Unable to import master-subdocuments from Word

Hello all, importing a Word master document that is linked to subdocuments leads to an error message (4005) in RH8. It is possible, but not practicable to import the subdocuments one by one. Is this a known problem and is there a way to import linked master-subdocuments this way?
Otherwise, is there an easy way to run the documents together in Word so that RoboHelp can import it all?

RH will only import a single document so that takes us to your "otherwise".
At the end of one document, in Word go to Insert > File and browse to the next document. Repeat until all documents are in one.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • Importing a document from Word.  How do I change the tabs for the whole document?

    I am new to pages.  In importing a document from Word, the tabs are all messed.  The help topics work fine for adding/changing tabs... only it applies to a single line.  I cannot locate info on how to change the settings for the document.  Any help?

    d,
    A set of Tab stops applies to a Paragraph (not a line). A change in stops will apply to all paragraphs selected. A good way to make all your paragraph styles the same is to set up one paragraph the way you want it, then Format > Copy Paragraph Style. Then Select the entire document (Command-A) and Format > Paste Paragraph Style.
    Shortcuts for Copy Paragraph Style and Paste Paragraph Style are Shift-Command-C and Shift-Command-V.
    Jerry

  • Importing a TOC from Word

    Apologies as always if already mentioned, but could not find it...
    I have a large PDF I produce regularly from multiple other PDFs. The large PDF has a 'custom' TOC that I keep in a Word document (i.e. I don't use the bookmarks created by Adobe). I'm looking for a way - if it exists - to 'import' the TOC from Word to populate Bookmarks in Acrobat. Doesn't have to be Word - Excel or even Notepad would be fine. Acrobat 8 Professional on a Wintel box running XP.
    Thanks in advance for any help.
    Nicky 1

    Yes, you can automate getting the text into bookmarks. In your list document, I suggest creating and applying a custom style for your bookmark-text paragraphs.
    Then create a PDF from your list document, but specify that PDFMaker create bookmarks for paras with the custom style. This results in a PDF with your bookmarks -- they don't link to the right location yet, but they do contain the correct text.
    You can even create a multiple level structure of bookmarks if you use more than one custom style etc.
    It's just like creating bookmarks in a normal document, but your list document doesn't have any content other than the "headings" you want to convert to bookmarks.
    Bear

  • Importing master data from R/3 through functional modules

    I am facing the below error when I try to import master data from R/3 through the inbound functional module /DMF/MDIF_PRODUCT_INBOUND to the PMR component (PMR - Promotion Management for Retail).
    "Runtime error CALL_FUNCTION_NOT_FOUND has occurred"
    Landscape - I have RTLDMF 1.1 and RTLPROMO 7.0 installed on top of Netweaver with EHP1 in a server which also has BI system. While the R/3 is present in another system.
    Appreciate any help. Thanks!

    Hi Khan,
    You can create your own datasource source, by Tcode RSA2. In this link you find more information:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/28/4c553c42360a40e10000000a114084/content.htm
    Also please check this link, that provides the steps to create/maintain the generic datasource:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    I hope it contributes.
    Regards,
    Sinara Moraes

  • I am unable to import my favorites from internet explorer dueto the import data from option being grayed out under history, library, import tab, any help please

    i am unable to import my favorites from internet explor due to the import data from... option being grayed out under his, library, import. any help please

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    To see all History and Cookie settings, choose:
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"

  • Unable to import .avi files from digicam

    I'm unable to import .avi files from my finepix digicam. I get a message that says the files are unreadable. With the previous iPhoto version (v 06) I didn't have any problems. Any thoughts?

    I agree with TD regarding Image Capture. I have the same problem with larger video clips and iPhoto 6. You can use Image Capture, choose "Download Some", select just the movie, and upload it to your Desktop. Ignore the blue Progress bar, as it seems to jump from zero to 100% with no real indication of the download progress. Be patient, leave it alone, and eventually the movie should appear on your Desktop. Once there, iPhoto should have no trouble importing it.
    Regards.

  • Unable to import movie files from iphoto '08 into imovie HD

    I have recently bought a 2008 macbook (2.2 GHz) and have recently downloaded imovie HD in addition to owning iLife '08 due to its extra capabilities. I have found that I am unable to import any of my movie files from my iphoto library folder as it seems to need to open the actual iphoto application before the files can be accessed. In addition, when not using any specific program it would be nice to be able to access my photo/video files within the iphoto folder without iphoto automatically opening as the default viewer.
    Any ideas??!! Thanks.

    ahostmadsen wrote:
    .. and I import AVI video clips directly without converting to .dv, without problems.
    lucky you.. .avi is just a container, no 'format'/codec .. I can show you dozends of .avis, which will NOT import into iMHD6, due to being playback-codecs, not convertable by the underlying Quicktime engine into separte, editable audio+video streams ..
    .. If you convert to .dv, the size just blows up.
    dv is 13GB/h and a codec meant for editing; e.g. it stores every frame (video=30 frams/sec) of a recording, as mpegs usually doesn't do so.. = your Mac has to estimate content, when converting and 'recovering' the content = lossy process.
    iMHD6 is a dv-editor; the mpeg4 feature is only a toy, to spice up iSight recordings.. for sure, the QTengine can convert a lot, but too much conversion (from one lossy codec, e.g. divx, into another, e.g. mp4) means a (dramatic) loss of pic quality..
    my 5€ cents ..

  • Problem importing PDF file from Word to Pages on IPad 2

    I am trying to import a PDF file from Word 2007 to Pages on my iPad 2 using the file sharing function in iTunes.
    I am able to import it, however when Pages saves it, I get the following message:
    "Pages doesn't support some od the original document.
    Objects in headers, footers, shapes, text boxes and table cells were removed.
    Merged table cells were unmerged.
    Objects were removed from table cells."
    The document is a PDF form which needs to be filled in. The document was downloaded from a website and saved as a Word document where I have been able to enter in information and print it.
    I would like to be able to fill in the form and print it from Pages as there are other documents that accompany this PDF file. (these are plain text Word documents which I have succesfully imported and can edit and print.)
    Is there any way for me to achieve this?
    Cheers,
    Jules

    I don't think Pages can do this - you'll need a dedicated iPad PDF program that can fill in and edit PDF files. And even then, reports are that different readers work or dont' work with different PDF's... I use Goodreader, which can do some PDF filling in, but you might want to check the app store for others.

  • Unable to import Software component from SLD :PI71 SP05

    HI Friends,
         We have created  SWC in SLD.
    From ESR when we click on "Import from SLD".I am getting error "Could not read list of Software component versions from SLD".In details the error is as follows.
    "-- error description--
    Could not read list of software component versions
    from SLD (COULD_NOT_READ_SWCV)
    User credentials are invalid or user is denied access
    All the eight roles for SLD have been provided in SU01.
    SAP_SLD_ADMINISTRATOR
    SAP_SLD_CONFIGURATOR     
    SAP_SLD_DATA_SUPPLIER     
    SAP_SLD_DEVELOPER
    SAP_SLD_GUEST     
    SAP_SLD_ORGANIZER
    SAP_SLD_SUPPORT
    SAP_SLD_CONTENT_SYNC
    In Addition to this any new role need to be assigned?
    Regards
    chandra dasari

    Hi,
    Refer this thread..
    unable to import from SLD
    Hope it helps...
    Thanks,
    Kumar.

  • Issues importing text in from Word.

    I have just learned how to place text from Word into InDesign, more importantly how to flow the text on multiple pages. However, the word document I have was created by someone else and from what I can tell each “column” on each page are individual text boxes, furthermore each new line has been “returned/entered”  from the last to create a column. I can’t imagine why the maker of this document didn’t use the column button but is there any way that I can smoothly transfer this information?! Currently I am copy/pasting into a new document to have a running text then will go back and delete all the enter/returns.
    Basically, I am trying to take one entire book from word and drop it into indesign...
    Thanks!

    Importing a badly written Word document will result in a bad InDesign document ...
    To quickly change all hard returns, you can select these lines and do a Find/Replace. In the Find What field, enter the code for a hard return: ^p (it's a code, rather than pressing the Return key).
    In the Replace With field, enter a single space. Make sure the search scope dropdown at the bottom is set to "Selection", then hit "Change all". You wouldn't want to change all hard returns in your entire document into spaces!
    To finish this off, you might want to search for a double space and replace with a single space. Repeat until ID reports "No changes made".

  • Unable to import new images from finder into lightroom 5 since update

    Since I updated my Lightroom 5 and Photshop CS6, I have been unable to import images from my finder (MacPro) or save edited images from Photoshop editor back into my Lightroom 5 library. Please help!

    I Managed to edit images in Lightroom and then clicked on photo editor photoshop to make further editiding.After i click on save, it doesn't come back into my Lightroom 5 library.
    i Then saved the image into my computer and tried to import from there, but images quickly appear and then disappear :-(
    thanks for the quick reply!

  • Importing dropdown text from Word - Using Word for editing

    Hi. I'm in a new position, new to Robohelp (running Robohelp 8) and new to the documentation world, although I have been deeply immersed in Word for years. I'm running word 2007 in my new job.
    I am trying to set up a workflow in which documentation is maintained in Word documents that are linked to a Robohelp projects. There is a Robohelp project for each software product.
    I have been able to get most of it working, using matched styles, but I can't seem to find information about how to create a structure in Word that will convert into DHTML dropdown and expanding text in Robohelp. I hope I am not overlooking something obvious.
    We use dropdown text widely in our documentation, as a tool for offering small amounts (a sentence or a paragraph) of supplemental or explanatory information. Is there a method of preparing this material in Word and then importing it into Robohelp? I don't want to have to recreate it after each import from Word.
    Thanks for any guidance or suggestions you can provide!
    -- George

    Hi folks, Rick chiming in here.
    As I see it, there simply isn't a way to format anything in Word that will translate to a DHTML drop-down when it arrives in RoboHelp Happy Land. This is largely because the DHTML drop-downs don't occur by virtue of simply applying CSS. You must use RoboHelp to choose what becomes the drop-down and special code is added. Essentially, the text that is part of the drop down is placed in a special DIV at the top of the topic. Then JavaScript is used to present the DIV.
    However, I do have a thought or two. And part of this will require that we ask Willam to chime in as he seems to be our resident RoboHelp Scripting guru.
    Here's the thought. You stated that you are being diligent about applying styles. So I'm wondering if you developed a couple of specific styles that you would apply in Word. Then by knowing the name of the styles, assuming these carry over into RoboHelp, you could use the RoboHelp scripting engine to scan the text for the style name and magickally convert that to a DHTML drop-down. Again, only Willam (or Praful from Adobe) can say whether that will work.
    The other thought surrounds migrating all of it to RoboHelp and abandoning Word. You have the PowerPoint issue to consider. And again, I'm wondering if CSS can come to our rescue here? My thought on that is that you could have the specific CSS styling in RoboHelp that you are using in Word. When you create the printed output from RoboHelp, hopefully that styling would translate right into the document that could then be used to propagate the PowerPoint.
    So there you have it... Live, from Kansas City, MO!
    Cheers all... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • BPC NW - Error Importing Master Data from BI to BPC

    Hello,
    I am importing MD from BW to BPC; openhub is working as required, and creating the corresponding file in the application server.
    However, when I run the package from Data Manager, it is displaying the following error:
    "An exception with the type CX_SY_STRUCT_COMP_NAME occurred, but was neither handled locally, nor declared in a RAISING clause.
    No Component name specified for Component 6."
    I have been looking other posts and OSS notes, and looks a problem related to DB; however in this case we do not have any dump.
    Has anyone encountered the same issue?
    Thanks&Kind regards,
    Begonia

    Hi Begonia Boloqui,
    After you extracted master data from BI using Openhub. The file is available in the application server.
    Before you run the package from Data Manager.
    Please examine the file data contents.
    From the Action Pane, Click Manage Data and then clicking Preview data file
    System allows you to preview the first 200 lines of a data file. Check whether data record is compatible with dimension definition and the mapping from external to internal members.
    Looks like error is with COMP_NAME field?
    Hope this information is useful.
    Regards,
    Rajesh Muppala.

  • Unable to Import RFC Models from CRM

    Hi Experts,
        I am unable to import adaptive RFC Models from CRM System,It is giving an error.Previously i imported Bapi from R/3 system and it is working fine. Is it that we can only import Bapi from R/3 system only i.e ABAP Backend.
    I am waiting for all your reply.

    hi
    check this
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3fe9e790-0201-0010-f787-e2e78c559f38
    what content u want to get from bapi
    Organizational Model Transfer from R/3 to CRM
    bvr

  • Unable to import RAW files from my 400D, (XTi) Even if its a supported cam

    Hi,
    I have been unable to upload RAW files from my Canon XTi, a.k.a. 400D. I know this camera is supported and I am running Mac OS X 10.4.8 on an Intel Core Duo Mac Book.
    iPhoto had no issues with my previous Canon 350D raw files, yet its not working with the 400D. Is very likely a matter of installing an update, yet when i tried to install the ppl version it stated that this was not to be installed on this system. Would there be an update specific for Intel based machines to support the 400d?
    Has anyone experienced this same issue that would like to share in their resolution? This would definetively be appreciated.
    Happy Holidays and may you get the PS3 or something cool like that.

    Dendrite
    You need the Universal version of that update the ppc version won't work on your intel based machine:
    http://www.apple.com/support/downloads/digitalcamerarawsupportupdate101universal .html
    "This update improves RAW file format compatibility for the following digital SLR cameras:
    -Canon Digital Rebel XTi / 400D / Kiss X Digital
    -Nikon D80
    -Pentax *ist DS"
    Regards
    TD

Maybe you are looking for