Unable to go to, one of my webapplication.

Hi,
I have issue , where am unable to login to the webapplication , its site collections, its sites, its subsites.
I got an error : This page can't displayed.
Below is the screen shot:
when  i tried to check TLS 1.1, TLS 1.2, Unable to do so.
Thanks
Badri

Hello Badri,
Are you able to open site in another browser or in another machine? What happens when you open your site in SP server itself?
Are you using SSL for your site?
This is very common error so need more detail from you.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

  • HT1420 My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize n

    My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize new Laptop?

    You can only deauthorize everything to do that. Click on Account under Quick Links. You can deauthorize all five there. But you can only do this once a year.

  • Wifi option is greyed out and after resetting the setting my 4s unable to call any one or unable to recharge money....???

    WiFi option is grayed out and after resetting the setting my 4s unable to call any one or unable to recharge money....???

    the same thing happened to me. Last time this happened i held the home and power button until the phone turned off, then i turned it on and let it charge and it worked. Now it won't let me get past the Apple sign flickering every 5-10 seconds.

  • Unable to update htc one m8 factory unlocked

    Hi I recently purchased HTC one m8 32 gb factory unlocked verizon & using in India with GSM provider, everything works fine however i am facing 2 major issues
    unable to update software - it mentions software update only available in cdma mode however i am using gsm
    extremely slow charging- charging is really slow, to the point where had to put phone on charger for 24 hours to get it 100% charged
    It does not have extreme saving mode as well

    B33 wrote:
    Well Verizon Customer Service open's in couple Hours you might give em Call and ask how you could get the update they may put you in touch with there Global Services Team..
    Here is there Number..  To call them..  They don't have Email any longer they have a chat option but I don't how easy it is to go that Route so my suggestion if you can call is use the Numbers below..
    1-800-922-0204  or *611
    If the OP isn't a customer of Verizon Wireless, the reps aren't going to be able to assist the OP.

  • Unable to start Sun One Web Server 6.1 SP5 64bits on Solaris 10

    Hello,
    I installed the Sun One Web Server 6.1 SP5 64bits successfully on a Solaris 10 machine, but was unable to started up the web server application:
    The error message is below,
    # pwd
    /app/SUNWwbsvr61sp5/https-admserv
    # ls
    ClassCache config restart SessionData stop
    conf_bk logs rotate start webapps
    # ./start
    Sun ONE Web Server 6.1SP5 (64-Bit) B12/02/2005 04:37
    failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /app/SUNWwbsvr61sp5/bin/https/lib/libj2eeplugin.so failed (ld.so.1: webservd: fatal: libjvm.so: open failed: No such file or directory)
    I have searched the forum and found some what similar case but it was for SP4.
    Please if anyone had experienced with this please advise how to resolve this issue.
    I greatly appreciated,
    Thank you
    Edited by: n2sun on Jun 12, 2008 10:15 AM

    just check the env file for the user who is starting or running that.
    say if it is cshell, you can see the following variables in the .cshrc which will be under the user's home directory
    setenv JAVAHOME  WS_Root/jdk
    setenv LD_LIBRARY_PATH  WS_Root/lib: /libnow source that file
    source .cshrcthen start the webserver.

  • How Secure one folder in Webapplication of Tomcat

    Hi Everybody,
    Really It's very urgent
    I developed one webapplication in Tomcat5.0 container.
    My folder structure is like this
    C:\Tomcat 5.0\webapps\Test\jsp
    C:\Tomcat 5.0\webapps\Test\images
    C:\Tomcat 5.0\webapps\Test\imp
    By accessing in the IE i m able to aceess that folder including that documents.
    Like : http://localhost:8080/Test/imp/a.doc
    http://localhost:8080/Test/imp/b.doc
    http://localhost:8080/Test/imp/c.doc
    I don't give access to imp folder and documents inculded in that folder...
    Thanks in advance..
    regards
    Sridhar

    If you don't want people to access them over the web, you can put them under the WEB-INF folder. Anything under WEB-INF is not accessible to the casual browser, but can be retrieved using a forward/include.
    Also you could look at security constraints in your web app.
    You can get an idea about it here: http://www.caucho.com/resin-3.0/security/tutorial/security-basic/index.xtp

  • Unable to deploy same solution on different webapplication

    Hi,
    I have one farm having multiple web applications in sharepoint 2010.
    My frient had deployed one solution having different webparts,events and jobs on 2-3 webapplications.
    Now, I have created new webapplication and m trying to deploy that same solution code on my new application,but its showing error like,
    "Error occurred in deployment step 'Retract Solution': Object reference not set to an instance of an object".
    I tried to reract it from VS then its showing error-Object reference not set to an instance of an object.
    What should I do to deploy this solution on my new webapplication.?
    Anybody got this of issue before please suggest any way...
    Thanks
    Vyankatesh

    Hi All
    My Issue us resolved .
    The issue was because I dont have proper permission of Sharepoint web.config in database.
    Below links helps me lot,
    http://www.sharepointassist.com/2010/10/24/error-occurred-in-deployment-step-add-solution-the-execute-permission-was-denied-on-the-object-proc_putobject-database-sharepoint_config-schema-dbo/
    Thanks.

  • Macbook (10.4.11) unable to connect to one wireless network

    We have one student who is unable to connect to our student wireless network. He's using a Macbook (black) with 10.4.11 and all updates. He's got a stock Airport card. We have an Airport Extreme broadcasting the network. Other students are able to connect without any problem. He's able to connect to our teacher's network without any problem.
    When we try to connect his airport to the student network, it reports "There was an error joining the AirPort network 'Riverstone Students'." No further information is provided. I've tried removing it from his preferred networks, removing the key from the keychain, and reconnecting, but no change.
    Any suggestions gratefully received!

    Just found out a little info about my work network. We are using a SMC Network 8014 W-G broadband modem and a Linksys WAP11 Wireless Access Point, and the security is WEP. I have tried to login to the device webpage to check/adjust settings but nobody here knows the password and "admin" doesn't work. I really don't want to do a hard reset and take the chance of screwing up the network for everybody in the office (apparently it was quite complicated to set up when they first installed it, I wasn't around then). Does anybody have any other ideas? Thanks

  • Unable to backup from one external USB drive to another

    Hi all, this one's been doing my head in for a few days and now I'm waving the white flag of surrender and deciding to ask on here.
    I'm trying to backup some of my video files off one of my external HDDs onto another external HDD (or DVD - more on that in a minute) but I don't appear to be able to do so. The files I'm attempting to back up are either my own DVD rips or iTunes Movie purchases, since we don't yet have Movies in the Cloud in the UK. At various points during the copy procedure I get the following messages:
    The Finder can't complete the operation because some data in <<various names>>.m4v can't be read or written. (Error code -36)
    then, after clicking OK, I get:
    The operation can't be completed because one or more required items can't be found (Error code -43)
    If I use Finder to navigate to the offending named file, there it is in its original place on external disk 1 all nice and happy. In iTunes the file is in the playlist and is perfectly playable. I have turned off "enable disks to sleep where possible" in Preferences to see if one or the other may be going to sleep during the operation. If I use Disk Utility to verify the two HDDs in question both come up as OK. User Permissions are of course off for the external drives and I have tried reformatting the 2nd drive jsut in case. Obviously I can't reformat drive 1 since it contains the data I'm trying to back up and since I can't back it up......you get the idea.
    If I try to use a DVD to backup the media files I'm getting the same errors, along with (in the case of an external DVD drive) something about comunnication between the computer and the drive has failed. Now I'm fairly sure I should be able to backup my data for archiving purposes so does anyone have any idea what could be casuing this problem?
    I'm currently trying again, using yet another external drive and to copy just over 18.5GB it's giving me an estimated completion time of 15 hours and has seemingly frozen on 50.3MB copied! Now I know USB 2.0 is slow by today's standards but still I feel this is a little excessive. It's now down to 3 hours estimated but keeps pausing and climbing to 15+ then back down again. I'm guessing it's either a read error from disk 1 or a write error to disk 2 but since Verify Disk is showing both are OK I'm not sure how to tell which. And now I just got the error messages quoted at the top of the page again.
    OK, ideas anyone.....

    You can copy the entire  to a file.  Use the dmg extension.  Double click on file to mount.
    Perhaps you should run disk utility on the drive. Maybe the filesystem is mess up.
    Do a  bit-by-bit copy
    You can use the following command to display all partitions:
    Macintosh-HD -> Applications -> Utilities -> Terminal
    # This is a little deep.
    #It is  best to do the pdisk command before you eject the external hard drive. Now, eject the external hard drive.  Do another pdisk command to see what drive name has disappeared.  The disappearing name is the name of your external hard drive.
    sudo pdisk -l
    #for details...
    man pdisk
    # Do a  bit-by-bit copy.
    #eject the partition in the normal GUI
    Macintosh-HD -> Applications -> Utilities -> Terminal
    dd if=/dev/disk0s10 bs=4096 | gzip | dd of=~/disk0-s10 bs=4096
    #this can take awhile. Open another window and do ls -l ~/disk0-s10
    # Here is  how to restore the partition.
    dd if=~/disk0-s10 bs=4096 | gunzip | dd of=/dev/disk0s10 bs=4096
    Don't zero out your unused records, since you are having problems with your disk.
    Here is another way to run the command. When you run the command in the background you can question how for the process has gotten.  Adjust or eliminate count as needed.
    mac $ dd if=/dev/zero  bs=1024 count=1kx1k of=/Volumes/MacOSFirewire/zero&
    [1] 510
    mac $ man kill
    mac $ kill -s siginfo 510
    953197+0 records in
    953196+0 records out
    976072704 bytes transferred in 82.524495 secs (11827673 bytes/sec)
    mac $ 1048576+0 records in
    1048576+0 records out
    1073741824 bytes transferred in 89.700333 secs (11970322 bytes/sec)
    Here are two utilities for making a complete backup of your internal hard drive.  I've recommend using one of these so that you can create a bootable system  on your external hard drive. ( PPC require a firewire connected drive. )  Once created, you can run your system from the external drive.  Hold down the option key on your keyboard then power on your machine.  This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
    "Clone, synchronize, backup. Schedule and forget it."
    http://www.bombich.com/software/ccc.html
    "SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

  • Mail on 10.6.2 - unable to send on one account and the other slow to send

    Having two large issues with mail on my new Mac/10.6.2:
    1. GMAIL account: since upgrading to 10.6.2 I can no longer send mails. I have tried removing the smtp details and re-adding, with and without SSL and finally removing the email account altogether and redoing the whole setup and all to no avail. When I click send it just gives a continuous spinning wheel on the sending box
    2. The other mail account (on my wifes login) takes about 40-60 seconds to send even a one word email. On 10.4 it was instantaneous. Reading the threads 10.6.2 was supposed to address the issue from 10.6.0 but it seems not
    Any help hugely appreciated

    I did get a "stock" response from Apple support, and I am pasting it below.
    While it may help some of you, for me it is NOT a solution. It is as if Apple does not even want to acknowledge this major bug.
    I temporarily got around the problem by identifying that the parental controls are actually blocking DNS resolution, and not access to the sites themselves!
    Therefore, I added the wildcard SSL website to the /etc/hosts file with it's corresponding IP address as to bypass DNS lookups for it. As long as the IP address does not change all will be OK, so I still do not consider this a fix.
    =========== Apple Response ==========
    +Secure (HTTPS) websites need to be added to the list of allowed sites (white list). For each site that needs to be added, use the "host" command in Terminal with the domain name to obtain its IP address, then use the host command with the IP address to obtain the reverse domain name. For example:+
    +$ host gmail.com+
    +gmail.com has address 74.125.127.83+
    +gmail.com has address 209.85.225.83+
    +gmail.com has address 74.125.79.83+
    +gmail.com mail is handled by 30 alt3.gmail-smtp-in.l.google.com.+
    +gmail.com mail is handled by 5 gmail-smtp-in.l.google.com.+
    +gmail.com mail is handled by 10 alt1.gmail-smtp-in.l.google.com.+
    +gmail.com mail is handled by 20 alt2.gmail-smtp-in.l.google.com.+
    +gmail.com mail is handled by 40 alt4.gmail-smtp-in.l.google.com.+
    +$ host 74.125.127.83+
    +83.127.125.74.in-addr.arpa domain name pointer pz-in-f83.1e100.net.+
    +In this case, the result is "1e100.net" (ignoring subdomains), which is different than the domain we started with. Therefore, add both "gmail.com" and "1e100.net" to the white list.+
    +Repeat these steps for each secure site that needs to be accessed in Parental Controls.+
    ======================================

  • Unable to send just one e-mail when more are defined.

    Hello,
    Version of the database you are using: 10
    Version of Application Express: 4.0.2.00.07
    Problem Process: Send E-Mail
    I have a form that has data entered onto it 3 different time by 2 different people with an e-mail that needs to be sent after each entry.
    User comes in and request to have work done. Clicks button to send e-mail so that the appropriate person can see the request.
    Appropriate person goes in and gives it an estimate so that the person requesting will no how much it costs. Sends e-mail back.
    User goes in looks at data and approves. Send e-mail so that work can be done.
    Problem: Send e-mail click sends all emails.
    How do I set this up so that it is only sending the e-mail that the button click asked for. These are three different buttons referencing 3 different processes.
    Any help is greatly appreciated. If more information is needed please ask and I will try to supply a piece that is missing.
    Chuck

    Hi Chuck,
    the best way to find out what's going on is to enable debug mode for your application and run your page in debug mode. Click on one of the buttons and check in the debug output what actually happens. But you can also upload your application into a workspace on apex.oracle.com so that I can have a look.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Unable to set "Fit one full page to window" as scrolling default for every PDF

    I am trying to retain "Fit one full page to window" as default for every PDF so that when I open a document and scroll down once, it scrolls to the next full page, rather than chunks.  I then need to manually select the option from the menu bar, after which it functions properly. When I change the Default Layout and Zoom to "Fit Page", it merely changes the zoom factor; it doesn't enable the scrolling setting.  Is this no longer an option with Acrobat X? I recall being able to do so with previous versions.
    I've even tried doing this manually for each PDF by going to File>Properties and setting the initial view similarly.  This didn't work, though even if it did it would be too impractical based on how many PDFs I read on a given day.

    I've been hoping for an answer to this for awhile.  There's really annoying, since one would logically think "Default Layout and Zoom" under the page display contains that setting.  Yes, it will affect the zoom, but it has no effect on whether or not the "Fit one full page to window" option is actually selected.
    Every time I open a PDF, I have to click that icon, which gets super frustrating since I work with dozens of user manuals every day looking for spare parts, etc.
    I really hope someone can answer this.

  • I am unable to activate my one to one code

    I was in the Apple store and tried to activate my one to one classes but could not remember my password then.  Apple called me this morning and unfortunately I missed the call.  Now I have my password and tried to follow instructions to activate and no option to input the code came up at all.
    I need assistance,  I can be reached by email here.
    thank you
    Donna Stanton
    <Personal Information Edited By Host>

    Well I guess we are casualties of several million people trying to do the same thing at the same time. I bet if we wait a while (like a day or so) things should get more normal. After all this roll out is projecting to be the biggest one of all. We can be lucky that we even got our phones. My buddy order an hour after me and he is not even for a email saying it shipped. He's bummed big time. I am going to bed and I'll try in the morning.
    good luck
    RIP Steve this ones 4U

  • Jsf Bean target unable to reach in one of managed servers

    Hi All,
    We are using portal 10.3.0 and jsf 1.2
    Application working gud on both managed servers but suddenly,
    In one of managed servers getting "javax.el.PropertyNotFoundException: Target Unreachable" and resolved my bean to null
    Any idea ....Please do help me...
    Thanks in advance
    Siddu

    what is your domain structure ? You deploy your application to stand alone managed server or cluster ?

  • Unable to navigate from one screen.

    Hi All,
    I am new to this customization in Oracle Identity Manager Self service control.
    I have to create a new tab in OIM Self service console from which it should navigate to a popup screen.
    I gone through some code as given below. Due to this I am able to go see the file name in url but the screen is blank without any data on screen.
    adf-config.xml:
    <?xml version="1.0" encoding="UTF-8" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="test1">
    <page>/examples/Test1.jspx</page>
    </view>
    <view id="test2">
    <page>/examples/Test2.jspx</page>
    </view>
    <control-flow-rule id="__1">
    <from-activity-id id="__2">test1</from-activity-id>
    <control-flow-case id="__3">
    <from-outcome id="__5">-navigation</from-outcome>
    <to-activity-id id="__4">test2</to-activity-id>
    </control-flow-case>
    </control-flow-rule>
    </adfc-config>
    faces-config.xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <faces-config version="1.2" xmlns="http://java.sun.com/xml/ns/javaee">
    <application>
    <default-render-kit-id>oracle.adf.rich</default-render-kit-id>
    </application>
    <navigation-rule>
    <navigation-case>
    <from-outcome>-navigation</from-outcome>
    <to-view-id>/examples/Test2.jspx</to-view-id>
    </navigation-case>
    </navigation-rule>
    </faces-config>
    Can any one know how to solve this issue.
    Any suggestion can be helpful to me.
    Thank you
    -SRITHEGREAT

    Can't anyone help me, "how to create a popup window using xml menu model".
    Even a small suggestion on this issue can be helpful for me.
    -SRITHEGREAT

Maybe you are looking for