Unable to get Pr.Pro to play project.

I am stumped. I am currently unable to play a project that I completed 1.5 weeks ago. The project is open, I ahve both the audio and video on the time line but when i press the space bar to play, nothing happens. I also imported a new project that i copied to the hard drive and same result. I ahve updated adobe prior to doing the first project so don't think that has anything to do with it. Haven't done much since. I did a recovery system to June 16, just to be on the safe side and nothing.
Specs.
12 gb ram
I7 core,
Nvidia 5000 card
Asus P6858D

Hello Leo,
Just a few quick questions:
In the Project Panel, if you Dbl-click on one of the Assets, used on the Timeline, does it open and play in the Source Monitor?
Did you get any dialog boxes, asking "Where is file ____?"
You are not getting any Media Offline indicators, are you?
What are the specs. of the Assets on the Timeline?
Thanks for that info, and good luck,
Hunt

Similar Messages

  • HT3775 unable to get quicktime movies to play on my imac. This is the error message I always get. "The document "4-20130701090400-5.mp4" could not be opened. The movie is not in a format that QuickTime Player understands.You may need to install additional

    Unable to get Quick time movies to play on my imac. This is the error message I allways get.
    "The document “4-20130701090400-7.mp4” could not be opened. The movie is not in a format that QuickTime Player understands.You may need to install additional software to open this type of file."

    Download and install VLC Player. It plays more formats and is free and highly regarded.
    http://vlc-media-player.en.softonic.com/mac
    Cheers
    Pete

  • HT204291 I am unable to get sound to be played through mirroring.

    Sound works when I play a movie on apple TV but if I mirror a movie it doesn't work. I get the image with not sound. Any suggestions?

    I located the button on the iPad next to the volume and it was turned OFF!  Solved that problem!

  • Unable to get Saffire Pro 26 audio interface to work with Windows 8.1

    Can anybody help with compatibility issues between Windows 8.1 (64 bit) and Focusrite Saffire PRO 26 audio interface? I'm using a Firewire PCIe Card. Focusrite registration page pointed me to an installer called saffire-pro-2.61.exe. This installer times
    out on a page called 'Installing device driver (1 of 2) waiting for the Saffire PRO to be connected to the computer (The Saffire Pro device is connected and a powered up and appears in the Device Manager as a device called Focusrite SAFFIRE_PRO26 which is
    listed under the Other devices section of Device Manager with a yellow exclamation mark which appears to be a catch 22 (after all I'm trying to install the drivers). No answer from Focusrite support (due to holidays). Many thanks for any help you can give
    (particularly if someone knows that it should work!).

    Brilliant. This has moved me on.  I wasn't impressed when Focusrite registration presented me with drivers from 2011. You'll probably tell me finding the latest drivers is easy but somehow I failed to find anything in my panic. I have a second issue
    now (Pro Tools 11.2.2 could not initialize the Saffire) but your response seems to have solved the first issue. Thanks!

  • Can't get a DVD to play on my MacBook Pro

    This is the first time I have been unable to get a DVD to play on my MacBook Pro

    Is there a region on the DVD box? Most for the us are region 1.
    Does the DVD dive play other DVDs right now?

  • Can't get Quicktime Pro to function!!????

    Help. As with many other posts, I'm unable to get QT Pro to function. I did everything recommended perhaps 10 times to no avail (registration key, re-install, Quicktime 7...).
    Perhaps there is an Apple Tech person somewhere out there who would like to help with this very curious, frustrating, vexing matter.
    I'd love to be able to use the program but am about to give up.
    Anyone out there from the Apple Corporation listening???
    thank you,
    Dave P.
      Windows XP  

    Aidan,
    Wow, thanks for getting back to me.
    There is just no functionality. The registration (after applying key etc, etc) shows "Quicktime Pro", but it's just nowhere to be found. The Quicktime player just basically remains a Quicktime player. Does that make sense?
    No crashes, no error messages
    again, thanks,
    Dave P.
      Windows XP  

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Unable to get Image Processor Pro to run on Laptop. Creative CC suite.

    Hi, All,
    now i been using the excellent plugin from Russel Brown on my work PC for as long as i can remember. I had to do some work from home on Windows 8.1 Laptop 64Bit.
    However this strange issue as show as image below just unable to get past this point. Seems like something is stuck.  I can close it only. left it for ages. I even tried to trace the system with Microsoft Systemmonitor with no luck.
    I have re-installed the creative cc bridge now three times along with photoshop, cleaning out every reference to data settings etc..Still with same results.
    Even from outside bridge just trying to run the script from Photoshop directly gives the same result.
    Anything have any great suggestion what possibly could be reason. I got a ton of batch conversions i need to save PNGs otherwise i would just just the normal image process.
    Thanks in advance.

    Its Not Adobe Code and its not shipped with Photoshop.  Photoshop versions also has bugs in ScriptUI which is used by scripts with a dialog.  Image Processor Pro 2.3.1 has some bugs. Some files formats its saves may have problems.
    Russell Brown works for Adobe but he has been pulled away from Photoshop.  Xbytor is the programmer that wrote Image Processor Pro he does not work for Adobe and he is feed up with Adobe for not fixing bugs in Photoshop scripting.  He stated he will support Image Processor Pro for some time.
    Russell web site has this. The Open Source code is now available for many of my script and panels
    Because of new projects and a changing demand for my time, it will be necessary for me to move on to new projects at Adobe. For this reason I will no longer be able to support, or update many of my scripts and panels. Never fear! – I am releasing the source code for many of my programs and if you are a programmer then you can use this code to modify and change my scripts to meet your needs. If you are not a programmer then I recommend working with anyone on the list of programmers that I have supplied below. However! Let me make it clear that his code is not to be sold. This is an open and free source to be used for the good of humankind and Adobe Photoshop users around the world
    ===========================
    I do not have a Mac or a Windows 8 machine to test on. On my Windows 7 PC Image Processor Pro 2.3.1 and newer versions run on CS6, CC and CC 2014..  X is still working on it

  • Unable to get area list, access projects

    I'm running RoboHelp Server 9 and I have two issues that could be related.
    First, when I attempt to publish WebHelp Pro from RoboHelp, I am unable to select a Help Area in the SSL dialog. I receive a message stating, "Unable to get area list from server." I opened the RoboHelp Server Web Administrator and verified that the areas are listed.
    Second, when I go into the server and open the RoboHelp Server Web Administrator and select Projects, I receive a message stating, "Communication error. Server is refreshing project data. Try reloading projects pane in a little while."
    I am at a complete loss. Here are things that I or my IT department have tried to do to fix this issue. None of these have worked:
    Change the "reindex" property in the robohelp_server.properties file
    Increase the PermSpace available to Tomcat:
    Run the tomcat-install-dir>/bin/tomcat6w.exe file to open the Apache Tomcat Properties dialog box.
    Verify that the Maximum Memory Pool setting is not blank. If it is blank, then specify a value, such as 512 MB. Make sure that the Maximum Memory Pool and XX:MaxPermSize values don't add up to more than the actual memory you can make available to Tomcat.
    Restart Tomcat.
    Wait 5 – 10 minutes after you publish your project to make sure that the data structure is loaded.
    Rebooted the server
    Removed recent updates from Adobe and Windows.
    Tried using Firefox browser
    I appreciate any help that can be offered.
    Also note that this was not a problem before. I was able to successfully publish to the server, then suddenly I could not.

    Hi Shannon.
    The step that puzzles me is "Removed recent updates from Adobe and Windows". Could you expan on what the Adobe updates were? The reason I ask is that in my experience the application set-up (e.g. Tomcat + RHS) does not react well to removing things. You may have been OK just removing updates but as you have to install the applications in a precise order, removing updates could have messed with the communication between them.
    You certainly seem to have gone through the steps we normally advise in this situation. You could try connecting to the database you are using. If you respond it would be useful to have further information about the physical server and database configuration you are using.

  • I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    I am trying to send an iMovie project to iDVD and I keep getting the following error msg.  "Unable to prepare subject for publishing:  The project could not be prepared for publishing because an error occurred. (-43)"

    Check out this thread: https://discussions.apple.com/thread/1421870
    It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work.

  • HP OfficeJet Pro 8500 A910 - Unable to get it to copy, receive a fax, scan, or print

    Dell Studio
    Microsoft Vista .. 64
    HP OfficeJet Pro 8500 A910
    Up until a week ago, this printer was performing just fine.  I am unable to get it to copy, receive a fax, scan, or print.
    ==============================
    Unable to print.
    Job in queue.  printer screen says "now printing",  However, nothing prints. 
    When I tried to reinstall the drivers, I got  ... "Error 0X00000643"
    Ran "EndError" scan and fixed any/all problems.
    Still ... No Joy.  Still .... Unable to print.
    Tried printing a "Test Page".
    Still No Joy !!
    Screen on printer says "Now Printing"
    However, nothing happens.
    Does anyone have a suggestions?
    Thanks In Advance,
    EarlLJ

    Same problem here. Already got it replaced with a refurb machine three times. Was fine for a while, then it started the same problem again. Any idea, before I toss it out of the window?

  • I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

    I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
    I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
    Is there any way to get more VRAM to play games on steam?
    I've learned  by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
    So the two questions are...
    Is there any way to upgrade my VRAM, so that I can play games on steam?
    Why do I only have 256MB VRAM when I have 8GB total RAM?
    Other Info:
    I have a quad core i7 Processor.
    My graphcics card is the AMD Radeon HD 6490M.
    I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
    THANK YOU SO MUCH IF YOU CAN REPLY,
    Dylan

    The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included).  You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
    If you are very much into gaming, the I suggest A PC.  They are far superior for that type of application to a MBP.
    Ciao.

  • HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

    i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

    Same reply.

  • Previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

  • I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

Maybe you are looking for

  • Mail created with "Send to Mail Recipient" disappear and are not sent

    I have a small setup with a SBS 2011 server (Exchange 2010) 10 users with Windows 8.1 and Outlook 2013. One user is trying to send mails with attachments to his college´s  but they are never send, are not shown in sent items and can not be found on t

  • To handle exception in insert query

    Hi , I am trying it insert certain records from another table A to temp table B, while doing insert i am having exception of unique constraint in table B how can i check which record is throwing exception while inserting in table A for eg: insert int

  • Updated CC 2014  AME to version 2014.2 - CUDA Renderer Option No Longer Available?

    Hi, I just updated my AME CC application to version 2014.2 and the 'Renderer' option to allow use of the GPU CUDA cores is no longer available. Is related to the udpate? Or does the renderer option "Mercury Playback Engine GPU Acceleration (Open CL)"

  • How do you copy a page from preview to duplicate it?

    Hello, I want to copy a page from preview so that I have 2 pages that are the same. Before I upgraded to Maverik, I used to be able to right click on the page (in the sidebar) I wanted, click "copy" then right click in the sidebar and click "paste".

  • Error SOAP

    Hello, In dynpro with interactive form (first time), I have this error when i test : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101). ?ꯂ៸??P What could be the problem ? Best regards, A.HENRY