UNABLE TO IMPORT THE IDOC IN XI

hi
We have extended IDOC INVOIC.INVOIC02.ZINVOICO2EX with a custom segment. But when we try importing the same in XI it gives the following error:
+ Error: IDoc type INVOIC02 contains errors (unable to read segments)
We are unable to understand the root cause of the problem and how to fix the same.
Any help is welcome.

Hello,
You could also check the following:
1. Check the IDoc type in transaction WE60 (try to create a parser). I
   prompted, check the segment definition of any erroneous segments in
   transaction WE31.
2. Check whether the user has the necessary authorizations; for more
   information, see the #Importing IDocs and RFCs# in the SAP Help
   section and SAP Note
   #677732 - Authorization for MDI within framework of adaptive RFC.
3. Check whether the necessary function modules are available. See SAP
   Notes:
   #672745 - Missing function modules for mdi and
   #212011 - EDI/IDoc: Access to IDoc metadata.
4. Check whether the RFC function module DD_DOMA_GET is remote-enabled
   See SAP Note:
   #718320 - Problems using mdi to access DDIC types.
5. Check whether any short dumps or errors are written in the source
   system.
Regards,
Sarah

Similar Messages

Error: Unable to import the ZINV_EX(unable to read the segment).

Hi ALL,
i have a requirement. were i have to add a custom segment(Z1_E1EDP01) to standard Invoic02 Idoc and created extension of invoic02(basic type) as ZINV_EX.
i added the segment and populated the values accordingly to the newly created segment.
the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
Unable to import the ZINV_EX(unable to read the segment).
I'm done with the port creation and all the required configuration in idx1 and idx2.
Please can anyone to tell how to resolve this issue.
Thank you,
Lalit.

> the problem I'm facing is when i try to import this ZINV_EX custom idoc we getting an error :
> Unable to import the ZINV_EX(unable to read the segment).
You are getting this error because the segment Z1_E1EDP01 is not following certain naming conventions which we require for IDOC. So change the segment name as Z1E1EDP01 and then try. And don't forget to release the segment.

Unable to import the views in RPD.

Hi,
Case1:Unable to import the views in OBIEE 11g by using "Oracle inOraDb 11g_Home1" drivers but able to import the Tables in RPD.
Case 2:Unable to import the Table in OBIEE 11g by using ."Data Direct 6.0 Oracle wire protocol" drivers but able to import the Views in RPD.
My requirement is need to import some views and tables in RPD.How to achive this.kindly let me know.

Hi,
I have tested with SH Schema.
I have one 'View' called profit in sh schema
http://i1159.photobucket.com/albums/p629/bose-obiee/shschema.jpg
The schema in import type without 'Views' Option it is not showing
http://i1159.photobucket.com/albums/p629/bose-obiee/withoutviews.jpg
clicked Back and selected 'Views' Option and checked under sh schema. am able to see the 'Profit Table.
http://i1159.photobucket.com/albums/p629/bose-obiee/withviews.jpg
selected what are all the table i need to import from sh schema with Profit view and clicked the single arrow symbol to move sh schema from 'data source view' to 'repository view' and clicked 'Finish'
It has imported all the tables and view into the rpd from SH Schema.
http://i1159.photobucket.com/albums/p629/bose-obiee/View.jpg
Regards,
Bose

How to import the IDOC into Seeburger BIC mapping designer

Hi All,
Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
to Atlas systeam.
Regards,
Ramesh.

Hi Ramesh
BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
Regards
Ramesh

Unable to find the IDOC number in WE02

HI All,
I have executed an outbound program from SM37 and i can see that job got finished in the log.
but when i check the spool, it doesnt contain any list and also i am unable to find the Idoc number in WE02.
I am not clear in this. Please expalin me in detail.

Hi there,
Go to Sales order screen, In the main screen below the command line, one button will be there " Services for object" Click that...... It will open one tool bar.... on that tool bar one icon will be there with thee arrow ..... Click on that,,,,, and here you can see the idoc number....
Thanks,
Raja

HCI error - unable to import the data because the row is duplicated in the master data

Hi, i am working on HCI while i am mapping the data from ECC to HCI target table i am getting this error :Unable to import the data because the row is duplicated in the master data .Could you please help me how to solve this
Message was edited by: Mariana Mihaylova

Moved to Process Integration (PI) & SOA Middleware as per New SAP HANA Cloud Integration (HCI) content category (unfortunately, I can't edit the discussion and add the category as I'm not a moderator in this space). Perhaps Mariana Mihaylova can help.
Susmitha Yerradhodi please read and follow The SCN Rules of Engagement - in particular, the more details you provide, the better the chances of getting your question answered. (e.g. "HCI" is not a helpful subject)

File to IDOC Scenario: where to import the idoc structure?

Dear all,
I have a short organizational question for you all. I have created a scenario where the MDM server places a file in a FTP directory and XI will take it from there for processing to IDOC towards the SAP system.
During design time I need to import the IDOC structure as the inbound interface for the SAP system.
My question in this situation is: do I import the IDOC into the namespace of the MDM (in which I keep the outbound interface and the mappings) server or do I place it in the namespace of the SAP system?
I ask this because in the latter case the IDOC structure will be the only object in the SAP namespace. If I do not do this, I don't have to create this.
What is the right thing to do from an organizational point of view?
Thanks in advance for your input.

Hi Yomesh and Sudheer,
thanks for your answers. To conclude this topic I will demonstrate how I have understood this all by giving you a short overview of how I will proceed now. Could you please comment???
Sender system is a SAP MDM system. For which I will create a SWC called <Company name>_MDM_DEV version 1.0.
For the receiving SAP Enterprise system I will create an additional SWC called <Company name>_SAP_DEV version 1.0.
And thus I do not put any objects under SWCs from the original installed product components.
Then I create a SWC for common objects as IDOCs (to what product does that need to be assigned???)
Then I will put the interface and message types in the corresponding SWCs and put the mappings in the source SWC as our landscape is not that huge.
How's that???
So under which product to create the SWC for common objects is my final question...
I will provide points to you both.
Cheers,
Auke
Message was edited by:
A. Schotanus

Error while importing the IDOC

Hi,
When I am Trying to import the Idoc the following error is dispalyed.
Pl go through it and reply me asap.
"**Ready for import**
Import started...
HRMD_A.HRMD_A06:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: Documentation DE.OBJEKTID | urn:sap-com:document:sap:docu is already locked in another change list by user gopaln
Import failed with 1 error"
Thanks,
Srini

HRMD_A.HRMD_A06:
+ com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: Documentation DE.OBJEKTID | <b>urn:sap-com:document:sap:docu is already locked in another change list by user gopaln</b>
>>> another user is already editing the onject... you will have to ask him to activate his changes. Also make sure the Idoc is released.

Unable to import the SWCV fom the central sld ?

Hi Guys,
I have connfigured xi for central sld
and when i try to import the swcv from central sld i am getting the message as unable to read the data from the <hostname> : port number
I have given the following in the exchange profile
com.sap.aii.connect.cr.name -- central sld host name
com.sap.aii.connect.directory.name -- sap xi host name
can anybody tell me the values for the above parameters and any help would be really appreciated
LCRSAPRFC and SAPSLDAPI are on the xi server and works fine.
Thanks,
Srini

Hi Sridhar,
LCRSAPRFC - poinitng to SAP XI server Gatewayhost and Gateway service -- works fine
SAPSLDAPI - pointing to SOLMANGR Gatewayhost and Gateway service -- works fine
I am maintaining the Hostname of the solmagr in SLDAPICUST. can you explain little bit more on the url in sldapicust.
Do you mean i need to give http://hostname:port/sld instaed of just the host name ?
Thanks,
Srini

Unable to import the user certificate into the Oracle Wallet Manager

Hi,
I am configuring the External Authentication plugin using the password filters.
i am using the version 10.1.0.5.0 version of Oracle Wallet manager
inorder to do that i am enabling the SSL mode.
to enable the SSL mode i followed the some steps in OWM and OCA admin and user console.
when i approved a certificate as admin and importing to the Oracle Wallet Manager, i got an error that
User Certificate Installation failed.
Possible errors:
- Input was not a valid certificate
- No matching certificate request found
- CA certificate needed for certificate chain not found.
Please install it first
can anyone help me how to resolve this problem.

hi,
thanks for your reply pramod
I tried to import the two certificate files(rootca.crt and server.crt). but i am got the same error.
what may be the problem.

Unable to import the excel template into form in HFM

Has any one came across this issue that I am facing now?
I have a form in HFM and I exported the form to Excel and the export works fine. but when I import the excel template into form, it was not successful. I have 250 rows in the template. I deleted 50 rows and tried to import and it worked fine . Is there any row limit on this?
Below here is the error message that I am getting
An error occured. Please contact your administrator
Error Number: - 2147467259
Error Description:007~Unexpected error~The function returned |.
Error SOrce: request Object
Page on which error occured:/hfm/data/processImportWdeffromExcel.asp
I appreciate any ideas on this

What version of HFM and Excel?
Make sure you honor the file extension requirements for 2007 docs and import the same as they are exported.

OBIEE 11g SSL Configuration Issue : Unable to import the Server certs

Hello All,
We are trying to configure OBIEE 11.1.1.6.0 with SSL using Windows server 2003 (IIS) and facing some issues with that.
Followed the document : OBIEE11g SSL Setup and Configuration [1326781.1]
http://obieedue.blogspot.sg/2012/08/obiee11g-ssl-setup-and-configuration.html
and also completed generating the required certificate signing request and keystores for SSL communication and sent it to the CA (IT Admin team) to to have the certificate signed by CA. The issue comes when I am trying to import the CA certificate (Root certificate) and Server Certificate into the Java Keystore.
I am importing the Root CA Certificate first which is successfully added to the keystore.
keytool -import -trustcacerts -alias mycacert -file cacert.pem -keystore mykeystore.jks -storepass Welcome1
Trust this certificate? [no]: yes
Certificate was added to keystore.
But when trying to add the Server Certificate to the keystore using the command below :
keytool -import -v -alias testserver -file server.cer -keystore mykeystore.jks -keypass Welcome1 -storepass Welcome1
Certificate reply was installed in keystore
I get the following error:
keytool error: java.lang.Exception: Failed to establish chain from reply
java.lang.Exception: Failed to establish chain from reply
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2662)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
Read many forums and tried to convert it to the PKCS#7 format and import the cert to the identity keystore, but was not successful in that either. I have also checked with the IT Admin team and found there is only one RootCA and no other intermediate CA's.
Please advice if any one has similar issues or suggestions.
Thanks in advance,
SVS

Hi,
One obvious reason would be that you did not specify -trustcacerts, and the root CA is not included in the present server keystore. In that case, using the -trustcacerts option would solve the problem, if the root CA is indeed in the JDK cacerts.
To print out the certificates present in the JDK cacerts, use the following command:
keytool -list -keystore <JAVA_HOME>/jre/lib/security/cacerts -storepass changeit -v
Then check if the root CA that signed your server certificate is present, and has not expired (in which case,you would need to re-import a newer one into cacerts).
Another common reason for that error message is when you have used a proprietary CA to sign your server certificate. Then it would obviously not be in the JDK cacerts. The solution in that case is to import your proprietary root CA into the JDK cacerts, using the following command:
keytool -import -keystore <JAVA_HOME>/jre/lib/security/cacerts -file yourRootCA.pem -storepass changeit -alias youralias
A third reason for that error message is when your server was signed by an intermediate certificate. In that case, you would have received from your CA a chain of certificates. One way to solve this (not the only one, but this one works well): Prepend your intermediate CA file to your server cert file, and import the obtained concatenated file into the server keystore. Be careful, the intermediate CA must be BEFORE the server cert. Example:
copy rootca.cer certchain.p7b
type server.cer >> certchain.p7b
The file certchain.p7b will be the concatenation of the intermediate CA and the signed server cert. Then import the newly created file under the key alias as follows:
keytool -import -keystore serverks.jks -file certchain.p7b -alias yourkey -trustcacerts
If you only prepend the intermediate root CA, you must make sure the the final root CA is in cacerts. But you can also prepend your whole chain of trust inside the server keystore.
Regards,
Kal

Unable to Import the ID objects in PI 7.0

Hi,
I have installed a new PI 7.0 server which is on local SLD. I also have old PI 7.0 in which all the scenarios are configured.
I am trying to import the scenarios from the old PI 7.0 to new PI 7.0.
Both the servers are on local SLD and on different transport domains.
I tried simple file transfer. I was successful.
But when i am trying to import the ID objects which have got reference to SLD i am getting the error as below.
Import failed because of business system transfer of object Service | ECC_XI: Obligatory transport target for business system ECC_XI not found in System Landscape Directory
Import failed because of business system transfer of
object Service | ECC_XI: Obligatory transport target
for business system ECC_XI not found in System Landscape
Directory (BS_MAPPING_FAILED_OBJ)
Obligatory transport target for business system ECC_XI
not found in System Landscape Directory (BS_TARGET_NOT_FOUND)
Business system P70 is not assigned to a business system
group with the ID (XISystemGroup) (BS_GROUP_LOAD_BY_BS_PROC_EX)
I have also imported the SLD contents related to the scenario.
P70 is the SID of my new PI 7.0 and BWS is the SID of my old PI 7.0.
ECC_XI is the business system which is referenced in the scenario.
Please suggest.
Thanks
Raghu.

Dear all, I've the same error from the first post. If I try to import my XI 3.0 content to PI 7.3 the Integration Builder means:
Receiver Agreement | XY | SYSTEM | ABC : Obligatory transport target for business system SystemP not found in System Landscape Directory
Why this is oblicatory? I've two PI with local SLD in bidirectional sync. There also all business systemes have been created. There are last but not least two groups DEV and PROD. The development systems and the DEV PI is asigned to group DEV and the productional systems and the PROD PI is assigned to group PROD.
Then I've assigned the the PROD Group with transport target to the DEV System and for the business systems I can see the correct mapping. In the DEV systems the transport group and system as targed is assigned. And in the PROD systems I can see the DEV Systems as Source System.
I dont need target systems for PROD systems and I don't have target systems; but why I need now a target system for a productional system by PI import to the IB?

During SAP outages,XI unable to send the IDoc to SAP System.

Hi
We have an interface in XI which posts IDoc to SAP .
In the inbound side XI polls the database and executes a query.
But during SAP outages ( Planned/unplanned) though XI executes SQL and process the messages successfully the message fails in the outbound side as SAP is not available.( Column 'c' will be marked with red flag)
Is there any way we can queue up the messages till SAP is available and post the IDocs.
Presently we have to either resend the message from the source system or using
Run time workbench and payload post the IDoc manually.
I guess there could be some settings in the J2EE stack if done can help with.
My environment is XI 3.0 SP14.
Please suggest a feasible solutions.
Thanks in advance,
KP

Hi,
if the quality of service is EO then your idoc is stuck in sm58 and you can force the idoc to be delivered once SAP will come back available.
You can schedule the report RSARFCEX that does exactly this task.
Normally this job is scheduled to run every 5 minutes.
This should solve your problem.
Btw, I suggest you to additionally have a look at this blog <a href="/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically">XI : How to Re-Process failed XI Messages Automatically</a>.
Best Regards,
Sergio

Unable to import the slide from powerpoint 2007

I am beginner in captivate 3 and I am using student version.
So please help me with the answer for the following problem
I cannot import the slide from powerpoint slide version 2007.
Captivate 3 is not supporting to import the slide from 2007 version
. Please help
With thnaks
Polachan

Polachan, just open the Power Point presentation in your copy
of "MS Powerpoint 2007" and use the "Save As" function to save a
copy in "Powerpoint 1997-2003" format.
Then, bring
that copy into Captivate 3, and you should be okay. Okay?

UNABLE TO IMPORT THE IDOC IN XI

Similar Messages

Maybe you are looking for