Unable to install 10.10.2 Combo Update

I am running OS X 10.10 on a Mac Pro with a RAID 5 set up. I have two RAID volumes. One for the OS/Apps and one for Data/Content.
I am unable to install to the RAID volume. See attached screen shot:
Any ideas what the issue is? Thanks.

keg55 wrote:
Not for the 10.10.2 Combo update.
System Requirements
OS X Yosemite 10.10
OS X Yosemite 10.10.2 Combo Update

Similar Messages

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537 HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
If you need more details, please tell me & Thanks in advance

Checkout this Microsoft article: http://support.microsoft.com/kb/976982
It has some resolution steps that may help.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Unable to install the 7.0.4 update

Unable to install the 7.0.4 update it keeps on saying update could not be installed because you are not connected to the Internet even though I am connected to the Internet

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Connect to wifi and try again.
 Cheers, Tom

Unable to install or start phone software update components -Arc S

I cannot update my xperia arc S. It always ended up showing this "
Unable to install or start phone software update components". Can anyone, help me?
Solved!
Go to Solution.

SUS ( Sony Update Service) ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
or
http://www.sonymobile.com/global-en/tools/update-service/
Both the links are same
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

20 inch Aluminum iMac crashes after installing Mac OS X Combo Update 10.5.6

I have a school lab with 22 of the new 20 inch Aluminum iMacs. They all have been having a problem with crashing after someone logs onto my network server, which is still running the 10.4 Tiger version of the Apple server. They run fine if you boot up and log on as a local user, and they seem to run fine when you boot up and log on to with a server account, but when you log off from the server, about five seconds later while the aurora screen is still showing, they crash and give you the Apple version of the "blue screen of death."
I was told that the fix was to download the combo update separately from the Apple website and use that to reinstall and update the operating system.
I downloaded and tried installing with a 10.5.6.dmg file and a 10.5.6.dmg.smi file, but they both crashed.
Where can I find the "fixed" version of this update or is there some other fix?
I have tested this on 9 or 10 different systems.
The first file was MacOSXUpdCombo10.5.6.dmg, which is a disk image file that is 668.8 MB or 684,774 KB.
I looked in the discussion groups on the Apple web site and found some discussions for problems that seemed similar to, but not quite the same as my own. They led me to a file MacOSXUpdCombo10.5.6.dmg.smi, which a self mounting image file that is also 668.8 MB. I tried it and got the same result.
I can install my dvd, which gives me 10.5.1, which will log off and reboot correctly.
I can then install several miscellaneous upgrades:
Pro Apps Update 2006-02 V1.0
AirPort Utility V5.3.2
Remote Desktop Client V3.2.2
QuickTime V7.6
iTunes V8.0.2
and also
Front Row V2.1.6
The system will then log onto the network, log off and reboot correctly.
But, when I install the 10.5.6 combo update from any of my sources, it boots and logs on fine. But, if I log onto the network, it crashes when I log off.
Where do I go from here?
Thanks for your help.
John R H

Have you tried starting up with your install disk and doing a disk repair?
Put the install disk that came with the Mac in the DVD/CD drive and restart holding down the 'C' key. You can take your finger off once you hear it making noises from the DVD/CD drive. You'll be presented with a screen where you choose your language. At the next screen on the menu bar select Utilities>Disk Utility you then select your Macintosh HD on the left and click on 'repair disk'. If it makes any changes click on 'repair disk' again and repeat the process until you get a clean pass. Once done select restart from the Apple menu and hopefully the Mac will boot normally.

Unable to install Aperture 2.1.4 update on Snow Leopard

Hi Folks,
I have Aperture 2.1 installed on my Mac. When I try to install the 2.1.4 update, it quits by saying "Aperture 2.0 or later is required to install this update". And Snow Leopard wouldn't let me launch Aperture without this update. Has anyone else faced this issue? Any known workarounds?
This is a clean install of Snow Leopard and Aperture.
Also, Software Update doesn't show the Aperture 2.1.4 update either.
Thanks,
Deepak
p.s. As a workaround I am downloading the full 2.1.4 trial which I'll use with my retail serial.

I have been having the same difficulties since installing Snow Leopard. When I perform a "software update" Aperture updates are not listed. I manually downloaded the 2.1.4 update and was then unable to install it for the same reason as above; the original 2.1 version is not recognized as even existing on the computer.
Interestingly, I have the same issue with Safari. The program disappeared from my Mac Pro during the upgrade to Snow Leopard and when I downloaded the latest Safari program and tried to install it, the installer informed me that I had to have OS X v10.5.8 or newer in order to install this program; all partitions on the computer were indicated to be unsuitable for installation including the system (10.6.2) partition. This problem persists. So what gives?
Thanks for any help
Jon

Installing 10.4.9 combo update

hi,
nice to be here as a newbie...
i'm trying to install 10.4.9 as a combo update (can't use software updater cos running pro tools, etc). download of pkg file is ok, but when i run the installer it hits an error half way through downloading and stops.
only reason i can think of is that i started installing it through software updater a few months ago but stopped halfway through the process. so i'm wondering whether there's half a malformed update somewhere on my system that's preventing the shiny new combo update from installing properly.
any ideas? if that sounds likely, no idea how to fix it or where to look for and delete half-downloaded files...
thanks in advance,
nick

*…can't use software updater cos running pro tools, etc.*
AFAIK, that shouldn't preclude using Software Update.
*download of pkg file is ok, but when i run the installer it hits an error half way through downloading and stops*
That's confusing. First, you say the download was OK, then you say that you run the installer and the download halts. If you've downloaded the install package, then installing it shouldn't require any downloading.
*…I'm wondering whether there's half a malformed update somewhere on my system*
Possibly. What's in your download folder? If the package is there, delete it, and download it again. Also consider installing the 10.4.10 COMBO update, instead. You should also check your /Library/Receipts/ folder for MacOSXUpdCombo10.4.9PPC.pkg. If it exists, delete it and try reinstalling.
BTW, you mentioned being a newbie. Is that to using Macs? If so, see my post at http://discussions.apple.com/message.jspa?messageID=5125089 which points to transition documents.

Trouble installing 10.4.3 combo update

I'm trying to install the 10.4.3 combo update on my G5. My HD has the exclamation point over it & I get the "You cannot install Mac OS X Update on this drive" message.
I read some previous posts and I made sure I downloaded the correct update - not the 10.4.3 Server update. I haven't made any modifications to my system and I don't have any anit-virus software.
Help!
Diane
Power Mac G5 Mac OS X (10.4)

Here is the update you want:
http://www.apple.com/support/downloads/macosxupdate1043combo.html
Make sure to repair permissions with Applications -> Utilities -> Disk Utility before and after.
Dismount and disconnect any third party peripherals you have before updating.
If it doesn't work, try creating a secondary user in Apple menu -> System Preferences -> Accounts with Admin access and logging in to it to see if the update doesn't like something installed in the current user.

Why am I unable to install the ios 5.1 update on my ipod touch? Keep getting a message "unable to install".

I am unable to install the ios 5.1 to my ipod touch. I have tried over and over and get the message "unable to install update." My touch has 100% battery charge so I know that is not the problem.

Wifi or USB update? Have you tried the other?
Have you tried reseting the iPod? Notihng is lost?
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Unable to install voiceover, get ipod shuffle update

I'm unable to install Voiceover for my ipod shuffle 4g. When I check the "Enable VoiceOver" box and hit the apply button, I get an error message saying that "You have chosen not to contact the ipod software update server."
Interestingly, I'm also unable to use the update or restore buttons on the same page with my Shuffle. When I use either of those buttons, a dialogue box opens as though I were opening a file.

Sounds like you have some kind of firewall software or something preventing you from connecting to the update servers. Are you running any virus software or other software that blocks internet traffic on your computer? Little snitch does that, but you would know if it is on your system.
i

Unable to install Camera RAW 8.5 update

Hi...
I'm trying to update my Photoshop CC camera raw to the latest version 8.5.
Every time I install the ACR 8.5 update. It is stated as successful. But when I open a raw file, I can see that it is still 8.0.
I have tried uninstalling everything, ie Photoshop, Bridge & CC desktop app, than reinstall. But the outcome is still the same.
I'm using Windows 8.1.

Hi,
You can try this link:
Camera Raw 8.5 and DNG Converter 8.5 now available

Downloaded ios7, but unable to install. Stops at verifying update

I have downloaded ios 7, but after I agree to the terms and conditions, I get an error message that reads " Unable to install"" I have turned phone off and back on. I have deleted almost everything on my phone.
This error message is NOT telling me to try again. It simply says "unable to install"
Anyone?

I must be an idiot. I've searched everywhere but do not see a download for ios7 anywhere on the itunes site. Am I blind?

Unable to install itunes 10.5 after update issue. "windows installer package error"

So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
   • msiexec /unregister
   • msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1.       Choose Start > Computer
2.       In Computer, open the "C:" drive.
3.       Open the Users folder.
4.       Double-click the folder titled with your username.
5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6.       Choose Organize > Folder and Search Options.
7.       Click the View tab.
8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9.       Click OK.
10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11.    Double-click the Local folder to open it.
12.    Right-click on the Temp folder and choose Delete.
13.    In the confirmation dialog that appears click Yes.
14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15.    Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1.       Quit iTunes.
2.       From the Start menu, click Control Panel.
3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4.       Select iTunes from the list of currently installed programs, then click Uninstall.
5.       When asked if you would like to remove iTunes, click Yes.
6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Unable to install Flash 10.0.2 update on Windows 7

Hi to all,
Recently I installed a fresh copy of Windows 7 32 bit on my HP laptop, and installed all the CS4 applications of Design Premium. The installation went fine, and almost all the updates (Photoshop 11.0.1, InDesign 6.0.4, etc..) installed with no problems. The only one It doesn´t allow me to install is the Flash 10.0.2 update. It gives an error that "the installer detected a problem and cannot continue" and then shows some options to ignore the update.
Any suggestions?
Thanks in advance...

I had the same problem - the auto-updater constantly failed to install the update. I ended up resolving the problem by going to
http://download.macromedia.com/pub/flash/updates/10_0_2/win/Flash_10_0_2_AdobeUpdate.exe
and downloading the update manually. It updated fine.
Hope this helps!

Unable to install Bridge CS5 (Windows Vista) update 4.0.2

I'm not able to download the thur updater 4.0.2 error received "Please close the following application to continue." Abode Bridge CS5 (Bridge.exe) but Bridge not not open. Is this similar error anyone else receiving?

It installed fine for me, but didn't fix the MPEG, M4V thumbnail/preview problem I have.
rg

Unable to install 10.10.2 Combo Update

Similar Messages

Maybe you are looking for