Unable to get past disc 1 of when installing PSE10 on windows 7

This is a fist install of a recently purchased set of discs.  when the first disc is complete I install the 2nd disc as instructed click ok and the installer then says that the installation is finished .  Anyone any suggestions?

You did install the organizer--can't install without it--this would be a very popular feature if available, but it's not.
Splash, you're done. Disc 2 is the Premiere Elements trial and Disc 3 is the mac version.

Similar Messages

  • How do we get past the error message when installing PSE10 on a Winndows 7 machine?

    My friend and I downloaded a copy of PSE10 and attempted to install it on a Windows 7 machine.  After completing about 98% of the installation, we encountered an error -- either #1935 or #1395.  We could not get past that point.  The software, then, backed out of the process. 
    We downloaded another copy of PSE 10 from another source and tried to install it.  Same result. 
    We called Adobe and the person responding told us that it was a compatibility problem between PSE 10 and Windows 7.  He suggested a work-around that may or may not work, but for technical reasons, we were unable even to try it.  (Create a new operator identity in Windows and use that to install the software.)  Adding insult to injury, he indicated that we would have to pay for his advice on how to resolve Adobe's problem
    Since it is hard to invent a new problem, there must be hundreds, if not thousands, of people who have experienced this problem and found a simple way to solve it.  Please, tell us how!

    Perhaps the steps you saw to fix this issue were here:
    http://kb2.adobe.com/cps/403/kb403969...
    Regarding modifying the registry as suggested in solution 2 (you shouldn't be concerned with installing updates though) we would always recommend backing up the registry before making any changes. That way you can always restore to what you had before troubleshooting.

  • HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

    I keep getting an windows installation error when installing icloud for windows 7.  I have tried installing manually without success.

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • Unable to get past message about "Find my IPOD Touch" when ITUNES starts

    When I connect my IPOD Touch to computer and Itunes opens, I get the screen shown below and unable to get past it. I can access all other stuff in Itunes. I am unable to sync by IPOD. Clickin on the supposed links in the message does nothing.
    This is the screen I get:
    Free Find My iPhone
    Free Find My iPad
    Free Find My iPod touch
    Set up Find My iPhone for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPad or iPod touch.Set up Find My iPad for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPod touch.Set up Find My iPod touch for free so you can locate your device if you lose it, remotely lock the screen, or wipe its data. You can also find your iPhone or iPad. Learn More
    Not Now
    Set up Find My iPhone
    Set up Find My iPad
    Set up Find My iPod touch
    Find My iPhone (or iPad or iPod touch) enables you to locate your iPad with Wi-Fi or iPod touch only when it is on and connected to a registered Wi-Fi network. Find My iPhone is not available in all countries.

    As I said on my first post, changing the iTunes Library name did not work. Restarted my PC, iTunes, my iPhone. Nothing worked.
    Before going on, I put every thing back the way it was, and exported my library, just to be sure.
    Then I tried and removed every iTunes Library file (iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb and iTunes Library.xml). Restarted and it worked. Then I imported my library, and went to my Mobile applications folder and re-added all apps to iTunes.
    BUT the apps in my iPhone in iTunes apps window were greyed out. So I synced my apps. It said it would remove everything from the phone and replace it with the new apps, I confirmed, and it synced just fine. I lost no data, no saved games, no apps, no music, everything was just fine.
    Hope it helps.
    Cheers.

  • I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

    I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet."  Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages?  When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

    You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

  • New MacBook Pro, unable to get past the select your country screen during initial setup.

    I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country.  The mouse will move around, but won't actually allow me to click on 'continue'.  I've also tried the keyboard commands to move to the next screen.  Nothing...

    I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
    ... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I am unable to get past the Terms and Conditions in the new update. I have hit agree several times but can not get past that part. What do I do next?

    I am unable to get past the terms and conditions part of the upgrade. I have hit agree several times. What do I do?

    Scroll down to the bottom of the terms and conditions, then the Agree button will light up and you can proceed.

  • How do I get recover disc for vista when system will not boot???? For Pavilion pc a6157c

    Pavilion pc a6157c   How do I get recover disc for vista when system will not boot????

    Read THIS HP Support Document concerning ordering recovery discs for your HP a6157c. Go to THIS HP webpage to order the "Vista Home Premium 32bit 73NAv3PrA1 + Supp 4 Recovery Kit" for your computer. If you are not looking to order the recovery discs or have some other issue with your computer, please provide detailed information concerning the problem.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

    During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

    I am having the same problem.  I think I saw something about VPN and not being able to communicate with Apple web site.  Do you have your protected company email on your phone?

  • I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

    Hey Dpcupcake,
    If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

    I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • HT201210 please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

    please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

    Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.

  • HT4623 how do i get past error code 4005 when updating to iphone 6 on itunes

    how do i get past error code 4005 when updating to iphone 6 on itunes

    Try the troubleshooting for that error code on this page : iOS: Restore errors 4005, 4013, and 4014.

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • Restarting A Flex Application Programmatically

    Howdy folks, I have just created a database driven user management system which works wonders, but I'm having a problem with logging out a user. By far the easiest, sure fire way of doing this would be to clear the users login in the database (not re

  • Summation query

    Hello, I have a report which shows the spend amount for the vendors for the last 12 months. I am trying to add a column which shows summation of the amounts by vendor. Now it shows only the total for each month. How can I also show the totals for the

  • Table for the program code

    Hi Freinds, is there any table to store the  program code , i mean whatever we write in  SE 38 will it be stores any data base tables? we have one option to get the code that is READ REPORT INTO ITAB. other than this is there any database tables for

  • Writing sql in adf bc

    hi, Now i'm doing my final year project(6 months) and currntly i'm doing project in adf faces business components with jsf . here i want full demo to create jsf page using adf faces upto database linking includes dml options behind the adf button(any

  • Error in drawmgr.cpp when running VI

    I have a VI which is trying to draw the following items on the screen - 6 graphs 2 x realtime plots from DAQ 2 x Outputs from limit testing VI (= 4 waveforms + 2 additional waveforms) 2 x delayed graphs i.e. data from previous iterations. all sampled