Unable to install 10.7.3, checksum error/corrupt file
I am having problems installing 10.7.3, I tried both the combo and software download methods and both result in similar error messages about checksum errors / corrupt file. I have cleared out any previous updates from my update folder, restarted router, restarted imac, tried download several times between last night and today but no getting past the error messages. The software update method tells me the file is corrupt during the restart installation, the combo download displays the error about checksum when I attempt to open it. Also tried from disk utility and get the same message.
Any advice on how to proceed? I currently have 10.7.2 installed, have no problems downloading other files (downloaded some video from itunes & applications recently although not as large as the 1.3G file that 10.7.3 is). My ISP has a download cap so every attempt reduces my retry.
Spoke too late, at the end of the install the summary window reads:
The installation failed
The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Back to square one again. Still on 10.7.2.
First time in my apple owning period I have encountered problems such as this, its all worked up until now!
Similar Messages
-
I am unable to install the creative cloud update - error 43 comes up at around 77%
I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.
WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
Mylenium -
i tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3
Hello mom_5_01,
The following article should be quite beneficial in your endeavor to update your iPad.
iPad: Unable to update or restore
http://support.apple.com/kb/HT4097
You may encounter the following symptoms while updating or restoring your iPad:
iPad continually restarts but never displays the Home screen.
An update or restore did not complete and the iPad is no longer recognized in iTunes.
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
Cheers,
Allen -
Unable to install CS6-exit code 15 error
Unable to install CS6 getting the following error;
Exit Code: 15
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 1 warning(s)
ERROR: ASU has quit unexpectedly.
WARNING: User opted to Cancel the install
Runnin MacBook Pro
13-inch Early 2011
2.3 Ghz Intel Core i5
4 GB 1333 Mhz DDR3
Intel HD Graphics 3000 384 mm
Mac Lion 10.7.3
Any work arounds?Hi,
We are tracking this issue at:
http://forums.adobe.com/thread/978912?tstart=30
Regards,
Ashutosh -
Unable to install photoshop cs4 upgrade. getting error message
unable to install photoshop cs4 upgrade. getting error message
but the error message says that Apple Power PC apps no longer supported.
You still need to contact the manufacturer. You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software -
ITunes.exe - System error / corrupt file
I purchased an iPod nano about a month ago. Since then about every week my entire iPod content is erased while i transfer music to iTunes. All of a sudden it disconnects and says "iTunes.exe - System error / Corrupt file". Each time this happens I need to restore my iPod, which does not help either. I have the latest iTunes version and I downloaded the iPod updater, however none of them make a difference in the situation. I would really like to know whether this can be solved or I need to return the device to the store.
iPod Nano 2GB Windows XPHave a look at this informative link by forum member Da Gopha: Da Gopha - If Windows displays an iTunes.exe corrupt file/chkdsk message
-
I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?
Hi doywks,
The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device. The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system. It's possible that you are not logged in as the administrator for your Windows PC. Or, you may have antivirus software stopping the Apple Mobile Device from running.
If you are having issues updating iTunes on your PC, follow the steps in the article below.
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
https://support.apple.com/en-us/HT203188
I hope this information helps ....
- Judy -
I am unable to install and run the latest version ot iTunes. Getting "Runtime error - R6034. An application has made an attempt to load the C runtime library incorrectly"
Error 7(Windows error 1114)Try and not duplicate these issues and do a search next time.
Now load https://discussions.apple.com/thread/5826672?start=0&tstart=0
and that Topic has the correct information to fix this problem.
Regards
pcbugfixer -
Unable to install iTunes, I get the following error:
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Unable to install new iOS 6 software error 3004
I am unable to install new iOS 6 software on my ipod 4 touch getting unknown error 3004
mardanlou_ali wrote:
unable to install update iOS 6.1.3
Check that yours is not an iPad 1
Identify iPad Models...
http://support.apple.com/kb/HT5452
If it is ... iOS 5.1.1 is as far as it will go. -
Itunes 11 unable to install due to administrator privledges error
Hi.
I attempted to update form Itunes 10 to Itunes 11 via the apple software update application but it failes to install due to an error.
So i tried to download Itunes 11 manually from the website and when I do it this way I get an error saying unable to install because I dont have administrator privledges. So I have to cancel the installation and back out.
What do I need to do resolve this issue?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Unable to install SQL Server 2012 Standard: Error code 0x851A0019
Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeemHi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem -
Hard drive error - Corrupt files - Archive and Install?
Hi
I have been using Onyx for a while and last week it asked me to reinstall the Snow Leopard disc. I verified this in Disk Utility first and that also advised I had corrupt files. I installed the disc and all seemed fine when i checked again in Disk Utility. But now a week later I have the same problem and not sure whether it is a problem with 0SX or my hard drive. My mac pro is still under Applecare and they advised tonight that I should do another archive and install and if does not fix then to take the machine into my local Apple store.
Red part of Error message is - Invalid volume file count - it should be 362310 instead of 362313 and Invalid volume directory count - it should be 99776 instead of 99773.
The volume Macintosh HD was found corrupt and needs to be repaired. - Error: This disk needs to be repaired etc.
Has anyone else experienced the same problem. I use Aperture 3 & Final Cut Express and until recently had problems getting the two to work together until Applecare helped.
Many thanks
MattOther people have certainly experienced a corrupt HFS volume header, which is what you have, or did have. It should be a very rare occurrence. If it happens frequently, then your drive is probably failing and should be replaced.
-
Hello everyone...
I wasn't sure where to put this, I hope this is right. I did a search on this but couldn't find anything relating to my problem.
Anyway, I have this 2 year old Seagate FreeAgentDesktop 250GB drive that's been causing me nothing but trouble for most of the time that I've owned it. It was fine for the first few months (HFS+ Journaled reformat), but then it started acting up. File transfers would interrupt at random because the file being transferred was "in use", which it clearly wasn't. It wouldn't unmount anymore because the drive was "in use", even when it clearly wasn't.
The data was very corrupted, opening video files either gave a "-50 error" in quicktime, or it wouldn't open because the file was "in use". I wasn't able to delete files either. Sometimes I got lucky and it would start working again after a restart or after pulling the usb plug.
I got fed up with it and put it in its box.
Now I'm in need of external space again, so I decided to give this drive another try. Verifying and repairing the disk with Disk Utility were both unsuccessful. I ended up reformatting it on a windows machine and then again with Disk Utility in Mac OS Extended. But I'm getting the same exact problems again after moving 2 or 3 files to the disk.
Is this a software problem? Hardware? It's still in warranty but I want to be sure that it's faulty. Is anyone else having these problems?
Here's a list of errors that I'm getting:
- "The operation can’t be completed because the item “-” is in use." upon trying to move a file to the drive.
- "The operation can’t be completed because one or more required items can’t be found.
(Error code -43)" upon trying to delete a file.
- When opening an .avi file, I either get error -50, "file in use" or the file opens with a 00:00:00 duration.
- "The file “-.jpg” could not be opened. It may be damaged or use a file format that Preview doesn’t recognize." upon opening a .jpg file.
Here's the info:
Name : Seagate FreeAgentDesktop Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk1
Media Name : Seagate FreeAgentDesktop Media
Media Type : Generic
Connection Bus : USB
USB Serial Number : 6****Q
Device Tree : IODeviceTree:/PCI0/EHC2@1A,7
Writable : Yes
Ejectable : Yes
Location : External
Total Capacity : 250.06 GB (250,059,350,016 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0I'm not a hardware expert, but Seagate had a major HD firmware issue earlier this year:
http://www.macintouch.com/readerreports/harddrives/topic3441.html#d17jan2009 -
Unable to install on Mac due to errors
Hi there,
Am finding it hard to install Adobe Premiere, Elements 10 on a very new MacBook Pro.
Started with 3rd Disk as that is what was advised. But gets to last part of installation and has the following errors:
CAN ANYONE TELL ME HOW TO SORT THIS - ADOBE don't seem to have any support numbers that we can contact.
Thanks,
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 10 error(s), 7 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 -----------
ERROR: DF037: Unable to delete directory "/Applications/Adobe"(Seq 2161)
ERROR: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2161)
----------- Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Smartsound2: Install failedFollow the steps in the KB, this will help :-
http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html
Maybe you are looking for
-
I'M trying to view a movie on my iPad but it wont play but a few seconds at a time How do I make it play the movie without stopping all the time
-
How to change MANAGED-BEAN-SCOPE??????
Hi Gurus, How to change the managed-bean-scope? In my ADF application I have created one backing bean which has attched with the page fragment. I cant able to set the bean scope other than REQUEST.... If I set the bean scope request, then page and th
-
I wasn't really sure where to place this thread but here goes. I want to make a simple board game (Checkers or maybe Chess) in two player mode only (One player will come later). I am not sure how exactly to go about it. Are there any special methods
-
Just downloaded OS 10.9. hoped it would fix bugs from the last version. now I can't use my Epson perfection 4870 scanner. Cehcked with Epson. They say the software is an Apple update. checked with Apple-No Go. For now my Scanner just won't work.
-
Why has the total library size gone from my itunes
I downloaded the latest iTunes the other day and now the total library size is missing and the window size is actually too large for my monitor too, though I've not altered any settings. I HATE not having the library size showing at the bottom of t