Unable to HotSync with Windows 7 (64bit)

I wonder if anyone has had any success of using hotsync with a Palm Z22 (handheld). I do not have bluetooth on this laptop, only wireless. The error message is that I am missing a hotsync driver. I called Palm and was told that Windows 7 does not support hotsync. Any suggestions? Thanks.
Alice [email protected]

Folks, did you read the post about getting a "Bluetooth Dongle"? Walmart.com has them for as little as $15 US. This easily adds BlueTooth capability to any computer via a tiny device that attaches to a USB port.
Palm is not going backwards - it has discontinued PalmOS devices quite some time ago, and has moved forwards to webOS!
Workarounds have been offered here in this forum. You can choose to follow them or not, your choice.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Hotsync with Windows XP without using Outlook?

Can I Hotsync with Windows XP and use a program other than Outlook. I am using my old M100, thanks.
Post relates to: Palm m100

Hi,
I am brand new to this...bought an m100 at a garage sale...trying to use it on my windows xp...so I bought a trendnet usb to serial converter and set it up...i try to hotsync and it says "the connection between your handheld computer and the desktop could not be established. Please check your setup and try again". At one point, COM4 was the port that was being used on local, but now it's saying that COM1 isn't available. I don't know what i'm doing. I just want to put some text into this device that i currently have stored in WORD on my PC. Can someone help me in very simple terms? I don't understand any of this lingo.

Hotsync with windows XP Home

My Tungsten E2 has stopped hotsyncing with my windows XP computer. It worked fine for several months and now I get the message "The connection between you device and the desktop could not be established. Pelease check your setup and try again." I have two hotsync cables and have tried both. I have tried a soft reset and that did not solve the problem. I have also tried two different computers and it doesn't work with either, though it used to.
Post relates to: Tungsten E2

A good place to start would be the hotsync troubleshooter guide you can find it here http://kb.palm.com solution id 2630
Post relates to: Centro (Sprint)

Director MX 2004 compatibility with Windows 64Bit

Hello
I'm buying a new desktop system and I was asked in the shop
if I wanted windows xp with 32bit or 64bit. Yes, I opted for xp
instead of Vista.
I'm just wondering if Director MX 2004 is fully compatible
with the 64bit version? Or, are there any issues I should be wary
about.
The guy in the shop recommended the 64bit since the RAM could
be upgraded more.
Any feedback appreciated. Sorry if this is not LINGO related.
Andy

HTML is HTML. The product you use doesn't matter much except in terms of "ease of use" and quality of code it generates. MX is a dinosaur. Depending on how you built your sites with it, you may need to update your code to modern web standards. But your site's code will remain editable in any version of DW.
That said, a LOT has changed in 10 years. So if you don't have really strong coding skills in HTML and CSS, you will struggle with newer versions of DW. The interface is different, too, so it will take some adjustment.
CS6 is the only version you can still purchase.
Creative Suite 6
All the rest are available only through subscription to the Creative Cloud.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

Palmone m500 - does it hotsync with Windows 7?

I am considering buying a Palmone m500, but am not sure that it hot-syncs with Windows 7, as I believe it is a discontinued product.
Not much use in buying one if I have to type everything in by hand on the Palm screen, I want to be able to do the majority of the data-entry on my Windows 7 based PC, and then sync it onto the Palm..
I believe I am using the "home premium" addition of Windows 7 BTW..
Thanks for any advice on this..
Post relates to: Palm m500

Hello!
If the PC is using 32bit version of Windows & then it should be fine if you sync to Outlook. If the PC is using a 64bit version of Windows 7 then it will not be compatible unless you get a PalmOS PDA with bluetooth like the Palm TX.

Palm m500 Hotsync with Windows 7 Home Basic - 32 bit

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
I tried hot-syncing by installing Palm Desktop 4.1.4. and Palm 6.2. Have both on my PC. It did do a hot-sync but only to back-up data. I need to view the data on my PC/Monitor.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step simple instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........
Myra

You can give this a try if you havent done it yet...
How to import the Address Book from Palm Desktop to Outlook
You may need to install this too if it is Outlook 2007
Outlook 2007 Update (Windows installer) for Palm OS
For other outlook versions download from this link:
Downloads
There is another post that said you may be able to transfer it using the Infrared feature in the device.
Check POST
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Palm Z22 hotsync with windows 7 64 bit-using IRD

I have been trying to hotsync my input from Palm Z22 into my new OS Windows 7 64 bit using first the USB-unsuccessful.
I purchased an IRD to try and hotsync onto OS windows 7 64 bit- but also have failed. Any advise?

I do not know if it will work. In his post at brighthand that he made the Aceeca driver available to the palm community Alex stated that it should work with many Palm devices that were os 4 or 5. You are using an older version of the palm desktop and one of the older os 4 devices. I do know of people with the palm m505 and m515 using the Aceeca driver with success, but they were using a newer version of the palm desktop. I believe most were using the 4.1.4 palm desktop version. I do not know if experimenting with a newer desktop version will help either.

Z22 hotsync with windows xp

I purchased a Z22 to replace an M125. Have been using palm handhelds for nearly 10 years. Datebook data did not sync. Contacts ok. Called palm support phone#. Waited for 30min then got person I could not communicate with. Hung up. Called Staples where I bought bought Z22. I can come back to the store and for $40 they will fix problem for a product that cost me $90. What's wrong with this picture? If I had read the hotsync problem messages on this board first, I wouldn't have bought another palm. Is palm serious about remaining in this business?
Any suggestions on datebook hotsync issue?
Post relates to: Palm Z22

Hello philppl and welcome to the Palm forums.
The Z22 does not use the Date Book application. Disable the Date Book conduit and you should be fine. By the way, you did follow the upgrade directions found here, right?
Alan G
Post relates to: Treo 755p (Sprint)

Unable to connect with Windows 7 laptop on home wireless network

When I initially set up my network, both computers were able to see each other. I could access the Mac's files on the Windows 7 PC, but not vice versa. The Mac required a user name and password when I clicked on the PC's icon in Finder, but wouldn't recognize anything I'd type in.
I tried duplicating the Mac network location and entering "WORKGROUP" under the WINS tab. This caused the Mac to lose sight of the PC altogether, and still can't see it when I switched back to the original location. The PC can still see the Mac.

I'm not sure if this help. I have a Macbook Pro with Magic Mouse in Window 7.
What I did was when you click on the Bluetooth >> Add a Device, the Magic Mouse will show in the pop up window.
Do not click "Next", instead right click on the Mouse and select "Properties".
Under "Services" tab, checked "Drivers for keyboard, mice etc (HID). Then click "Apply". Driver will be installed once is done click "OK"
Then click "Cancel" on the Add a device windows. The magic mouse should be connected now and shown in the Bluetooth Device list.
Hope this help, at least it does works for me. Cheers

Unable to install with Windows 7 and IE9 x64bit,

I got a new PC to day , and I want to download Itunes.
When I download it looks ok, but when the computer is trying to install I got this warning message:
"Can not open this installasionpakkage,Control that the package excists and the axcess to it, otherwise contact the programdistrubitor to verify that it is an valid windows product"
Does anyone have an Solution ?

Try this link, it is for the 64bit windows version of itunes.
http://support.apple.com/kb/DL1427

Palm Tungsten E2 hotsync with windows 8 Software download loctation

Were can I download software for my computer for my Tungsten E2

Hello, and Welcome to the HP Support Community! Have you read the first post at the top of the list? WyreNut

Treo 700p won't HotSync with XP Pro

My Palm Treo 700p will no longer HotSync with Windows. I have tried different cables, different operating systems, different computers. I get the same message every time, which is "Unable to initiate HotSync operation because the port is in use by another application". Any ideas how to solve this?
Post relates to: Treo 700p (Verizon)

Thanks for the suggestions, after perusing the FAQ section I tried the soft reboot (disconnecting the battery and re-connecting) and that fixed both the HotSYnc problem and the Bluetooth problem, so I'm good. Thanks again!

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

ITunes & Apple Mobile Device Driver Not Compatible w/ Windows 64bit Systems

In short, I spent over 2 hours on the phone tonight with Apple Support. The call was elevated to a software engineer. After several minutes he apologigized and state the Apple Mobile Device Driver is not compatible with Windows 64Bit systems.
Therefore I can't activate or do anything for that matter. I effectivly have a $600 paper weight. I asked the engineer if they have any intention fixing it and never received a direct response.
None of the documentation that I have found states 64bit Operating Systems are not supported. The support rep stated nor he or his collegues were unware the mobile device driver didn't support 64 bit OSs either. I consider this to be really misleading and a huge oversight on Apple's part.
I wrapped up the call by asking him how I go about returning the device without being struck by the 10% restocking fee. He didn't know.
Anyone have Steve's number? I sure would be nice to get at the minimum a full refund.
I just thought everyone else should know so you don't tie up support lines and waste your time trying to find a resolution.
Regards,
KSPad

OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista

I am unable to download Adobe Flash Player with Windows 7 64Bit

Hello there I am unable to download Adobe Flash Player with Windows 7 64Bit I get and error messagePlease Help

Hi Pickypattie
What is the error message you're getting ?

Unable to HotSync with Windows 7 (64bit)

Similar Messages

Maybe you are looking for