not able to get the login page after installing 12.1.1

HI,
i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
Thanks,
venkat.

Hi,
What is the OS?
What is the error message?
Any errors in Apache/Database log files?
Thanks,
Hussein

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

After applying the patch showin error in pages

i applied one patch yesterday which size was 1.5mb i applyed that as hot patch after applying the patch when uer want to open the front end it showing this error that
ORA-04063: package body "APPS.ARPT_SQL_FUNC_UTIL" has errors
FRM-40735: WHEN-NEW-ITEM-INSTANCE trigger raised unhandled exception ORA-06502.
when i am clicking the recevable manger form.any body help me here.
This is the patch number 4727382

They meant to say that the instance is screwed up. You need to clone from your PROD.
Please check the below doc's for cloning procedures.
Note:216664.1 : FAQ: Cloning Oracle Applications Release 11i
Note:406982.1 : Cloning Oracle Applications Release 12 with Rapid Clone
Note:230672.1 : Cloning Oracle Applications Release 11i with Rapid Clone
You'll find many thread's on cloning in oracle forums. they could be handy.

Redirecting user to login page after session expiry

Hi,
Default session expiry implementation in sap EP6.0 doesn't work properly. To overcome this, we have implemented one component where we check the idle time and throw the user back to the login page if the idle time has exceeded the session expiry period. This component has been added to desktop inner page as an iView. Following is the logic put in this component.
IAuthentication ia = UMFactory.getAuthenticator();
ia.logout(httpRequest, httpResponse);
httpResponse.sendRedirect("/irj/portal");
We are successfully getting the login page after session expiry. Issue is, our portal server is running on 11111 port. We cannot change this to 80 on unix because of unix limitations for the port number. So we have put one apache web server before our portal server. Apache web server is listening on port 80 and forwarding the request to our portal server.
Now when user is redirected to the login page, url being shown in the browser is http://<host_name>:11111/irj/portal but I am expecting http://<host_name>/irj/portal (without port). I have tried putting the full url in sendRedirect() method but that too doesn't work.
Any help is highly appreciated.
Regards,
Chandra

Hi Chandra,
Let the URL be relative in the sendRedirect i.e.
httpResponse.sendRedirect("/irj/portal");
However since you have a Reverse proxy in front, the response header for redirect will not contain the address of the reverse proxy in this case, your servername without port. You have to properly configure your reverse proxy so that the HTTP Headers are changed properly before sending the response to the users.
Check this URL,
http://httpd.apache.org/docs/1.3/mod/mod_proxy.html#proxypassreverse
This gives you the details on configuring your apache.
Hope this helps.
Ankur
P.S. If this helps please reward points.

EQG-30276 Unable to fetch login page

I have set up a portal source, created a user in portal with view priveleges, succesfully registered the OID identity management plugin.
But when I attempt to crawl the portal source, my crawl fails with the above message in the log. It displays the url it is attempting to fetch, and the url displayed is not our login page. There is a custom login form at this site. Is this the issue?
The log is as follows:
EQG-30276: Unable to fetch login page
EQG-30025: https://test-sso.<removed>.com/pls/orasso/orasso.wwsso_app_admin.ls_login?site2pstoretoken=v1.2~DE163018~99DDE599DEFD2008E680EF5788E480B7064256ECFB58461AE39D93D6FD3FE4B5D9E6D3D2999BFF44D0C6E9F0E092C69625990CB3D0CCE46061F69A2CAC97D2CA63692C981879F25C57B714FF2E78AB6F14C3648A9560EE07CC585404C08C585FDACD12BCFE09D6DBBAAB881DFCC8268851B0834141B66490E76C21D7CB7E967E331839C221BE7ECAF158E6EB172F35FC12C45B7DB67D5B29544E934B93CB64822DF303A295A0AC5A2C8B43E78
I removed the domain name.
If I copy this url to a browser window, it fails as well. If I remove all but the base url (before orasso.wwsso_app_admin.ls_login), can at least get to the SSO home. Like I mentioned, we have a custom login form.
Can I configure the Id managment to go to the custom form, or do I need to create a new Id management plugin?
Thanks for any help!

I have made a little progress on finding the answer to this, but would like a second opinion before I have our SA go down a path.
It seems that we are have a problem with our certificate. If I paste the url into the browser, it returns a message saying that there is a problem with the certificate and asks if I want to continue. If I continue, it goes to the custom login page.
Could the certificate issue be causing the problem I am seeing? I think it is, but would like a second opinion.
Thanks

OIap AW are Invalid after applying the Oracle patch 9.2.0.6

Hi
We have applied Oracle patch 9.2.0.6. after applied the patch we are not able to connect with AW might be all AW are invalid.
i am getting the following error :
ava.sql.SQLException: ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_AW", line 18
ORA-06512: at line 1
at oracle.olap.awm.businessobject.aw.WorkspaceBO.getWorkspacesAttachedBySchemaUsingDML(WorkspaceBO.java:623)
at oracle.olap.awm.navigator.node.aw.SchemaNode.getChildren(SchemaNode.java:87)
at oracle.olap.awm.navigator.node.BaseNodeModel.refreshData(BaseNodeModel.java:74)
at oracle.olap.awm.navigator.node.BaseNodeModel.dTreeItemExpanding(BaseNodeModel.java:221)
at oracle.bali.ewt.dTree.DTreeDeferredParent.__fireExpansionChanging(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.setExpanded(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.expandHelper(BaseNode.java:1527)
at oracle.olap.awm.navigator.node.BaseNode.access$000(BaseNode.java:85)
at oracle.olap.awm.navigator.node.BaseNode$ExpansionThread.run(BaseNode.java:1488)
Any idea or thought would be appreciable.
Thanks
Anwar

Please file a TAR with support to resolve this issue.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

HOW to find out the tablespace space utilized by a patch after applying the

someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PM

I think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein

Error in BPLE CONSOLE after applying the patch 10.1.3.3.0

Hi,
Since my old version of my soa suite is 10.1.3.1.0 and I applied the patch set(10.1.3.3.0). It changed to 10.1.3.3.0, but when I click the Activity tab of my Bpel Console and checked it for activity states its showing the below mentioned error.
My operating system is windows XP and I also run the upgrade script mentioned in the readme document of the patch set. I don't know what need to be done?
Please help me on this issue.
Error Message:
Build Information:
Oracle BPEL Server version 10.1.3.3.0
Build: 0
Build time: Fri Jun 15 06:05:31 PDT 2007
Build type: release
Source tag: PCBPEL_10.1.3.3.0_GENERIC_070615.0525
Exception Message:
[javax.servlet.ServletException]
Cannot find work items.
An attempt to fetch the work items using the where condition "" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_wi WHERE ci_domain_ref = 0 ORDER BY wi_modify_date desc
Exception Trace:
javax.servlet.ServletException: Cannot find work items.
An attempt to fetch the work items using the where condition "" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_wi WHERE ci_domain_ref = 0 ORDER BY wi_modify_date desc
     at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:866)
     at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:813)
     at ngActivityList.jspService(_ngActivityList.java:611)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:453)
     at activities.jspService(_activities.java:427)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Hi Marc ,
Thanks for your reply.....
Did you mentioning the script (upgrade_10131_
10133_oracle.sql) in the orabpel. I had run this script after applying the patch.
Still iam facing the same issue.
what need to be done?
Could you please help me on this, because I need to do the Fault Handling Framework in BPEL and so i need the faultpolicy folder to be present.
Since I got the folder by applying the patch, but what happend is when i try to check out for the activity status in the BPEL Console Activity tab it is showing the error as mentioned earlier. Any problem with patch implementation or any bug is there. So far i done the patch installation successfully without error and i upgraded the orabpel schema using the mentioned script also. Any other things i need to do?
Regards,
Ashok.

Unable to get login page after applying the 12.1.3 patch

Similar Messages

Maybe you are looking for