Unable to get the graphical display of Business process in BPMon

Hi,
I am working on solution manager 7.1. I have set up a business process for monitoring in the BPMon session. But i am not getting the graphical display in the business process operations workcenter in the graphical view tab.
Can anyone tell me how can i get that.
Regards
Vishal

Hi,
Please run run report RTCCTOOL and see if any addon is not up-to-date.
Please run this repport and follow the recommendations to update those
components to the latest status.
Afterwards please also intall the latest version of following note: 1570282 - Advance Corr. BPMon ST-A/PI 01N
Finally please deactivate BPMon, regenerate and re-activate agin.
Also check BPM troubleshooting guide:
https://websmp102.sap-ag.de/~sapdownload/011000358700001186112010E/
Troubleshooting_for_BPMon.pdf
Thanks
Vikram

Similar Messages

  • Unable to get the form displayed in Working Time

    Hi,
    We are implementing ESS with ECC5.0 on EP6. When I go for Working time and click on Time Statement for a Chosen period .. below it doesn't display me the form needed.
    I have checked from the Tx : HRFORMS, the Form Name :SAP_TIM_99_0001 & 0002 are active.
    Is there anything else i need to configure at the r/3 end to get that display on portal?
    Need help on this ..
    Thnks in advance.
    Vijay

    Hi Aniket,
    To the Clusters .. do you mean at the j2ee engine side?can you please give me info in detail
    Thnx for valuable inputs
    Vijay
    Message was edited by:
            NR

  • I am unable to get the HUD display to appear...help

    My first use of my new CS5 is was to try the new HUD color picker.  I picked a brush tool...held down shift+alt+right-click and went of the image and held it.  Nothing happened.  I just get a cursor with the eye-dropper and a plus sign onder it and a little circle above it.  I watched it on Lynda.com. but was unable to replicate what I saw.  I tried it on my laptop and my desktop.  Both...nothing.  I set it to both wheel and strip in preferences.
    Need help with this...thanks.

    I tried to set this in preferences...but it will not allow me to with the laptop.  I upgraded the drivers to the desktop and it works there...but the Fujitsu T5010 does not have the openGL capabilities needed.
    Thanks for the input.  Sure appreicate that.

  • Unable to get the accounting documents in Sales process

    Hi All,
    While running the Sales Business cycle, accounting documents are not generated for any goods movement i.e. MB1C (561), MB31 (101) and also PGI. But the accounting document is generated while doing the billing. I have checked the settings of OBYC and OMS2.
    Please tell me the solution to resolve this.
    Thank you,
    Satya

    Hi Benni,
    THank you for your reply.
    Accounting documents are not generating for both movement types i.e. initial stock entry (561) and Delivery (601).
    Thank you,
    satya

  • HT204291 I have downloaded latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

    I have downloaded the latest software to my Apple TV, but I am unable to get the airplay icon to display on either my iPhone5 or iPad2. Both have iOS7 installed. The Apple TV connects to the wifi successfully. Any ideas please?

    Can we assume you are bringing up the "Control Center" and the Airplay icon is not there?
    http://www.apple.com/ios/whats-new/
    Do you have the "AirDrop" icon?

  • Error while applying a patch "Unable to get the database connection"

    Dear Experts,
    A patch which got successfully applied is failing Production and the error is kind of surprising to me.
    Apps version is 11.5.10.2
    db version is 10.2.0.4
    The worker log file shows
    Time when worker restarted job: Thu Nov 24 2011 22:14:52
    Start time for file is: Thu Nov 24 2011 22:14:52
    adjava -ms128m -mx256m -nojit oracle.apps.fnd.odf2.FndXdfCmp &un_apps &pw_apps &un_apps &pw_apps &jdbc_protocol &jdbc_db_addr table &fullpath_pa_patch/115
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
      Temporarily resetting CLASSPATH to:
      "/erp/oracle/prodappl/ad/11.5.0/java/adjri.zip:/usr/java14/jre/lib/charsets.jar:/usr/java14/jre/lib/core.jar:/usr/java14/jre/lib/graphics.jar:/usr/java1
      Calling /usr/java14/bin/java ...
    Exception occured
                  Copyright (c) 2003 Oracle Corporation
                     Redwood Shores, California, USA
             XDF(XML Object Description File) Comparison Utility
                            Version 1
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    Unable to get the database connection using schema username/passwordIo exception: The Network Adapter could not establish the connection
    AD Run Java Command is complete.
                         Copyright (c) 2002 Oracle Corporation
                            Redwood Shores, California, USA
                                        AD Java
                                     Version 11.5.0
    NOTE: You may not use this utility for custom development
          unless you have written permission from Oracle Corporation.
    AD Worker error:
    The above program failed.  See the error messages listed
    above, if any, or see the log and output files for the program.
    Time when worker failed: Thu Nov 24 2011 22:14:53
    {code}
    The error says database connection error.  I am able to connect to the database using sqlplus.  I tried to restart the failed worker, but the same error is repeating. 
    Any help would be appreciated.
    Thanks
    qARS
    Edited by: user7640966 on Nov 24, 2011 9:07 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hussein,
    One thing which I noticed now is in the apps Tier the
    tnsnames.ora under $TNS_ADMIN
    shows entry like this:
    PROD=
            (DESCRIPTION=
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<appsServerName>)(PORT=1521))
                    (ADDRESS=(PROTOCOL=tcp)(HOST=<dbServer>)(PORT=1521))
                (CONNECT_DATA=
                    (SID=PROD)
            )Actually *(ADDRESS=(PROTOCOL=tcp)(HOST=<appsIPaddress>)(PORT=1521))* this line in the tnsnames.ora is not correct. In fact the appsServerName should be replaced with dbServerName
    I deleted the tnsnames.ora and reran autoconfig but it is again recreating the same entry.
    Any clue how this can be fixed?
    Thanks
    qARS

  • Unable to get the item value in cursor

    I have function which returns organization_id for each item selected in Sales Order window.
    From this function I will populate warehouse value in shipping tab whenever i am tabbing out from ordered item in Sales Order Form.
    But my cursor is unable to get the item id value (Ex: FOR cur_rec IN cus_l (l_item_id)). It is directly going to last return statement and displaying default value.
    Please help me out.
    FUNCTION custom_default_rule (
    p_database_object_name IN VARCHAR2,
    p_attribute_code IN VARCHAR2
    RETURN NUMBER
    AS
    l_line_type_rec oe_order_cache.line_type_rec_type;
    l_item_id NUMBER;
    p_org_id NUMBER;
    CURSOR cus_l (p_item_id IN NUMBER)
    IS
    SELECT a.organization_id, b.element_name, b.element_value
    FROM mtl_parameters a,
    mtl_descr_element_values b,
    mtl_system_items_b c
    WHERE b.inventory_item_id = c.inventory_item_id
    AND a.organization_id = c.organization_id
    AND a.organization_id = c.organization_id
    AND c.inventory_item_id = p_item_id
    AND a.organization_id <> a.master_organization_id
    ORDER BY a.organization_id;
    CURSOR cur_org (p_org_id IN NUMBER)
    IS
    SELECT organization_code
    FROM mtl_parameters
    WHERE organization_id = p_org_id;
    BEGIN
    l_line_type_rec :=
    oe_order_cache.load_line_type
    (ont_line_def_hdlr.g_record.line_type_id);
    l_item_id := ont_line_def_hdlr.g_record.inventory_item_id;
    FOR cur_rec IN cus_l (l_item_id)
    LOOP
    IF cur_rec.element_name IN
    ('Frequency',
    'Emission Norms',
    'Voltage',
    'Duty Rating',
    'Phase',
    'Product Family'
    AND cur_rec.element_value IN
    ('50',
    'Dual',
    'Euro',
    '210',
    '230',
    '440',
    'Low',
    'Medium',
    'Heavy',
    'Three',
    'QSK60',
    'QSK15',
    'QSK10',
    'DQK50'
    THEN
    RETURN cur_rec.organization_id;
    If u want more info. abt function refer: Refer "PL/SQL API + Defaulting Rules in OM" in Forums.oracle.com
    (OR)
    PL/SQL API + Defaulting Rules in OM
    Please help me out. This is very urgent.
    Thanks & Regards,
    Sateesh Kumar

    Hi Suresh,
    I tried like below:
    create or replace FUNCTION custom_default_rule (
    p_database_object_name IN VARCHAR2,
    p_attribute_code IN VARCHAR2
    RETURN NUMBER
    AS
    l_line_type_rec oe_order_cache.line_type_rec_type;
         l_line_rec OE_AK_ORDER_LINES_V%ROWTYPE;
    l_item_id NUMBER;
    p_org_id NUMBER;
    CURSOR cus_l (p_item_id IN NUMBER)
    IS
    SELECT a.organization_id, b.element_name, b.element_value
    FROM mtl_parameters a,
    mtl_descr_element_values b,
    mtl_system_items_b c
    WHERE b.inventory_item_id = c.inventory_item_id
    AND a.organization_id = c.organization_id
    AND a.organization_id = c.organization_id
    AND c.inventory_item_id = p_item_id
    AND a.organization_id <> a.master_organization_id
    ORDER BY a.organization_id;
    CURSOR cur_org (p_org_id IN NUMBER)
    IS
    SELECT organization_code
    FROM mtl_parameters
    WHERE organization_id = p_org_id;
    BEGIN
    l_line_type_rec :=
    oe_order_cache.load_line_type(ont_line_def_hdlr.g_record.line_type_id);
         l_line_rec := ONT_line_Def_Hdlr.g_record;
    --      l_item_id := l_line_rec.inventory_item_id;
    -- FOR cur_rec IN cus_l (l_item_id)
         FOR cur_rec IN cus_l(l_line_rec.inventory_item_id)
    LOOP
    IF cur_rec.element_name IN
    ('Frequency',
    'Emission Norms',
    'Voltage',
    'Duty Rating',
    'Phase',
    'Product Family'
    AND cur_rec.element_value IN
    ('50',
    'Dual',
    'Euro',
    '210',
    '230',
    '440',
    'Low',
    'Medium',
    'Heavy',
    'Three',
    'QSK60',
    'QSK15',
    'QSK10',
    'DQK50'
    THEN
    RETURN cur_rec.organization_id;
    FOR cur_rec_org IN cur_org (p_org_id)
    LOOP
    RETURN cur_rec_org.organization_code;
    END LOOP;
    END IF;
    END LOOP;
    RETURN '204';
    EXCEPTION
    WHEN OTHERS
    THEN
    IF oe_msg_pub.check_msg_level (oe_msg_pub.g_msg_lvl_unexp_error)
    THEN
    oe_msg_pub.add_exc_msg ('OE_Default_PVT', 'CUSTOM_DEFAULT_RULE');
    END IF;
    RAISE fnd_api.g_exc_unexpected_error;
    END custom_default_rule;
    This function executed without errors. But it is displaying final return statement value (i.e., 204).
    I am not getting inventory_item_id value to my cursor.
    Please help me out...It is very urgent.
    Thanks & Regards,
    Sateesh Kumar S
    Message was edited by:
    user610830

  • Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

    One of our DPs has stopped loading content. 
    I've research for quite a bit and cannot find a clear cut reason to this.  This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
    packages.  The disk drive is still present I can still reach the hidden share \\servername.com\E$
    Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015 
    SCCM 2012 R2 
    OS 2008 R2 Standard
    Any help is greatly appreciated!
    Here's a snipit from the distmgr.log
    Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
    Attempting to add or update a package on a distribution point.
    Will wait for 1 threads to end.
    Thread Handle = 0000000000001E48
    STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
    8252 (0x203C)
    The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
    Successfully made a network connection to \\*****.com\ADMIN$.
    Ignoring drive \\*****.com\C$\.  File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
    Unable to get the file system information for: \\*****.com\E$\; error = 64.
    Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
    Cannot find or create the signature share.
    STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
    Error occurred. Performing error cleanup prior to returning.
    Cancelling network connection to \\*****.com\ADMIN$.

    Error 64 is being returned which is simply "the network name is no longer available".
    There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
    you just put a C-name in). I'd start from the top:  Try opening said share from the Primary Site server as that's the box doing the work.  Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
    RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
    At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. 

  • Unable to get the print option in network for Services

    Hi Experts
    I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference
    Thanks in Advance
    Ambarish

    Hi Ambarish,
    There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement  only  . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
    Also check whether you have required authorization to  print from SAP
    I hope so it will help you
    Regards,
    Aparna

  • Unable to get the Approve option in  Salary form

    hi friends,
    we are implementing payroll using UAE localisation, when i try to add new salary for an employee i am unable to get the approve option in the salary form..we are working on version 11.5.10.2..i have the given the setup steps below
    HRMS Responsibility>People>assignment>salary >add New Salary..
    I have attached the function the" Salary Approval" to the menu also..even we have bounsed the apache server also...still we face the same problem we are unable toget the approve option still we can see only the proposed optionand we are unable to enter the new salary for the employees...
    Pleae advise your better openions to over come this..
    Thanks and Regards
    Raj

    Hi Ambarish,
    There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement  only  . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
    Also check whether you have required authorization to  print from SAP
    I hope so it will help you
    Regards,
    Aparna

  • Unable to get the "Alerts" in the bi dashboard

    Hi experts,
    I am using Oracle business intelligence standard edition one version, I am using Delivers to send Email. I did all the configuration successfully and I am able send the email. But unable to get the "Alerts" anywhere in the dashboard after clicking save in Delivers.
    Please help me to how to bring the "Alerts" highlighted in the BI Dashboard.
    Regards,
    Raj

    How about permission on Admin> Previlages > Manage Previlages > delivers make sure it for everyone
    Also make sure you have _Delivers folder.
    In order to get a list of all the ibots that are sent to you(Interactive Dashboard should be part of your Active Delivery Profile) create a section in your Dashboard and rename that section as _Delivers. That will show all the list of ibots.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Adobe CS 5.5 Photoshop error I get the message "display driver stopped responding".

    I just purchased and installed Adobe CS 5.5. I launched Photoshop and when I tried to view an image photoshop crashed and I get the message "display driver stopped responding". I couldn't do anything after that. I have HP elitebook laptop, not sure if that makes a difference. Please advise and what I can do to fix the problem.

    Go to the HP site and update your graphics driver:
    HP Support, Drivers, Contact and Help Forums | HP® Support

  • PS has given up waiting for an assessment of the graphics display driver?

    I replaced my graphics card because it was not supported and  some PS CC graphics functionality (smart sharpening, etc) wouldnot operate. I purchased and installed a new Gigabyte AMD HD7770 as per the list of supported cards. The latest drivers have been installed. (Windows 7 64bit)
    I am now getting a message "PS has given up waiting for an assessment of the graphics display driver. Enhancements that use the graphics hardware have been disabled. Check the manufacturer's website site for the latest software."
    What is happening? Why am I paying for features that I cannot access despite having gone to the expense of purchasing a new card and following the PS CC requirements to the letter?
    This is very frustrating and annoying.
    Addendum: I am now getting a message that 3D requires a minimium of 512Mb of vRAM. However, my new card is 1 GB......?????????
    Can someone provide a solution for this problem please?

    The best thing to do is to go into Help > System Info, copy and paste the contents into your reply.
    One of us or several should be able to sort it out for you.
    Gene

  • Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

    I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off".  I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
    Can somebody advice.
    Thanks

    Can you please confirm me the following steps...
    Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
    Make sure your setting for that composite is not Off, keep inherit or production or development.
    Thanks,
    N

  • Unable to get the values from PAYLOAD

    Hi,
    i'm unable to get the values of payload. When i use
    currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
    Element payload = (Element)currentTask.getPayloadAsElement();
    node = (Element)payload.getFirstChild();
    System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
    I get null but i instantiate the bpel process with a value and i have
    - <payload>
    - <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
    <ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
    <ns1:documentName>bvnbvnvn</ns1:documentName>
    <ns1:URI>http://www.first.pt</ns1:URI>
    <ns1:assignees>gestdoc</ns1:assignees>
    <ns1:groups />
    </ns1:DocumentReviewProcessRequest>
    </payload>
    if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
    I get a normal erro 'cause this variable don't exist...
    Can someone please help me?
    Thanks!!

    I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
    Like this:
    com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
    Please reward the points if this helps.

Maybe you are looking for