Unable to install 1.5 SDK on Windows 2000

Hello:
When I ran the install program for jdk 1.4.2, it came back with an error
message, "Java (tm) Update cannot retrieve version information from the
targeted directory" and when I acknowledged this error message, it came up
with another error message, "Error 1722. There is a problem with this Windows
Installer package. A program run as part of the setup did not finish as
expected. Contact your support personnel or package vendor."
After dismissing this window, I see that the SDK was installed. However, I
don't see a Java icon in the control panel.
Please advise.
Venkat

Chuck:
The directory has only valid characters. As a matter of fact, I selected the directory from the list box.
Venkat

Similar Messages

Unable to install Net8 on Dell P4 Windows 2000 machines

We are unable to install Oracle 8i on our new Dell P4 Windows 2000 machines. The error comes from jrew.exe.
The following is the error messages that appears when trying to configure Net8 on these machines:
java.lang.ExceptionInInitializerError
     at oracle.ewt.UIManager._loadUserProperties(Unknown Source)
     at oracle.ewt.UIManager._initialize(Compiled Code)
     at oracle.ewt.UIManager._maybeInitialize(Unknown Source)
     at oracle.ewt.UIManager.getLookAndFeel(Unknown Source)
     at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
     at oracle.net.ca.NetCA.<init>(NetCA.java)
     at oracle.net.ca.NetCA.main(NetCA.java)
Exception in thread "main"
This is the detail for Net8 Configuration Assistant message.
Any help is appreciated.
Thanks
Mike

There is a KB on the web that explains how to get over this problem and the reference number for this is 2U6ETM44
I have also attached a copy of MSIBlast to make your life doing this a little easier.
Good luck, and hope this helps
Attachments:
msiBlast.exe ‏232 KB

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Unable to Install Crystal Reports 2008 on Windows 7 64 bit

Hi,
I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
BR, Nanda Kishore

i INSTALLED NOW

Unable to install C4500 HP printer on Windows 7

unable to install C4500 HP printer on Windows 7 - printer installation disc only supported by xp and vista. What do I need to do??
This question was solved.
View Solution.

Hi,
You may download the Windows7 compatible software below:
http://ftp.hp.com/pub/softlib/software11/COL30130/mp-74912-1/PS_AIO_04_C4500_USW_Full_Win_WW_130_140...
Make sure the USB cable is unplug before performing the installation.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to install Adobe CS2 Premium on Windows OS 7. How do I fix this ?

I am unable to install Adobe CS2 Premium on Windows OS 7. My discs require activation but do install to the OS. The non-activation version recommended gives the error message that" this version is not compatible wih OS" and will not install.
Thanks, Liz

Hi Issieoo,
Though you may install Cs2 on Windows but you may face performace issue. Please find the System Requirement for installing for one of the CS2 product: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html . However I would recommend you to purchase the new CC realease with more enhanced functionalities and features.
Regards,
Romit Sinha

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

Unable to install oracle 8 i on windows vista

Hi all,
I cannot installed my oracle 8i on my new laptop purchase with windows vista . I do everything but at last the programms are all download on my machine. Perhaps a problem of compatibility perhaps . I am in trouble . Because i need it to updates my datasbefore migrating in the server. What can i do to solve this problem of compatibility with installation. Please help me to fix this problem.
Thanks, Welcome, user575726

There is a specific version of Oracle 10g for Windows Vista. I even hear that Oracle 10g XE will work too; however, I have only tried oracle 10g for vista.
Both Oracle 8i and 9i are unsupported on vista.
Install Windows XP Pro on your laptop instead of Windows Vista.
Or, if you need to install 8i or 9i on Vista, may I suggest installing a virtual machine running Windows 2000 or Windows XP on top of Vista. Then in this vm, install Oracle 8i or 9i.
There is microsoft virtual pc 2007, vmware worktation 6.0, and parallels. I'm not sure if qemu or bochs will work. Note, you must have vista business premium or ultimate to be able to run a virtual machine in it according to the vista end user license.

How to install Developer 10g suite on windows 2000

Hello
I downloaded the two files namely ds_windows_x86_101202_disk1 and
ds_windows_x86_101202_disk2.
When I try to install these after extracting to one temp folder and when I run the setup
on windows 2000 OS, I am always getting the the error insert disk 1 or specify the location of the product .
Please suggest how to proceed.
Also if I extract the above files can I proceed with that or are there are any additional files to be extracted. I fact I went through all the files and folders and whereever there was archive files I have extracted them.
I need urgent help to install these files.
Thanks in advance

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rajesh at [email protected]:
I am trying to install Oracle 8 Enterprose on
Windows 2000 , but I am geting OS Error
at the beginging of the installation.
Does anybody knows whether I can install
Oracle on Windows 2000?<HR></BLOCKQUOTE>
Hi Rajesh borikar,
I encounter similar problem as you. If you have any clues, please let me know too..thanks
regards
Andrew
null

Unable to install Directory Sync tool in windows server 2008 R2 Eneterprise

Hi,
I am unable to install Directory Sync in windows server 2008 R2 Eneterprise.i have joined my machine domain joined computer running Windows Server 2008 r2 enterprise,when i click dirsync.exe then gives below Error.
The Windows Azure Active Directory Sync tool must be installed on a domain joined computer running Windows Server 2008 Service Pack 2 or later,or Windows Server 2008 r2 Service Pack 1 or later
Please help on this why this happing when i try to installed DirSync software.
Regards
Anil Kumar

Hi,
have you already installed .net framwork 3.5 and 4.5.1 on that machine?
http://technet.microsoft.com/en-us/library/jj151831.aspx
Also make sure that you run the install command from an elevated command prompt.
Hope that helps,
Lutz

Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit.

Unable to install 6.0.2 on Windows XP

Hi,
During installation of TimesTen 6.0.2 on Windows XP I got the following error:
"Unable to create the registry key
,SOFTWARE\TimesTen"
I did a "Typical" installation and just clicked Next in every dialog.
I tryed to install the Oracle Times Ten In-Memory Database and not the
Cache Connect.

There has been a change in the Operating system security policy on Windows XP SP2 (and also Windows 2000 SP4 and Windows 2003), I have seen other users encountering the same "Unable to Create Registry Key" error message due to the lack of a new privilege "Impersonate a client after authentication".
The Windows installer in TimesTen uses InstallShield; the installer calls the InstallShield function to create the registy key for HKLM\TimesTen.
Please check out this InstallShield knowledge base article for more information about the cause and solution to this issue.
http://support.installshield.com/kb/view.asp?articleid=Q111303%20
Simon

Unable to install officejet 6100 driver on windows 7

Hi I am unable to install the HP6100 Officejet All in one driver for WIndows 7 enterprise. I keep receiving an error indicating that MSVCR90.dll is missing, but the file is there. Any help would be appreciated.

Hello jm092749.
Welcome to the HP Forums.
I understand you are seeing a "MSVCR90.dll is missing" error when trying to install your printer. I will do my best to assist you with this.
This issue can be hardware or software-related. I located a complete guide to troubleshoot this issue. If you follow the instructions in order, you should be able to resolve the issue: How To Fix Msvcr90.dll Not Found or Missing Errors
I believe the issue will be resolved after following these steps. If not, the computer is facing a hardware issue, and will likely need to be repaired. Either way, please post your results. If this was the information you are looking for, please mark this post with an Accepted Solution and Kudos. Doing this will allow others to locate this information easily.
Thank you for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

Unable to install SQL 2012 Enterprise on Windows 8.1 OS

I had installed SQL 2012 Enterprise on my Windows 8.1 and was running successfully. I faced some SSRS & SSIS Authentication issue. So i decided to uninstall SQL and re-install it. On doing so, i am unable to install it.
Wizard disappears from this screenshot onwards.
Tried installing from Command Prompt.
Setup.exe /q /ACTION=Repair /INSTANCENAME=instancename /IAcceptSqlserverLicenseTerms=true
Still wizard disappears.

Hello,
I guess un-installation of SQL server is not complete and there are fragments remaining.Have you made sure you have uninstalled SQL server from add remove program completely.Make sure no features related to SQL server are present there.Please remove setup
support files as well.Refer below link to remove it completely
http://technet.microsoft.com/en-us/library/hh231731.aspx
Similar issue docemented here
If you face any issue below manual method for removing SQL server will be helpful
1. Uninstall the existing SQL Server 2012 and all the components from the control panel.
    2. Backup the registry.
    3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
    4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
    5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
    6. Rename all the SQL Server folders in the computer.
    7. Reboot the machine.
Revert if you face any issue.
EDIT: IMP POINT installation of SQL server 2012 Enterprise edition On win 8.1 ( client OS machine) is not supported by MS.But it will not stop you from installation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to install 1.5 SDK on Windows 2000

Similar Messages

Maybe you are looking for