Unable to hear Cortana's voice using Hyper-V VM

I have made sure that the allow remote audio playback option is selected in my RDP connection I have also confirmed that the placyback device on the Windows 10 machine is set correctly.  I am able to hear system sounds, audio from the test option,
and audio from internet sources however I cannot hear any audio from Cortana.

Hi Finalist,
It is not available for me to do the test here.
For the current situation, you may submit this through Windows Feedback.
If I have any helpful information found, I will post back.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

  • Unable to hear caller's voice in my iPhone 4.

    I am unable to hear caller's voice unless my iPhone is in the speaker mode or connected to headset. I have done resets multiple times and also tried restore option from iTunes. Nothing helped. Any ideas to resolve this?

    Hi there Kamesh_Swami!
    I have an article here that can address that issue and provide some troubleshooting steps for you:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • HT4972 why am unable to hear phone conversations or use the mic with the earbuds

    I have done the "cleaning out the lint", still can't hear anyone on the phone but can hear music with the earbuds

    As long as you are paired with your bluetooth in your car, your sound will only come out of the speaker or the bluetooth device. Try to disconnect the bluetooth.
    Use the speakerphone or a Bluetooth device
    Tap Speaker. The Button is labeled Audio Source when a Bluetooth device is available, which lets you select the Bluetooth device, iPhone, or Speaker Phone.
    copied from page 63 iPhone_User_Guide

  • TS4185 i have a macbook pro and when using FaceTime people are unable to hear me, even though i can hear them

    I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.

    I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.

  • TS3367 My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

    My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

    Had the same problem, the only fault and the reason why it happend is a bad wifi connection!
    Could ofc be something else, but thats my two cents!

  • Unable to hear voices when on the phone, unless on speaker

    just had my iphone yesterday and when making or receiving calls, unable to hear any voices unless put it on speaker.
    it this a norm of the phone? had tried on all avenues on the phone to rectify, but unable to find any solution.
    anyone have any knowledge or ways to make it sound again?
    thanks.

    Try the suggestions mentioned in this article: http://support.apple.com/kb/TS1630
    More general troubleshooting for hardware here: http://support.apple.com/kb/TS2802

  • Unable to hear Voice in Video Conferencing.

    One of my user has organized the Video Conferencing, where his voice is heard at the other end.  But the Presenter is unable to hear the voice.
    Have checked the Policies have no issues.  What could be the next step to check and share your thoughts.
    Thanks,
    D

    Can the presenter hear any audio at all? 
    Can you confirm the locations of each user involved in terms of inside the network or connecting via edge?
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Unable to use Hyper Draw on some projects

    I might be doing something wrong, but all of a sudden in one of the current projects I'm working on I can't use Hyper Draw in the Piano roll view. I can't see any current automation or draw any new modulation, sustain, volume etc. I have had to revert to using track automation, which works OK.
    If I start up a new project I can use Hyper Draw in the Piano roll and it appears to work on other completed projects. Have I changed a setting or parameter in the project that it won't work in, or is it a known bug?

    Bump. Anyone?

  • People unable to hear me during calls, 3GS

    When I make/recieve calls, people keep on telling me that they are unable to hear me with repeatedly. Saying things such as my voice is cracking up or stops working all together even though I can hear them clearly also the use of voice controlls etc is fine and it works. Even with headphones people still are unable to hear me talking and I am out of warrenty.
    Would anyone be able to help me with this problem?
    Thanks.

    Hi, Laura. 
    There are some troubleshooting steps that we can process prior to opting for a repair.  If you do have a protective film on your device make sure that is removed and test to see if the behavior persists.  Below, I have attached an article that goes over some basic troubleshooting steps.  After all steps are processed and the issue persists, we can service your unit at your local Apple Retail Store.  You can schedule an appointment buy clicking this link http://www.apple.com/retail/.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    Jason H. 

  • Unable to hear from ear piece

    Hi,
     I am using Curve 8520. All of sudden I am unable to hear voice from ear piece. When I check my display screen ear piece icon flashes with headset symbol. This continuously happening till I disconnect the call. I have used my headset & I am able to hear loud & clear. I wish I could get some experts assistance on fixing the issue.
    Thanks
    Surya

    Hello!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No audio hear by 3rd party using carrier after upgrade ios5.1.1

    after i used iCloud upgrade the iOS5.1.1 and I found my iPhone4 got issues on carrier whereby 3rd party unable to hear me at all although I have done all the below before I restore my backup data.
    Reset all data and all setting
    manually restore iOS5.1.1
    reset all network setting
    I also tried to change my sim card from telco company and even we tested to place my sim card on other iPhone4 and proven it is working. Vice versa, we tested to use my friend's sim card on my iPhone and same issues occurred whereby 3rd party can't hear my voice but I can clearly hear them.
    Lastly, I've tested the app of skype and viber to make video call or call, it is working fine but it is not working when I use the carrier call (GSM) to 3rd party.
    I suspect it is iOS5.1.1 issues rather than hardware issues because tested the mice of my iPhone is working perfectly by using the talking toy app.
    Pls. advise who can help me?

    uncheck the "Wait for Far End" option. Also, check and see what codec is coming across on the local AND Remote phone (if possible...I know the remote is a station on the key system, so I don't exactly know how to check that unit...) and see if it is actually coming across as a G711 and NOT a G729, which needs a transcoder, as you know...
    I ran into this problem and did some manipulation with IOS transcoders through the call legs to get it to process correctly.

  • People are unable to hear me when calling only works on speaker iPhone 4s AT

    I once made a called and my friend said that he was unable to hear me so I tested my iPhone by using voice memos and it couldnt find my voice, it only works on speaker.

    Bring your phone in for evaluation

  • I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

    i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

    Hello dbrookes,
    Thank you for using Apple Support Communities!
    It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
    I wanted to recommend a couple of things.
    First, I would reset the phone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
    Just incase you need it, this article will help with that:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Sterling

  • Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

    Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..

    It would be nice if you told others the steps you've tried and/or how you used to have your setup.
    Anyway have you tried tapping MORE this will then bring you to
    the selection-list of Audiobooks, Genres, Compilations & Composers.
    Selecting Genres gives you a list of all your music split into genres which was set within the Music downloaded via iTunes or uploaded from CD or which you may have set yourself.
    Then you just select the Genre you want:
    If certent songs are not correctly gategorised you may need to go into iTunes and reselect via Get-info
    >Info>Genre and change it there. That way you should end up with all songs of Jazz or other in 1 place.

  • V490 is not loging using hyper terminal after modifying hosts file

    Dear ALL,
    I am new user of Solaris 10. My Director has given me task to configure Sun fire V490 server. Today I was configuring the Network of the server using vi editor , I had change the ip from /etc/inet/hosts file after modifying the file I had restarted the system but it was not loging into root user. it gives an error "unable to login" , I searched the problem and find out that I missd the netmask file to modify but now I am unable to loging through hyper terminal . I am configuring the server using hyper terminal , is there other way to configure the server , because there is no vga card for the monitor display. How can I modify my server files. Please help me in this regard . I shall remain thankful to you.

    With Lions should be fine editing the standard /etc/hosts file
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1           localhost
    add here your IPv4 hosts list
    255.255.255.255     broadcasthost
    ::1                 localhost
    fe80::1%lo0         localhost

Maybe you are looking for