Unable to import DWG CAD files to WCS

Hi all,
I am trying to import a DWG CAD file to my WCS 4.2.62.0 for a floor area. Everything I read says I can import DWG CAD files (as well as gif, jpeg, and png) for Floor Areas but I am unable to do so. I get the following error message:
The image file is invalid. GIF, JPEG, and PNG files are acceptable image types for campuses and outdoor areas. DXF and DWG CAD files are acceptable in addition to GIF, JPEG, and PNG for Floor Areas.
Any ideas on why I am unable to import a DWG file as a floor area?
Thanks in advance.

Hi MH, thanks for your response. Here are some links to the literature I was referring to.
This is the WCS Configuration Guide, release 4.2:
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00808e525f.html#wp1125793
This is the WCS Release Notes for WCS version 4.2.62.0. It appears that support for AutoCAD files is a new feature in this release:
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCSRN4_2.html#wp44484
I hope those links work ok for you. I'll have to take a look at this Trapeze/Nortel 'RingMaster' (it is a great name).
Thanks,
BA

Similar Messages

  • Renderfarm error: Pre-Flight Error: Unable to import previously rendered file

    I have an error message I am receiving during network rendering on a  renderfarm, and was hoping for some help. The error is this: "Pre-Flight  Error: Unable to import previously rendered file."
    Here is my setup and some details:
    The user makes a comp, and adds it to the render queue set to render as a  quicktime movie file. Then they run a script which precomps everything  and sets it to render as a image sequence with "Skip existing files"  checked. This comp also has a post-render action set to import &  replace usage. After this comp is rendered, it gets pulled back into the  project and the original render item starts rendering the movie file  using the previously rendered image sequence as it's only layer.
    This project gets saved to a server where our render nodes are watching  the folder. All the render nodes pick up the project and proceed to  render the image sequence. Then, after they are done, 1 machine will  pick up the second render item and begin rendering the image sequence  into the final quicktime movie.
    All of this goes smoothly about 90% of the time. However, in some cases  an error shows up in the watch folder html page for the 2nd render item  (the one converting the image sequence to the movie). The error says  "Pre-Flight Error: Unable to import previously rendered file." After the  error occurs, no machines will start rendering the project.
    My first guess is that the render engine on one machine somehow skips  rendering the image sequence comp, and then tries to render the  quicktime movie comp and fails because the image sequence has not yet  been rendered. However, I can't figure out why After Effects would skip  rendering the first comp.
    Does anyone have any idea?
    Thanks for the help, and let me know if you have any more questions about the setup,
    Adam

    Well, you should get used to the fact that it's simply gone... Just looking at your screenshot makes me grind my teeth. From delayed writing of files to fragmentation in user folders to Windows doing obscure things this could be anything, but seriously, saving important files on the desktop? That is simply sloppy data management. There is no other way to say it. Read up on what proper file naming, incremental saving and backups are good for and why keeping work files separate and away from your user home directories is actually a quite simple, yet effective concept to avoid exactly that kind of issue.
    Mylenium

  • Unable to import certain image files in CS5

    I currently am using CS5, and I am unable to import certain image files such as .png and.tga. When I try to import them I get an error message saying something along the lines of file type not supported. Any help?

    Make sure that the images are not CMYK color space.
    Already tried that, thanks
    One thing to take note of is everytime I start AE I get a pop up box saying "You have at least one output module template that refers to a missing plug-in. Please check your Output Module Template". That plug-in would be the TIIFF alpha sequence output. Perhaps  that has something to do with it..

  • HELP! Importing CAD Files to WCS

    Hello guys,
    I would like to know how can i import Autocad files to WCS and see how the force of the signal can act in a especific area of my company.
    Thank you very much.

    Rodrigo,
    Instructions for importing images for floor plans are at the following link, in the WCS config guide:
    http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0maps.html#wp1125936
    Justin

  • I am unable to import my json file for my bookmarks.

    I'm unable to import bookmarks. When I go to Bookmarks, there is no organize option. If I go to File->Import, it just says that No programs that contain bookmarks, history, etc could be found even though its very obvious that it never made an attempt to look. Normally I do this in the Bookmarks->Show all bookmarks option without problems. I'm trying to import a json file.

    I'm no good a searching for things in Bugzilla.
    If it helps you the keyboard shortcuts within the Library List are
    Alt+O Organize
    Alt+V Views
    Alt+I Import and Backup
    anything else was added by an extension and has no keyboard shortcut.
    Would be nice to know if that works even when you can't see the Library's toolbar dropdowns but would see the dropdown once the shortcut is entered and be able to continue.

  • Unable to import Vob vedio file in to my project

    I am unable to import my VOB vedio file in to my Adobe Premier pro cs6.Please help me on this how can i edit .VOB file

    vob files are files from DVD and sometimes they are copyrighted and have meta data in them that makes it hard to use.. cause the manufacturer of that DVD tried to add data to the file so people can't abuse the copyright. Not all vob files have just video in them.. some have other stuff in them ... like menus and weird stuff that is used by the DVD to display chapters and special features and so on.. So basically not all VOB files are equal .. they are not all the same.. so your problem could be any number of problems...
    If you provide more info .. like maybe someone can help out a bit... but it may be hard to help solve the problem even WITH more info... depending where you got the file and what's inside it.  sorry that isnt very helpful right off the bat , but vob files can be weird.  Another problem with some vob files is that not all of them are written really 'correctly'... even though it is a standardized thing some programs that make vob files dont do a very good job of making them... so .. maybe more info from you could help.. but then again.. it might not lead to a happy ending for you...
    but good luck

  • Unable to import large AVI files

    I make flash animations and then turn them into AVI files. When the avi file is bigger than 2gb, I am unable to import it to the timeline. If I then go back in flash and cut it in two and make two avi files, I can import them. I seem to be missing a codec or 2GB is the largest file I can import.
    Any help on the codec question. I downloaded some codec detectors and it mentioned PCM as a codec. Any help would be appreciated.

    You do not seem to be understanding what Neil said and asked
    The TYPE of AVI you are creating out of Flash uses the TYPE of codec that only works to 2Gig... so, of course, your files over that size are corrupt
    Using the DV AVI codec is a different TYPE of codec... which does allow files over 2Gig
    Just because a file ends with .AVI does NOT mean it is the same as any other file which ends in .AVI - one example of this is that divX creates .AVI files, but they are actually a (hacked) version of the MPEG-4 codec and do not work well with Encore
    You need to find out if you are able to create AVI files using a different codec

  • Unable to Import Unicode (csv) file to BlackBerry Bold 9700

    Hi all
    I'm facing some problems with my new BlackBerry Bold 9700. I have Nokia mobile, I exported my contacts using PC-Suite 7. The exported file includes Arabic characters, so the charset used was in Unicode. I've changed the heading for important fields (and removed others) so that they will match with BlackBerry. I imported the file with "BlackBerry Desktop Manager" using "Synchronize" feature. The import was successful, but the charset was  in wrong format (just like viewing html page with different codepage!) it was like garbage!
    Anyhow, I tried to export, as an example, one contact from my BB and I included Arabic text, when I exported the contact list as (csv) I received a "?????"!!! I then imported the same file with "Synchronize" and strangly it did import and accepted the "?????" and displayed the actual Arabic text as a substitution.
    How come BB don't support Unicode?! Is there anyway I can import my contacts from Nokia?
    I appreciate any kind of help, hints or tips, thanks in advance...
    BlackBerry Bold 9700
    v5.0.0.442 (Platform 5.1.0.121)
    Regards
    Hashem

    I guess, the only option that can help in such situation is to use Outlook Express!
    This is how I managed to do it:
    1. Sync between Nokia PC-Suite and Outlook Express
    2. Sync between BB Desktop Manager and Outlook Express
    3. Done
    or
    1. Sync between Nokia PC-Suite and Outlook Express
    2. Export from Outlook Express as an address book (WAP) to use it on other machine
    3. Import to Outlook Express (you can use Address Book from Accessories)
    4. Sync between BB Desktop Manager and Outlook Express
    5. Done
    Regards
    Hashem

  • Unable to import D300 NEF files

    I am trying to import pix from Nikon D300. All shot in RAW format. iphoto 8 opens up and shows me thumbnails but is unable to import any pictures. I am assuming the iPhoto 8 is not updated for new cameras. is that correct? How long will it take for iPhoto to support D300?
    Thanks.

    hope the 10.5.2. solve this
    http://docs.info.apple.com/article.html?artnum=306835

  • I am unable to import a SWF file in Premiere Pro

    Please indicate how to import an SWF file into Premiere Pro. I tried to import as an movie, but it would not work.

    Hello,
    As of Adobe Premiere Pro 7.1, you cannot import FLV files directly into Adobe Premiere Pro. While working with FLV footage, use Adobe Media Encoder to import the FLV files and transcode the FLV files into a supported file type. For example, use the H.264 format.
    After Effects and Adobe Media Encoder still support the import of FLV files.
    FLV file export is still available within Adobe Premiere Pro.
    Peter Garaway
    Adobe
    Premiere Pro

  • ICal unable to import this .vcs file

    I have tried various edits to this vcs file that a site I use generates but have not been able to have iCal successfully import the file. I get the error message when using "import a vCal file": "This calendar file is unreadable. No events have been added to your iCal Calendar." Any idea what I need to change to get iCal to import this vcs file ?
    BEGIN:VCALENDAR
    VERSION:2.0
    CALSCALE:GREGORIAN
    PRODID:-//Summer/Fitness//CalTool v1.0//EN
    METHOD:PUBLISH
    BEGIN:VEVENT
    UID:[email protected]
    DTSTART:20090720T104500Z
    DTEND:20090720T113000Z
    DTSTAMP:20090718T170523Z
    LOCATION:44th St. @ Lexington Ave.
    SUMMARY:Class Cycling
    DESCRIPTION: INSTRUCTOR: Jill M. [LEVEL: All Levels Welcome]
    TRANSP:OPAQUE
    SEQUENCE:0
    END:VEVENT
    BEGIN:VEVENT
    UID:[email protected]
    DTSTART:20090721T111500Z
    DTEND:20090721T114500Z
    DTSTAMP:20090718T170523Z
    LOCATION:44th St. @ Lexington Ave.
    SUMMARY:Race Training
    DESCRIPTION: INSTRUCTOR: Joe Schwartz [LEVEL: All Levels Welcome]
    TRANSP:OPAQUE
    SEQUENCE:1
    END:VEVENT
    BEGIN:VEVENT
    UID:[email protected]
    DTSTART:20090722T104500Z
    DTEND:20090722T113000Z
    DTSTAMP:20090718T170523Z
    LOCATION:43rd St. @ 5th Ave.
    SUMMARY:Class Cycling
    DESCRIPTION: INSTRUCTOR: Jill M. [LEVEL: All Levels Welcome]
    TRANSP:OPAQUE
    SEQUENCE:2
    END:VEVENT
    BEGIN:VEVENT
    UID:[email protected]
    DTSTART:20090723T104500Z
    DTEND:20090723T113000Z
    DTSTAMP:20090718T170523Z
    LOCATION:44th St. @ Lexington Ave.
    SUMMARY:Class Cycling
    DESCRIPTION: INSTRUCTOR: Joe Schwartz [LEVEL: All Levels Welcome]
    TRANSP:OPAQUE
    SEQUENCE:3
    END:VEVENT
    END:VCALENDAR

    I copied your text and saved it as a .ics file before dropping it on iCal. It added 4 new events, Monday-Thursday next week.
    AK

  • Unable to import PKCS12 certificate file to ACE module

    Hi,
    I'm currently in the process of replacing my CSS-appliances with the ACE module. So far everything's been smooth, but when I'm trying to import a certificate file to the respective context using the "crypto import"-command, ACE can't recognize the filetype, it's just marked as UNKNOWN. On the CSS I had to specify PKCS12 as the fileformat, but this is apparently not an options on the ACE. Does anyone know the equivalent commmand on how to import a PKCS12-file to the ACE?
    Thankx
    /Ulrich
    PS! I haven't created a cert chaingroup, as I was told this would not be necessary.

    Hi Ulrich,
    Short answer is you cannot import PKCS12 format. You'll need to extract the component parts into PEM format outside of the ACE and then use crypto import.
    You will also need a chaingroup unless this is a self-signed certificate. Again any intermediate and root certificates will need to be in PEM format.
    HTH
    Cathy

  • Unable to import merep text file as a data object in DOE

    Dear All,
    I have exported a sync bo from MI 2.5 system, to a text file. Then i have tried importing the same text file into DOE. Then the following error has occured.
    "No active nametab exists for ZEFLMI_DOC_HDR_T51".
    I am unable to understand what could be the problem. Can someone please help me, how to resolve this issue, so that syncbo can be imported as a data object.
    Regards,
    Kiran.

    Hi,
    The backend for middleware should be same as what it was in MI.
    the erro comes when the corrosponding structure in a bapi doesnot exists in current backend.
    Please check if the structure ZEFLMI_DOC_HDR_T51 exists in backend.
    Thanks,
    Rohit

  • I am unable to import NEF RAW files into PSE10 from Nikon d600

    How can I find out what version of Camera RAW my PSE10 is currently using and how can I get an edition which will support this. Strangely enough I also have Lightroom 4.3 on same PC and it does import NEF from D600, but I want to be able to bring them directly into PSE10 as well.
    Any help would be appreciated
    PS - My PC is a Windows 7 64 bit operating system

    Michel
    Thanks for the response.
    I had downloaded  ACR 7.3 separately but there followed some confusion because I found a "Camera Raw.8bi" file in 3 different locations on my windows 7 64 bit PC
    I found it in
    C:\Program Files\Adobe\Adobe Premiere Elements 10\APD\Photo Downloader\plugins
    C:\Program Files\Common files\Adobe\Plug-Ins\Elements 10\File Formats
    Eventually I found this location
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 10\File Formats
    and if I swapped in Version 7.3 here ... now the PSE10 ORGANIZER can read in the NEF files into the Catalog and I can see the thumbnails
    However when I try to edit one of those files I got an error message - "unable to use the Camera Raw plugin - it is not compatable with this version of Photoshop Elements"
    ... which confirms what you say
    With the old version that was (is now back) on disk - version 6.7.0.339 the downloader actually copied the NEF files to disk but woulod not take them into the organizer even.
    Final Question - Will a simple upgrade to PSE11 from PSE10 do it for me ? will it bring ACR 7.3 with it and place it into the correct location on disk or must I keep my downloaded ACR 7.3 and place the file after a PSE11 upgrade.

  • Unable to import the License file

    Dear Experts,
    I am facing a very critical issue,
    I have a new server and i have installed the basic pack of SAP 2005B PL 05.
    Now i have requested a license key and tried to import it.It throws me an error stating "unable to verify digital signature for license file".
    I have referred the SAP Note and tried out few suggestions but it did'nt help me.
    Am i missing anything here, pls advice. Issue is very critical.
    Thanks
    Deepak

    Hi!
    SAP License is not support for older version of SAP. You need to install SAP B1 2007B PL 10 or above version.

Maybe you are looking for