Unable to import table in owb 9.2

i am using warehouse builder 9.2 and database 9i R2
the source databse is also oracle 9i R2
when i create a source module to import the required tabe metadata i found that
some table did not apper in the available objects
i discovered that for those tables there exist a materialized view with the same table name
for example
there is a table named emp and a materialized view emp on the source schema .
so what i have to do in order to import the table definition
thanks

Hi, I have not tested this but try renaming the Materialized view to e.g. mv_emp. This is a good idea anyhow. I didn't know one could reuse the object name of a table for an MV - a little confusing, since an MV is also more or less a table object.
Good luck, Erik Ykema

Similar Messages

Unable to import table or columns in OBIEE 11G RPD

Hi All,
We are unable to import table into the RPD using OCI 10G/11G to import the table then the import box open but we are unable to see the tables below the schema name. When we use ODBC 3.5 and created a DSN for the database then we are able to see all the tables and import them. But the problem here is that when we are using window server 7 64 bit to install client and then importing the table ODBC is not working fine as well.
Please note that we are using OBIEE 11G which is installed on unix box and we connect to RPD using client installed on windows server.
Appreciate all the help in advance.
Thanks,
Mohit

Hi Sayak,
This means we need to installed Oracle client to resolve this problem. Can you please share if you have some knowledge regarding the same.
Thanks,
Mohit

DATAIMP-ERR-1124: Unable to import table "S_CS_ANSWR_LANG"

Hi all,
hopefully can someone here help me. I can not manage to make the Database Configuration successfully til now (already 2 months working on this, because I can't get help in any forum most of the time).
After creating tablespaces and running the grantusr.sql I run the Database Configuration Wizard. It stops on importing Siebel seed data (transl) and it gives me the following error in the log file data_prim_lang:
2012-04-26 06:34:39 C:\sba80\siebsrvr\bin\dataimp.exe /u SADMIN /p ***** /c Siebel_test_DSN /d SIEBEL /f C:\sba80\dbsrvr\ENU\seed_locale.dat /w n /q 100 /h Log /x f /i C:\sba80\dbsrvr/ENU/seed_locale.inp /l C:\sba80\siebsrvr\log\install\output/dataimp_prim_lang.log /A 1
2012-04-26 06:34:39
2012-04-26 06:34:39 Connecting to the database...
2012-04-26 06:34:39 Connected.
2012-04-26 06:34:39
2012-04-26 06:34:39 Importing C:\sba80\dbsrvr\ENU\seed_locale.dat ...
2012-04-26 06:34:39
2012-04-26 06:34:39 Importing Tables
2012-04-26 06:34:39 SARM is OFF -change param SARMLevel to enable
2012-04-26 06:34:39 SARM Client is OFF -change param SARMClientLevel to enable
2012-04-26 06:34:39 SARM is OFF -change param SARMLevel to enable
2012-04-26 06:34:39 SARM Client is OFF -change param SARMClientLevel to enable
2012-04-26 06:34:39 SARM is OFF -change param SARMLevel to enable
2012-04-26 06:34:39 SARM Client is OFF -change param SARMClientLevel to enable
2012-04-26 06:34:39 SQL Statement:
select t.ROW_ID, t.CREATED, t.CREATED_BY, t.LAST_UPD, t.LAST_UPD_BY, t.MODIFICATION_NUM, t.CONFLICT_ID, t.ANSWER, t.ANSWR_ID, t.LANG_ID, t.DB_LAST_UPD, t.DB_LAST_UPD_SRC from SIEBEL.S_CS_ANSWR_LANG t
2012-04-26 06:34:39 [DataDirect][ODBC Oracle driver][Oracle]ORA-00942: table or view does not exist
2012-04-26 06:34:39
2012-04-26 06:34:39 S0002: [DataDirect][ODBC Oracle driver][Oracle]ORA-00942: table or view does not exist
2012-04-26 06:34:39
2012-04-26 06:34:39 DATAIMP-ERR-1124: Unable to import table "S_CS_ANSWR_LANG" (UTLOdbcOutputBind select).
2012-04-26 06:34:39 Error in ProcessImportFile (UTLDataImportFile).
2012-04-26 06:34:39 Error in ProcessImportFile...
2012-04-26 06:34:39 (logapi.cpp (184) err=1 sys=0) SBL-GEN-00001: (logapi.cpp: 184) error code = 1, system error = 0, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)
I guess that the command line I executed to drop some tablespaces (SIEBELINDEX and SIEBELDATA) dropped the links to these tablespaces and the table which causes the error. I used for that:
drop tablespace siebelindex including contents
and datafiles cascade constraints;
Can someone confirm me, if this can cause the error?. I am not an Oracle specialist.
I would really appreciate if somebody helps me. I am itrying to do this since months on Windows. Installed already the Oracle Client as well, Database connection works.
What should I do in this case if the Wizard doesn't run anymore because of this error?...I wouldn't like to install and reinstall what I already installed (Siebel Gateway, Siebel Enterprise, Siebel DB, etc. it's a lot of work and stress. Please help me :-(.

I suggest you the following:
1. recreate your tablespaces to make sure there is no previous data imported or tables created.
2. rerun grantusr.sql
3. make a backup of all master_*.ucf files under siebsrvr/bin folder
4. delete all master_*.ucf files under siebsrvr/bin folder
5. make a backup of the siebsrvr/log/install folder.
6. remove the siebsrvr/log/install folder.
7. launch the db config wizard and check if it works now.
I suspect there is some old parameter being used from your previous tablespaces.
If above is not helpful, provide the contents of the log file generated when process failed and upgwiz.log.
Hope it helps,
Wilson

BODI-1112339 - Unable to import table in BW datasource QA Environment

Hi,
I'm using BusinessObjects Data Services XI 12.2.2. I am trying to import table to BW datastores QA environment but unfortunately it's failing. Can someone help me? Below is the error message that I get:
RFC CallReceive error <Function RFC_ABAP_INSTALL_AND_RUN: . SAP System has status 'not modifiable'. The problem may go away if you change the SAP datastore property to Execute in background(batch)>.
I already set the Execute in background(batch) to Yes but it also failed to import.
Please advice.
Thanks and Regards,
Randell

Hi Henry,
I am also getting similar error for my SAP BW data store. The exact message is as under
Error: Cannot import the metadata table <name=DR3_600),
Import transfer structure failed:
Infosource <ZASSET_ATTR_TEXT> for source system <DR3+600>, (BODI-1112339)
Did you manage to fix this? Provide the hints if you manage to fix it.
Regards,
Bhavesh

***Unable to import table which consists of nested tables

Dear all;
I have a problem on migrating my Oracle 8.1.7 database from windows nt environment into the ibm aix 4.3.3 environment. I have been using the import export utility. Exporting the data from the database does not produce any error but importing the export file produces the error as below;
Connected to: Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
. importing IIMS's objects into IIMS
IMP-00017: following statement failed with ORACLE error 2331:
"CREATE TABLE "CMGC_CURRENCY" ("CODE" VARCHAR2(10) NOT NULL ENABLE, "DESCP" "
"VARCHAR2(60) NOT NULL ENABLE, "X_RATE" NUMBER(10, 6) NOT NULL ENABLE, "X_DA"
"TE" VARCHAR2(10), "REMARK" VARCHAR2(255), "YEAR" NUMBER(4, 0) NOT NULL ENAB"
"LE, "BANK_AC" VARCHAR2(20) NOT NULL ENABLE, "NSTBL_LEDG" "NSTBL_LEDGLIST" N"
"OT NULL ENABLE, "NSTBL_XRATE" "NSTBL_XRATELIST" NOT NULL ENABLE) PCTFREE 1"
"0 PCTUSED 40 INITRANS 1 MAXTRANS 255 LOGGING STORAGE(INITIAL 65536) TABLESP"
"ACE "IIMS" NESTED TABLE "NSTBL_LEDG" STORE AS "NSTBL_LEDGLIST_LIST" RETURN "
"AS VALUE NESTED TABLE "NSTBL_XRATE" STORE AS "NSTBL_XRATELIST_LIST" RETURN"
" AS VALUE "
IMP-00003: ORACLE error 2331 encountered
ORA-02331: cannot create constraint on column of datatype Named Table Type
Import terminated successfully with warnings.
It seems that the error only occur when importing tables which consists on nested tables. I have done exporting and importing from windows NT into windows NT and from windows NT into AIX but the problem still arises. Please help.
NSTBL_LEDG and NSTBL_XRATE are the nested tables with NSTBL_LEDGLIST and NSTBL_XRATELIST as the datatype accordingly.
Thanks in advance;
andrew

Hi Sayak,
This means we need to installed Oracle client to resolve this problem. Can you please share if you have some knowledge regarding the same.
Thanks,
Mohit

OBIA / OBIEE Unable to Import Tables to DAC

hi all,
When I am trying to import tables or synonyms from the DAC console , it brings up only views like the _DFV which are views.
It does not import any tables or synonyms.
I am able to connect to the database thru sql developer /toad and can check that the tables exist in DB.
The process I follow is DAC -> Design -> Tables -> Click any of the table line and 'right Click' -> Choose 'Import from Database' -> Choose 'Import Database Tables' -> Choose the EBS data source and just enter a % on the table name filter -> click on 'Read Tables'
it brings up the _DFVs / views but doesnt show up any tables or synonyms.
Plz help if anyone has resolved this issue.
Thanks
User

Hi,
If you are using DAC for OBIA ,then create olap table structure using dac console,why you trying to import EBS tables directly?
Regards
Naga

MySQL, importing table in OWB

Hi,
when I try to import a MySQL table definition into owb, it looks like OWB (or hsodbc) first gets all the records (select * from table) from the table i'm trying to import. So, with smaller tables I don't notice it, but there is one table with 55 million records. So the hsodbc.exe process starts to consume all the memory and after a while says it is finished importing...but the metadata of the (large) table has not been imported.
I've got a feeling it has got something to do with the odbc driver, but i am not sure.
Anyone with an idea on how to solve this?

Thanks a lot for the tip -- I don't know if the DB2 driver supports them or not but I'll look. There's a tab in the ODBC driver config for specifying custom parameters so it's possible.
Overall I find the ODBC connection works OK, but it's not that great for large data volumes. It's too slow for one thing. It's very convenient to be able to go from Oracle straight to DB2 without having to extract to flat files in between though.

Unable to import tables through ODBC in obiee 11g

Hi all,
In obiee 11g,
OBIEE 11g is successfully installed but when i am trying to import the tables in RPD through odbc then it is giving a problem.
I have tried using the OCI and it is working fine but can anyone tell me why it is not happening through odbc.
created the dSN for it and it is working fine.
any help would be appreciated.
thanks in advance.

Hi,
You need do full installation of obiee11g.
Go through this..May help you.Not getting connected to a data source in obiee 11g
How to install 11g ODBC client drivers to access OBIEE 11g server?
Regards,
Srikanth

Unable to import tables in RPD

Hi i have craeted the ODBC drivers for my oracle11g database however i am not able to import the tables from it. it says "The connection has failed"
Any idea why this error is coming?

hi!!!
so you mean that this is to be updated at the server side.
my installation has database on a remote side and obiee server on my machine
and so i am facing the same problem as you guys did, i.e i wasnt able to import from the database
as per your discussions you guys,
i passed the location of the location of tns file to tns_admin environment variable.
but above there is a mention of updating the alias in tnsnames.ora ie there in
E:\oraclebi\Oracle_BI1\network\admin\sample
what is to be done there?
i hope i m clear with my question, so pls help for the same
thanks in advance
Edited by: piya68 on Nov 24, 2010 12:46 AM

Unable to import table using SOA database adapter in Jdev

hi all,
I am learning soa 11g development by myself which is quite exciting stuff.
I am trying to build a simple flow to access database so I have dropped a database adapter in composite.xml and trying to configure the adapter.
I have successfully tested the database connection within the adapter configuration wizard and can list the tables as well. But when I am selecting a table to import then I don't see any table imported in Step-5.
It doesn't show me any error. I have tried with other tables and also with other databases but can't import the tables.
Any advice will be appreciated.
Oracle SOA Version11.1.1.4.0
JDeveloper Version 11.1.1.6.0
Thanks,
Raj

Hi Raj,
You have to select the required tables and move it to the blank area on right side of your selection window by clicking the arrow button.
cheers

Unable to import table using SOA database adapter in jdeveloper

I am trying to build a simple flow to access database so I have dropped a database adapter in composite.xml and trying to configure the adapter.
I have successfully tested the database connection within the adapter configuration wizard and can view the tables as well.
But when I am selecting a table to import then I don't see any table imported in Step-5.
It doesn't show me any error. I have tried with other tables and also with other databases but can't import the tables
i have selected the table using the right arrow to right side and then clicked "OK". But the table hasn't come-up and it still says "No tables imported" in Step 5. I am trying to import from oracle database using oracle jdbc.
am doing Perform an operation(Select query) on a table
Regards,
Kishor M

Thread moved form Japanese SOA Suite.

Unable to import table from database

Hi,
i am getting error connecting to database through oracle forms
error:the connection has failed
at the same time i can able to connect through sql devloper.suspected driver problem
available driver:odbc3.5,oci11g not working
thanks
chinu

Can you check the network connections ,if every thing is working fine then try to connect mannual from command mode
$sqlplus system/<pwd>@connecting string
Inmeantime send me error code for both import and network issue.
Thanks
satya

Unable to import metadata using OBI 11g Admin tool

Hello folks,
I am new to OBI. I am trying to build a RPD. For that purpose I am trying to import some tables from database but I am unable to. I created DSN and also tried using OCI but no help. The OBI Admin tool client and database is installed under other user's account. Is that the reason I am unable to import tables?
I am getting this error:
Internal Error-Unable to initialize NLS during driver load - When I try to use ODBC &
Connection failed --When I try to use OCI.
Can someone shed some light on this issue.
Thanks,
Edited by: 950330 on Jan 21, 2013 11:17 AM

Use Call Interface: Default (OCI 10g/11g)
Data source Name->hostname:port/ServiceName or TNS name
like
localhost:1521/XE
make sure you able to ping connect the database using tnsentry or
tnsping <tnsname>
from command prompt.
Let me know for issues if helps pls mark
Edited by: Srini VEERAVALLI on Jan 21, 2013 1:17 PM

Is this a bug in OWB 11.2 - importing table metadata for character columns

The Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide provides an overview of the data types supported.
http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm
It says that for VARCHAR2 data type it saws (http://docs.oracle.com/cd/E11882_01/owb.112/e10935/orcl_data_objx.htm#CHDFIADI )
"Stores variable-length character data. How the data is represented internally depends on the database character set. The VARCHAR2 data type takes a required parameter that specifies a maximum size up to 4,000 characters"
That means , I guess, it says that when I import a table, any columns of type VARCHAR2(10) in the database should have its length show as characters in OWB, so a column of type Varchar2(10) in the Oracle database, should be shown as Varchar2(10) when imported into OWB table metadata via the OWB import function.
However, if I have a database that set-up as a single-byte and import a table using the OWB import function a column that has a size of e.g. 10 in the database, is imported as OWB table metadata and the size is 10. Correct, I am happy.
However, if the database is modified to support multi-byte characters, ALTUF16 encoding with the semantics set to "CHAR", then when I import the same table into OWB, OWB reports the size as 40, I guess its 40 bytes as in 10 characters @ 4 bytes per character.
Is this a bug in OWB, as the datatype in the Oracle DB is varchar2(10), should OWB after importing a table not also report the column as VARCHAR2(10) ? Currently, is shows the column as varchar2(40).

I noticed that myself in our project.
Our varchars2 are defined as VARCHAR2(xxx CHAR) - OWB puts the size*4
In fact if you have special characters like umlauts (ü,ä,ö,...) it will use 4 bytes per character.
You can try it yourself. Define a Varchar2(1 CHAR) and manually change the size of the Column in your mapping inside OWB (in filters, joins or your target table).
Then shoot an umlaut through the mapping and will end up with a "too small" error.
Dont mind the size*4 issue - we totally ignored it and run without error since 4 years now.

Import fails with unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 6999

Hi,
I have taken export backup of table from 9.2.0.4 on AIX & trying to import in 11.1.0.7.0 on AIX
while importing im getting the following error.
ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
As the table size is 37G , total free space in tablespace is 40G,
& no index on the table.
following are sum lines from import file
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V09.02.00 via direct path
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing DATAMIG's objects into CUSTOM
. . importing table "CASA_TRAN_HIST_UPLD"
IMP-00058: ORACLE error 1653 encountered
ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
IMP-00028: partial import of previous table rolled back: 62844421 rows rolled back
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT SELECT ON "CASA_TRAN_HIST_UPLD" TO "BSGUSER""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'BSGUSER' does not exist
Import terminated successfully with warnings.
is there any to resolve the issue.
how to change NCHAR set for import.
Thanks

Hello,
which & how i can set character set for import.About the Character Set, it's a setting at the Database creation. You may check it by using the following query on the Source and Target Databases:
select * from v$nls_parameters; The NLS_CHARACTERSET will give you the Character set of the Database.
It cannot be changed easily. It may imply a Database creation and export/import of data ( see Note *225912.1* ).
Else, when you export (with the Original Export/Import utility) it's recommended to set the NLS_LANG parameter.
The NLS_LANG parameter has 3 components:
- Language
- Territory
- Client Character Set
A wrong setting of the NLS_LANG may lead to conversion. However starting with *9i* most data is exported with the Character Set of the Database regardless the NLS_LANG setting. The following note may give you some details about it:
Export/Import and NLS Considerations [ID 15095.1]Hope this help.
Best regards,
Jean-Valentin

Unable to import table in owb 9.2

Similar Messages

Maybe you are looking for