Unable to import merep text file as a data object in DOE

Dear All,
I have exported a sync bo from MI 2.5 system, to a text file. Then i have tried importing the same text file into DOE. Then the following error has occured.
"No active nametab exists for ZEFLMI_DOC_HDR_T51".
I am unable to understand what could be the problem. Can someone please help me, how to resolve this issue, so that syncbo can be imported as a data object.
Regards,
Kiran.

Hi,
The backend for middleware should be same as what it was in MI.
the erro comes when the corrosponding structure in a bapi doesnot exists in current backend.
Please check if the structure ZEFLMI_DOC_HDR_T51 exists in backend.
Thanks,
Rohit

Similar Messages

Lightroom Unable to Import HDR Image File Opened as Smart Object

I just started using Nik HDR Efex Pro and created an image file in PS CS4 Extended which was opened as a smart object and saved to play around with later. The image shows up in Photoshop as "[image number]_hdr.tif" and both PS CS4 Extended and CS5 have no problem opening it. But I cannot import it into LR3. LR3 gives me a dialogue box which says in effect that the image file cannot be imported because it is corrupt or unsupported. I am guessing the latter because (perhaps) as a smart object the image file is 32bit(?) In any event, has anyone tried and had luck importing to LR3 in this circumstance? Is it "operator error" or just something LR cannot handle? Also, if you have encountered this problem, do you have a workaround? Thanks in advance.

Hi,
The backend for middleware should be same as what it was in MI.
the erro comes when the corrosponding structure in a bapi doesnot exists in current backend.
Please check if the structure ZEFLMI_DOC_HDR_T51 exists in backend.
Thanks,
Rohit

Error while importing a text file for a list of values

Hi Experts,
While importing a text file for a list of values in designer, I am getting error message as below:
"Invalid setting in Excel key of the Engines section of the Windows Registry. (3433)".
I am using BO XI R3. Universe Designer version : 12.1.0.882
Any suggestion ?
Regards

plzzzzzzzzzzzzzzzzz.............sme1 help me out

"Import from Text File" & "Upload from Clipboard" icon not appearng in F110

Hi Experts,
While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
Can you please let me know how to bring that icons there?
Points would be awarded.
Rgds,
Shailesh

Hi Ravi,
I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
Rgds,
Shailesh

When I import a text file(comma separated )into a numbers spread sheet all the data goes into one column. Why does the text not go into separate columns based on the commas.

When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators. Excel allows you to do this during the import.. Is there a way to accomplish this in numbers without opening it in Excel and the importing into Numbers.

Your user info says iPad. This is the OS X Numbers forum. Assuming you are using OS X… Be sure the file is named with a .csv suffix.
(I don't have an iPad, so I don't know the iOS answer.)

How to import a text file created in Pages (iWork '08) to Photoshop Elements

I am totally a novice at working with Photoshop Elements. I need help. I want to create my business card in Photoshop Elements with a background image and then a text layer over the background layer. The logo and text was created in Pages (iWork '08). Can I import this text file to Photoshop Elements and if so how do I do that? I cannot create the same logo in Elements unless someone can tell me how to draw a circle with a transparent background so that just the outline of the circle shows and the background comes through. Thanks for any help you can offer. I have OS X Snow Leopard 10.6.4 and Photoshop Elements 6.

In PSE, to draw an empty circle use the elliptical marquee tool and hold down shift while you drag to constrain it to a circle. That will give you an empty selection, then go to Edit>Stroke (outline) selection. A window appears where you can choose the width and color of the stroke.
However, I'm not understanding why you would want to create your business card in PSE rather than in Pages or equivalent. Is there a special reason for this?
EDIT As for the text file, it would be simpler just to retype it in PSE, since it can't be very much text. Remember that PSE doesn't do all the fancy things with text that Pages can, although it can do some things (like warping) that Pages can't.
You could activate the text tool and use copy/paste, but you'll lose most of the formatting.

Importing a text file with variable values into web reporting

Hello,
I'm looking for a possibility to import values from a text file into a variable selection in Web reporting.
With BEx reporting in Excel this is possible, by clicking on the multiple selection button in the variable popup screen, and subsequently selecting the "Import from Text file" button.
However, this function seems not to be available for web-reporting...
It would be great if someone could help me out with this!
Thanks & regards,
Arvid

Hi,
we could resolve this issue, so i thought it may also be helpful for others:
In our example we used a file with numbers for materials. This file is stored somewhere in a directory, to which SAP BI must have authorization to read.
The file looks something like this:
4711
4712
4713
4714
The file is named "import.txt" and lays in directory "/usr/sap/EC6/files/bi/"
*& Include           ZXRSRU01
* global variables
Data: intern_range LIKE LINE OF i_t_var_range,
      l_s_range    TYPE rsr_s_rangesid,
      line(100)    TYPE c,
      p_file(128) TYPE c,
      length_rangelow type i,
      tmp_rangelow     like l_s_range-low.
* internal tables for selection-transfer from transaction
* Data: BEGIN OF it_file occurs 0,
*        it_p_file(128) TYPE c,
*      END of it_file.
IF i_step = 1.
** variables can be changed or set before pop-up appears
CASE i_vnam.
* take material from external file to selection-list
     WHEN 'ZSD_UPMA'.
** call of transaction, with which the path can be set
*CALL TRANSACTION 'ZBW_VARIABLE' using it_file
*MODE 'A'      " call should be visible, so that variable can be set
*UPDATE 'S'.   " first transaction, then processing
** Der Pfad, der in dem Selektionsbild eingegeben wird, wird an die Variable übergeben
** Der Set-Parameter ist in Report ZSD_SELECT_VARIABLE
* get parameter id 'VAR' field p_file.
p_file = '/usr/sap/EC6/files/bi/import.txt'.
* further handling of variable in BI
      OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        READ DATASET p_file INTO line.
        WHILE sy-subrc = 0.
          IF line(2) <> '//'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            l_s_range-low = line.
* fill with leading Zeros
* in variable tmp_rangelow the value from l_s_range-low is taken
    tmp_rangelow    = l_s_range-low.
* read the length
    length_rangelow = strlen( tmp_rangelow ).
* in our case: material has 18 characters
    while length_rangelow lt 18.
      CONCATENATE '0' tmp_rangelow INTO tmp_rangelow.
      length_rangelow = length_rangelow + 1.
    endwhile.
* initialize l_s_range-low
    clear l_s_range-low.
* set with filled values
    l_s_range-low = tmp_rangelow.
* transfer to structure
            APPEND l_s_range TO e_t_range.
          ENDIF.
          READ DATASET p_file INTO line.
        ENDWHILE.
      ENDIF.
      CLOSE DATASET p_file.
    ENDCASE.
ELSEIF i_step = 2.
** in step 2 all variable values from pop-up input can be processed or
** User Exit variables can be derived
* UserExit Ende.
ENDIF.
Hope i could help!
Best regards,
Tobias

Renderfarm error: Pre-Flight Error: Unable to import previously rendered file

I have an error message I am receiving during network rendering on a renderfarm, and was hoping for some help. The error is this: "Pre-Flight Error: Unable to import previously rendered file."
Here is my setup and some details:
The user makes a comp, and adds it to the render queue set to render as a quicktime movie file. Then they run a script which precomps everything and sets it to render as a image sequence with "Skip existing files" checked. This comp also has a post-render action set to import & replace usage. After this comp is rendered, it gets pulled back into the project and the original render item starts rendering the movie file using the previously rendered image sequence as it's only layer.
This project gets saved to a server where our render nodes are watching the folder. All the render nodes pick up the project and proceed to render the image sequence. Then, after they are done, 1 machine will pick up the second render item and begin rendering the image sequence into the final quicktime movie.
All of this goes smoothly about 90% of the time. However, in some cases an error shows up in the watch folder html page for the 2nd render item (the one converting the image sequence to the movie). The error says "Pre-Flight Error: Unable to import previously rendered file." After the error occurs, no machines will start rendering the project.
My first guess is that the render engine on one machine somehow skips rendering the image sequence comp, and then tries to render the quicktime movie comp and fails because the image sequence has not yet been rendered. However, I can't figure out why After Effects would skip rendering the first comp.
Does anyone have any idea?
Thanks for the help, and let me know if you have any more questions about the setup,
Adam

Well, you should get used to the fact that it's simply gone... Just looking at your screenshot makes me grind my teeth. From delayed writing of files to fragmentation in user folders to Windows doing obscure things this could be anything, but seriously, saving important files on the desktop? That is simply sloppy data management. There is no other way to say it. Read up on what proper file naming, incremental saving and backups are good for and why keeping work files separate and away from your user home directories is actually a quite simple, yet effective concept to avoid exactly that kind of issue.
Mylenium

Problem in bulk import of text files in SQL Server

Hi,
I am using sql server 2012 x 64 and trying to import some text files (tab/ comma separated) and ms access files in sql server tempdb
I am trying bulkinsert on text file but it is inserting all data in a single line in sql while in text file I have 1000K lines,
Then I tried importing other data using openrowset from access file but I am getting following error
Cannot create an instance of OLE DB provider "MSDASC" for linked server "(null)".
can any one please provide some assistance . If I am able to upload the data from flat text file then it will be enough as I am getting data in tsv or csv format
Nitin

If this is a one-off, I think you should try the import/export wizard in SQL Server Management Studio instead. This may be easier to get working.
If you want to this import on a regular basis with BULK INSERT, we need to see the CREATE TABLE statement for your table and a sample file. Best if you can upload the file on Skydrive, Dropbox or similar, as the exact bytes matters.
To connect to an Access database, you use the ACE provider. Never heard of MSDASC before.
Erland Sommarskog, SQL Server MVP, [email protected]

How can we import a text file in Labview,Is this process require CIN utility

Hi,
I am working in physics lab where i am working on labview and want to import a text file in labview, if anyone knows ,please mail me at [email protected]

Hi Ajay,
See attached V 7.0 example...
Hope it helps,
Nick
Attachments:
Read_txt_File.vi ‏20 KB

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

I'm creating an epk and I need to add a bio to the menu. Can I import the text file or do I need to retype the bio somewhere? What is the best way to proceed?

Electronic Press Kit.
Usually in the form of video outtakes, movie trailers, cast and crew interviews. Basically, the stuff that gets bunged onto commercial DVDs as extras or ends up on late night TV "Making Of..." shows.
To answer the OP, you want a button on the menu that leads to a still image, or series of them, set up as a slide show. You can copy/paste the text in DVD Studio and then add formatting via the Text menu. (Highlight the text and right click to access formatting controls). Or do it in a graphics application using the appropriate video image preset.

Unable to import certain image files in CS5

I currently am using CS5, and I am unable to import certain image files such as .png and.tga. When I try to import them I get an error message saying something along the lines of file type not supported. Any help?

Make sure that the images are not CMYK color space.
Already tried that, thanks
One thing to take note of is everytime I start AE I get a pop up box saying "You have at least one output module template that refers to a missing plug-in. Please check your Output Module Template". That plug-in would be the TIIFF alpha sequence output. Perhaps that has something to do with it..

Importing a text file and displaying it

Ok, my goal is to import a text file which i have done. I want to import it into a 2D array. There are 26 rows and 2 columns. Basically just a translator program. This is what i have to load the text file into java. But i am having trouble displaying the array with the data loaded into it. any ideas?
public static void loadData(String a[][])
     throws java.io.IOException
     String file = "C:\\print.txt";
     String inLine;
     int row;
     FileReader fr = new FileReader(file);
     BufferedReader br = new BufferedReader(fr);
     for (row = 0; row<=26;row++)
          a[row][0] = br.readLine();
          a[row][1] = br.readLine();
     br.close();
     System.out.println(a[row][0]);
     }

my goal for this program is to have a user enter a phrase to be translated. I have the text file that i am loading into java that has the english word and then the translated word. I want to load that into the 2D array and display it. Then use a stringtokenizer for the translate part. But the problem i have right now is trying to display the data that was loaded into the array. any ideas?

Unable to import DWG CAD files to WCS

Hi all,
I am trying to import a DWG CAD file to my WCS 4.2.62.0 for a floor area. Everything I read says I can import DWG CAD files (as well as gif, jpeg, and png) for Floor Areas but I am unable to do so. I get the following error message:
The image file is invalid. GIF, JPEG, and PNG files are acceptable image types for campuses and outdoor areas. DXF and DWG CAD files are acceptable in addition to GIF, JPEG, and PNG for Floor Areas.
Any ideas on why I am unable to import a DWG file as a floor area?
Thanks in advance.

Hi MH, thanks for your response. Here are some links to the literature I was referring to.
This is the WCS Configuration Guide, release 4.2:
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00808e525f.html#wp1125793
This is the WCS Release Notes for WCS version 4.2.62.0. It appears that support for AutoCAD files is a new feature in this release:
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCSRN4_2.html#wp44484
I hope those links work ok for you. I'll have to take a look at this Trapeze/Nortel 'RingMaster' (it is a great name).
Thanks,
BA

Import a text file into database

If anybody could help me with this, i would GREATLY appreciate it! I need to write a procedure to import a text file into an oracle database table. -Thanks!

See my response in Re: import a text file into database.
Cheers, APC

Unable to import merep text file as a data object in DOE

Similar Messages

Maybe you are looking for