Unable to have Spotify cache files to SD card on Moto G 2

hi everyone, even following the instructions, deleting cache than having loads more free space on my SD card I'm unable to have Spotify cache files on it.
I use a Moto G 2.
Anybody can help?

I have the same issue, even following all the steps, making a clean install, making sure there were no spotify files remaining it still saves everything in the internal memory.https://community.spotify.com/t5/Help-Android/Spotify-wont-sync-to-SD-card-usual-solution-doesnt-work/m-p/1154084

Similar Messages

User sip folder have many .cache files with 4kb and the folder is becoming full and Lync Client stops working

User sip folder have manu Mailitem&username&.cache files until folder is full and Lync client stops working.

Hi,
You can try to change the Lync Profile name. After you do it, Lync will create a new Profile. The Lync Profile path is following:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
If the issue persists, please repair Office 2013 and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

When group-working from SAN, where is the best place to store Cache Files, the Cache Database, and render files?

I have a small post production house, and we are spinning up into editing our first series. We're all working from a SAN, and sharing projects and sequences via the Media Browser. It's working great so far, but we've been having issues (could be user error) with trying to figure out where best to store the Media Cache database, the cache files, and the preview files so when a project is moved from one machine to another, it doesn't constantly have to re-conform all of the media in the project.
We have a very large master project, as this is a documentary style show, so there are hours and hours of clips.
When I open a project on a new or different machine it has to conform EVERYTHING in the project again.
Where should I store all these conform and cache files so that new people can get started working without having a machine literally be unusable until the conform process finishes?
Thanks!

Hi Jon,
I have a small post production house, and we are spinning up into editing our first series. We're all working from a SAN, and sharing projects and sequences via the Media Browser.
Glad it is working for you. Just to let you know, this workflow is not officially supported so your mileage may vary based on the kind of system you're working with. There are a lot of variations to the quality of these kinds of systems. Some are turn key, some home built - so I think you understand.
It's working great so far, but we've been having issues (could be user error) with trying to figure out where best to store the Media Cache database, the cache files, and the preview files so when a project is moved from one machine to another, it doesn't constantly have to re-conform all of the media in the project.
While it's possible to have the cache files (and the database) in a central location (I only know of one place that pulls that off, and it's a very, very large place), the systems that have this data stored locally are far more reliable. You can work around all the reconfirming by avoiding moving the project data around. You really don't need to move the project around from place to place. Have one computer as the "hub" for inputting data from other workstations. Wouldn't that work?
When I open a project on a new or different machine it has to conform EVERYTHING in the project again.
Can't you just have the master project on one machine and work on shorter sequences of your doc on the other machines? When done, just import to the master machine.
Where should I store all these conform and cache files so that new people can get started working without having a machine literally be unusable until the conform process finishes?
Premiere Pro simply must have those cache files in order to work. Sorry, there's no way around this problem unless you change your workflow.
Thanks,
Kevin

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a s

When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Getting "Unable to write cache file" message in DW CS4

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
-Steve

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
First of all, only delete cache files when DW is shutdown.
Also, there are a few different caches. That article only addresses 1 of them. Take a look at this TechNote to be able to find the Site .dws cache files:
http://kb2.adobe.com/cps/598/5989f7f4.html
HTH,
Randy

Caching files that have no extension

Hello,
I am new to the group. I am testing the 4.0 proxy server to see if it will cache files using my companies software. The software is for Patch Management and is agent based. The agent usses HTTP GET commands to download packages to the client side and the install them. The ability to diredct the agent to a proxy and cache downloads has been tested and verified with products like SQUID and WinProxy. The problem I am having with the sun proxy server is it will not cahe the packages the agent request. I see the request in the log and the package dows get to the client machine. These packages have no file extension. i have even setup my browser to use the proxy server and download the packge that way. Again I see the log file entry for the package but i am unable to find it in the cache diretory. I see other files like GIf and JPG being cached but no files i request that do not have an extension are getting cached.
Thanks for any insight on this.
Glen whittenberg
PatchLink
[email protected]

This should not happen as Proxy would cache all the files. Please raise a bug with a valid test case for us to look into this issue.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

HELP! Lost ALL my bookmarks & Bookmark Toolbar is empty. Attempts to restore from the backup files yields an error message that says, "Unable to process the backup file." Have tried opening nearly all 10 existing backups w/same result.

I was in the midst of a Firefox session w/two windows open. Nothing special about the sites. No fancy javascripts or anything. When I closed the second window and opened the "History, Show all History" pull-down, the Library screen had no data in it.
I looked for the Bookmarks.html file in my profile and it is missing. I tried renaming an old .bak file from a couple years ago and I can open it as a file and see the text of it displayed but Firefox will not recognize it as and open it as the Backups file.
Following the directions already posted - using "History, Show all History" then the "Import and Backup, Restore" process - allows Firefox to see all the backups, but trying to restore from any of them yields the "Unable to process the backup file" error message.
I have re-started my machine from a cold start - twice now.

The file that stores bookmarks is probably damaged, for details on how to fix that see http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

Backup drive?
Subscribe to iTunes Match?
If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck. A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work. You can buy a lot of CDs for $200.

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

The D610 needs ACR 8.3 so you are easily covered there. I am not entirely clear on the process you are using the bring the files onto your hard drive. The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

Elements 7 on windows 7, have downloaded a new version on raw for my new camera eos50d still unable to read the raw files help

Hi
Hope someone can help me with this one, have a new computer with windows 7 as the operating system, have installed elements 7 and have now purchased the 50d, as i shoot in raw have tried to open the file but elements is unable to read the raw file, have looked on various threads and have downloaded the new version of raw, this version is saved in my download file directory, have copied across these files to the elements folder but i still cannot read my raw file for the 50d, is there something i have missed.
collisa

please have a look at the folllowing link about the isntallation of the camera raw plugin.
http://kb2.adobe.com/cps/407/kb407344.html
be sure not to have the older version of camera raw plugin in the same folder as that of new one. dont even rename it. Remove it and store it in some other location in case you need to revert back the changes. The camera raw plugin is called : Camera Raw
thanks

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to corr

I have master suite cs6. on mac osx. bridge has been quitting unexpectedly. Also, getting message at start up that states that "bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I have purged the cache several times and adjusted settings with no change. I also downloaded the entire suite and installed. Do I need to uninstall all of the programs before installing the suite? There is not an option to install only Bridge from the install package.

Maria,
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Since upgrading to FF 4, I have constant crashes (updating graphics drivers did not help). now all my bookmarks are gone. When I try to restore them, I get error message: "Unable to process the backup file".

Since I "upgraded" to FF 4, I have constant crashes (I tried updating my graphics drivers--it did not help) and now all of my bookmarks have disappeared. When I try to restore them, I get this error message "Unable to process the backup file". I have lost years of bookmarks...please help.
I am using Windows XP, SP 3 if that matters.

I am also unable to restore any of the backups of the bookmarks, both automatic backups and two backups that I created manually. Since I was able to restore backups before, and since no changes have occurred to these backup files, the problem must be with Firefox.
Right before my bookmarks disappeared, FF crashed and I accidentally started FF 3.5. When I saw what I did, I ended the Firefox process and started FF 4. That's when all my bookmarks were gone and I discovered I couldn't retrieve any backups. I did note that an add-on was updated when I restarted FF. Maybe that's the problem. Does FF have a Safe mode?

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before down

Since I downloaded Adobe Reader 11.0.07 I have been totally unable to print any PDF files using my Dell 1720 laser printer - I just get a blinking "error" light on the printer, no other error messages . I never had a problem printing PDF files before downloading the new Reader version. Suggestions? Thank you.

Hi,
Which version of Adobe Reader were you using earlier when printing using Dell printed was working fine?
Thanks,
Shakti K

Unable to have Spotify cache files to SD card on Moto G 2

Similar Messages

Maybe you are looking for