Unable to get order conformations
hi
In MI2.5 SP9 client, MAM application i could get notification numbers in the device but unable to get orders to the device can any one help me out with this problem
with regards
sid
Hi,
Ordering the column first takes place from the Data Model Itself.
Please Check your column ordering in the report data model. If it is not ordered in a right way then Rearrange it.
Remove your order by in query...
If any issues... let me know
Regards,
Soofi
Similar Messages
-
I am unable to get order by column name in oracle report parameter form
i created query like following in query builder
SELECT CASE_NO, COURT_ID, CASE_TYPE,
INITCAP(PLAINTIFF) PLAINTIFF,INITCAP( DEFENDENT) DEFENDENT,
INITCAP(COUNSEL) COUNSEL, START_DATE, PREVIOUS_HEARING_DATE,
NEXT_HEARING_DATE,INITCAP( DESCRIPTION) DESCRIPTION,
INITCAP(RELIEF) RELIEF,INITCAP(EXTENT) EXTENT,
DECREE_DATE,INITCAP(STATUS) STATUS,INITCAP( LOCATION) LOCATION,
LEGAL_FILE_NO, MSNO
FROM L_CASE_MASTER_MAIN
WHERE to_char(NEXT_HEARING_DATE,'DD-MON-YYYY')=:P_NHD ORDER BY :P_COL
and i created parameter form for these two bind variables :P_NHD,:P_COL
in,:P_COL i wrote lov as Select trim(COLUMN_NAME) from user_tab_columns where table_name='L_CASE_MASTER_MAIN' to get all the columns.
in parameter form i am able to get all the columns but when i am generating report it is not giving results as per my ordered column.
kindly let me know the solution
Report Version :Oracle Reports 11g
Db Version:Oracle 11gHi,
Ordering the column first takes place from the Data Model Itself.
Please Check your column ordering in the report data model. If it is not ordered in a right way then Rearrange it.
Remove your order by in query...
If any issues... let me know
Regards,
Soofi -
My company ordered my iPhone 6 Plus 16GB on my behalf on 9/25. I am unable to get an order # from them so I can't track it. Is it possible to get an estimated shipping date? I see that today for orders being made it's 11/13, but hopefully since it was ordered last week it could come a little sooner? I know it's wishful thinking, but do business customers ever get their orders expedited?
Thanks for your responses.Thanks ChaunceyM_VZW! Unfortunately, I am not the authorized user for my company and unable to get the number. I think my only hope of getting a shipping estimate is if someone else on here who ordered on or around 9/25 posted their estimate.
-
Unable to get tha data for Residual Order Plan query-0PS_C04_Q0008
Hi Xperts,
i have activated standard query-0PS_C04_Q0008.
But when i am executing the query i am unable to get the data for "Residual order plan" in the report output..
As i checked the transformation and the queries for this, every thing seems ok.
Could please suggest me the best way to check further or How can i get the data for this field?
Regards,
SAPCheck whether you have data for "Residual order plan" in 0PS_C04.
-
Unable to get Material No and Description from VBAP
Hi Gurus
Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
regards
report ZCHGDOC_BY_SALES no standard page heading
line-size 132.
type-pools:
slis. " ALV types
Tables
tables:
cdhdr, " Change documents: Header
cdpos, " Change documents: Items
vbak, " Sales order: Header
mara, " Material No
user_addr, " User Address
vbap. " Contract order: Items
Types
types:
begin of ty_cdhdr,
objectclas like cdhdr-objectclas, " Object class
objectid like cdhdr-objectid, " Object value
changenr like cdhdr-changenr, " Document change number
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
end of ty_cdhdr,
ty_it_cdhdr type ty_cdhdr occurs 0,
begin of ty_cdpos,
objectclas like cdpos-objectclas, " Object class
objectid like cdpos-objectid, " Object value
changenr like cdpos-changenr, " Document change number
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
end of ty_cdpos,
ty_it_cdpos type ty_cdpos occurs 0,
begin of ty_dd03l,
tabname like dd03l-tabname,
fieldname like dd03l-fieldname,
as4local like dd03l-as4local,
as4vers like dd03l-as4vers,
rollname like dd03l-rollname,
end of ty_dd03l,
ty_it_dd03l type ty_dd03l occurs 0,
begin of ty_dd04t,
rollname like dd04t-rollname,
ddlanguage like dd04t-ddlanguage,
as4local like dd04t-as4local,
as4vers like dd04t-as4vers,
scrtext_l like dd04t-scrtext_l,
end of ty_dd04t,
ty_it_dd04t type ty_dd04t occurs 0,
begin of ty_kna1,
kunnr like kna1-kunnr, " Customer number
name1 like kna1-name1, " Customer name
end of ty_kna1,
ty_it_kna1 type ty_kna1 occurs 0,
begin of ty_user_addr,
bname like user_addr-bname, " user no
name_textc like user_addr-name_textc , " Username
end of ty_user_addr,
ty_it_user_addr type ty_user_addr occurs 0,
begin of ty_vbap,
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Production Description
end of ty_vbap,
ty_it_vbap type ty_vbap occurs 0,
ty_text(500) type c,
ty_lines type tline,
ty_it_lines type ty_lines occurs 0,
begin of ty_merged,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
bname like vbak-bname , " User No
xblnr like vbak-xblnr, " Reference
fbuda like vbkd-fbuda, " Date services rendered
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
scrtext_l like dd04t-scrtext_l, " Description of field
intnote type ty_text, " Internal note
hdrnote type ty_text, " Header note
name1 like adrc-name1, " Sold-to party name
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Product Description
end of ty_merged,
ty_it_merged type ty_merged occurs 0,
begin of ty_vbak,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
xblnr like vbak-xblnr, " Reference
objectid like cdhdr-objectid, " Change document object
end of ty_vbak,
ty_it_vbak type ty_vbak occurs 0,
begin of ty_vbkd,
vbeln like vbkd-vbeln, " Sales order number
posnr like vbkd-posnr, " Sales order item
fbuda like vbkd-fbuda, " Date services rendered
end of ty_vbkd,
ty_it_vbkd type ty_vbkd occurs 0.
Internal tables
data:
it_cdhdr type ty_it_cdhdr,
it_cdpos type ty_it_cdpos,
it_fieldcat type slis_t_fieldcat_alv,
it_kna1 type ty_it_kna1,
it_user_addr type ty_it_user_addr,
it_merged type ty_it_merged,
it_vbak type ty_it_vbak,
Material No
it_vbap type ty_it_vbap,
it_vbkd type ty_it_vbkd.
data:
wa_vbak type ty_vbak.
data:
st_tvariant like disvariant,
st_variant like disvariant.
constants:
co_as4local_a like dd03l-as4local " Active version
value 'A',
co_objectclas_verkbeleg like cdhdr-objectclas
value 'VERKBELEG',
co_posnr_initial like vbkd-posnr " Initial item number
value is initial,
co_posnr_initial_2 like vbap-posnr " Initial item number
value is initial,
co_save_u type c " User display variant
value 'U', " saving allowed.
co_trvog_0 like vbak-trvog " Sales order
value '0'.
data:
va_exit type c, " ALV display
va_tabix like sy-tabix.
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_vkorg for vbak-vkorg OBLIGATORY, " Sales organisation
s_vkbur for vbak-vkbur, " Sales office
s_vtweg for vbak-vtweg, " Distribution channel
s_vbeln for vbak-vbeln, " Sales order number
s_usrnme for cdhdr-username, " Changed by
s_udate for cdhdr-udate. " Changed on
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialization
initialization.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
Start of selection
Extract order details from VBAK
select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
kunnr xblnr
from vbak
into table it_vbak
where vkorg in s_vkorg
and vkbur in s_vkbur
and vbeln in s_vbeln.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
Extract Change data
select objectclas objectid changenr username udate utime tcode
from cdhdr
into table it_cdhdr
for all entries in it_vbak
where objectclas eq co_objectclas_verkbeleg
and objectid eq it_vbak-objectid
and username in s_usrnme
and udate in s_udate.
if sy-subrc eq 0.
select objectclas objectid changenr tabname tabkey fname chngind
value_new value_old
from cdpos
into table it_cdpos
for all entries in it_cdhdr
where fname NE 'CMPRE_FLT'
and objectclas eq it_cdhdr-objectclas
and objectid eq it_cdhdr-objectid
and changenr eq it_cdhdr-changenr.
endif.
Extract customer details from KNA1
select kunnr name1
from kna1
into table it_kna1
for all entries in it_vbak
where kunnr eq it_vbak-kunnr.
---- Changes are made here -
Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
-----------------End of Change ----------------------*
Extract Contract No from vbkd.
select vbeln posnr fbuda
from vbkd
into table it_vbkd
for all entries in it_vbak
where vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
perform merge_data tables it_cdhdr
it_cdpos
it_kna1
it_user_addr
it_merged
it_vbak
it_vbap
it_vbkd.
if it_merged[] is initial.
message s001(zgen).
exit.
endif.
Release memory no longer required.
free: it_cdhdr,
it_cdpos,
it_kna1,
it_user_addr,
it_vbak,
it_vbap,
it_vbkd.
Build field catalog for call to report function
perform build_field_catalog tables it_fieldcat.
Output report.
perform output_report tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_cdhdr type ty_it_cdhdr
pa_it_cdpos type ty_it_cdpos
pa_it_kna1 type ty_it_kna1
pa_it_user_addr type ty_it_user_addr
pa_it_merged type ty_it_merged
pa_it_vbak type ty_it_vbak
pa_it_vbap type ty_it_vbap
pa_it_vbkd type ty_it_vbkd.
Local internal tables
data:
lit_dd03l type ty_it_dd03l,
lit_dd04t type ty_it_dd04t.
Local work areas
data:
lwa_cdhdr type ty_cdhdr,
lwa_cdpos type ty_cdpos,
lwa_dd03l type ty_dd03l,
lwa_dd04t type ty_dd04t,
lwa_kna1 type ty_kna1,
lwa_user_addr type ty_user_addr,
lwa_merged type ty_merged,
lwa_vbak type ty_vbak,
lwa_vbap type ty_vbap,
lwa_vbkd type ty_vbkd.
Local variables
data:
lva_dd03l_tabix like sy-tabix,
lva_dd04t_tabix like sy-tabix.
Sort Data
sort pa_it_cdhdr by objectid changenr.
sort pa_it_cdpos by objectid changenr tabname tabkey fname.
sort pa_it_kna1 by kunnr.
sort pa_it_user_addr by bname.
sort pa_it_vbak by vbeln.
sort pa_it_vbkd by vbeln.
loop at pa_it_vbak into lwa_vbak.
clear lwa_merged.
Assign sales order fields to reporting work area
lwa_merged-vbeln = lwa_vbak-vbeln.
lwa_merged-erdat = lwa_vbak-erdat.
lwa_merged-auart = lwa_vbak-auart.
lwa_merged-faksk = lwa_vbak-faksk.
lwa_merged-netwr = lwa_vbak-netwr.
lwa_merged-waerk = lwa_vbak-waerk.
lwa_merged-vkorg = lwa_vbak-vkorg.
lwa_merged-vtweg = lwa_vbak-vtweg.
lwa_merged-vkbur = lwa_vbak-vkbur.
lwa_merged-fkara = lwa_vbak-fkara.
lwa_merged-kunnr = lwa_vbak-kunnr.
lwa_merged-bname = 1wa_user_addr-bname.
lwa_merged-xblnr = lwa_vbak-xblnr.
Assgin Material to reporting work area
lwa_merged-matnr = lwa_vbap-vbeln.
Get name of sold-to party from PA_IT_KNA1
clear lwa_kna1.
read table pa_it_kna1 into lwa_kna1
with key kunnr = lwa_vbak-kunnr
binary search.
lwa_merged-name1 = lwa_kna1-name1.
Get name from PA_it_user_addr
clear lwa_user_addr.
read table pa_it_user_addr into lwa_user_addr
with key = lwa_user_addr-bname
binary search.
lwa_merged-username = lwa_user_addr-name_textc.
Get business data from PA_IT_VBKD.
clear lwa_vbkd.
read table pa_it_vbkd into lwa_vbkd
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-fbuda = lwa_vbkd-fbuda.
Get Material Data
clear lwa_vbap.
read table pa_it_vbap into lwa_vbap
with key matnr = lwa_vbap-matnr
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-arktx = lwa_vbap-arktx.
Get internal note text for sales order
perform read_text using '0002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-intnote.
Get header note 1 text for sales order
perform read_text using 'Z002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-hdrnote.
Determine if change documents exist for sales order.
clear lwa_cdhdr.
read table pa_it_cdhdr into lwa_cdhdr
with key objectid = lwa_vbak-objectid.
if sy-subrc ne 0.
continue.
endif.
loop at pa_it_cdhdr into lwa_cdhdr
from sy-tabix.
lwa_merged-username = lwa_cdhdr-username.
lwa_merged-udate = lwa_cdhdr-udate.
lwa_merged-utime = lwa_cdhdr-utime.
lwa_merged-tcode = lwa_cdhdr-tcode.
clear lwa_cdpos.
read table pa_it_cdpos into lwa_cdpos
with key objectid = lwa_cdhdr-objectid
changenr = lwa_cdhdr-changenr
binary search.
loop at pa_it_cdpos into lwa_cdpos
from sy-tabix.
lwa_merged-tabname = lwa_cdpos-tabname.
lwa_merged-tabkey = lwa_cdpos-tabkey.
lwa_merged-fname = lwa_cdpos-fname.
lwa_merged-chngind = lwa_cdpos-chngind.
lwa_merged-value_new = lwa_cdpos-value_new.
lwa_merged-value_old = lwa_cdpos-value_old.
Get description for field - determine date element
clear lwa_dd03l.
read table lit_dd03l into lwa_dd03l
with key tabname = lwa_cdpos-tabname
fieldname = lwa_cdpos-fname
binary search.
lva_dd03l_tabix = sy-tabix.
if sy-subrc ne 0.
select single tabname fieldname as4local as4vers rollname
from dd03l
into lwa_dd03l
where tabname eq lwa_cdpos-tabname
and fieldname eq lwa_cdpos-fname
and as4local eq co_as4local_a.
if sy-subrc eq 0.
insert lwa_dd03l into lit_dd03l
index lva_dd03l_tabix.
endif.
endif.
If data element was found, get description
if not lwa_dd03l is initial.
clear lwa_dd04t.
read table lit_dd04t into lwa_dd04t
with key rollname = lwa_dd03l-rollname
ddlanguage = sy-langu
binary search.
lva_dd04t_tabix = sy-tabix.
if sy-subrc ne 0.
select single rollname ddlanguage as4local as4vers scrtext_l
from dd04t
into lwa_dd04t
where rollname eq lwa_dd03l-rollname
and ddlanguage eq sy-langu.
if sy-subrc eq 0.
insert lwa_dd04t into lit_dd04t
index lva_dd04t_tabix.
else.
lwa_dd04t-scrtext_l = 'Description for field not found'.
endif.
endif.
endif.
lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
append lwa_merged to pa_it_merged.
at end of changenr.
Only process field changes for this change document.
exit.
endat.
endloop.
at end of objectid.
Initialise work area so we know change document for order has
been processed.
clear lwa_merged.
Only process change documents for this sales order.
exit.
endat.
endloop.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
data:
Local variable
lva_col_pos type slis_fieldcat_alv-col_pos,
Local structure
st_fieldcat type slis_fieldcat_alv.
lva_col_pos = 0.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VBELN'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKBUR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKBUR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKORG'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKORG'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'KUNNR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'KUNNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'NAME1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-ref_fieldname = 'NAME1'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '15'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'MATNR'.
st_fieldcat-ref_tabname = 'VBAP'.
st_fieldcat-ref_fieldname = 'MATNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'SCRTEXT_L'.
st_fieldcat-ref_tabname = 'DD04T'.
st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'UDATE'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'UDATE'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '10'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'USERNAME'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'USERNAME'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'FNAME'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'FNAME'.
st_fieldcat-row_pos = '4'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'CHNGIND'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'CHNGIND'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'WAERK'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '5'.
st_fieldcat-col_pos = lva_col_pos..
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_NEW'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_NEW'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_OLD'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_OLD'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report
text
form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_formname type slis_formname,
lva_repid like sy-repid.
lva_repid = sy-repid.
lva_formname = 'ALV_USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report
*& Form alv_user_command
text
form alv_user_command using pa_ucomm like sy-ucomm
pa_selfield type slis_selfield.
Local work areas
data:
lwa_merged type ty_merged.
clear lwa_merged.
read table it_merged into lwa_merged
index pa_selfield-tabindex.
case pa_selfield-fieldname.
when 'VBELN'.
Contract Number
set parameter id 'AUN' field lwa_merged-vbeln.
call transaction 'VA03' and skip first screen.
S_BCE_68001393
when 'USERNAME'.
Username
set parameter id 'username' field lwa_merged-username.
call transaction 'S_BCE_68001393' and skip first screen.
when 'KUNNR'.
Customer number
set parameter id 'KUN' field lwa_merged-kunnr.
set parameter id 'VKO' field space.
set parameter id 'VTW' field space.
set parameter id 'SPA' field space.
call transaction 'XD03' and skip first screen.
endcase.
endform. " alv_user_command
*& Form read_text
text
form read_text using pa_id
pa_inline_count
pa_name
pa_object
pa_text.
Local internal tables
data:
lit_inlines type ty_it_lines,
lit_lines type ty_it_lines.
Local work areas
data:
lwa_lines type ty_lines.
Local variables
data:
lva_tdname like thead-tdname.
refresh: lit_inlines,
lit_lines.
lva_tdname = pa_name.
call function 'READ_TEXT_INLINE'
exporting
id = pa_id
inline_count = pa_inline_count
language = sy-langu
name = lva_tdname
object = pa_object
tables
inlines = lit_inlines
lines = lit_lines
exceptions
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
others = 7.
loop at lit_lines into lwa_lines.
concatenate pa_text
lwa_lines-tdline
into pa_text separated by space.
endloop.
endform. " read_text ENDLOOP.Hi
As per your code here:
"-------------- Changes are made here ----------------
*Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial. " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
" -----------------End of Change ----------------------
Try as below by commenting the Item Number is INITIAL condition:
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln.
"and posnr eq co_posnr_initial.
Regards
Eswar -
Table are not prefixed with Schema in SQL request - Unable to get Data
I began this new thread because I closed the [previous one|Unable to get data (DSN connection); a little bit early, I believed it was OK but no the problem still here.
First my architecture :
Oracle 9g
+500 Reports made under CR developper 8.5 or 9.0
Report opened in VB .net application, framework 2.0 using CR runtime 8.5 and 9.0
We want to upgrade CR version to 2008, so modification of reports will be done with CR 2008 Developper, and we want to
use only CR 2008 runtime.
The problem :
Everything works fine in CR Developer, but the same report with the same parameters failed when called inside .net.
The error is "Unable to get data", the database connection is OK but the queries mades from inside the report are wrong :
The tables/views in the from statement are not prefixed with the Schema, so Oracle don't find them.
Example (SQL monitoring done with TOAD)
Execution of postes.rpt report directly in CR :
Timestamp: 10:30:03.881
Successful logon attempt (session tag: 0x6464CB8)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "COMMUN"."ETAB" "ETAB" INNER JOIN "GESTION_DES_TEMPS"."POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB"
WHERE "POSTES"."N_ETAB"=2 ORDER BY "POSTES"."N_POSTE"
Timestamp: 10:50:29.178
Logoff (session tag: 0x6464CB8).
Same report, same authentication but throught .net program :
Timestamp: 11:01:24.569
Successful logon attempt (session tag: 0xA93FC38)
username: 'APPLI_HUET'; database: 'DEV'
SELECT ...
FROM "ETAB" "ETAB" INNER JOIN "POSTES" "POSTES"
ON "ETAB"."N_ETAB"="POSTES"."N_ETAB" WHERE "POSTES"."N_ETAB"=2 ORDER
BY "POSTES"."N_POSTE"
Runtime error occurred: 942 (ORA-00942: Table ou vue inexistante)
The .net code :
Dim _report As New ReportDocument()
_report.Load("report.rpt", OpenReportMethod.OpenReportByDefault)
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
myConnectionInfo.ServerName = "DSN_file"
myConnectionInfo.UserID = p_Userid
myConnectionInfo.Password = p_Password
' to see code in this method se my original post
SetDBLogonForReport(myConnectionInfo, _report)
SetDBLogonForSubreports(myConnectionInfo, _report)
Dim frmViewer As New CrystalReportViewer
frmViewer.CrystalReportViewer1.ReportSource = _report
frmViewer.Show()
Any ideas ?Thanks for the and sorry but I don't understand.
I've made a research of Location on this forum the more intersting thread I've found is rpt-files do not function anymore after deploying to a different database, but I still don't understand.
I take a look at all code sample and I can't found anything.
You say that .Location need to be set, indeed Location property of CrystalDecisions.CrystalReports.Engine.Table object only contains table name.
I tried to overrides this value by the fully qualified table name (ie Schema.Table, for example GESTION_DES_TEMPS.POSTES), and it work BUT it wouldn't be the solution, my code is designed to be generic, I can't have a database to know wich schema add before differents table name.
Why when we execute the report directly in CR 2008 developper we don't have to redefine the table location ?
Another test :
I've made a new report directly in CR 2008 with a DSN, launch it in .net with the same DSN (server) : OK
Then I launch it in .net with another DSN, it work also.
Why report done with Crystal 8.5 or 9.0 have this problem ?
I'me gonna be mad....
Edited by: Yoann DAVID on Jan 8, 2010 3:32 PM -
Unable to get the item value in cursor
I have function which returns organization_id for each item selected in Sales Order window.
From this function I will populate warehouse value in shipping tab whenever i am tabbing out from ordered item in Sales Order Form.
But my cursor is unable to get the item id value (Ex: FOR cur_rec IN cus_l (l_item_id)). It is directly going to last return statement and displaying default value.
Please help me out.
FUNCTION custom_default_rule (
p_database_object_name IN VARCHAR2,
p_attribute_code IN VARCHAR2
RETURN NUMBER
AS
l_line_type_rec oe_order_cache.line_type_rec_type;
l_item_id NUMBER;
p_org_id NUMBER;
CURSOR cus_l (p_item_id IN NUMBER)
IS
SELECT a.organization_id, b.element_name, b.element_value
FROM mtl_parameters a,
mtl_descr_element_values b,
mtl_system_items_b c
WHERE b.inventory_item_id = c.inventory_item_id
AND a.organization_id = c.organization_id
AND a.organization_id = c.organization_id
AND c.inventory_item_id = p_item_id
AND a.organization_id <> a.master_organization_id
ORDER BY a.organization_id;
CURSOR cur_org (p_org_id IN NUMBER)
IS
SELECT organization_code
FROM mtl_parameters
WHERE organization_id = p_org_id;
BEGIN
l_line_type_rec :=
oe_order_cache.load_line_type
(ont_line_def_hdlr.g_record.line_type_id);
l_item_id := ont_line_def_hdlr.g_record.inventory_item_id;
FOR cur_rec IN cus_l (l_item_id)
LOOP
IF cur_rec.element_name IN
('Frequency',
'Emission Norms',
'Voltage',
'Duty Rating',
'Phase',
'Product Family'
AND cur_rec.element_value IN
('50',
'Dual',
'Euro',
'210',
'230',
'440',
'Low',
'Medium',
'Heavy',
'Three',
'QSK60',
'QSK15',
'QSK10',
'DQK50'
THEN
RETURN cur_rec.organization_id;
If u want more info. abt function refer: Refer "PL/SQL API + Defaulting Rules in OM" in Forums.oracle.com
(OR)
PL/SQL API + Defaulting Rules in OM
Please help me out. This is very urgent.
Thanks & Regards,
Sateesh KumarHi Suresh,
I tried like below:
create or replace FUNCTION custom_default_rule (
p_database_object_name IN VARCHAR2,
p_attribute_code IN VARCHAR2
RETURN NUMBER
AS
l_line_type_rec oe_order_cache.line_type_rec_type;
l_line_rec OE_AK_ORDER_LINES_V%ROWTYPE;
l_item_id NUMBER;
p_org_id NUMBER;
CURSOR cus_l (p_item_id IN NUMBER)
IS
SELECT a.organization_id, b.element_name, b.element_value
FROM mtl_parameters a,
mtl_descr_element_values b,
mtl_system_items_b c
WHERE b.inventory_item_id = c.inventory_item_id
AND a.organization_id = c.organization_id
AND a.organization_id = c.organization_id
AND c.inventory_item_id = p_item_id
AND a.organization_id <> a.master_organization_id
ORDER BY a.organization_id;
CURSOR cur_org (p_org_id IN NUMBER)
IS
SELECT organization_code
FROM mtl_parameters
WHERE organization_id = p_org_id;
BEGIN
l_line_type_rec :=
oe_order_cache.load_line_type(ont_line_def_hdlr.g_record.line_type_id);
l_line_rec := ONT_line_Def_Hdlr.g_record;
-- l_item_id := l_line_rec.inventory_item_id;
-- FOR cur_rec IN cus_l (l_item_id)
FOR cur_rec IN cus_l(l_line_rec.inventory_item_id)
LOOP
IF cur_rec.element_name IN
('Frequency',
'Emission Norms',
'Voltage',
'Duty Rating',
'Phase',
'Product Family'
AND cur_rec.element_value IN
('50',
'Dual',
'Euro',
'210',
'230',
'440',
'Low',
'Medium',
'Heavy',
'Three',
'QSK60',
'QSK15',
'QSK10',
'DQK50'
THEN
RETURN cur_rec.organization_id;
FOR cur_rec_org IN cur_org (p_org_id)
LOOP
RETURN cur_rec_org.organization_code;
END LOOP;
END IF;
END LOOP;
RETURN '204';
EXCEPTION
WHEN OTHERS
THEN
IF oe_msg_pub.check_msg_level (oe_msg_pub.g_msg_lvl_unexp_error)
THEN
oe_msg_pub.add_exc_msg ('OE_Default_PVT', 'CUSTOM_DEFAULT_RULE');
END IF;
RAISE fnd_api.g_exc_unexpected_error;
END custom_default_rule;
This function executed without errors. But it is displaying final return statement value (i.e., 204).
I am not getting inventory_item_id value to my cursor.
Please help me out...It is very urgent.
Thanks & Regards,
Sateesh Kumar S
Message was edited by:
user610830 -
I'm locked out of my iPhone. My 4 digit security code is not working. I've tried to connect to iTunes to do a recovery however I. Order to do this it asks me for the 4 digit code. I need to reset it but unable to get into reset as well. Help!!t can I reset it using my iPad which is registered to the same account
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps.. -
MERGE error : unable to get a stable set of rows in the source tables
Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
AnnieAnnie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
select columns_you_need
from (
select ftp.columns -- whatever they are
, int2.columns
, row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
from ftp
left join int int2
on (the condition you used in your query)
where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel -
ORA-30926: unable to get a stable set of rows in the source table
When user are trying to open a form getting below error.
com.retek.platform.exception.RetekUnknownSystemException:ORA-30926: unable to get a stable set of rows in the source tables
Please advice
Edited by: user13382934 on Jul 9, 2011 1:32 PMPlease try this
create table UPDTE_DEFERRED_MAILING_RECORDS nologging as
SELECT distinct a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
a.drank,
c.CONTACT_CD,
c.NEW_CUST_CD,
a.DM_ROW_ID
FROM (SELECT a.ROWID AS DM_ROW_ID,
a.CUST_ID,
a.EMP_ID,
a.PURCHASE_DATE,
dense_rank() over(PARTITION BY a.CUST_ID, a.EMP_ID ORDER
BY a.PURCHASE_DATE DESC, a.ROWID) DRANK
FROM deferred_mailing a) a,
customer c
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
and a.drank=1;
The query you've posted is behaving according to the expectations. The inner select is returning one row and the outer is returning two as the
WHERE a.CUST_ID = c.CUST_ID
AND a.EMP_ID = c.EMP_ID
AND (a.PURCHASE_DATE <= c.PURCHASE_DATE OR
c.PURCHASE_DATE IS NULL)
conditions are seeing two rows in the table customer.
I've added the a.drank=1 clause to skip the duplicates from the inner table and distinct in the final result to remove duplicates from the overall query result.
For eg, if you have one more row in the deferred_mailing like this
SQL> select * from DEFERRED_MAILING;
CUST_ID EMP_ID PURCHASE_
444 10 11-JAN-11
444 10 11-JAN-11
then the query without "a.drank=1" will return 4 rows like this by the outer query.
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
It'll return the below even if we use distinct on the same query(i.e. without a.drank=1)
CUST_ID EMP_ID PURCHASE_ DM_ROW_ID DRANK C N
444 10 11-JAN-11 AAATi2AAGAAAACcAAB 2 Y Y
444 10 11-JAN-11 AAATi2AAGAAAACcAAA 1 Y Y
which contains duplicates again.
So, we need a combination of distinct and dense here.
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM -
Unable to get the "Alerts" in the bi dashboard
Hi experts,
I am using Oracle business intelligence standard edition one version, I am using Delivers to send Email. I did all the configuration successfully and I am able send the email. But unable to get the "Alerts" anywhere in the dashboard after clicking save in Delivers.
Please help me to how to bring the "Alerts" highlighted in the BI Dashboard.
Regards,
RajHow about permission on Admin> Previlages > Manage Previlages > delivers make sure it for everyone
Also make sure you have _Delivers folder.
In order to get a list of all the ibots that are sent to you(Interactive Dashboard should be part of your Active Delivery Profile) create a section in your Dashboard and rename that section as _Delivers. That will show all the list of ibots. -
Unable to get in to blackberry app world! Please help?
I have a blackberry curve 8520, and every time I go into app world it asks me to log in, I cannot remember my username, and im unable to get into my email account as it was hacked. As a result I was going to delete my app world I have at the moment, re-download it and make a new id, but it will not let me? what can I do in order to download apps?
Have you deleted AppWorld at this point, and what is it exactly that you cannot do at this point?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Javax.servlet.ServletException: Unable to get connection,DataSource invalid
Can somebody explain this error to me please
javax.servlet.ServletException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException:
Cannot create PoolableConnectionFactory (Server connection failure during transaction. Due to underlying exception:
'java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)'.
** BEGIN NESTED EXCEPTION **
java.security.AccessControlException
MESSAGE: access denied (java.net.SocketPermission localhost resolve)
STACKTRACE:
java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
at java.security.AccessController.checkPermission(AccessController.java:427)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
at java.lang.SecurityManager.checkConnect(SecurityManager.java:1031)
at java.net.InetAddress.getAllByName0(InetAddress.java:1117)
at java.net.InetAddress.getAllByName0(InetAddress.java:1098)
at java.net.InetAddress.getAllByName(InetAddress.java:1061)
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:138)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:277)
at com.mysql.jdbc.Connection.createNewIO(Connection.java:2817)
at com.mysql.jdbc.Connection.<init>(Connection.java:1531)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:37)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:877)
at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:851)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:274)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:159)
at org.apache.jsp.index_jsp._jspx_meth_sql_query_0(index_jsp.java:100)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:58)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
at org.apache.catalina.core.ApplicationFilterChain.access$0(ApplicationFilterChain.java:177)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
** END NESTED EXCEPTION **
Attempted reconnect 3 times. Giving up.)"
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:843)
org.apache.jasper.runtime.PageContextImpl.access$11(PageContextImpl.java:781)
org.apache.jasper.runtime.PageContextImpl$12.run(PageContextImpl.java:763)
java.security.AccessController.doPrivileged(Native Method)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:761)
org.apache.jsp.index_jsp._jspService(index_jsp.java:81)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The URL url="jdbc:mysql://localhost:3306/wroxcatalog" looks right to me...wroxcatalog is the MySQL database.
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ include file="include.jsp"%>
<sql:setDataSource
var="datasource"
driver="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/wroxcatalog"
user="wroxuser"
password="wrox" />
<sql:query var="books" dataSource="${datasource}">
select id, name, description, price from products order by id
</sql:query>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>TryDB</title>
</head>
<body>
<table border="1">
<tr>
<td>ID</td><td>Name</td><td>Description</td><td>Price</td>
</tr>
<c:forEach items="${books.rows}" var="row">
<tr>
<td><c:out value="${row.id}"/></td>
<td><c:out value="${row.name}"/></td>
<td><c:out value="${row.description}"/></td>
<td><c:out value="${row.price}"/></td>
</tr>
</c:forEach>
</table>
</body>
</html> -
I am a residential appraiser and recently purchased an ipad 4 to use for my home inspections. Some homes are foreclosed poperties without power and I am unable to get a good interior picture without a flash. Does anyone know of a flash attachment for the ipad 4? I found a flash attachment for the ipad 2, but it does not work with the ipad 4.
I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do. -
Unable to get area list, access projects
I'm running RoboHelp Server 9 and I have two issues that could be related.
First, when I attempt to publish WebHelp Pro from RoboHelp, I am unable to select a Help Area in the SSL dialog. I receive a message stating, "Unable to get area list from server." I opened the RoboHelp Server Web Administrator and verified that the areas are listed.
Second, when I go into the server and open the RoboHelp Server Web Administrator and select Projects, I receive a message stating, "Communication error. Server is refreshing project data. Try reloading projects pane in a little while."
I am at a complete loss. Here are things that I or my IT department have tried to do to fix this issue. None of these have worked:
Change the "reindex" property in the robohelp_server.properties file
Increase the PermSpace available to Tomcat:
Run the tomcat-install-dir>/bin/tomcat6w.exe file to open the Apache Tomcat Properties dialog box.
Verify that the Maximum Memory Pool setting is not blank. If it is blank, then specify a value, such as 512 MB. Make sure that the Maximum Memory Pool and XX:MaxPermSize values don't add up to more than the actual memory you can make available to Tomcat.
Restart Tomcat.
Wait 5 – 10 minutes after you publish your project to make sure that the data structure is loaded.
Rebooted the server
Removed recent updates from Adobe and Windows.
Tried using Firefox browser
I appreciate any help that can be offered.
Also note that this was not a problem before. I was able to successfully publish to the server, then suddenly I could not.Hi Shannon.
The step that puzzles me is "Removed recent updates from Adobe and Windows". Could you expan on what the Adobe updates were? The reason I ask is that in my experience the application set-up (e.g. Tomcat + RHS) does not react well to removing things. You may have been OK just removing updates but as you have to install the applications in a precise order, removing updates could have messed with the communication between them.
You certainly seem to have gone through the steps we normally advise in this situation. You could try connecting to the database you are using. If you respond it would be useful to have further information about the physical server and database configuration you are using.
Maybe you are looking for
-
8 devices, one account, iTunes being difficult - help?
OK, here goes: We have two MacBook Pros, two iPhone3G, one iPhone 3GS, one iPhone 4S, an iPod Nano (1st gen) and an AppleTV (1st Gen). Home network is on a Time Capsule (3rd Gen), which has USB connections for drives/printers/etc. I have two USB driv
-
Hi, I have understood that it is possible to down convert HDV, HD and other non SD formats for preview on a CRT monitor. I have a sony hdv/dvcam deck connected via firewire to my mac, and via s-video to my CRT. I have tried to preview to CRT as descr
-
I have just tried to create a list on my oracle workspace and there is no way to specify the type of list, ie, vertical, horizontal etc. I have various choices in Aex 3.2 Gus
-
Hi every one I have some problem in basic understanding of the wireless speed. can any one help me with this please? When we are considering for example AC connection with 2x2 antenna (provided no noise and close to the AP) we expect around 20MBps
-
Hi, I have gone through some articles regarding SOAP but not able to find any use of it..I surfed through web but not able to trace the actual point....my confusion is "we can work with XML messages directly over HTTP , then why we need SOAP then ?"