Unable to Import the ID objects in PI 7.0

Hi,
I have installed a new PI 7.0 server which is on local SLD. I also have old PI 7.0 in which all the scenarios are configured.
I am trying to import the scenarios from the old PI 7.0 to new PI 7.0.
Both the servers are on local SLD and on different transport domains.
I tried simple file transfer. I was successful.
But when i am trying to import the ID objects which have got reference to SLD i am getting the error as below.
Import failed because of business system transfer of object Service | ECC_XI: Obligatory transport target for business system ECC_XI not found in System Landscape Directory
Import failed because of business system transfer of
object Service | ECC_XI: Obligatory transport target
for business system ECC_XI not found in System Landscape
Directory (BS_MAPPING_FAILED_OBJ)
Obligatory transport target for business system ECC_XI
not found in System Landscape Directory (BS_TARGET_NOT_FOUND)
Business system P70 is not assigned to a business system
group with the ID (XISystemGroup) (BS_GROUP_LOAD_BY_BS_PROC_EX)
I have also imported the SLD contents related to the scenario.
P70 is the SID of my new PI 7.0 and BWS is the SID of my old PI 7.0.
ECC_XI is the business system which is referenced in the scenario.
Please suggest.
Thanks
Raghu.

Dear all, I've the same error from the first post. If I try to import my XI 3.0 content to PI 7.3 the Integration Builder means:
Receiver Agreement | XY | SYSTEM | ABC : Obligatory transport target for business system SystemP not found in System Landscape Directory
Why this is oblicatory? I've two PI with local SLD in bidirectional sync. There also all business systemes have been created. There are last but not least two groups DEV and PROD. The development systems and the DEV PI is asigned to group DEV and the productional systems and the PROD PI is assigned to group PROD.
Then I've assigned the the PROD Group with transport target to the DEV System and for the business systems I can see the correct mapping. In the DEV systems the transport group and system as targed is assigned. And in the PROD systems I can see the DEV Systems as Source System.
I dont need target systems for PROD systems and I don't have target systems; but why I need now a target system for a productional system by PI import to the IB?

Similar Messages

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

Unable to import the views in RPD.

Hi,
Case1:Unable to import the views in OBIEE 11g by using "Oracle inOraDb 11g_Home1" drivers but able to import the Tables in RPD.
Case 2:Unable to import the Table in OBIEE 11g by using ."Data Direct 6.0 Oracle wire protocol" drivers but able to import the Views in RPD.
My requirement is need to import some views and tables in RPD.How to achive this.kindly let me know.

Hi,
I have tested with SH Schema.
I have one 'View' called profit in sh schema
http://i1159.photobucket.com/albums/p629/bose-obiee/shschema.jpg
The schema in import type without 'Views' Option it is not showing
http://i1159.photobucket.com/albums/p629/bose-obiee/withoutviews.jpg
clicked Back and selected 'Views' Option and checked under sh schema. am able to see the 'Profit Table.
http://i1159.photobucket.com/albums/p629/bose-obiee/withviews.jpg
selected what are all the table i need to import from sh schema with Profit view and clicked the single arrow symbol to move sh schema from 'data source view' to 'repository view' and clicked 'Finish'
It has imported all the tables and view into the rpd from SH Schema.
http://i1159.photobucket.com/albums/p629/bose-obiee/View.jpg
Regards,
Bose

HCI error - unable to import the data because the row is duplicated in the master data

Hi, i am working on HCI while i am mapping the data from ECC to HCI target table i am getting this error :Unable to import the data because the row is duplicated in the master data .Could you please help me how to solve this
Message was edited by: Mariana Mihaylova

Moved to Process Integration (PI) & SOA Middleware as per New SAP HANA Cloud Integration (HCI) content category (unfortunately, I can't edit the discussion and add the category as I'm not a moderator in this space). Perhaps Mariana Mihaylova can help.
Susmitha Yerradhodi please read and follow The SCN Rules of Engagement - in particular, the more details you provide, the better the chances of getting your question answered. (e.g. "HCI" is not a helpful subject)

"System: Unable to find the specified object" on N...

When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.

Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

System: unable to find the specified object.

I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advance

Hi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question..

Error: Unable to import the ZINV_EX(unable to read the segment).

Hi ALL,
i have a requirement. were i have to add a custom segment(Z1_E1EDP01) to standard Invoic02 Idoc and created extension of invoic02(basic type) as ZINV_EX.
i added the segment and populated the values accordingly to the newly created segment.
the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
Unable to import the ZINV_EX(unable to read the segment).
I'm done with the port creation and all the required configuration in idx1 and idx2.
Please can anyone to tell how to resolve this issue.
Thank you,
Lalit.

> the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
> Unable to import the ZINV_EX(unable to read the segment).
You are getting this error because the segment Z1_E1EDP01 is not following certain naming conventions which we require for IDOC. So change the segment name as Z1E1EDP01 and then try. And don't forget to release the segment.

Unable to import Basis (R3) objects to Integration Builder

I am trying to import RFCs and Idocs to the Integration Builder, but am getting the following message.
Unable to establish connection to R/3 system sapdtdb (system=00, client=010) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?
I have checked the radio button on the software component for allowing Import Of RFC and Idoc interfaces.
I have checked on both the PI and the R3 system that the entries in SM59 are correct and that login and connections are permitted.
On our old XI system, I am able to import objects, but on our new PI system I am getting the above error.
Does anyone have any other possible solutions to this please?

Chris,
Please check whether have done all the steps given in this link or not for your new PI system:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
If you done all this you should be able to import the IDocs and RFCs without any problem.
---Satish

Unable to import the excel template into form in HFM

Has any one came across this issue that I am facing now?
I have a form in HFM and I exported the form to Excel and the export works fine. but when I import the excel template into form, it was not successful. I have 250 rows in the template. I deleted 50 rows and tried to import and it worked fine . Is there any row limit on this?
Below here is the error message that I am getting
An error occured. Please contact your administrator
Error Number: - 2147467259
Error Description:007~Unexpected error~The function returned |.
Error SOrce: request Object
Page on which error occured:/hfm/data/processImportWdeffromExcel.asp
I appreciate any ideas on this

What version of HFM and Excel?
Make sure you honor the file extension requirements for 2007 docs and import the same as they are exported.

Unable to import the TPZ files

Hello Experts,
We are upgrading from PI7.0 to PO7.4 system.
Here we have exported some of the specific objects(Mapping objects) from PI7.0 Quality system and trying to import in PO74 Dev system.
While try to import it was giving success, but when I look at the objects they are not available.
Can someone please tell if there is any workaround for the same.
Thanks
VR

Hi,
If the error message points to SAP Note 1682620 - then update SERVERCORE.SCA to Patch Level, which includes the fix attached current SAP Note (1785554). Check SP Patch Level section for details.
This particular fix does not depend on other SCAs.
However, keep in mind that SERVERCORE has dependant Software Component Archives (SCAs):
BASETABLES
ENGINEAPI
J2EE-FRMW

UNABLE TO IMPORT THE IDOC IN XI

hi
We have extended IDOC INVOIC.INVOIC02.ZINVOICO2EX with a custom segment. But when we try importing the same in XI it gives the following error:
+ Error: IDoc type INVOIC02 contains errors (unable to read segments)
We are unable to understand the root cause of the problem and how to fix the same.
Any help is welcome.

Hello,
You could also check the following:
1. Check the IDoc type in transaction WE60 (try to create a parser). I
   prompted, check the segment definition of any erroneous segments in
   transaction WE31.
2. Check whether the user has the necessary authorizations; for more
   information, see the #Importing IDocs and RFCs# in the SAP Help
   section and SAP Note
   #677732 - Authorization for MDI within framework of adaptive RFC.
3. Check whether the necessary function modules are available. See SAP
   Notes:
   #672745 - Missing function modules for mdi and
   #212011 - EDI/IDoc: Access to IDoc metadata.
4. Check whether the RFC function module DD_DOMA_GET is remote-enabled
   See SAP Note:
   #718320 - Problems using mdi to access DDIC types.
5. Check whether any short dumps or errors are written in the source
   system.
Regards,
Sarah

Unable to import the SWCV fom the central sld ?

Hi Guys,
I have connfigured xi for central sld
and when i try to import the swcv from central sld i am getting the message as unable to read the data from the <hostname> : port number
I have given the following in the exchange profile
com.sap.aii.connect.cr.name -- central sld host name
com.sap.aii.connect.directory.name -- sap xi host name
can anybody tell me the values for the above parameters and any help would be really appreciated
LCRSAPRFC and SAPSLDAPI are on the xi server and works fine.
Thanks,
Srini

Hi Sridhar,
LCRSAPRFC - poinitng to SAP XI server Gatewayhost and Gateway service -- works fine
SAPSLDAPI - pointing to SOLMANGR Gatewayhost and Gateway service -- works fine
I am maintaining the Hostname of the solmagr in SLDAPICUST. can you explain little bit more on the url in sldapicust.
Do you mean i need to give http://hostname:port/sld instaed of just the host name ?
Thanks,
Srini

Unable to Delete the Business Objects Installation folder

Hi,
I am trying to re-install the Business Objects 4.1 SP4 on my Dev Machine. I have un-installed BO4.1 by going to Control Panel>programes & Features>uninstall. After i completed the unistall process i have rebooted my machine and still saw the Business Objects folder in the Installation Drive.
I am trying to delete the folder but unable to do it. it reads 'The Action Cant be completed because the folder or file in it is open in another program'. is there any way to get rid of this error and delete the folder to start fresh new installation??

Hi,
To delete the folder you can use rococopy command.
Follow steps
1) Create one dummy folder "xx" on the same level where the already folder exists.let say i want to delete Test folder and folder location is F:/Test and create xx on the same level.
2) Go back one level up like on F:/ drive right click and command prompt.
3) run the command robocopy Test xx /MIR
After that you will be able to delete the folder.
or run one more command to delete the folder from command prompt.
rd/s F:\Test
Regards,
Amit

Unable to import the user certificate into the Oracle Wallet Manager

Hi,
I am configuring the External Authentication plugin using the password filters.
i am using the version 10.1.0.5.0 version of Oracle Wallet manager
inorder to do that i am enabling the SSL mode.
to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
User Certificate Installation failed.
Possible errors:
- Input was not a valid certificate
- No matching certificate request found
- CA certificate needed for certificate chain not found.
Please install it first
can anyone help me how to resolve this problem.

hi,
thanks for your reply pramod
I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
what may be the problem.

OBIEE 11g SSL Configuration Issue : Unable to import the Server certs

Hello All,
We are trying to configure OBIEE 11.1.1.6.0 with SSL using Windows server 2003 (IIS) and facing some issues with that.
Followed the document : OBIEE11g SSL Setup and Configuration [1326781.1]
http://obieedue.blogspot.sg/2012/08/obiee11g-ssl-setup-and-configuration.html
and also completed generating the required certificate signing request and keystores for SSL communication and sent it to the CA (IT Admin team) to to have the certificate signed by CA. The issue comes when I am trying to import the CA certificate (Root certificate) and Server Certificate into the Java Keystore.
I am importing the Root CA Certificate first which is successfully added to the keystore.
keytool -import -trustcacerts -alias mycacert -file cacert.pem -keystore mykeystore.jks -storepass Welcome1
Trust this certificate? [no]: yes
Certificate was added to keystore.
But when trying to add the Server Certificate to the keystore using the command below :
keytool -import -v -alias testserver -file server.cer -keystore mykeystore.jks -keypass Welcome1 -storepass Welcome1
Certificate reply was installed in keystore
I get the following error:
keytool error: java.lang.Exception: Failed to establish chain from reply
java.lang.Exception: Failed to establish chain from reply
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2662)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
Read many forums and tried to convert it to the PKCS#7 format and import the cert to the identity keystore, but was not successful in that either. I have also checked with the IT Admin team and found there is only one RootCA and no other intermediate CA's.
Please advice if any one has similar issues or suggestions.
Thanks in advance,
SVS

Hi,
One obvious reason would be that you did not specify -trustcacerts, and the root CA is not included in the present server keystore. In that case, using the -trustcacerts option would solve the problem, if the root CA is indeed in the JDK cacerts.
To print out the certificates present in the JDK cacerts, use the following command:
keytool -list -keystore <JAVA_HOME>/jre/lib/security/cacerts -storepass changeit -v
Then check if the root CA that signed your server certificate is present, and has not expired (in which case,you would need to re-import a newer one into cacerts).
Another common reason for that error message is when you have used a proprietary CA to sign your server certificate. Then it would obviously not be in the JDK cacerts. The solution in that case is to import your proprietary root CA into the JDK cacerts, using the following command:
keytool -import -keystore <JAVA_HOME>/jre/lib/security/cacerts -file yourRootCA.pem -storepass changeit -alias youralias
A third reason for that error message is when your server was signed by an intermediate certificate. In that case, you would have received from your CA a chain of certificates. One way to solve this (not the only one, but this one works well): Prepend your intermediate CA file to your server cert file, and import the obtained concatenated file into the server keystore. Be careful, the intermediate CA must be BEFORE the server cert. Example:
copy rootca.cer certchain.p7b
type server.cer >> certchain.p7b
The file certchain.p7b will be the concatenation of the intermediate CA and the signed server cert. Then import the newly created file under the key alias as follows:
keytool -import -keystore serverks.jks -file certchain.p7b -alias yourkey -trustcacerts
If you only prepend the intermediate root CA, you must make sure the the final root CA is in cacerts. But you can also prepend your whole chain of trust inside the server keystore.
Regards,
Kal

Unable to Import the ID objects in PI 7.0

Similar Messages

Maybe you are looking for