Unable to Insert PDF to Powerpoint 2010 getting error

Hi,
I am getting this error "The server application, source file, or item can't be found, or returned an unknown error.
You may need to reinstall the server application" when I am trying to insert an PDF file into Powerpoint slide I am using this method to insert the pdf file => from INSERT menu=>OBJECT=>Create from file. I have unchecked the protected mode at
start up from security settings of adobe reader (I am using ver 11.0.0.9) and other suggested troubleshooting but no luck so far please help me out of this problem.
I have done the following troubleshooting so far with no luck,as the problem persist:-
1)Reinstall the Adobe reader 11.0.0.9
2)repair the office 2010 64 bit
3)removed the Adobe reader 11.0.0.9 ver and tried the same for ver 9 and ver 10
4) unchecked the protected mode at start up from security settings of adobe reader
5)Clean boot method is also of no use as I tried it also.
Microsoft really needs to take note of it as it seems to be a bug in 64 bit office

Hi Swapnil,
It's a common issue when you try to embed an object in your presentation. In most cases, the reason is because Adobe Reader X has a new Protected mode, and usually, disable that protected mode will fix the issue.
For your case, I'd suggest you try to re-register the Component Object Model provider,
OLE32.dll and see if it helps:
Just type: regsvr32 %systemroot%\system32\ole32.dll in the CMD window, and then press
Enter. Click OK.
Hope it helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Unable to combine files on acrobat 8 getting error message "no PDF file was created beacuse Acrobat encountered an unidentified error"

unable to combine files on acrobat 8 getting error message "no PDF file was created beacuse Acrobat encountered an unidentified error" Please help

A lot of the time the files can not be combined because of incompatible fonts, or at least font sets that could not be resolved. Maybe that will give you some direction to look at.

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working"

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help. I get the same message. What to do?

Can you open Reader by itself? If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

I am unable to sync my ipad..i get error message " required file cannot be found" can someone help?

I am unable to sync my ipad..i get error message " required file cannot be found" Can you help me?

Some things to try in this order:
1) Make sure you designated the correct folders for music, etc.
2) Press and Hold the Home and Power buttons on the iPad until the Apple Logo appears, about 10 seconds.
3) Make sure all antivirus and firewalls are off.
4) Delete and reinstall itunes. (Back up the itunes folder first.)
Hope this helps...

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month

Unable to email a document. Keep getting error message: Invalid Date Enter 2-digit month
Does not happen with all forms which emante from same USG webpage
Any adivice?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

Unable to publish in Swf format. Get error message: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank

Unable to install itunes on XP. Get Error 7

Unable to install itunes on XP. Get Error 7

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Unable to insert pdf object into 64-bit Word 2010

I have always been able to insert pdf files into word documents. However, when I upgraded to the 64-bit version of Word, I started experiencing the below issue.
My setup is: Windows 7 64-bit, Word 2010 64-bit, Adobe Acrobat 9 Pro v9.4.7.
When I attempt to insert a pdf file into Word, I receive the following message:
"The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed."
I have researched this issue a great deal.
Previously, I found a posting which specified some registry keys to delete. I followed these directions and it worked. But, after installing some updates, the issue is back and I am unable to find the post specifying the registry keys to remove.
Any help will be greatly appreciated.
Thanks!
Brandon

Solution:
Open Adobe Reader / Pro
Go to Edit àPreferenceà General (LHS)àUncheck “Enable protected mode at startup”.
Adobe Reader’s protected mode will be disabled
Now try inserting Adobe document in Word, it will work.

Unable to insert pdf object into ppt or word

I am unable to insert a pdf object into Word or Powerpoint. I have Adobe Reader 9.3 and Windows 7 MS Office 2010 64 bit. Previously, I was able to perform this task without issue with the same software.
For word, I get:
"The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. The edit this object install AcroExch or ensure that any dialog boxes in AcroExch are closed".
For Powerpoint, I get:
"The server application, source file, or item can't be found, or returned an unknown error. You mayneed to reinstall the server application."
Was an update sent out that may have caused the issue?
Or is there a solution to resolve the issue? The ony solution I have sound is Disabling Protect Mode which does not apply to this version of Reader.
Any help would be greately appreciated. Thank you.

There is another thread on this and seems to be an ongoing issue with neither Microsoft nor Adobe owning up to it. What I did to work-around the issue is create a .zip file of the .pdf file which can then be put into the workd doc as an object file icon. Worked for me. Not the best solution but this has been ongoing since 2011, and this worked.

Unable to insert PDF object into Word 2013

Hi,
While trying to insert PDF (Adobe Reader X 10.1.0) document into Word
(Microsoft office Professional plus 2013 15.0.4420.1017) getting below error.
Error Message: The Program used to create this object is
Acroexch.That program is either not installed on your computer or it is not
responding, to edit this object , install AcroExch to ensure that any dialog
boxes in Acroexch are closed
Also i tried mentioned steps:
Step1: Open Adobe Reader and goto Edit ==> References (ctrl+k).
Step2: In General uncheck the Enable protected mode at startup.
But still getting the same error.
Any suggestion Please!!!!!!!
Thanks in advance.

gkrish wrote:
(Adobe Reader X 10.1.0)
I would try to install a newer Reader version; either 10.1.10 or 11.0.07.

T420 hanging when inserting audio in powerpoint 2010

When inserting any audio clip on a T420 Thinkpad in Powerpoint 2010 , the computer will take a long time to insert the file. This same process on a T420s it does the same, and if I do the same process on a Lenovo Thinkpad X200 it takes five seconds. Any Ideas

Hi johnbrae
I encountered some problems with Microsoft Office 2010 before, even uninstall and reinstalling it does not work. It could be caused by misconfigurations in Windows, etc. I have some of the functions not workable or crash in Word, PowerPoint and Excel.
This works for my case, maybe you could try:
(Windows 7)
Go to Control Panel, Internet Options, under Browser Settings, click Settings.
Check whether the Current Location is correct: (# is your OS drives) ("" is your username)
#:\Users\""\AppData\Local\Microsoft\Windows\Temporary Internet Files\Temporary Internet Files.
I am unsure, from what I test out, some program would not work properly if the Temporary Internet Files location is changed.
Cheers
Peter
ThinkPad: W520 (4284-A99)
=============================================
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve
Mark it as solved if the solution works for you, so it could be reference for others in the future
Dolby Home Theater v4 (Essential/IdeaPad/ThinkPad)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Insert SWF into PowerPoint 2010?

When I wanted to insert a SWF into a PowerPoint 2007 presentation, I would use the More Controls dialog in PowerPoint's Developer tab to insert a Shockwave/Flash object. But in PowerPoint 2010, that control is missing from the dialog. Where did it go? When I click the Register Custom DLL, there's no obvious file to choose, either.
Has anyone else run into this? I'm not looking for a way to convert a SWF into a video that can be embedded or using a 3rd-party plug-in or anything like that. I know how to do those things. I'm specifically looking to insert a SWF using only what's built into PowerPoint and Flash, so if anyone has info on it, please let me know!

I have installed PowerPoint 2010 beta release on my machine. I was able to attach a SWF file to the presentation successfully. All options to insert a video are located on the Insert tab, in the Media group. Please refer to the link below on how to insert a flash movie to the presentation.
http://office.microsoft.com/en-us/powerpoint-help/embed-a-video-in-your-presentation-HA010 374729.aspx?CTT=5&origin=HA010338310
Also Microsoft have provided support for Flash in PowerPoint 2010. To find the list of supported formats please visit the following link:
http://office.microsoft.com/en-us/powerpoint-help/compatible-audio-and-video-file-formats- in-powerpoint-2010-HA010336709.aspx?CTT=1

Indesign - Exporting PDF which has Transparency getting error in PITSTOP

Hi all,
Recently we are getting jobs which has" transparency" - effects used. We are getting problem when we run PITSTOP.
We have an Indesign file with transparency in Opening page of an article. One background Image is there, over the image a strip which is drawn using "box" and applied "Transparency - Multiply" effect so that the image can see through it.
We exported the file using distiller "PDF/X-1a" and created PDF. Once we run the PITSTOP to check the PDF we are getting error.
"Effective resolution of color or grayscale image is less than 200 dpi"
This error is showing in the" Stip" which is drawn in Indesign.
The problem here is when we export the file in "PDF/X-1a" the transparency getting flattern because of this the strip become image and showing low res. in PITSTOP.
We have increased the Transparency Flatten Preset Option from 1200 to 2400, still the problem was not solved.
Expecting a solution for this all types of suggestions are welcome.
Shaji

Shaji,
I think I wasn't clear in my last post. The mesh resolution should NOT be below 200. But it sounds like that isn't the issue after all.
When you select that background image in InDesign and look at the Info Panel, what do you see for "effective" ppi?
Peter

DPM 2010 - Getting errors when viewing reports

Microsoft DPM Forum,
I am getting the following error when attempting to view reports in DPM 2010:
An error occurred during client rendering.
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'DLS'. (rsErrorOpeningConnection)
Cannot open database "DPMDB" requested by the login. The login failed. Login failed for user 'servername\DPMR$servername'.
This is occurring after I rebuilt the OS on the DPM server to resolve a "tape system disconnect" issue that plagued us since November of 2013.
Any idea how to resolve this?
Thanks in advance,
Joe

Mike,
Thank you for that post. Yes, I saw that while I was researching a possible solution to the problem. No dice. However, I reached out to Prosenjit Kanjilal of the Microsoft DPM Support Team (as he was emailing me on our re-occurring issue
of Event ID: 15 errors - see other thread). He had me do the following:
Open SQL Studio and connect to the instance
Go to Security->Logins
Now Add 'servername\DPMR$servername' if it is not already added
I also had to add the
dbowner role to the DPMDB database under 'user mapping' for this specific user to actually resolve the issue. The user wasn't listed in the Logins in SQL Studio.
Thanks again!
Joe

[Solved] Unable to insert records, trigger is showing mutating error

Friends,
I created a procedure
===>>
SQL> CREATE OR REPLACE PROCEDURE PO_RECEIVINGS_ASSETS_TR_P
2 IS
3 CURSOR CUR_LAST_DAY_RCV IS
4 SELECT * FROM PO_RECEIVINGS_INSTANT_V WHERE TRANSACTION_ID = (SELECT MAX(TRANSACTION_ID) FROM PO_RECEIVINGS_INSTANT_V);
5 BEGIN
6 FOR REC_LAST_DAY_RCV IN CUR_LAST_DAY_RCV
7 LOOP
8 FOR i IN 1 .. REC_LAST_DAY_RCV.QUANTITY
9 LOOP
10 INSERT INTO ND_TEST VALUES(REC_LAST_DAY_RCV.TRANSACTION_ID, REC_LAST_DAY_RCV.CREATION_DATE, REC_LAST_DAY_RCV.QUANTITY,
11 REC_LAST_DAY_RCV.PO_LINE_ID);
12 END LOOP;
13 END LOOP;
14 END;
15 /
Procedure created.
<<===
then created a trigger to insert record in ND_TEST when a record is inserted in RCV_TRANSACTIONS_ND
===>>
SQL> CREATE OR REPLACE TRIGGER PO_RECEIVINGS_INTO_ASSETS_TR
2 AFTER INSERT ON RCV_TRANSACTIONS_ND
3 FOR EACH ROW
4 BEGIN
5 IF :NEW.TRANSACTION_TYPE = 'ACCEPT' THEN
6 PO_RECEIVINGS_ASSETS_TR_P;
7 END IF;
8 END;
9 /
Trigger created.
<<===
when I try to insert record in RCV_TRANSACTIONS_ND, I get below lines.
===>>
SQL> INSERT INTO RCV_TRANSACTIONS_ND (TRANSACTION_ID,LAST_UPDATE_DATE,LAST_UPDATED_BY,CREATION_DATE,
2 CREATED_BY,TRANSACTION_TYPE,TRANSACTION_DATE, QUANTITY, UNIT_OF_MEASURE, SHIPMENT_HEADER_ID,
3 SHIPMENT_LINE_ID,USER_ENTERED_FLAG, PO_HEADER_ID, PO_LINE_ID)
4 VALUES(1001001,SYSDATE,3572,SYSDATE,3572,'ACCEPT',SYSDATE,1,'Nos',199999,199099,'Y',133032,1679
29);
INSERT INTO RCV_TRANSACTIONS_ND (TRANSACTION_ID,LAST_UPDATE_DATE,LAST_UPDATED_BY,CREATION_DATE,
ERROR at line 1:
ORA-04091: table RCV_TRANSACTIONS_ND is mutating, trigger/function may not
see it
ORA-06512: at "PO_RECEIVINGS_ASSETS_TR_P", line 4
ORA-06512: at "PO_RECEIVINGS_ASSETS_TR_P", line 6
ORA-06512: at "PO_RECEIVINGS_INTO_ASSETS_TR", line 3
ORA-04088: error during execution of trigger
'PO_RECEIVINGS_INTO_ASSETS_TR'
<<===
Using Database 9i.

Well, I tried to solve it and it worked.
SQL> CREATE OR REPLACE PROCEDURE PO_RECEIVINGS_ASSETS_TR_P(VAL1 IN NUMBER, VAL2 IN DATE, VAL3 IN NUMBER, VAL4 IN NUMBER)
2 IS
3 BEGIN
4 FOR i IN 1 .. VAL3
5 LOOP
6 INSERT INTO ND_TEST VALUES(VAL1, VAL2, VAL3, VAL4);
7 END LOOP;
8 END;
9 /
Procedure created.
===
SQL> CREATE OR REPLACE TRIGGER PO_RECEIVINGS_INTO_ASSETS_TR
2 AFTER INSERT ON RCV_TRANSACTIONS_ND
3 FOR EACH ROW
4 BEGIN
5 IF :NEW.TRANSACTION_TYPE = 'ACCEPT' THEN
6 PO_RECEIVINGS_ASSETS_TR_P(:NEW.TRANSACTION_ID, :NEW.CREATION_DATE, :NEW.QUANTITY, :NEW.PO_LINE_ID);
7 END IF;
8 END;
9 /
Trigger created.
===
SQL> INSERT INTO RCV_TRANSACTIONS_ND (TRANSACTION_ID,LAST_UPDATE_DATE,LAST_UPDATED_BY,CREATION_DATE,
2 CREATED_BY,TRANSACTION_TYPE,TRANSACTION_DATE, QUANTITY, UNIT_OF_MEASURE, SHIPMENT_HEADER_ID,
3 SHIPMENT_LINE_ID,USER_ENTERED_FLAG, PO_HEADER_ID, PO_LINE_ID)
4 VALUES(1001001,SYSDATE,3572,SYSDATE,3572,'ACCEPT',SYSDATE,1,'Nos',199999,199099,'Y',133032,1679
29);
1 row created.
===
Thanks everyone

Unable to Insert PDF to Powerpoint 2010 getting error

Similar Messages

Maybe you are looking for