Unable to Hear from iphone 4 speaker

The speaker of my iphone 4 is not working. i could not be able to hear any sound except the call ringing. i do not hear the sms notifications, whatsapp, or any other application notification even the keyboard typing sound. but i hear everything when i blug the earphone.although when i want to raise or low the sound from sound bottoms the sound volume indecator does not appeared at all.
Any help????

Hello there, Aboud.Rifai.
The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Learn more about troubleshooting iPhone hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Unable to hear from ear piece

    Hi,
     I am using Curve 8520. All of sudden I am unable to hear voice from ear piece. When I check my display screen ear piece icon flashes with headset symbol. This continuously happening till I disconnect the call. I have used my headset & I am able to hear loud & clear. I wish I could get some experts assistance on fixing the issue.
    Thanks
    Surya

    Hello!
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • User unable to hear from diferent WLC registered AP

    Hi,
    We have 2 WLC 4404 and 4402 .Currently around 115 Nos 1242 series AP is registered in both WLC .100 AP is in 4404 and rest in 4402 .Software Version 7.0.251.2 Emergency Image Version   5.2.157.0..We have Cisco 7921 ,7940 and 7911 phone.we have started the 4402 WLC recently with 15 Nos AP.Now we are facing the below mentioned problem
    We are unable to hear the sound in call when one wireless phone registed with  AP of  WLC 4404 and one wireless phone registed with AP of WLC  4402. 
    But at the same time when weireless pone user call to any wire phone user it's working fine.Both user are able to   hear.
    Plase help me to resolve the issue.
    Regards
    Debabrata

    Debabrata try the following if virtual ip didn't solve your issue.
    1- Keep the Authentication/encryption open
    2- Test making call using wireless clients on same WLC 4404 but on different AP
    3-If above work then change the WLC but no WLC 4402 any other for testing purpose and test again

  • Can Hear From Mic through Speaker but cant capture in audacity

    Hi,
    I have the following Sound Card.
    05:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
            Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
            Flags: bus master, medium devsel, latency 64, IRQ 16
            I/O ports at e800 [size=256]
            Capabilities: [c0] Power Management version 2
            Kernel driver in use: C-Media PCI
            Kernel modules: snd-cmipci
    It is detected and I can hear the sound Sound from Mic Through the speaker.
    How ever I am not able to record it in audacity.
    Mic Does not work on Skype too :-(
    Could some one help me trouble shoot this?
    thanks :-)
    --Siju
    Simple mixer control 'Master',0
      Capabilities: pvolume penum
      Playback channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Mono:
      Front Left: Playback 24 [77%]
      Front Right: Playback 24 [77%]
    Simple mixer control '3D Control - Switch',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [on]
    Simple mixer control 'PCM',0
      Capabilities: pvolume pswitch pswitch-joined cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 28 [90%] [on] Capture [off]
      Front Right: Playback 28 [90%] [on] Capture [off]
    Simple mixer control 'Synth',0
      Capabilities: pvolume pswitch pswitch-joined cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 31 [100%] [on] Capture [off]
      Front Right: Playback 31 [100%] [on] Capture [off]
    Simple mixer control 'Line',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 31 [100%] [on] Capture [off]
      Front Right: Playback 31 [100%] [on] Capture [off]
    Simple mixer control 'Line-In Mode',0
      Capabilities: enum
      Items: 'Line-In' 'Rear Output'
      Item0: 'Rear Output'
    Simple mixer control 'CD',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 31
      Front Left: Playback 25 [81%] [on] Capture [off]
      Front Right: Playback 25 [81%] [on] Capture [off]
    Simple mixer control 'Mic',0
      Capabilities: pvolume pvolume-joined cvolume cvolume-joined pswitch pswitch-joined cswitch cswitch-joined penum
      Playback channels: Mono
      Capture channels: Mono
      Limits: Playback 0 - 31 Capture 0 - 7
      Mono: Playback 25 [81%] [on] Capture 6 [86%] [off]
    Simple mixer control 'Mic Boost',0
      Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum
      Playback channels: Mono
      Capture channels: Mono
      Mono: Playback [on] Capture [off]
    Simple mixer control 'Phone',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
      Playback channels: Mono
      Limits: Playback 0 - 7
      Mono: Playback 5 [71%] [on]
    Simple mixer control 'IEC958 5V',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Copyright',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Monitor',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Phase Inverse',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Select',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 In Valid',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Loop',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Mix Analog',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'IEC958 Output',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'Beep',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
      Playback channels: Mono
      Limits: Playback 0 - 3
      Mono: Playback 2 [67%] [off]
    Simple mixer control 'Aux',0
      Capabilities: pvolume pswitch cswitch penum
      Playback channels: Front Left - Front Right
      Capture channels: Front Left - Front Right
      Limits: Playback 0 - 15
      Front Left: Playback 12 [80%] [off] Capture [off]
      Front Right: Playback 12 [80%] [off] Capture [off]
    Simple mixer control 'Exchange DAC',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]
    Simple mixer control 'Four Channel Mode',0
      Capabilities: pswitch pswitch-joined penum
      Playback channels: Mono
      Mono: Playback [off]

    I had similar problems and could get nothing whatsoever when trying to record from the microphone or using it in Skype (it was obviously muted completely in some way). Tried everything I could in alsamixer, and installing PulseAudio didn't manage to get it working either.
    However I installed gnome-alsamixer, and ticked a few 'Rec.' check boxes and everything works now as it should! Sorry I can't pin down exactly what switched it on.

  • No ringing sound,no music sound coming out from IPhone 4 speaker ( just got it a week ago). Help please.

    No sound from the speaker coming out.

    Is the silent switch on the side of the iphone on?
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • TS1630 i cant hear music unless i have earphones in.  when i unplug them i cant hear from iphone 4 speakers

    it seems as if my iphone is detecting earphones when they are not plugged in.  I could only hear music with earphones due to this problem.

    You probably have debris in the earphone jack blocking the sensor.  Try blowing hard on it, and quickly inserting/removing your earphone multiple times to dislodge it.

  • I am unable to hear anything on my iphone unless I have it on speaker.

    I am unable to hear my iphone at all unless I have the speaker on.  Has anyone experienced this before?  How did you resolve it?

    Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    If it does, there might be something in the headphone jack, maybe lint, dirt, or something else in there.
    You can try getting it out by connecting the headphones 5-10x or spraying compressed air into the jack.
    If it doesn't say headphones or there isn't anything in there, try restarting or restoring the iPhone.

  • After updating to version 5 for iPhone 4, I am unable to hear incoming call from earpiece. Speaker phone ok.

    Unable to hear incoming call in earpiece. Speaker phone ok.

    ok thanks for someone "Wjolsten" pointing out that i might have put on the 'ringer silence' button on on the side of the phone. ......................... boy do i feel stupid. thanks all the same for the 'tech support' from Apple, Geniuses?? i dont think so.

  • TS3406 I am unable to hear caller on my Iphone 6 unless it is on speaker. any ideas on correcting the issue

    When making a call I cannot hear the other party unless I have my speaker on. Any idea on how to get phone to work without using the speaker to take private calls.

    Hello sirwin1999,
    For issues of not being able to hear from the receiver on your iPhone 6, then check out the article below. It will have you check the connections making sure that Bluetooth is not on as well as clearing out anything near the receiver itself. 
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G. 

  • I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

    I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
    I think that my ear piece and mike have both got magnetised how do fix the problem
    Please help

    I have the same problem!! It lead to many other problems with my phone
    I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

  • I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

    The little lock has nothing to do with speaker volume.  It means you have locked the rotation on your iPhone.
    Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?

  • My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

    1357b wrote:
    My iphone 5 ATT, i can hear the recording
    What recording?
    but can not hear anything from neither ear speaker or loud speaker when i call?
    You just wrote you could hear the recording...
    You can take it into an Apple store and have it checked out.

  • People are unable to hear me when calling only works on speaker iPhone 4s AT

    I once made a called and my friend said that he was unable to hear me so I tested my iPhone by using voice memos and it couldnt find my voice, it only works on speaker.

    Bring your phone in for evaluation

  • Unable to hear caller's voice in my iPhone 4.

    I am unable to hear caller's voice unless my iPhone is in the speaker mode or connected to headset. I have done resets multiple times and also tried restore option from iTunes. Nothing helped. Any ideas to resolve this?

    Hi there Kamesh_Swami!
    I have an article here that can address that issue and provide some troubleshooting steps for you:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

    i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

    Hello dbrookes,
    Thank you for using Apple Support Communities!
    It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
    I wanted to recommend a couple of things.
    First, I would reset the phone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
              http://support.apple.com/kb/ht1430
    If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
    Just incase you need it, this article will help with that:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Sterling

Maybe you are looking for

  • Hardware Rules don't work - failed to return a task

    I am trying to make some post-imaging changes and though I'd give the Hardware Rules a go ( which I haven't used for a long, long time .. not in ZCM at least ). I am not getting an error similar to : http://forums.novell.com/novell/nove...rror-91-a.h

  • Invoice List setup question

    Payer 989899 needs to be set up on an invoice list, vs multiple invoices they currently receive. And We need this capabillity for a group of customers as well. Can somebody tell me whats the procedure to setup on invoice list. Thank you Radha

  • Hide your JS code? Now it's possible...

    If anyone's is interested in being able to have a binary, practically non-reversible version of their JS scripts for PS versions CS to CS3 (Windows only at the moment; Earlier versions will probably work as well, but are not tested yet), I've develop

  • How can I record a Synth lead to sound exactly how I played it?

    For some reason when I record with the "Analog lead", it doesn't record exactly how I played it.

  • Looking for experience of QuickTime API for Windows

    Hello, I have an application which calls the QuickTime JAVA API provided by Apple. Every time I'm trying to update to a new QuickTime version (for example to QT 7.6.1), I got compatibility problems. It seems the API have not been changed since 2003.