Unable to import powerpoint .mov files nor see stuff in my time line

any ideas as to why I can't import my powerpoint .mov file into imovie? Powerpoint movie was created with the mac powerpoint software and make movie seems logical.
Also I can't see items in my time line correctly. If i choose a frame it shows me stuff either ahead of that frame or prior...never that frame I'm choosing.

hi there, i'm not sure but i think it is because the powerpoint.mov file is actually an animation and has 3 x video tracks that cross fade. I have had the same problem. good luck, Phil.

Similar Messages

  • Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides.  I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case.

    Running Captivate 8 on a Macbook and I am unable to import Powerpoint 2011 (which is up to date) files or slides.  I get an error saying that either the file is damaged or I am using an older version of PP....which is not the case.  I tried creating a very simple PP file with just a few words on one slide...ran a compatibility check and all was good.  Still could not import that simple slide into Captivate.

    OK...found out it did not like me saving as a *.pptx.  When I save it as a *.ppt file it imported in correctly.  Is this what I will need to do moving forward?  I am not sure if I am losing any functionality in the process...

  • After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow?  Thank you, Filippo

    On IMac 10.9  After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now?  Anyone know?  Thanks, Filippo

    I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
    I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
    Thanks

  • Renderfarm error: Pre-Flight Error: Unable to import previously rendered file

    I have an error message I am receiving during network rendering on a  renderfarm, and was hoping for some help. The error is this: "Pre-Flight  Error: Unable to import previously rendered file."
    Here is my setup and some details:
    The user makes a comp, and adds it to the render queue set to render as a  quicktime movie file. Then they run a script which precomps everything  and sets it to render as a image sequence with "Skip existing files"  checked. This comp also has a post-render action set to import &  replace usage. After this comp is rendered, it gets pulled back into the  project and the original render item starts rendering the movie file  using the previously rendered image sequence as it's only layer.
    This project gets saved to a server where our render nodes are watching  the folder. All the render nodes pick up the project and proceed to  render the image sequence. Then, after they are done, 1 machine will  pick up the second render item and begin rendering the image sequence  into the final quicktime movie.
    All of this goes smoothly about 90% of the time. However, in some cases  an error shows up in the watch folder html page for the 2nd render item  (the one converting the image sequence to the movie). The error says  "Pre-Flight Error: Unable to import previously rendered file." After the  error occurs, no machines will start rendering the project.
    My first guess is that the render engine on one machine somehow skips  rendering the image sequence comp, and then tries to render the  quicktime movie comp and fails because the image sequence has not yet  been rendered. However, I can't figure out why After Effects would skip  rendering the first comp.
    Does anyone have any idea?
    Thanks for the help, and let me know if you have any more questions about the setup,
    Adam

    Well, you should get used to the fact that it's simply gone... Just looking at your screenshot makes me grind my teeth. From delayed writing of files to fragmentation in user folders to Windows doing obscure things this could be anything, but seriously, saving important files on the desktop? That is simply sloppy data management. There is no other way to say it. Read up on what proper file naming, incremental saving and backups are good for and why keeping work files separate and away from your user home directories is actually a quite simple, yet effective concept to avoid exactly that kind of issue.
    Mylenium

  • When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

    I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

    Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
    http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
    And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
    Patrick

  • Dynamically importing a .mov file into flash

    Hi,
    I need to import a .mov file into a flash file and create a
    .swf movie. I can do it through File > Import Movies option. But
    I want to make it dynamic and import the movie. I would like to use
    ActionScripts rather than the File> Import options. Pls let me
    know if this is possible. Let me know if you have any questions.
    Appreciate any help.
    Thanks & Regards,
    Magesh

    You can only dynamically load at runtime FLV movies.
    You can automate the authoring time environment but this is
    only with the Authoring tool. See
    Extending
    Flash

  • Trouble Importing ANY movie files

    Everytime I go to import a mov. file, I get this error message that I've attached.
    Using cs4 and never had this problem before yesterday.
    I know this isn't much info, but can anyone SIMPLY DEFINE the nature of this message and why it would tell me that?
    Thanks you so much!

    Yes, this article was very helpful. I want to try and erase the xmp files associated with the project....but after doing a search of my system cannot see or find any XMP files associated with this project. I even tried starting a new project and importing in all the assets, but I get errors doing that as well.
    I guess I need to learn about XMP files!
    Thanks for your caring help, I know some of this stuff baffles even the most seasoned vets...lol.
    I have included a screen shot if anyone else wants to take a gander.
    Thank you guys!

  • "Error: Final Cut Pro was unable to read the movie file just captured"

    Hello everyone!
    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
    Any ideas?
    Thanks
    Efrain
    G 5   Mac OS X (10.4.8)  

    We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
    You eventually want to figure out how that happened and make sure you fix it.
    Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
    "Error: Final Cut Pro was unable to read the movie file just captured"
    <
    You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
    Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
    It's not an FCP issue, it's hardware.
    bogiesan

  • Just upgraded to Lion and can no longer import any .mov files ("file not supported") to 3.1.3.  Also can no longer view any .mov or .mp4 files already in library.

    Have been using Aperture 3.1.3 with no problems.  Importing from a Nikon D80 (RAW & JPEG), Casio (.MOV) and Flip (.mp4).  Could import and view all videos without issue prior to Lion upgrade.  After Lion installation, can no longer import .mov files (get "file not supported" error) or even view any .mov or .mp4 files currently in library (even though thumbnail is present).  Can watch the .mov files directly on my camera using Quicktime in Finder but can't even drag & drop that file into Aperture.  Anybody else having similar problems?

    Still no resolution and Geniuses at store could not assist.  Unfortunately, it looks like not all the applications were ready to support the Lion operating system.  We could not import any .mov files, could no longer view any .mov files already in my Aperture library and could not email any .mov files.  Totally frustrated.  Use Aperture almost daily and can't lose the video functionality.  Was also running dog-slow.  Constantly looking at the spinning wheel.  Geniuses suggested that I wipe out hard drive and reinstall Snow Leopard.  Had full backup on external drive with Time Machine. 
    Not an easy process though...had to reinstall several times (at 5 hours each time) because I continued to have issues.  Finally figured out that I needed to delete every backup file from Time Machine on external drive from the date I installed Lion because some of the hidden files were still migrating back to Snow Leopard.
    I had to:
    1. Delete all time machine backup files from date/time of Lion installation forward
    2. Do "clean" installation of Snow Leopard (wiped hard drive using disk utility and booted with Snow Leopard disc)
    3. Chose option to reinstall from backup off Time Machine which eventually got me back to Snow Leopard desktop
    4. Deleted Aperture program and reinstalled (I had to install Aperture 2 and then install Aperture 3 upgrade.
    5. Reinstalled iLife apps
    5. Applied all Apple updates available (again this took a few hours because there were several updates from Snow Leopard's original release plus Aperture 3 and other application updates)
    Still doing some tweaking on some of my other apps but got everything back to where I originally was.  Now plan to wait on a few version updates from Lion before reinstalling.
    I am one of Apple's biggest fans, but was very disappointed in the fact that I lost functionality in one of their own pieces of software (which I use the most!)  by installing Lion.

  • Cannot import a .mov file into the library

    I am trying to import a .mov file into my library so I can
    create a .fla file. Every time I try to import it into the library
    using the import wizard, it starts the importing process and always
    quits not quite two minutes into the process. It then returns me to
    the front page of the import wizard. I have done this before with
    absolutely no problems.
    The one thing that I am wondering about is the size of this
    particular .mov file. It is 377MB. Do you think this may be part of
    my problem? Thank you in advance for anyone's input or
    suggestions!

    Jeremy Williams wrote:
    > I am trying to import a .mov file into my library so I
    can create a .fla file.
    > Every time I try to import it into the library using the
    import wizard, it
    > starts the importing process and always quits not quite
    two minutes into the
    > process. It then returns me to the front page of the
    import wizard. I have
    > done this before with absolutely no problems.
    >
    > The one thing that I am wondering about is the size of
    this particular .mov
    > file. It is 377MB. Do you think this may be part of my
    problem? Thank you in
    > advance for anyone's input or suggestions!
    I would consider 10mb to be too big for a flash file. Even if
    it was CD
    I would load it dynamically to avoid performance problem.
    377mb is out of the question way beyond flash ability to
    maintain stable
    performance, not just the final output but the IDE itself.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Does anybody know if there is a way to import 2 movie files in logic....

    Does anybody know if there is a way to import 2 movie files in logic....I am getting 2 files in an hour and i need to figure out how 2 combine 2 mov. files into logic to put them together in dvd...i am doing a score.....thanx

    As far as I am aware no the only work around is that you create 2 quick time movies import them into one session of imovie then export as a quick time file which yu would then import into Logic hope this helps

  • Having problems importing my .mov file.

    I am having problems importing several .mov files into iMovie. I also can't import .wmv files and I have been utterly confused. I know I have to convert the files but I don't want to pay for a program because I will only be converting 4 files. Please help!

    What is Mpeg Streamclip
    It is a free conversion application that accesses the QT structure and all installed QT components without having to pay the $30 for QT Pro or purchasing GarageBand. It's "engine" is MPEG-based, so it can do some things that QT Pro cannot do ( e.g., retaining audio content when converting multiplexed compression formats). On the other hand, it cannot perform layer operations like QT Pro can so these applications are somewhat complementary.
    and is there anyway you can send me a link to download this program please?
    MPEG Streamclip

  • Unable to import certain image files in CS5

    I currently am using CS5, and I am unable to import certain image files such as .png and.tga. When I try to import them I get an error message saying something along the lines of file type not supported. Any help?

    Make sure that the images are not CMYK color space.
    Already tried that, thanks
    One thing to take note of is everytime I start AE I get a pop up box saying "You have at least one output module template that refers to a missing plug-in. Please check your Output Module Template". That plug-in would be the TIIFF alpha sequence output. Perhaps  that has something to do with it..

  • I need to import my .mov files to CS6 but the program tells me the files are unsupported. Help!!

    I am working on a really important project and am trying to import my .mov files however, the program tells me the files are unsupported by CS6. How can I convert these files to something usable? Am I trying to import them incorrectly? Please help!

    Welcome to the forum.
    What CODEC is inside those MOV files?
    What OS are you on?
    If Windows, do you have Apple's QT Pro (US $39 upgrade/unlock)? If so, then you can use it to Export to several formats/CODEC's, that PrPro can use.
    Good luck,
    Hunt

  • I can't import any movies/files from my desktop to make an iMovie

    I can't import any movies/files from my desktop to make an iMovie. It worked a few days ago and now I can't do anything. Also, is there a way to get rid of all the movie files that I don't need anymore? Thanks!

    Natibe wrote:
    I can't import some audio files from my computer to Logic, They play in iTunes but when I import them to logic , the regions become black almost and have no sound. Other wav's files play normally. What's the problem?
    What type of audio files? What bitdepth and samplefrequency?

Maybe you are looking for