Unable to get on Internet from laptop
Hi All. I need help! I have an IBM t30 which is connected to my network via mini PCI. My NM version is 5.5.91955.0-pure().
I can see my laptop in the NM Map view, but cannot connect to the internet. All other computers on the network (Belkin router) are connecting ok.
Any suggestions????
Thanks,
mopilot
Okay…in this case connect modem >> router >> pc, you need to power cycle the n/w by unplugging power cable of modem and router, wait for a minute or so…power up the modem first once modem is rebooted power up the router, check whether it works or not, if not you may need to reset the router by pressing reset button on back panel of router, once you reset the router…power cycle the n/w again, check whether you are able to go online or not…still if it doesn’t work, logon to router’s setup page, underneath the setup page you would find subtab called MAC address clone click on it and enable it…click on clone your pc’s MAC and save the settings, power cycle the n/w again and let me know the results.
Similar Messages
-
Traded homes and iPhones in Europe now and this an old iPhone 4.2.1 unable to get my mail from mail or sign into icloud on the Internet in safari on this iPhone
You need an device (iPhone, iPad, iPod touch) with iOS 5 if you want to use iCloud. Furthermore it is also not possible to open www.icloud.com with Safari on an iOS device.
But if you want to set up Mail on your device with iOS 4 then you can do it manually. Therefor follow these instructions for devices with iOS 4: http://support.apple.com/kb/HT5330 -
Unable to get the response from dynamic partnerlink
Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
SrikanthHi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL. -
Unable to get the media from the Endeca Experience manager version 11.0.0
Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.
-
Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.
Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
KumarWilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn . -
Unable to get command line from client!
Does anyone know what this means? My G5 shuts itself down and I don't know what is causing it.
Mac OS X Version 10.4.11 (Build 8S165)
2009-02-12 11:01:19 -0800
2009-02-12 11:01:21.760 SystemUIServer[199] lang is:en
Feb 12 11:01:33 mDNSResponder: NAT Port Mapping (LLQ event port.): timeout
Feb 12 11:01:37 cups-lpd[221]: Unable to get command line from client!
Feb 12 11:10:48 Zelle-Olson cups-lpd[233]: Unable to get command line from client!
Feb 12 11:17:37 cups-lpd[235]: Unable to get command line from client!Hello golferky,
CUPS stands for Common Unix Printing System and is just one of the many background processes that is running on your system and is of no harm. What you are seeing in your message console is your Mac attempting to talk to a printer you have may have had or still have it connected to.
Here is more information if you want to look into it.
http://www.cups.org/
B-rock -
I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?
Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences -
I get my internet from wifi and since hooking up the Time Capsule I can't get in internet
We get our internet from WI FI at our housing development and since hooking up my new time capsule yesterday and started the 2 day back up, I can't get online. I am not a real techno so a simple solution would be greatly appreciated! I hate to have to turn the capsule off most of the time as I like the fact that it does an auto back up. I just got the IMac a month ago and am new to Apple.
Hi,
Thank you for posting in Windows Server Forum.
Check whether you have latest client RDP installed?
As it seems the issue happens after changing service provider. I would like you to check with internet provider whether there is restriction provided at their end or any port blocked from there end. Please recheck your firewall whether RDP port 3389 is opened.
What’s your client OS version?
Apart when you are trying to take remote desktop please try to use IP address rather than name and check the result.
More information.
Why can’t I connect using Remote Desktop Connection?
http://windows.microsoft.com/en-in/windows7/why-can-t-i-connect-using-remote-desktop-connection
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister".
If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
Best of luck. -
Unable to get IP address from DHCP since upgrading
Hi all,
I upgraded my machine to Mountain Lion last night. Ever since then I have been unable to get any IP information using DHCP. Each time I hit Renew Lease within the Network control panel I just get back a self assigned IP address. If I look in the system logs I see the following generated each time my machine tries to look for the DHCP server:
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session: bind port 68 failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 6): session socket isn't open
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session_transmit: neither bpf nor socket send available
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 0): session socket isn't open
Jul 26 01:32:28 Lightning.local configd[22]: bootp_session_delayed_close(): socket is already closed
I've tried rebooting, clearing the PRAM, deleting Prefs, etc, but nothing seems to have worked.
Anyone any ideas what is going on or what else to try? It used to work perfectly before I upgraded.
ThanksI am also having this problem since I upgraded to Mountain Lion. I did an upgrade from Lion, not a clean install. I had done a clean install of Lion though. In my case, the network connection is working most of the time, but it is droping one a day. Deactivating the Ethernet and the Wi-Fi adapters and reactivating them does not help.
Here is my what I am getting in the console when I have lost internet connection and I try to renew the DHCP lease:
2012-08-30 6:13:59.158 PM configd[17]: bootp_session: bind port 68 failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_enable_receive(en0): failed
2012-08-30 6:14:00.158 PM configd[17]: bootp_session_delayed_close(): socket is already closed
And I get a self assigned IP.
I hope Apple will have a fix for this soon!
Cheers!
JF -
Unable to get ip address from DHCP server for Aironet 1130AG Access Point
I have a network in which DHCP server is enabled. I have read the installation guide also there it is mentioned that 1130G Access point will not have any staic ip assigned to it.So it will automatically get the ip from the DHCP server from the network. I have connected that from the network but it is unable to get the ip address from the same. The same thing i have configured in the netgear it is coming fine. I have seen the sonic wall and used the IPSU tool also from checking the ip address from Mac Address but i am not able to get the same. Please provide me some tips to check where i am wrong in configuration because the first web page also not coming because of the ip address.
narendra,
I would suggest that the AP be connected to a laptop or desktop pc that would run a local dhcp server with a small scope setup...plenty of free ones on the web(this pc would obviously not be connected to your currnet network). This way you can watch the dhcp server hand the AP it's address (this can take a few minutes). Once you have the address use it to access the GUI and give the AP a static address (I find it good pratice to give all my autonomous AP's static addresses for ease of troubleshooting)...Hope that helps. -
[Solved] Share internet from (laptop) wifi to (RaspberryPi) ethernet
Hi,
I've been attempting to share the internet from my laptop wifi connection to a raspberry pi (with arch) connected via an ethernet port.
For some reason, the Rpi doesn't connect. I've closely followed the instructions at:
https://wiki.archlinux.org/index.php/Internet_sharing
Yet the following script doesn't seem to work. The Rpi recognizes the the Ethernet connection but dhcpcd isn't dishing out an IP address. When I plug the Rpi into an ethernet port on my router it connects fine so as far as i'm understanding it should 'just work'.
#!/bin/bash
DEVICE="enp0s25"
ip link set $DEVICE down
ip link set $DEVICE up
ip addr add 192.168.123.1/24 dev $DEVICE
sysctl net.ipv4.ip_forward=1
iptables -t nat -A POSTROUTING -o internet0 -j MASQUERADE
iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i $DEVICE -o internet0 -j ACCEPT
dhcpcd $DEVICE
Any tips for getting to the bottom of the issue?
Tom
Last edited by anthillsocial (2015-04-08 12:03:14)Success!! I'd mistakenly thought that dhcpcd acted as both client and server so that's where I went wrong. The following script now works using dhcpd. As a reference for others, here's my setup:
#!/bin/bash
DEVICE="enp0s25"
ROUTERIP=139.96.30.1 # 192.168.123.1
ip link set $DEVICE down
ip link set $DEVICE up
ip addr add $ROUTERIP/24 dev $DEVICE # arbitrary address
sysctl net.ipv4.ip_forward=1
iptables -t nat -A POSTROUTING -o internet0 -j MASQUERADE
iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i $DEVICE -o internet0 -j ACCEPT
#Config file: /etc/dhcpd.conf
#Database file: /var/lib/dhcp/dhcpd.leases # cat this to see if a device has been asigned a lease
#PID file: /var/run/dhcpd.pid
dhcpd $DEVICE
And /etc/dhcpd.conf contains:
option domain-name-servers 8.8.8.8, 8.8.4.4;
option subnet-mask 255.255.255.0;
option routers 139.96.30.100;
subnet 139.96.30.0 netmask 255.255.255.0 {
range 139.96.30.150 139.96.30.250;
Then to find out the IP address assigned to the Rpi, simply
cat /var/lib/dhcp/dhcpd.leases
Thanks for the help -
Unable to get the values from ISearchResultList
Hi,
I am working on KM Indexmanagemnt API for searching with TREX, to build a search similar to msn or google.
I am following the example of Thilo Brandt, and after building the query, I am unable to retrieve the result from ISearchResultList, the results size its displaying is zero. But session.getTotalNumberResultKeys() is retrieving a value 20.
Here is the code I am using, please tell me where I am doing wrong.
public class SearchComponetOne extends AbstractPortalComponent {
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response) {
com.sap.security.api.IUser nwUser =
UMFactory.getAuthenticator().getLoggedInUser();
com.sapportals.portal.security.usermanagement.IUser user = null;
try {
user = WPUMFactory.getUserFactory().getEP5User(nwUser);
} catch (UserManagementException e) {
response.write(e.getMessage());
response.write("<html><head><title>Search</title></head><body>");
ResourceContext c = new ResourceContext(user);
try {
IIndexService indexService = (IIndexService) ResourceFactory
.getInstance()
.getServiceFactory()
.getService(
IServiceTypesConst.INDEX_SERVICE);
SearchQueryListBuilder sqb = new SearchQueryListBuilder();
sqb.setSearchTerm("sap");
IQueryEntryList qel = sqb.buildSearchQueryList();
// get an instance of federated search
IFederatedSearch federatedSearch =
(IFederatedSearch) indexService.getObjectInstance(
IWcmIndexConst.FEDERATED_SEARCH_INSTANCE);
List indexList = new ArrayList();
String index = null;
if (index != null && index.length() > 0) {
// take a specified index from index= parameter
indexList.add(indexService.getIndex(index));
} else {
// take all available indexes
indexList = indexService.getActiveIndexes();
// it is recommended to use a search session object
// for searching execution
ISearchSession session = null;
if (session == null)
session = federatedSearch.searchWithSession(qel, indexList, c);
response.write("Inside doContent session.getNumberResultKeys() => " + session.getNumberResultKeys()); // output as 20
this.renderResultHeader(response, session, indexList);
// get all results from the search session
ISearchResultList results = session.getSearchResults(1, session.getTotalNumberResultKeys());
response.write(" from session => " + results.size() + " and size is : " + results.toString()); // I am getting the results.size() as zero
ThanksI think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps. -
I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access.
The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the following error upon report run:
Unable to get filter values.
An unexpected error occurred. Error 10828. Additional details have been logged for your administrator.
I have looked at the ULS logs and found the following:
An unexpected error occurred. Error 10828. Exception details: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligenceInternal(DataSource dataSource, DateTime currentTime, String formula)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligence(RepositoryLocation dataSourceLocation, DateTime currentTime, String formula)
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: Unable to get filter values. PerformancePoint Services
error code 20700.
This is odd to me, as I can trick the report to run by changing the date filters to another day, then back to the original days that error'ed out and everything is fine. Some guidance would be appreciated.Hi,
Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
check the issue.
Jaynet Zhang
TechNet Community Support
Maybe you are looking for
-
Can't see my photos on the screen of my laotop.
The Photos are in the library but they will not appear on the screen. I only get a dotted frame. If I check the info it will give me all the details about the picture.How can I get these pictures to be visible. Thanks for the help
-
Hi, I configured the RRI from one InfoCube to the transaction in ERP. During the execution the error message is displayed: No Web server maintained for the presentation of log. system abc Jump target cannot be executed I would like to run ERP
-
I bought 2 toshiba Satellite L855D-S5220 Home Premium 64 bit laptops at walmart back in july 2012,also bought extra 2 year protection from walmart. Laptops didn't come with dvd recover disc ,but did have partition recovery. We upgraded to windows 8
-
.mov from 4S is black screen when played with QT and QT 7/lion
Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro. Q2 Also I want to burn it in DVD with common video format. Any recomment free burner software? Very very very urgent!! Please help.
-
Problem restoring iTunes backup from Time Capsule
I had to reformat the hard disk on my daughters macbook and I'm having problems restoring the iTunes library. I have copied the iTunes folder onto the Macintosh Hard drive and receive this error message when I try to open iTunes saying that the .xml