Unable to insert micro sim card
The pin pushes in but the micro sim tray doesn't pop out. Any other way of inserting the micro sim card?
I have the wifi-only iPad so I can't talk from experience, but there are instructions for ejecting the sim tray on this page : http://support.apple.com/kb/HT4577
Similar Messages
-
Hello, just got a new mini I pad, unable to open the tab to insert the sim card, pls help. thanks!
Okay I just updated the Graphics driver like it suggested in my system details part. No change.
-
IPad has a feature or insert the SIM card and use it as normal phone?
I tried to insert the SIM card into the drip tray iPad but was too small. iPad has a feature that is inserted into the SIM card and the normal operation of the phone?
The only way to use an iPad as a phone is via one of the Voice-Over-IP services such as Skype.
As to your SIM issue, the iPad requires a micro-SIM, and you apparently tried to use a standard SIM. But such SIMs get you access to data services only; as pjl123 said, the iPad has no phone capability built in.
Regards. -
HT201299 HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...
HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...
My Ipad doesnt have the space to pin out the sim card tray...?
I think i have been gifted the Ipad which doesnt support sim card. Is it so?
My model no is- A1416....? -
My ipad does not find my micro sim card? Whats wrong?
my ipad does not find my micro sim card. Whats wrong
Where did you get the phone? If it was hacked or jailbroken prior to the update, this is pretty typical. If that's the case, it's now a brick.
-
I have an old iPhone 3S, that was used with Bell. My friend lost her phone and I lend her this one, which she unlock to use with Rogers. I got it back and want to use as an iPod not the phone, but when I connected to iTunes I am getting this message: "There is no SIM card installed in the iPhone you are attempting to activate. Please diconnect and insert a SIM card".
I went to Bell and Rogers where we tried inserting active cards but message never changed.
On the phone itself I am able to get wifi but finish with "Your phone could not be activated because the activation server is temporary anavailable."
I run diagnostic from iTunes:everything is working properly, only message out of normal is "iTunes is not running in safe mode"
How can I sinc this phone with iTunes, so I can use it to lisen to music?
Any help will be apriacietedI can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.
do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?
-
How do I get an iPad micro sim card for Austria and Italy? We purchased one for Germany, but it doesn't cover in Austria or Italy
Compare the roaming charges from the German carrier with services like those:
http://www.abroadband.com
http://www.maxroam.com/Shop/Product/Detail.aspx?ProductId=787&cur=EUR
Otherwise buy a pre-paid micro-SIM card for the iPad in each country you visit. -
my iphon 5 said "only compatible sim cards from a supported carrier may be used to activate iphone. please insert the sim card that came with ur phone or visit a supported carrier's store to receive a replacement sim card" what do i do??? i leave in diferent country now!!!???(((
in many countries to make phones seem less expensive
carriers pay most of the phones price for the customer
but this come at the cost of the phone only being able to work
with the carrier this is called a sim lock
the only people who can remove a sim lock is the carrier which
the phone is sim locked to they been doing it like that for at least 20 years -
I have a Samsung SIII and will be traveling out of the country. Do I need to get a micro SIM card instaslled for international ? I was told Verizon has them free for customers but that it needs to be "sert up". Also, are there alternatives to going through the verizon data plan (which is very expensive.
ThanksYour phone already has a micro SIM card in the device so it can connect to the VZW network. You will need an international plan from VZW if you intend to use that SIM card. Otherwise you can get a new SIM card from the local carrier and setup the phone for global use with a separate APN with that carrier's specific information.
-
Can i insert a sim card in the Ipad model A1395
CAN I INSERT A SIM CARD IN THE IPAD MODEL A 1395
No it is the Wi-Fi only model...
http://www.everymac.com/systems/apple/ipad/specs/apple-ipad-2-wi-fi-specs.html -
i got an iphone. when ive insert my sim card in it, it sat sim not valid. at the end its mentioned please contact apple support. can you help me?
Your phone is probably carrier locked and you are using a SIM form a different carrier. Are you?
-
Dear ,
I buied I phone from USA and I sent to Iraq to use it there but when used it I get this message :
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier
so I need support to resolve this problem and procedure and how I can iPhone be unlocked.
BR,
Ammar Jumaaammarjr wrote:
... how I can iPhone be unlocked.
Sorry... but... ONLY the US Carrier it is Locked to can unlock it.
You need to Contact them.
Note: No one here will know who that Carrier is. -
My iPhone5 prompts while setting up "This iPhone is not currently setup to work with carrier you are attempting to use.Please insert another SIM card from a supported carrier" or "Request that this iPhone be unlocked" How can I unlock my new iPhone5 to function properly?
That means that the phone is locked to a carrier other than the one you are trying to use.
ONLY the carrier it is locked to can authorize unlocking it.
Where exactly did you get this "new" iPhone 5? -
if I buy a new wifi and cellular ipad with ATT can I swap the micro sim card to other overseas carriers when traveling?
Ralph
he is talking iPad
iPads are not Carrier locked and as long as you are happy with a 3G signal
you can buy a PAYG data sim in many countries
see LTE limitations here
http://www.apple.com/ipad/LTE/
Buy from Apple Store and you can guarantee no issues
Maybe you are looking for
-
WLS 10.3.x setup in Data Guard environment
Hi all, We are setting up the following environment: Oracle Database 11.2.0.2 EE RAC primary and physical standby WebLogic Server (WLS) 10.3.0 We are using MultiDataSource (MDS) per the documentation which is fine. However, this setup requires the da
-
What are all the E-Modules available in SAP HR
Hi Please let me know what are all the e-modules (e-recruitment, e-travel....) available in SAP HR Thanks Manian
-
Error when creating table (Document contains no data)
Hi, I've installed htmldb 2.0 and after playing with it for a while, everything seems to be ok, except for table creation. No matter I use the sql command console or the object creation wizard, the situation is the same: i can arrive until the last c
-
Is it possible to create a VTI tunnel from my 877 router to my ASA
Hi all I woulke like to know is it possible to create a VTI tunnel from my 877 router to my ASA, rather than creating a cryptomap on the router ? cheers Carl
-
Bad installer with LV 8.2.1 application builder
Hi, I updated LV to 8.2.1 with the update available online. Now I need to build a new installer because the exe will need LV 8.2.1 RT (at least it does not work on a pc with 8.2 installed). The build process runs fine so far, but when I try to use th