Unable to get my 1tb hd to show in windows on elitebook 8770w

Trying to add a 2nd H/D (1TB) on elitebook 8770w and it will not show in windows.

Hi:
Please see if the info at the link below is of help,
http://www.pcworld.com/article/159956/my_pc_doesnt_see_my_new_hard_drive.html
or see the answer with 21 votes in the green box to the right of it.
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-rc1-wont-recognize-my-...
If none of the above two work, try this:
Open "Administrative Tools"
Under Storage Choose "Disk Management"
Choose New Spanned Volume
Choose Layout Simple
Leave the settings alone and let it format
Paul

Similar Messages

I have been unable to get Photoshop Elements 11 to show in my Open With Programs

I have been unable to get Photoshop Elements 11 to show in my Open With Programs list. The program is installed but will not show in Open With programs.

Hi,
You don't say which operating system you are using so I'll assume Windows 7 for now - try this.
1) select the file that you want to open
2) right click on it and go to the Open With option but select Choose default program at the bottom of the list - the following should open
3) At the bottom of the list, there is Other Programs, you may need to scroll down. If PSE not in the list, continue with the following.
4) Use the Browse button to browse to the following (omit x86 if on 32bit system)
"C:\Program Files (x86)\Adobe\Photoshop Elements 11\PhotoshopElementsEditor.exe"
I'm assuming that you want to open the image in the editor.
5) Uncheck the Always use... option, otherwise double clicking on the file would cause the editor to open by default.
6) Click on OK
PSE should now appear on your open with list.
Good luck
Brian

I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8. Although it does work with the laptop using a ethernet cable. Has anyone else had this issue and can you please tell me how to resolve the problem?

Windows can have issues with the wireless name.
Make sure the name conforms to windows standard.
Short, 2-20 characters
No spaces,
Pure alphanumeric.
eg AEwifi is a good wireless name.
Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
Test also by removing the security and just see if you can connect if the short name doesn't help.
WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

BT Yahoo Toolbar - I am unable to get this to open, using Vista, however, have succesfully got it to show on my laptop with XP, using v3.6.8 of Firefox.

I am using Mozilla Firefox v3.6.8 with XP on my laptop and Vista on my desk top. I was asked by BT Yahoo to download the new BT Yahoo Toolbar. This I achieved on my laptop with XP, but have been unable to get the toolbar to show on my desktop using Vista. The file downloads and fails to create the toolbar.

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

I am trying to upgrade two MACs to Maverick. I have been successful with My Power Mac but unable to get my Imac to load. I am running Snow Leopard on the Imac. When I go to the App Store it shows that it has been downloaded. Any ideas? Any ideas

You stated; " I have been successful with My Power Mac "
A Power Mac is incapable of being upgraded to Mavericks. It is a PPC Mac which can only run versions of OS X up to 10.5.8 and no higher. Any version of OS X higher that 10.5.8 requires an Intel processor to run.
Does the iMac meet the hardware requirements for Mavericks?
Allan

I am unable to get airdrop to send photos from my iphone5. Recieving is not a problem but no one shows up in the airdrop box. bluetooh and wifi are enabled.

I am unable to get my iPhone5 to send photos via airdrop, recieving is fine.
Bluetooth and wifi are enabled.

http://support.apple.com/kb/HT5887?viewlocale=en_US&locale=en_US
This has solved the issue, The other device that i tried to pair with and use airdrop had no icloud account, trie wit another device and all ok.

Unable to get PDF to show up in Outlook

I have just reinstalled Windows 8 for the ?????? time, installed Microsoft Office and Adobe subscription. I am unable to get the PDF to become active in the Add-In's on Outlook. I have checked it on many times and it is just not there. These are the only two major program groups which I have reinstalled at this time. PDF was working before the last operating system crash. Has anyone seen this problem and if so, what did you do to correct it. I have a feeling that this is a bug assiciated with Windows 8. I have never lost operting systems as often as I have with Windows 8,

Make sure you've updated to Acrobat 11.0.1 because this was the first version to support the Office 2013 PDFMaker add-ons.

I'm unable to get iTunes to show my iPod Touch when I connect. Help!

Have connected and disconnected 4th gen Touch many times, rebooted pc, etc., and am unable to get iTunes to recognize the player. Help!

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Error while applying a patch "Unable to get the database connection"

Dear Experts,
A patch which got successfully applied is failing Production and the error is kind of surprising to me.
Apps version is 11.5.10.2
db version is 10.2.0.4
The worker log file shows
Time when worker restarted job: Thu Nov 24 2011 22:14:52
Start time for file is: Thu Nov 24 2011 22:14:52
adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
Calling /usr/java14/bin/java ...
Exception occured
              Copyright (c) 2003 Oracle Corporation
                 Redwood Shores, California, USA
         XDF(XML Object Description File) Comparison Utility
                        Version 1
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
AD Run Java Command is complete.
                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA
                                    AD Java
                                 Version 11.5.0
NOTE: You may not use this utility for custom development
      unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Thu Nov 24 2011 22:14:53
{code}
The error says database connection error. I am able to connect to the database using sqlplus. I tried to restart the failed worker, but the same error is repeating.
Any help would be appreciated.
Thanks
qARS
Edited by: user7640966 on Nov 24, 2011 9:07 AM

Hussein,
One thing which I noticed now is in the apps Tier the
tnsnames.ora under $TNS_ADMIN
shows entry like this:
PROD=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
            (CONNECT_DATA=
                (SID=PROD)
        )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
Any clue how this can be fixed?
Thanks
qARS

Sony DCR-DVD505 Handycam: Unable to get video clips, audio

Evaluating Adobe Premier. Hopefully helpful for other Sony DCR-DVD505 users.
Objectives:
1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
2) Drag and drop various clips into Sceneline
3) Insert menu markers
4) Burn DVD
Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
First Try: NO AUDIO.
The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording. After "finalizing" the disk, the media may be imported into the computer. Streaming was supported by Windows XP driver but is no longer supported in Windows Vista. In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive! So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files. Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting). Then opened up Adobe Premier Elements 8. Used get media to import all the MPG clips into "Organize". Dragged and dropped various clips...inserted a menu or two and...burned the DVD. PROBLEM: VIDEO OK, BUT NO AUDIO(?!). The MPG files on computer play fine (with audio) inside Windows Media Players. Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
Second Try: Capture VOB directly
Forget the camera. Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317. I loaded the VOB directly and dropped them into Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
However, File > Export is always GREYED out (unusable). And the status at bottom right seems to be looping on "Background Rendering". DO I WAIT? In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?!
Then I tried Prism (again as per the second forum post mentioned above). It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
Is this AVI conversion even a good idea? How would I get my clips back??
Bottomline. My mini-DVD and imported MPGs plays fine in Windows Media Player. However unable to extract the camera clips (with audio).

Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
I believe the 505 is basically the same camera, with some additional features.
This workflow worked for me in the past so I'll pass that along:
Sony Browser to PC as Mpeg.
Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
DV-AVI imported into PE7.
This should also work for PE8.
Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
I then load this DV-AVI into PE7.
(PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
Other options to try:
Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
Or load the VOB or Mpeg into PE, then use that to convert to AVI.
(Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
Post results, if any of this works for you...
Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

I am unable to get same preview image colors in Bridge and Lightroom

I am unable to get same file preview in Bridge and Lightroom. The Lightroom preview image (in both the Library and Develop) is more de-saturated. But the exported/saved jpegs match. If I try to match the Lightroom preview image to the Bridge preview image, the resulting Lightroom export colors are off. I have tried this with images with no changes and with changes and the result is the same. I have Lightroom 5.6 and CR 8.6. I am using the latest version of Bridge.
I contacted Adobe support and followed all instructions to try to fix but the problem remains. This comment was made after several solutions were tried, including updating Lightroom. :
Adobe: there would be little difference in case of preview of Bridge CC and Lightroom 5. However, after exporting it would be same. Both use different technology at the background and work in a different way. The preview which you see in lightroom is not the actual image but incase of Bridge you see the actual image ( original ). That's the reason there is a color variation between previews.
Me: But how can I then use the Lightroom preview to get accurate colors when processing a RAW file? If I do adjustments to the RAW file in Lightroom it looks different when exported. That doesn't seem to make sense when Lightroom is designed for photograhy
Adobe: Please check in develop module of lightroom.
Me: Nothing changes in the develop mode. The image looks the same as in the preview/Library mode.
This screenshot shows the unmodified images in Develop (Lightroom) and ACR (Bridge). The color differences are significant.
Lightroom exported jpeg file, unmodified from preview image in Develop (which looks like Bridge preview image not the Lightroom preview)
Bridge saved jpeg file, unmodified from preview image in ACR
Any suggestions on what I need to do to Lightroom to make it show accurate colors. If not, I don't see any point in using it to process files.
Thanks, Marie

Bridge is just a browser. It displays according to the embedded color profile but assumes sRGB for all untagged images.
In Lightroom library previews use Adobe RGB and in Develop the working space is Pro Photo RGB.
The real question is why use both Bridge and Lightroom. Stick to one, not both.

Several applications including Settings open and close immediately, unable to get iTunes to install an update

While traveling in China, I was unable to get latest iTunes download an update to 4.3.2 (after download is compoleted, is starts processing and says network timed out, without any clear reason) I can download the file separately for an older version without using iTunes fine.
I have a hunch that the multitude of emails flying in my account is causing trouble, since Mail is one of the apps closing immediately. But I cannot use settings to combat Mail problems.... Anyone any idea???
Henk

The "Network timed out " may be a firewall or antivirus on the computer.
For the apps closing, try the following:
stop all running apps:
Double-click the Home button. Hold an icon in the bottom row until the minus sign shows, then touch all minus signs to close all apps.
Then Press and Hold the Home and Power buttons until the Apple Logo appears, about 10 seconds.

Unable to get the output when i run any jsf page in adf

Hi,
I have created one jsf page to access the business components which i had created earlier after that when i drop the another panel splitter into the second facet of the initial panel splitter we created , I was unable to see in the workspace (.jpx) window.can you suggest me on this.
after done all the steps if I tried to run that page it starts the WLS servier and createda URL but the url is taking long time approx more that two hour and still not getting the required output only the loading window I can see.
Please suggest me on this.
Thanks
Chetan

Hi,
the panelSplitter should at least show in the Structure Window. So check if it is there. The runtime issue can be caused by the proxy settings. Go to Tools / Preferences --> Browser and Proxy and add localhost to the list of exclusion
If you are new to ADF I recommend running a tutorial like this: http://www.oracle.com/webfolder/technetwork/tutorials/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
Frank

Table are not prefixed with Schema in SQL request - Unable to get Data

I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
First my architecture :
Oracle 9g
+500 Reports made under CR developper 8.5 or 9.0
Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
use only CR 2008 runtime.
The problem :
Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
Example (SQL monitoring done with TOAD)
Execution of postes.rpt report directly in CR :
Timestamp: 10:30:03.881
Successful logon attempt (session tag: 0x6464CB8)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
WHERE "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
Timestamp: 10:50:29.178
Logoff (session tag: 0x6464CB8).
Same report, same authentication but throught .net program :
Timestamp: 11:01:24.569
Successful logon attempt (session tag: 0xA93FC38)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE "POSTES"."N_ETAB"=2 ORDER
BY "POSTES"."N_POSTE"
Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
The .net code :
Dim _report As New ReportDocument()
_report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
myConnectionInfo.ServerName = "DSN_file"
myConnectionInfo.UserID = p_Userid
myConnectionInfo.Password = p_Password
' to see code in this method se my original post
SetDBLogonForReport(myConnectionInfo, _report)
SetDBLogonForSubreports(myConnectionInfo, _report)
Dim frmViewer As New CrystalReportViewer
frmViewer.CrystalReportViewer1.ReportSource = _report
frmViewer.Show()
Any ideas ?

Thanks for the and sorry but I don't understand.
I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
I take a look at all code sample and I can't found anything.
You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
Another test :
I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
Then I launch it in .net with another DSN, it work also.
Why report done with Crystal 8.5 or 9.0 have this problem ?
I'me gonna be mad....
Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM

Unable to get my 1tb hd to show in windows on elitebook 8770w

Similar Messages

Maybe you are looking for