Unable to import the License file
Dear Experts,
I am facing a very critical issue,
I have a new server and i have installed the basic pack of SAP 2005B PL 05.
Now i have requested a license key and tried to import it.It throws me an error stating "unable to verify digital signature for license file".
I have referred the SAP Note and tried out few suggestions but it did'nt help me.
Am i missing anything here, pls advice. Issue is very critical.
Thanks
Deepak
Hi!
SAP License is not support for older version of SAP. You need to install SAP B1 2007B PL 10 or above version.
Similar Messages
-
Unable to import the TPZ files
Hello Experts,
We are upgrading from PI7.0 to PO7.4 system.
Here we have exported some of the specific objects(Mapping objects) from PI7.0 Quality system and trying to import in PO74 Dev system.
While try to import it was giving success, but when I look at the objects they are not available.
Can someone please tell if there is any workaround for the same.
Thanks
VRHi,
If the error message points to SAP Note 1682620 - then update SERVERCORE.SCA to Patch Level, which includes the fix attached current SAP Note (1785554). Check SP Patch Level section for details.
This particular fix does not depend on other SCAs.
However, keep in mind that SERVERCORE has dependant Software Component Archives (SCAs):
BASETABLES
ENGINEAPI
J2EE-FRMW -
Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz -
My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
I was in the midst of a Firefox session w/two windows open. Nothing special about the sites. No fancy javascripts or anything. When I closed the second window and opened the "History, Show all History" pull-down, the Library screen had no data in it.
I looked for the Bookmarks.html file in my profile and it is missing. I tried renaming an old .bak file from a couple years ago and I can open it as a file and see the text of it displayed but Firefox will not recognize it as and open it as the Backups file.
Following the directions already posted - using "History, Show all History" then the "Import and Backup, Restore" process - allows Firefox to see all the backups, but trying to restore from any of them yields the "Unable to process the backup file" error message.
I have re-started my machine from a cold start - twice now.The file that stores bookmarks is probably damaged, for details on how to fix that see http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox
-
Error message: "Unable to prepare the selected file for editing"
There is another similar post. <br /><br />I have imported a bunch of Nikon NEF raw files into Lightroom. I can work them without any problem, but when I right-click the image to edit it further in Photoshop CS3. I get this message:<br /><br />i "Lightroom was unable to prepare the selected file <filename.NEF> for editing. It will not be opened."<br /><br />Photoshop has no trouble opening these NEF files by itself, but Lightroom can't hand it them off. Anyone know why this is? Nothing I can find in the help file or elsewhere here.<br /><br />Stan
Sean, if they are off-line, would any of this Xmp stuff make any difference? Don't they need to be brought On-lie to edit? And where would the Xmp's go with them off-line?
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/ -
Unable to see the uploaded file using gos object
Hi Experts,
I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
Code to upload the file.
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment TYPE swo_typeid.
DATA: lo_gos_service TYPE REF TO cl_gos_document_service.
obj-objkey = req_num.
obj-objtype = objtype.
CREATE OBJECT lo_gos_service.
CALL METHOD lo_gos_service->create_attachment
EXPORTING
is_object = obj
IMPORTING
ep_attachment = l_attachment.
I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment TYPE swo_typeid.
DATA: lo_gos_service TYPE REF TO cl_gos_document_service.
obj-objtype = objtype.
obj-objkey = req_num.
CREATE OBJECT manager
EXPORTING
is_object = obj
EXCEPTIONS
OTHERS = 1.
Please help me out how to view the file and list.
thanks & regards
T.Tamodarane
Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
Edited by: T.Tamodarane on Oct 23, 2009 9:56 AMHi,
Please post ur thred below:
PL/SQL
Regards
Meher Irk -
Renderfarm error: Pre-Flight Error: Unable to import previously rendered file
I have an error message I am receiving during network rendering on a renderfarm, and was hoping for some help. The error is this: "Pre-Flight Error: Unable to import previously rendered file."
Here is my setup and some details:
The user makes a comp, and adds it to the render queue set to render as a quicktime movie file. Then they run a script which precomps everything and sets it to render as a image sequence with "Skip existing files" checked. This comp also has a post-render action set to import & replace usage. After this comp is rendered, it gets pulled back into the project and the original render item starts rendering the movie file using the previously rendered image sequence as it's only layer.
This project gets saved to a server where our render nodes are watching the folder. All the render nodes pick up the project and proceed to render the image sequence. Then, after they are done, 1 machine will pick up the second render item and begin rendering the image sequence into the final quicktime movie.
All of this goes smoothly about 90% of the time. However, in some cases an error shows up in the watch folder html page for the 2nd render item (the one converting the image sequence to the movie). The error says "Pre-Flight Error: Unable to import previously rendered file." After the error occurs, no machines will start rendering the project.
My first guess is that the render engine on one machine somehow skips rendering the image sequence comp, and then tries to render the quicktime movie comp and fails because the image sequence has not yet been rendered. However, I can't figure out why After Effects would skip rendering the first comp.
Does anyone have any idea?
Thanks for the help, and let me know if you have any more questions about the setup,
AdamWell, you should get used to the fact that it's simply gone... Just looking at your screenshot makes me grind my teeth. From delayed writing of files to fragmentation in user folders to Windows doing obscure things this could be anything, but seriously, saving important files on the desktop? That is simply sloppy data management. There is no other way to say it. Read up on what proper file naming, incremental saving and backups are good for and why keeping work files separate and away from your user home directories is actually a quite simple, yet effective concept to avoid exactly that kind of issue.
Mylenium -
When I try to restore my bookmarks I get the message "Unable to process the backup file."
I lost my bookmarks and when I try to restore them I can see the backup files in the restore window but when I try to restore my bookmarks I get the message "Unable to process the backup file." Can you assist? Thanks
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
After the above. Restart Firefox. Then try again.
If you still can't restore one of the files, try another one.
These can't get your data back, but will help in the future.
These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences -
Unable to import certain image files in CS5
I currently am using CS5, and I am unable to import certain image files such as .png and.tga. When I try to import them I get an error message saying something along the lines of file type not supported. Any help?
Make sure that the images are not CMYK color space.
Already tried that, thanks
One thing to take note of is everytime I start AE I get a pop up box saying "You have at least one output module template that refers to a missing plug-in. Please check your Output Module Template". That plug-in would be the TIIFF alpha sequence output. Perhaps that has something to do with it.. -
Unable to import DWG CAD files to WCS
Hi all,
I am trying to import a DWG CAD file to my WCS 4.2.62.0 for a floor area. Everything I read says I can import DWG CAD files (as well as gif, jpeg, and png) for Floor Areas but I am unable to do so. I get the following error message:
The image file is invalid. GIF, JPEG, and PNG files are acceptable image types for campuses and outdoor areas. DXF and DWG CAD files are acceptable in addition to GIF, JPEG, and PNG for Floor Areas.
Any ideas on why I am unable to import a DWG file as a floor area?
Thanks in advance.Hi MH, thanks for your response. Here are some links to the literature I was referring to.
This is the WCS Configuration Guide, release 4.2:
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00808e525f.html#wp1125793
This is the WCS Release Notes for WCS version 4.2.62.0. It appears that support for AutoCAD files is a new feature in this release:
http://www.cisco.com/en/US/docs/wireless/wcs/release/notes/WCSRN4_2.html#wp44484
I hope those links work ok for you. I'll have to take a look at this Trapeze/Nortel 'RingMaster' (it is a great name).
Thanks,
BA -
Getting error while trying to import the eex files
I am facing few problem while importing..
here is the error message from log
Processing files for US language ...
Searching D:/sachin/Discoverer/AU_TOP/discover/US directory for files to import ...
Number of files to process for US language : 2648
adupdeul.sh: line 766: perl: command not found
ERROR : adupdeul_ald2 is unable to determine character set encoding
for D:/sachin/Discoverer/AU_TOP/discover/US/abmactaccdaseflo.eex file.
adupdeul_ald2 is exiting with status 1
I checked the code in adupdeul.sh
here is the code which errored out
firstspace=" "
cset=`head -10 $topdir/$lang/$fname | \
perl -e 'while(<>){' \
-e ' if (/^<\?xml.*\sencoding=\"(.+)"/){ ' \
-e ' print uc "$1\n";' \
-e ' }' \
-e '}' `
if test "$cset" = ""; then
echo "ERROR : $program is unable to determine character set encoding"
echo " for $topdir/$lang/$fname file."
exit 1
else
echo "$cset" >> $tmpcsetfile
fi
First 10 lines from D:/sachin/Discoverer/AU_TOP/discover/US/abmactaccdaseflo.eex file
<?xml version="1.0" encoding="ISO-8859-1"?>
<EndUserLayerExport SourceEULId="20001214113219" SourceEULVersion="4.1.44.00.00" MinimumCodeVersion="4.1.0" ExportFileVersion="4.1.0">
<ExternalElement>
<APPS Header="$Header: abmactaccdaseflo.eex 115.7 2003/02/19 18:11:04 pkm ship $"> </APPS>
</ExternalElement>
<ExternalElement>
<OraTranslatability>
<XlatElement Name="BusinessArea">
<XlatID>
<Key>DeveloperKey</Key>
I think this code should work...
Please help me :-(
- SachinHi,
I'm following the note 139516.1 on metalink to use Discoverer 4i with E-Business Suite 11.5.10.2.
Everything goes well until I try to import the eex files (downloaded to my Windows XP desktop). Here is what I get:
You are running adupdeul, version 115.11
Start of adupdeul session
Date/time is Fri Jul 27 10:15:16 WEST 2007
Log file is adupdeul.log
Command line arguments are
"connect=apps/apps@CESEBTST"
"resp=System Administrator"
"gwyuid=APPLSYSPUB/PUB"
"fndnam=APPS"
"secgroup=standard"
"topdir=/cygdrive/c/oracle/Disco4i/Discover/discover"
"language=US"
"eulprefix=EUL"
"eultype=OLTP"
"mode=complete"
Processing files for US language ...
Searching /cygdrive/c/oracle/Disco4i/Discover/discover/US directory for files to import ...
Number of files to process for US language : 2648
Determining the character set for the import session ...
The following encoding schemes have been found
ISO-8859-1
UTF-8
ERROR : adupdeul does not support importing files with
multiple encodings.
adupdeul is exiting with status 1
End of adupdeul session
Date/time is Fri Jul 27 10:20:20 WEST 2007
Could someone explain me this multiple encodings error and tell me how to avoid it?
Thanks in advance! -
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"
It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.
-
I have searched the internet and this forum and have not found an answer...
I am trying to install the AdventureWorks database into my single instance of MS SQL Server Express 2005. I am logged into my machine as an administrator and logged into SQL Server 2005 express 'sa'. I attempt to run the following script:
exec sp_attach_db @dbname = N'AdventureWorks',
@filename1 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf',
@filename2 = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_log.ldf'
The error message I get back is:
Msg 5120, Level 16, State 101, Line 1
Unable to open the physical file "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf". Operating system error 5: "5(Access is denied.)".
The folder "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data" and all the files in it are read-write. I am 100.0000% certain the files "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Data.mdf" and "C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\AdventureWorks_Log.ldf" exist! They are the result of running the installation program AdventureWorksDB.msi, which I downloaded from: http://www.codeplex.com/MSFTDBProdSamples/Release/ProjectReleases.aspx?ReleaseId=4004.
What do I have to do to install the AdventureWorkds database????Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day -
Unable to open the downloaded file
Unable to open the downloaded file:
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.1.0 -> for Windows x86 -> File2
http://www.oracle.com/technetwork/middleware/performance-management/downloads/hyperion-foundation-1112-086772.html
Error message -
Cannot open file: it does not appear to be a valid archive. If you download this file, try downloading the file again.
Tried many a times and used various unzipping tool.do not pause the download in the middle of the download.
with some download software, you can pause/stop the download in middle and continue.it will corrupt the software.
else in middle the due to network... it may corrupt.
check/compare the size with the original bytes mentioned in the oracle software download index size matches your downloaded file size.
try to download it again.
Good Luck.
Maybe you are looking for
-
i have a virus - or something where someone is getting into my mail and sending out spam email to everyone on my mail list - people who i hardly even know. how do i get this to stop? thanks.
-
How to save formatted text in Transparent or cluster table using WDA
Hi All, From WDA application I want to save formatted text in Transparent or cluster table. What Datatypes/Data elements should take in Tables? Format should remain as it is. How can I achieve above requirement. Please guide step by step. Thanks in a
-
LMS 3.2 Not able to see devices in cs device management
Not able to see devices in CS device management (0 devices).but devices are visible in other modules like RME and DFM. can anybody help.. Thanks in advance... Regards, Channa
-
I can't get the hang of managing photos on the iPad. I have 2,000 photos and the only choice I see is to delete all of them or keep them? What is the best way of managing the photos?
-
Virtual WLC supported Access Points
Dear All, I read minimum code version of AP should be 7.3. Someone please tell me the supported AP models for VWLC 7.4 series..? KVS