Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Similar Messages

[SOLVED] ERROR: Unable to determine the file system type of /dev/root:

:: Running Hook [udev]
:: Triggering uevents...done
Root device '804' doesn't exist.
Creating root device /dev/root with major 8 and minor 4.
error: /dev/root: No such device or address
ERROR: Unable to determine the file system type of /dev/root:
Either it contains no filesystem, an unknown filesystem,
or more than one valid file system signature was found.
Try adding
rootfstype=your_filesystem_type
to the kernelcommand line.
You are now being dropped into an emergency shell.
/bin/sh: can't access tty; job control turned off
[ramfs /]# [ 1.376738] Refined TSC clocksource calibration: 3013.000 MHz.
[ 1.376775] Switching to clocksource tsc
That's what I get when I boot my Arch system. It worked fine for quite a while, but suddenly it ran into an error where the SCSI driver module was corrupt. I fixed it by reinstalling util-linux-ng and kernel26, however, I run into this issue now. http://www.pastie.org/2163181 < Link to /var/log/pacman.log for the month of July, just in case. Yes, I bought a new ATI/AMD Radeon HD 5450 this Saturday, but it seemed to work fine till this broke and it works fine on Ubuntu too, so I suppose we can rule it out.
Last edited by SgrA (2011-07-05 20:45:36)

Autodetection failed on your first image, in both your previous kernel installs:
[2011-07-04 16:14] find: `/sys/devices': No such file or directory
Which means that sysfs was not mounted. You should be able to boot from the fallback image, which does not use autodetect. Figure out why /sys isn't mounted, as well, and fix that.
This is also a somewhat crappy bug in mkinitcpio that lets you create an autodetect image that's useless. It'll be fixed in the next version of mkinitcpio that makes it to core.
Last edited by falconindy (2011-07-04 17:41:19)

Trying to use grid control to get historic file system information

Hi.
I need to get the file system historical information for a year. I need to be able to say how in the past year such and such a file system has increased in space etc.
I am using OEM Grid Control. I have been trying to find this information this way:
Home/Local File Systems/click on specific file system and then View Data for one year.
Trouble is, this bview is more visual than statistical. I need hard figures!
Is this the right way? Should I try another approach? This must be a common request?
Oracle 10.2.0
DA
Thank you.

Querying the tables/views inside OEM Grid Control (GC) Repository - the database - may help. By default, GC stores information into tables owned by SYSMAN and aggregates the information on a pre-defined schedule, like first week, first month, first year, etc depends on the definition. So you might not find some details of the historical information.
Try mgmt$metric_daily to get the numbers. You would need target_guid from mgmt$target to pinpoint the server.
Not sure 100% all details you are looking for, which will determine the metrics to query. But anyway here is a simple example. Hope it helps. The Oracle documentation has more details.
SELECT metric_name,metric_column,
TO_DATE(TO_CHAR(rollup_timestamp,'YYYY-MM-DD'), 'YYYY-MM-DD') AS month_timestamp,
maximum value
FROM mgmt$metric_daily
WHERE target_guid='......'
AND metric_label = 'Storage Summary'
AND metric_column = 'local_fs_used'

I cannot get the file "Photoshop_13_LS16.7z" for Photoshop CS6, Photoshop CS6 Extended English to download; the url goes to an ascii file on screen.

I cannot get the file "Photoshop_13_LS16.7z" for Photoshop CS6, Photoshop CS6 Extended English to download; the url goes to an ascii file on screen. It's at Download CS6 products. Can you help?

use a different browser.
you can also try dl'g from prodesigntools.com
if you follow all 7 steps you can directly download a trial here: Download CS6 products
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

I am not getting the verification e mail, for my apple id and unable to use the apple store

Hi There,
I am uable to get the verification e mail for my apple id and unable to use the apple store.
Regards,
Ameera

G to appleid.apple.com and then to manage ID and see if you can get the ID working there

Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.

PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards Bernhard

IPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan

Setting the file system size for the emulator

Hi,
I am trying to set the file system size of the emulator so I can test what happens when the system is full and I try to write to the file system. I am using WTK 2.5.1 and I went into preferences -> storage and set Storage size to 10KB. But when I run the emulator and check the available size of the root directories using:
try {
         Enumeration roots = FileSystemRegistry.listRoots();
         while (roots.hasMoreElements()) {
            String dir = (String) roots.nextElement();
            FileConnection fc = (FileConnection) Connector.open( "file:///" + dir );
            System.out.println( "Available Size on " + dir + " : "+ fc.availableSize());
            fc.close();
      } catch ( IOException ex ) {
         ex.printStackTrace();
}I get the remaining size of my pc's hard drive, not what is remaining from the 10KB I set.
Can you tell me the correct way to do this? I don't want to fill up my pc's hard drive in order to test this!!

Has anyone got an answer to this?

CSS '%% The File System is not mounted.' error.

While I first thought that this was a hardware problem, I've had it happen to 3 of my CSS 11503s in the last 2 weeks. I logged into the CSS and found that the prompt had gone back to the default prompt. Upon further investigation, I was not able to do a write mem - it would just return the following error:
%% The File System is not mounted.
Has anyone seen this before? I went to reboot the unit, but I've lost access to it. I'm actually going to the datacenter today to check it further, but I was hoping someone might be able to tell me if this is a bug or software issue I might need to worry about. Any help would be appreciated. Thanks!
Additional info:
CSS 11503 - failover pair running in one-armed mode.
Version: sg0730203 (07.30.2.03)
Flash (Locked): 07.30.2.03
Flash (Operational): 07.30.2.03
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
Jason

Looks like you have a hard disk failure.
Reboot the CSS and let it go through a full diagnostic.
If it does not work after reboot, you will need to replace the unit.
If it works, this could be a one-time error.
If the error comes back, definitely replace the box.
Gilles.

Unable to get the java system reports

Hi all
In portal we are unable to get java system reports
Thanks in advance

It seems that your WAS installation is not fully configured and / or can you check the domain name in the IGS url? Please follow these links.
Re: Graphics Rendering Problem
Re: Error connection IGS
Regards,
Nitin

Warming up File System Cache for BDB Performance

Hi,
We are using BDB DPL - JE package for our application.
With our current machine configuration, we have
1) 64 GB RAM
2) 40-50 GB -- Berkley DB Data Size
To warm up File System Cache, we cat the .jdb files to /dev/null (To minimize the disk access)
e.g
// Read all jdb files in the directory
p = Runtime.getRuntime().exec("cat " + dirPath + "*.jdb >/dev/null 2>&1");
Our application checks if new data is available every 15 minutes, If new Data is available then it clears all old reference and loads new data along with Cat *.jdb > /dev/null
I would like to know that if something like this can be done to improve the BDB Read performance, if not is there any better method to Warm Up File System Cache ?
Thanks,

We've done a lot of performance testing with how to best utilize memory to maximize BDB performance.
You'll get the best and most predictable performance by having everything in the DB cache. If the on-disk size of 40-50GB that you mention includes the default 50% utilization, then it should be able to fit. I probably wouldn't use a JVM larger than 56GB and a database cache percentage larger than 80%. But this depends a lot on the size of the keys and values in the database. The larger the keys and values, the closer the DB cache size will be to the on disk size. The preload option that Charles points out can pull everything into the cache to get to peak performance as soon as possible, but depending on your disk subsystem this still might take 30+ minutes.
If everything does not fit in the DB cache, then your best bet is to devote as much memory as possible to the file system cache. You'll still need a large enough database cache to store the internal nodes of the btree databases. For our application and a dataset of this size, this would mean a JVM of about 5GB and a database cache percentage around 50%.
I would also experiment with using CacheMode.EVICT_LN or even CacheMode.EVICT_BIN to reduce the presure on the garbage collector. If you have something in the file system cache, you'll get reasonably fast access to it (maybe 25-50% as fast as if it's in the database cache whereas pulling it from disk is 1-5% as fast), so unless you have very high locality between requests you might not want to put it into the database cache. What we found was that data was pulled in from disk, put into the DB cache, stayed there long enough to be promoted during GC to the old generation, and then it was evicted from the DB cache. This long-lived garbage put a lot of strain on the garbage collector, and led to very high stop-the-world GC times. If your application doesn't have latency requirements, then this might not matter as much to you. By setting the cache mode for a database to CacheMode.EVICT_LN, you effectively tell BDB to not to put the value or (leaf node = LN) into the cache.
Relying on the file system cache is more unpredictable unless you control everything else that happens on the system since it's easy for parts of the BDB database to get evicted. To keep this from happening, I would recommend reading the files more frequently than every 15 minutes. If the files are in the file system cache, then cat'ing them should be fast. (During one test we ran, "cat *.jdb > /dev/null" took 1 minute when the files were on disk, but only 8 seconds when they were in the file system cache.) And if the files are not all in the file system cache, then you want to get them there sooner rather than later. By the way, if you're using Linux, then you can use "echo 1 > /proc/sys/vm/drop_caches" to clear out the file system cache. This might come in handy during testing. Something else to watch out for with ZFS on Solaris is that sequentially reading a large file might not pull it into the file system cache. To prevent the cache from being polluted, it assumes that sequentially reading through a large file doesn't imply that you're going to do a lot of random reads in that file later, so "cat *.jdb > /dev/null" might not pull the files into the ZFS cache.
That sums up our experience with using the file system cache for BDB data, but I don't know how much of it will translate to your application.

Any way within XI to explore the file system

Hi all
please let me know whether thereu2019s a way from within XI to explore the file system? For the abap part we can use transaction u201CAL11u201D to browse the directories mounted to the Application server, but I do not expect our directory to be mapped to the server.
Kind Regards,
Anshu Kumar

Hi ,
Thanks for you answer ,but I am asking without remote desktop connection and vpn.is there anyway ?
Kind Regards,
Kumar

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Function module to get the file path in the system for TEMP folder

Hi All,
Is there any function module that I can use to get the file path in the system for TEMP folder.
I mean, i am supposed to give only TEMP as the input for that function module and I need to get the path of that in the system as the output.
I am unsing 4.0 version.
Please advice.
Regards
Ramesh

In Higher versions, we can use the below code:
call method CL_GUI_FRONTEND_SERVICES=>ENVIRONMENT_GET_VARIABLE
    exporting
      VARIABLE   = 'TEMP'
    importing
      VALUE      = LV_TMP
    exceptions
      CNTL_ERROR = 1
      others     = 2.
if SY-SUBRC <> 0.
    message id SY-MSGID type SY-MSGTY number SY-MSGNO
    with SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call method CL_GUI_CFW=>FLUSH
    exceptions
      CNTL_SYSTEM_ERROR = 1
      CNTL_ERROR        = 2
      others            = 3.
if SY-SUBRC <> 0.
Error handling
endif.
concatenate lv_tmp '\' into folder_path.
But need to know in the lower versions like 3.1h and 4.0,

Why am I getting this error message: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk s

I am getting this error message, just starting today: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox. I have tried several solutions (cleaning out my inbox, compacting folders, rebooting, checking through the webmail side), all to no avail, Can anyone help?

which os do you have?

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

Similar Messages

Maybe you are looking for