Unable to get mouse (USB) or serial working.

I have a MSI 865P board.
Ive tried all drivers ive seen this far and am unable to get a USB installed or serial working. Any ideas?

Well due to the Weak PSU it is making it very difficult for allof your Componants to work together under some Load, as when installing windows, your memory is not recieving enough Power, so therfore the OS is Not installing Properly....The only thing that you can do to remedy the Situation is to Replace the PSU, with a Quality, More Powerful, PSU such as a Enermax 465Watt, or a Antec 480 Watt, Unit Because for about $99US you can get a PSU that you wont have to worry about replacing until you forgot how long you have had it........And the Funny thing is, That the PSU is the Most important componant in the PC, if it does not work, or work well, then rest assured nothing else will ...Plug all of your individual componants into this, and you will be amazed on how much Power you really need >>>>>>> http://www.adecy.com/psu/ ....................Sean REILLY875

Similar Messages

Photoshop elements 12 Unable to get the sharing (email) to work.

Hi, The sharing (emailing) feature talks about using other email client but can not??? I have Outlook 2013. the other option is to use the adobe email service that needs to verify the email that I am using but does not send the verification code that I need to activate the feature. I have Windows 8. Elements Organizer 12.0.0.0
Core Version: 12.0 (20130903.r.43239)
Language Version: 12.0 (20130903.r.43239)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 43.1MB
Catalog Cache Size: 187.1MB
System:
Operating System Name: Windows 8
Operating System Version: 6.2
System Architecture: Intel CPU Family:6 Model:5 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 7.9GB
Free Memory: 4.5GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 11.0
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (MATSHITA DVD+-RW BUS: 2 ID: 2 Firmware: UJ8E2)

Thank you very much.
AL
From: Bill Hunt [email protected]
Sent: Tuesday, January 28, 2014 2:22 PM
To: aladvantage
Subject: Photoshop elements 12 Unable to get the
sharing (email) to work.
Re: Photoshop elements 12 Unable to get the sharing (email) to work.
created by Bill Hunt <http://forums.adobe.com/people/the_wine_snob> in
*Premiere
Elements* - View the full
discussion<http://forums.adobe.com/message/6061690#6061690

Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it says it has been installed. Where should I see that it is installed. Where do I find it?

Hello, I have a new Mac Book Pro and I am unable to get Adobe flash player to work. When I install it it says it has been installed. But where do I see the application that it is there?

Check your system preferences.
My copy of flash installed as a preferance pane.
If its there you will be able to check the current installed version and set preferences for flash and updating.

Help needed getting a USB to serial adaptor to work

I have a new Mac Mini but an not getting my serial adaptors to be seen by the OS (10.7)
Any ideas please

Here’s a way to get you PL2303-based Serial-USB adapter working with OS X Lion (10.7). Based on the osx-pl2303 project on github, I’ve built a kernel extension that works with OS X Lion. You can grab the kext file here or from the link below.
Installing the kext file can be done in a few easy steps:
download and extract
cd /path/to/osx-pl2303.kext
cp -R osx-pl2303.kext /System/Library/Extensions/
next you need to fix permissions and execute bits:
cd /System/Library/Extensions
chmod -R 755 osx-pl2303.kext
chown -R root:wheel osx-pl2303.kext
cd /System/Library/Extensions
kextload ./osx-pl2303.kext
kextcache -system-cache
Good luck!

How to get wireless usb adapter linksys working to get on internet?

Hi, does anybody know any general way to get my linksys wireless g usb adapter to work on Solaris 10? I plug it in and nothing happens. This is a question
Edited by: Usulyre on Nov 4, 2007 9:56 PM

A general option would be to search the HCL on bigadmin.com and buy/swap/barter for a supported adapter.
Another option is to switch to OpenSolaris and search the aforementioned opensolaris community for supported hardware and then buy/swap/barter for supported hardware.
alan

Unable to get Linksys smart wifi to work...I NEED HELP!

I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account. NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1. Any help will be most appreciated! Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-) Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...

Homegrown619 wrote:
I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account. NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1. Any help will be most appreciated! Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-) Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...
Any progress on this?

Flash CS5 Unable to get AS3 Code Hinting to work

I have a trial version of the Adobe Flash CS5 installed on my machine and I am unable to get code hinting to work when I'm working on AS3 files.
I've tried doing the reg fix from Lee's blog but still can't get it to work. I've also tried deleting the Flash regkey and the configuration folder but still can't get it to work.
Specs:
Windows 7 64
Intel Core 2 Duo E7200
4GB RAM DDR

Hi
I got the exact same problem.
I just received my CS5 web premium package and installed it.
For some reason, the code hinting feature does not produce anything.
It is possible to popup a general code hinting list by using CTRL+Space other
than that I get nothing.
Normally by using suffixes such as _txt, _mc etc, this should enable the
code hinting, but this does not happen.
Is it possible to break the code hinting, by installing CS5 to a different partition other than the primary (C:\)?
Before you ask: I'm not using external as files in my test. It is a simple FLA
file, which contains a classic text only.
The use of the . (dot) does not produce anything at all.
I hope some kind soul can tell us, what's happening since a lot of prople DO
apparently get code hinting.
Any help is much appreciated
Best Regards
Peter

Keyboard, mouse, usb, bluetooth stop working, computer freezes

I have a 2009 MacBook Air. Over the weekend, out of nowhere, the computer froze up where the keyboard and mouse would not work. Plugging in a USB device and/or trying to use a previously paird BT device also failed.
I was, however, able to remotely access the computer since I had previously set it up with LogMeIn. By doing this, the computer had full functionality but external peripherals were not recognized.
Using the remote session, I was able to fire off a backup and send it to a network drive (which was an overnight task, but at least I still have the latest data).
I took it to the apple store and, upon starting it up, all worked fine! We restarted it at the genius bar and the problem occurred again. When the logon screen appeared, the mouse and keyboard were unrespnosive. Restarting holding down any optoin+Key combos did nothing because they keyboard was not being recognized.
Then we restarted again and it worked.
So, basically, the problem is interemittent. They offered the repair depot flat fee cost of $280 that would fix the unit no matter what part(s) had to replaced. It's looking more and more like a logic board issue, but it doesn't make sense that it's only some of the time and others it works fine. So I took it home to try a few more things.
I was able to get it started up using command R and did a full disk erase, followed by a Mountain Lion re-install. I also did a NVRAM reset. That seemed to work for a few minutes, but then it froze up again, although Mountain Lion kept running the install. Once the install finished, I force shut down the unit and started it up again and the keyboard/mouse were working again.
I plugged in an external USB drive, configured bluetooth and started restoring files. It worked for a full day and then the next morning, it happened again. At this point, the keyboard/mouse froze, the bluetooth devices became disconnected and the USB drive dropped - all at the same time.
So, a full reinstall of the OS didn't work (I was somehow hoping this was software related).
Any other thoughts? Should I bite the bullet and just do the flat fee repair?

HI,
Try resetting the SMC, instructions here. http://support.apple.com/kb/HT1543
Try resetting the PRAM/NVRAM, instructions here. http://support.apple.com/kb/HT1379
Try deleting this file. com.apple.bluetooth.plist /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
Hopefully something will help.
Carolyn

Can't get Apple USB modem to work in Boot Camp

I've been struggling to get an Internet connection under boot camp/Windows XP for several days. Have an Apple USB modem and installed all the Apple drivers. Apple tech support says they can't help me with Windows (cop out). Both Microsoft and my ISP tech support team have both been great and have spent hours trying to help me. Their final conclusion is that the modem is working fine, but the underlying flaw is the inability of an Apple system to run Windows. In desperation, I've ordered a US Robotics USB modem from the Mac/PC Connection that is both OS X and Windows XP compatible. It is on backorder for 2 weeks
Any help you can give me in the meantime would be greatly appreciated! Glad I kept my old Dell!

"I am confused, QuickDraw. If the poster cannot get online via Windows XP, how does he or she get the drivers?"
I was speaking of the Boot Camp drivers that comes on the Leopard Disc. This could possibly be the answer to your troubles as well if you haven't already installed them yourself. After you've successfully installed Windows via Boot Camp, you need to boot up into Windows, then stick in your Leopard Disc and the drivers are supposed to install automatically. If after you've installed the BC drivers you still cannot get online via your router, then post back.
Hope this helps.
By the way, you really need to start your own thread. That way you'll have a better chance of being assisted from others. Just a suggestion.

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

How do I get GPIB USB-A to work in MAX 2.2?

I updated from LV 6.0 to 6.1. During the intallation MAX was updated to version 2.2. My problem is that my GPIB cark USB-A is not suported in MAX 2.2, I updated to 488.2 2.0 (W32) and I can now use my card within MAX again, but I cant use VISA aliases anymore. This is a problem since some of my older programs uses aliases for both instruments and COM ports. Is there an upgrade I can run or will I have to work without aliases?
Is it possible to uninstall MAX 2.2 and reinstall the old MAX from LV 6.0 and get it to work with LV 6.1?
Hope someone has a solution for my problem.

You do not NEED Max to set up aliases.
Check with NI support about editing Visaconfig.ini (?).
The aliases end up in that file.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Unable to get the SVG demos to work in mapinit.jsp

Hi forum
I've played a bit around with the Mapviewer demos for Oracle Maps. I have loaded the demo data in a database and done the setup as described in the setup. Everything works - except all demos related to SVG, like mapinit.jsp in this case. I've tried both version 10.1.3.1 and 10.1.3.3. I've tried this in misc. browsers, and here's what happens in each
IE7 + Adobe SVG Viewer: The SVG window is blank
Firefox 3: For Mapviewer 10.1.3.1, displays a "Malformed XML document error". For Mapviewer 10.1.3.3, wants to install an "Unknown plugin" which it then can't find, and doesn't display anything.
Google Chrome: Outputs an XML document as text in the SVG window
I have tried adding an entry to mime-types like "image/svg+xml svgz", but that didn't seem to change anything. No browser wants to display the SVG correctly.
Choosing "Regular image" for the same demo data works fine.
How do you get this to work? What am I missing? The appserver runs 10.1.3.4.
Thanks in advance,
Jacob

Hi Jacob,
Since Adobe dropped support of their SVG viewer, MapViewer SVG support has not been updated with the new features added. Therefore, do not expect to get in SVG, what you currently get with other formats. The minimum support initially added for SVG, is still there. We will check the demos.
Different browsers provider different levels (some rather incomplete) of support for SVG, and scripting with SVG is also done differently on different browser/platform, so this makes difficult to keep SVG support updated. You experienced these differences in your tests with different browsers.
Joao

How can I get a USB-8473 to work at 125kbps?

All,
I am using an NI USB-8473 high speed CAN card. I've plugged in into a known-good CAN port in a network that works fine at 500kbps with other CAN devices.
When I run the 8473 at 125Kbps, it works fine. When I run it faster than that, it does not work. It does not read CAN data, although the CAN LED does flash before an error (3FF6206B or other) is generated. When I try to write to the bus at speeds above 125K, the device appears to attempt to write once, then stop functioning.
Any help would be greatly appreciated.
Thanks!
Solved!
Go to Solution.

Although the network works with another interface at 500kbps, please check if your cabling meets the requirements for High-Speed CAN (page 4-4 of the NI-CAN Hardware and Software Manual).
Do you use proper cable termination as mentionned at page 4-5 of above linked document ?
Has the "know-good CAN port" an onboard 120 ohm termination resistor ?

Unable to get the form displayed in Working Time

Hi,
We are implementing ESS with ECC5.0 on EP6. When I go for Working time and click on Time Statement for a Chosen period .. below it doesn't display me the form needed.
I have checked from the Tx : HRFORMS, the Form Name :SAP_TIM_99_0001 & 0002 are active.
Is there anything else i need to configure at the r/3 end to get that display on portal?
Need help on this ..
Thnks in advance.
Vijay

Hi Aniket,
To the Clusters .. do you mean at the j2ee engine side?can you please give me info in detail
Thnx for valuable inputs
Vijay
Message was edited by:
NR

[TeX Live] Unable to get ConTeXt (Mark IV) to work

I would like to try out ConTeXt, but I can't get it to work. Trying to run "context my-small-test-file.tex" or "context --version" (or anything else I can think of) results in the following error message:
mtxrun | unknown script 'context.lua' or 'mtx-context.lua'
The TeX Live wiki page says "The ConTeXt formats (for MKII and MKIV) are not automatically generated upon installation. See the ConTeXT wiki for instructions on how to do this." I've searched, but I haven't been able to find any helpful info in the ConTeXt wiki. For example, here it is suggested to run "context --make cont-en" to generate a format file, but this gives the same error message as above. Trying texconfig is no good either; it says "texconfig formats is no longer supported, because manual edits of fmtutil.cnf will be overwritten by the new TeX Live package manager, tlmgr, which regenerates that file as needed upon package changes. Thus, to add or remove formats, the recommended method is to use tlmgr to add or remove the appropriate package." But I don't know how tlmgr works, and anyway I'm reluctant to use anything that might interfere with pacman.
No luck googling either... Suggestions, anyone?
PS 1. Are there any good reasons why the texlive-core package doesn't configure ConTeXt to work out of the box?
PS 2. I also tried context-minimals-git from the AUR, which kind of works, but it's useless since the integral signs ($\int$) don't look like they should and have a hideously large spacing around them...

Also, you can have multiple versions of TL installed if you like and switch between them. I like this because I can always fall back to the previous edition if something terrible happens to the latest one! (Especially when I'm installing a new release and don't know quite what will happen.)
I guess it doesn't seem like much hassle to me but I was managing TL with these tools before I started using Linux, so that might make a difference - it is easier, in fact, than learning to manage TL using pacman packages.
But the "do not run with root privileges" is what really decided it for me. I prefer not to manage the installation using tools with privileges which the tools' authors explicitly recommend against! (I guess if you don't need to run anything to manage the installation this might not matter, though.)
EDIT: By the way, I do this even though I pretty much install the lot so I certainly do not save space. But I have control and I know what the tools do and where they can do those things - only under /usr/local/texlive and /usr/local/stow-tex, basically. I manage the installation using a dedicated account which cannot write anywhere else besides world-writable directories such as /tmp. And it all seems to work.
The only tricky part was figuring out how to create dummy packages to keep Arch's pacman and Fedora's yum happy .
Last edited by cfr (2013-11-16 22:57:44)

Unable to get mouse (USB) or serial working.

Similar Messages

Maybe you are looking for